omap3: moved reset_cpu function to omap3
PATCH 1/1 omap3: moved reset_cpu function to omap3
Because this function is soc specific, it should be moved to omap3
Signed-off-by Minkyu Kang <[email protected]>
--- cpu/arm_cortexa8/omap3/interrupts.c | 14 ++++++++++++++ cpu/arm_cortexa8/start.S | 14 -------------- 2 files changed, 14 insertions(+), 14 deletions(-)
cpu/arm_cortexa8/omap3/interrupts.c +14 -0
@@ -70,6 +70,20 @@ int disable_interrupts(void) }#endif +void reset_cpu (ulong ignored) +{ +prm_t *prm_base = (prm_t *)PRM_BASE ; + +writel (0x2 , &prm_base->rstctrl); + +while (1 ) { +if (serial_tstc ()) { +serial_getc (); +break ; + } + } +} +void bad_mode (void ) {panic ("Resetting CPU ...\n" );
cpu/arm_cortexa8/start.S +0 -14
@@ -500,17 +500,3 @@ finished_inval: @ but we compile with armv5 ldmfd r13!, {r0 - r5, r7, r9 - r12, pc} - - - .align 5 -.global reset_cpu -reset_cpu: - ldr r1, rstctl @ get addr for global reset - @ reg - mov r3, #0x2 @ full reset pll + mpu - str r3, [r1] @ force reset - mov r0, r0 -_loop_forever: - b _loop_forever -rstctl: - .word PRM_RSTCTRL
Signature · 1 line
1.5.4.3
PATCH 1/1 omap3: moved reset_cpu function to omap3
Dear Dirk,
2009/6/18 Minkyu Kang <[email protected]>
Quoted 57 lines
Because this function is soc specific, it should be moved to omap3
Signed-off-by Minkyu Kang <[email protected]>--- cpu/arm_cortexa8/omap3/interrupts.c | 14 ++++++++++++++ cpu/arm_cortexa8/start.S | 14 -------------- 2 files changed, 14 insertions(+), 14 deletions(-)cpu/arm_cortexa8/omap3/interrupts.c +14
-0@@ -70,6 +70,20 @@ int disable_interrupts(void) }#endif +void reset_cpu (ulong ignored) +{ +prm_t *prm_base = (prm_t *)PRM_BASE ; + +writel (0x2 , &prm_base->rstctrl); + +while (1 ) { +if (serial_tstc ()) { +serial_getc (); +break ; + } + } +} +void bad_mode (void ) {panic ("Resetting CPU ...\n" );cpu/arm_cortexa8/start.S +0
-15@@ -500,17 +500,3 @@ finished_inval: @ but we compile with armv5 ldmfd r13!, {r0 - r5, r7, r9 - r12, pc} - - - .align 5 -.global reset_cpu -reset_cpu: - ldr r1, rstctl @ get addr for global reset - @ reg - mov r3, #0x2 @ full reset pll + mpu - str r3, [r1] @ force reset - mov r0, r0 -_loop_forever: - b _loop_forever -rstctl: - .word PRM_RSTCTRL --
Quoted 2 lines
1.5.4.3
I found previous patch written by you.
http://lists.denx.de/pipermail/u-boot/2009-May/053490.html
<http://lists.denx.de/pipermail/u-boot/2009-May/053490.html>
Please ignore this patch :)
thanks.
Signature · 2 lines
from. prom. promsoft.net