Xeon 5500 series support in kernel
Hi all,
I wonder if there are specific kernel configuration parameters that allow to optimize performances on the recent Xeon 5500 processors (aka Nehalem). In particular, should we set CONFIG_GENERIC_CPU or CONFIG_MCORE2 on such processors ?
Thanks in advance.
Xavier
Quoted 3 lines · xb
I wonder if there are specific kernel configuration parameters that allow to optimize performances on the recent Xeon 5500 processors (aka Nehalem).
The most important optimization is to use a 64bit kernel with NUMA support enabled (even if you use 32bit userland)
Quoted 2 lines
In particular, should we set
CONFIG_GENERIC_CPUorCONFIG_MCORE2on such processors ?
The kernel doesn't really care about compiler optimizations, so it shouldn't make any difference. CONFIG_GENERIC_CPU is fine.
-Andi
Signature · 1 line
[email protected] -- Speaking for myself only.
On 2 Jul 2009, Andi Kleen outgrape:
Quoted 8 lines
Quoted 3 lines · xb
I wonder if there are specific kernel configuration parameters that allow to optimize performances on the recent Xeon 5500 processors (aka Nehalem).
The most important optimization is to use a 64bit kernel with NUMA support enabled (even if you use 32bit userland)
Surely NUMA only benefits you if you have a >1 socket system? Where's the nonuniform access on a 1-socket machine? Every core is as far from all the RAM as every other core, isn't it?
Quoted 4 lines · Nix
On 2 Jul 2009, Andi Kleen outgrape:
Quoted 2 lines
xb <[email protected]> writes:
Quoted 8 lines
Quoted 6 lines
Quoted 3 lines
I wonder if there are specific kernel configuration parameters that allow to optimize performances on the recent Xeon 5500 processors (aka Nehalem).
The most important optimization is to use a 64bit kernel with NUMA support enabled (even if you use 32bit userland)
Surely NUMA only benefits you if you have a >1 socket system? Where's
Xeons are typically multi socket. On single socket the overhead of a NUMA kernel is negligible, so it's best to enable it always.
There are actually some use cases of NUMA kernel code for single socket too, e.g. it is sometimes used to isolate different applications on the VM level.
-Andi
Signature · 1 line
[email protected] -- Speaking for myself only.
Hi Andi,
a general question with regard to the new intel nehalem platform:
Which linux version is needed for an intel nehalem based xeon in view of the new intel 5500/5520 chipset drivers?
Does it work with 2.6.18? (Debian Etch)
thanks
--
Morten
Quoted 7 lines · Morten P.D. Stevens
Hi Andi,
a general question with regard to the new intel nehalem platform:
Which linux version is needed for an intel nehalem based xeon in view of the new intel 5500/5520 chipset drivers?
Does it work with 2.6.18? (Debian Etch)
You would need backported drivers for Ethernet etc; the plain integrated drivers in 2.6.18 will not work. The e1000 project at sourceforge has driver backports for Ethernet.
I don't know if Debian does regular backports of drivers, some other distributions with support for old kernels do.
Also some power saving features and performance features
which are related to power saving (turbo mode) will not work in that old a kernel. For full performance it's better to use newer kernels or kernels with appropiate backports.
-Andi
Signature · 1 line
[email protected] -- Speaking for myself only.