Skip to contentSkip to conversation

device-mapper: ioctl error adding target to table, lvm will not mount

DISCUSSION Michael Ole Olsen 1 participant 2 messages Jul 1, 2009 MD RAID

lore
Share & tools
lore
#0 lore raw

With a new compiled kernel from kernel.org 2.6.30 and lvm2,dmsetup from lenny repos i keep getting:

# vgchange -a y

device-mapper ioctl: error adding target to table
table: device 9:0 too small for target
table: 253:11: linear: dm-linear Device lookup failed
device-mapper: reload ioctl failed: Invalid argument

I have everything compiled into the kernel, also DM, not as module.

but it did say:
12 logical volume(s) in volume group st1500 now active

and i can see them in /dev/mapper

if i tried to mount each of them it said:
mount: you must specify the filesystem type

or some other weird error message
i do have xfs in my kernel and can mount other xfs filesystems but all my dm filesystems fail for some reason

Here is my config

root@mlap:~/mfs# grep CONFIG_DM .config
CONFIG_DMI=y
# CONFIG_DM_DEBUG is not set
CONFIG_DM_CRYPT=y
# CONFIG_DM_SNAPSHOT is not set
CONFIG_DM_MIRROR=y
CONFIG_DM_ZERO=y
CONFIG_DM_MULTIPATH=y
# CONFIG_DM_DELAY is not set
# CONFIG_DM_UEVENT is not set
# CONFIG_DM9102 is not set
CONFIG_DMADEVICES=y
CONFIG_DMIID=y
# CONFIG_DMA_API_DEBUG is not set
root@mlap:~/mfs# grep CONFIG_XFS .config
CONFIG_XFS_FS=y
CONFIG_XFS_QUOTA=y
CONFIG_XFS_POSIX_ACL=y
# CONFIG_XFS_RT is not set
# CONFIG_XFS_DEBUG is not set
root@mlap:~/mfs# grep CONFIG_MD .config
CONFIG_MD=y
CONFIG_MD_AUTODETECT=y
CONFIG_MD_LINEAR=y
# CONFIG_MD_RAID0 is not set
CONFIG_MD_RAID1=y
CONFIG_MD_RAID10=y
CONFIG_MD_RAID456=y
CONFIG_MD_RAID6_PQ=y
# CONFIG_MD_MULTIPATH is not set
CONFIG_MD_FAULTY=y
# CONFIG_MDIO_BITBANG is not set

Any ideas what I am missing ?

mdadm is active on the raid, 10 of 10 disks are up and /dev/mapper/st1500-bigdaddy exists, i just cannot mount it, i could do this before kernel and system upgrade
(i use an other lenny install now, but i updated udev,dmsetup, cryptsetup,lvm2 to most recent versions on it)

#1 lore raw

I tried with dm and md as a module using initramfs now also without luck

and upgrading/downgrading udev,dmsetup,cryptsetup,lvm2 to lenny,testing,unstable (all at once back and forth) to see if that helped

also i tried a kernel option i found on the net something like DM_IOCTL_V4=y but the kernel config just deleted it.

cannot seem to get it to work, tried compiling the kernel a few times also.

Quoted 70 lines · Michael Ole Olsen

With a new compiled kernel from kernel.org 2.6.30 and lvm2,dmsetup from lenny repos i keep getting:

# vgchange -a y

device-mapper ioctl: error adding target to table
table: device 9:0 too small for target
table: 253:11: linear: dm-linear Device lookup failed
device-mapper: reload ioctl failed: Invalid argument

I have everything compiled into the kernel, also DM, not as module.

but it did say:
12 logical volume(s) in volume group st1500 now active

and i can see them in /dev/mapper

if i tried to mount each of them it said:
mount: you must specify the filesystem type

or some other weird error message
i do have xfs in my kernel and can mount other xfs filesystems but all my dm filesystems fail for some reason

Here is my config

root@mlap:~/mfs# grep CONFIG_DM .config
CONFIG_DMI=y
# CONFIG_DM_DEBUG is not set
CONFIG_DM_CRYPT=y
# CONFIG_DM_SNAPSHOT is not set
CONFIG_DM_MIRROR=y
CONFIG_DM_ZERO=y
CONFIG_DM_MULTIPATH=y
# CONFIG_DM_DELAY is not set
# CONFIG_DM_UEVENT is not set
# CONFIG_DM9102 is not set
CONFIG_DMADEVICES=y
CONFIG_DMIID=y
# CONFIG_DMA_API_DEBUG is not set
root@mlap:~/mfs# grep CONFIG_XFS .config
CONFIG_XFS_FS=y
CONFIG_XFS_QUOTA=y
CONFIG_XFS_POSIX_ACL=y
# CONFIG_XFS_RT is not set
# CONFIG_XFS_DEBUG is not set
root@mlap:~/mfs# grep CONFIG_MD .config
CONFIG_MD=y
CONFIG_MD_AUTODETECT=y
CONFIG_MD_LINEAR=y
# CONFIG_MD_RAID0 is not set
CONFIG_MD_RAID1=y
CONFIG_MD_RAID10=y
CONFIG_MD_RAID456=y
CONFIG_MD_RAID6_PQ=y
# CONFIG_MD_MULTIPATH is not set
CONFIG_MD_FAULTY=y
# CONFIG_MDIO_BITBANG is not set

Any ideas what I am missing ?

mdadm is active on the raid, 10 of 10 disks are up and /dev/mapper/st1500-bigdaddy exists, i just cannot mount it, i could do this before kernel and system upgrade
(i use an other lenny install now, but i updated udev,dmsetup, cryptsetup,lvm2 to most recent versions on it)

Signature · 3 lines
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html