Skip to contentSkip to conversation

Compilation of Realtek r8169-6.010.00 fails on 2.6.30

DISCUSSION Torsten Mueller 2 participants 2 messages Jun 13, 2009 – Jun 14, 2009

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

Hello,

i have problems compiling the driver for this card. I want to test this driver to check, if it gives more bandwidth in a gigabit network against the stock 2.6.30 vanilla kernel driver.

Can you lead me to a solution for this compilation problem ?

Thanks,
Torsten

slave:/usr/src/rtl8169/r8169-6.010.00 # make clean modules
make -C src/ clean
make[1]: Entering directory `/usr/src/rtl8169/r8169-6.010.00/src'
rm -rf *.o *.ko *~ core* .dep* .*.d .*.cmd *.mod.c *.a *.s .*.flags .tmp_versions Module.symvers Modules.symvers rset modules.order Module.markers make[1]: Leaving directory `/usr/src/rtl8169/r8169-6.010.00/src'
make -C src/ modules
make[1]: Entering directory `/usr/src/rtl8169/r8169-6.010.00/src'
make -C /lib/modules/2.6.30/build SUBDIRS=/usr/src/rtl8169/r8169-6.010.00/src modules
make[2]: Entering directory `/usr/src/linux-2.6.30'
CC [M] /usr/src/rtl8169/r8169-6.010.00/src/r8169_n.o
/usr/src/rtl8169/r8169-6.010.00/src/r8169_n.c: In function ‘rtl8169_open’:
/usr/src/rtl8169/r8169-6.010.00/src/r8169_n.c:2753: warning: passing argument 2 of ‘request_irq’ from incompatible pointer type /usr/src/rtl8169/r8169-6.010.00/src/r8169_n.c: In function ‘rtl8169_interrupt’:
/usr/src/rtl8169/r8169-6.010.00/src/r8169_n.c:3682: error: implicit declaration of function ‘netif_rx_schedule_prep’ /usr/src/rtl8169/r8169-6.010.00/src/r8169_n.c:3683: error: implicit declaration of function ‘__netif_rx_schedule’ /usr/src/rtl8169/r8169-6.010.00/src/r8169_n.c:3714: error: expected expression before ‘)’ token /usr/src/rtl8169/r8169-6.010.00/src/r8169_n.c:3714: warning: ‘return’ with a value, in function returning void /usr/src/rtl8169/r8169-6.010.00/src/r8169_n.c: In function ‘rtl8169_poll’:
/usr/src/rtl8169/r8169-6.010.00/src/r8169_n.c:3735: error: implicit declaration of function ‘netif_rx_complete’
make[3]: *** [/usr/src/rtl8169/r8169-6.010.00/src/r8169_n.o] Error 1
make[2]: *** [_module_/usr/src/rtl8169/r8169-6.010.00/src] Error 2
make[2]: Leaving directory `/usr/src/linux-2.6.30'
make[1]: *** [modules] Error 2
make[1]: Leaving directory `/usr/src/rtl8169/r8169-6.010.00/src'
make: *** [modules] Error 2

slave:/usr/src/rtl8169/r8169-6.010.00 # uname -a
Linux slave 2.6.30 #2 Sat Jun 13 23:31:10 CEST 2009 i686 athlon i386 GNU/Linux slave:/usr/src/rtl8169/r8169-6.010.00 #

#1 lore raw

Torsten Mueller <[email protected]> :
[...]

Quoted 6 lines

i have problems compiling the driver for this card. I want to test this driver to check, if it gives more bandwidth in a gigabit network against the stock 2.6.30 vanilla kernel driver.

Can you lead me to a solution for this compilation problem ?

Check your LINUX_VERSION_CODE and analyze the output of

$ git log -p -- drivers/net/r8169.c | less +/netif_rx_schedule_prep

Do you have specific problems with the kernel included r8169 driver ?

The one in 2.6.30 should not be too bad (as long as your chipset is supported of course).

Signature · 1 line
Ueimor