howto get the nand flash enviroment variables in env_init ?
Hello,
I want to use the "silent" paramter of ubbot in a dynamically way. The problem is that I use a Nand Flash to store my uboot paramters.
When the function env_init is called only the default enviroment is linked as the actual enviroment.
After env_init the serial console is initialized and the banner is printed.
I want to read out my actual uboot paramters from NAND to check the silent paramter before any character is sent through the Serial-Console.
I placed the functions nand_init(); and env_relocate(); into the function env_init, buth that desn?t work.
(I think there is always a reset ?!)
Could anybody help me please ?
Thanks
Manuel
Quoted 10 lines · Manuel Sahm
Hello,
I want to use the "silent" paramter of ubbot in a dynamically way. The problem is that I use a Nand Flash to store my uboot paramters.
When the function
env_initis called only the default enviroment is linked as the actual enviroment.
Afterenv_initthe serial console is initialized and the banner is printed.
Quoted 6 lines
I want to read out my actual uboot paramters from NAND to check the silent paramter before any character is sent through the Serial-Console.
I placed the functionsnand_init(); andenv_relocate(); into the functionenv_init, buth that desn?t work.
(I think there is always a reset ?!)
Doesn't this patch help:
http://lists.denx.de/pipermail/u-boot/2009-May/052901.html
Thanks
Guennadi
---
Guennadi Liakhovetski, Ph.D.
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de
[U-Boot] howto get the nand flash enviroment variables inenv_init ?
Hello,
thanks for reply,
this patch is very good in general, but the problem is that the function nand_boot() is never called in my architecture. I use a AT91SAM9G20 from Atmel [ARM9].
Do oyu have another idea ?
Thanks a lot
Manuel
Quoted 1 line
Quoted 1 line
Quoted 1 line
Guennadi Liakhovetski <[email protected]> 18.06.2009 11:39 >>>
Quoted 10 lines · Manuel Sahm
Hello,
I want to use the "silent" paramter of ubbot in a dynamically way. The problem is that I use a Nand Flash to store my uboot paramters.
When the function
env_initis called only the default enviroment is linked as the actual enviroment.
Afterenv_initthe serial console is initialized and the banner is printed.
Quoted 6 lines
I want to read out my actual uboot paramters from NAND to check the silent paramter before any character is sent through the Serial-Console.
I placed the functionsnand_init(); andenv_relocate(); into the functionenv_init, buth that desn?t work.
(I think there is always a reset ?!)
Doesn't this patch help:
http://lists.denx.de/pipermail/u-boot/2009-May/052901.html
Thanks
Guennadi
---
Guennadi Liakhovetski, Ph.D.
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de
_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
[U-Boot] howto get the nand flash enviroment variables inenv_init ?
Quoted 1 line · Manuel Sahm
Hello,
Please, do not top-post.
Quoted 7 lines
thanks for reply,
this patch is very good in general, but the problem is that the function
nand_boot()is never called in my architecture. I use a AT91SAM9G20 from Atmel [ARM9].Do oyu have another idea ?
You mean you boot from another memory (NOR) and have your environment in NAND? I think, this is one of configurations, that we said noone would ever come up with... Maybe I'm wrong though, see if others correct me.
Thanks
Guennadi
---
Guennadi Liakhovetski, Ph.D.
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de
[U-Boot] howto get the nand flash enviroment variables inenv_init ?
Quoted 1 line
Quoted 1 line
Quoted 1 line
Guennadi Liakhovetski <[email protected]> 18.06.2009 13:23 >>>
Quoted 1 line · Manuel Sahm
Hello,
Please, do not top-post.
Quoted 7 lines
thanks for reply,
this patch is very good in general, but the problem is that the function
nand_boot()is never called in my architecture. I use a AT91SAM9G20 from Atmel [ARM9].Do oyu have another idea ?
You mean you boot from another memory (NOR) and have your environment in NAND? I think, this is one of configurations, that we said noone would ever come up with... Maybe I'm wrong though, see if others correct me.
Thanks
Guennadi
---
Guennadi Liakhovetski, Ph.D.
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de
Hello,
all is inside the NAND flash,
0x00000 First Level Bootloader (which loads the UBoot from 0x20000 to RAM and execute it) 0x20000 UBoot0x60000 UBootEnviroment0x80000 UBoot Enviroment Rendundant
So have a look at /lib_arm/board.c
The function nand_init() and env_relocate() sre called too late for the "silent" flag.
I tried to place the functions nand_init() and env_relocate() into the function env_init(), but that crashes...?
Thanks for help
Manuel
[U-Boot] howto get the nand flash enviroment variables inenv_init ?
Quoted 6 lines · Manuel Sahm
Quoted 1 line
Quoted 1 line
Quoted 1 line
Guennadi Liakhovetski <[email protected]> 18.06.2009 13:23 >>>
Quoted 1 line · Manuel Sahm
Hello,
Please, do not top-post.
Also, please use quote markers and trim what you're not immediately replying to.
Quoted 4 lines
Hello,
all is inside the NAND flash,
0x00000First Level Bootloader (which loads the UBoot from0x20000to RAM and execute it)
I guess this is something other than u-boot's own NAND loader -- that would complicate any effort to use u-boot's NAND loader to load the environment.
Quoted 8 lines
0x20000UBoot0x60000UBootEnviroment0x80000UBoot Enviroment RendundantSo have a look at /lib_arm/board.c
The functionnand_init()andenv_relocate()sre called too late for the "silent" flag.I tried to place the functions
nand_init()andenv_relocate()into the functionenv_init(), but that crashes...?
The full NAND subsystem will not work before relocation.
Here are some options (not of equal desireability):
- Switch to using u-boot's NAND loader, and use Guennadi's patch.
- Extend your external NAND loader to do something similar to Guennadi's patch.
- Use code similar to the NAND loader to fetch the environment into a cache-locked buffer (or search through it as you read it).
- Embed your environment into the u-boot image.
- Make the console unconditionally silent until after the environment is read from NAND normally.
- Put NOR on your board. :-)
-Scott