Assigned a static SMI address to all UECs TBIPA address.
PATCH 1/1 Assigned a static SMI address to all UECs TBIPA address.
From 092396fa161036fc9754296269c510e76910c756 Mon Sep 17 00:00:00 2001
From: Richard Retanubun <[email protected]>
Date: Tue, 2 Jun 2009 11:31:05 -0400
Subject: [PATCH] Assigned a static SMI address to all UECs TBIPA address.
It is set to 0x1F by default and can be overwritten on the board header file by defining CONFIG_UTBIPAR_INIT_TBIPA. This allows the CPU to simply "reserve" one SMI address instead of using a different one for each UEC.
--- drivers/qe/uec.c | 17 +++++++++-------- 1 files changed, 9 insertions(+), 8 deletions(-)
drivers/qe/uec.c +9 -8
@@ -31,6 +31,11 @@#include "uec_phy.h" #include "miiphy.h" +/* Default UTBIPAR SMI address */ +#ifndef CONFIG_UTBIPAR_INIT_TBIPA +#define CONFIG_UTBIPAR_INIT_TBIPA 0x1F +#endif + #ifdef CONFIG_UEC_ETH1 static uec_info_t eth1_uec_info = { .uf_info = {
@@ -1179,15 +1184,11 @@ static int uec_startup(uec_private_t *uec) utbipar =in_be32 (&uec_regs->utbipar); utbipar &= ~UTBIPAR_PHY_ADDRESS_MASK ; enet_interface = uec->uec_info->enet_interface; -if (enet_interface ==ENET_1000_TBI || - enet_interface ==ENET_1000_RTBI ) { - utbipar |= (uec_info->phy_address + uec_info->uf_info.ucc_num) - <<UTBIPAR_PHY_ADDRESS_SHIFT ; - }else { - utbipar |= (0x10 + uec_info->uf_info.ucc_num) - <<UTBIPAR_PHY_ADDRESS_SHIFT ; - } +/* Initialize UTBIPAR address to CONFIG_UTBIPAR_INIT_TBIPA for ALL UEC. +* This frees up the remaining SMI addresses for use. +*/ + utbipar |=CONFIG_UTBIPAR_INIT_TBIPA <<UTBIPAR_PHY_ADDRESS_SHIFT ;out_be32 (&uec_regs->utbipar, utbipar);/* Allocate Tx BDs */
Signature · 1 line
1.6.2.4