Skip to contentSkip to conversation

libsemanage: maintain disable dontaudit state between handle commits

PATCH In review Christopher Pardy 3 participants 6 messages Jul 7, 2009 SELinux security module

lore
Share & tools
lore
#0 lore raw

PATCH v7 2/2 libsemanage: maintain disable dontaudit state between handle commits

Currently any changes made to the policy which require committing a handle cause dontaudit rules to be re-enabled. This is confusing, and frustrating for users who want to edit policy with dontaudit rules turned off. This patch allows semanage to remember the last state of the dontaudit rules and apply them as default whenever a handle is connected. Additionally other functions may check for the file semanage creates to determine if dontaudit rules are turned on. This knowledge can be useful for tools like SETroubleshoot which may want to change their behavior depending on the state of the dontaudit rules. In the event that a the file cannot be created a call to commit will fail.

---
 libsemanage/include/semanage/handle.h |    3 +++
 libsemanage/src/direct_api.c          |   32 +++++++++++++++++++++++++++++++-
 libsemanage/src/handle.c              |    9 ++++++++-
 libsemanage/src/libsemanage.map       |    2 +-
 libsemanage/src/semanage_store.c      |    1 +
 libsemanage/src/semanage_store.h      |    1 +
 6 files changed, 45 insertions(+), 3 deletions(-)
libsemanage/include/semanage/handle.h +3 -0
diff -urpN selinux.orig2/libsemanage/include/semanage/handle.h selinux.orig3/libsemanage/include/semanage/handle.h
@@ -69,6 +69,9 @@ void semanage_set_rebuild(semanage_handl
  * 1 for yes, 0 for no (default) */
 void semanage_set_create_store(semanage_handle_t * handle, int create_store);
 
+/*Get whether or not to dontaudits will be disabled upon commit */
+int semanage_get_disable_dontaudit(semanage_handle_t * handle);
+
 /* Set whether or not to disable dontaudits upon commit */
 void semanage_set_disable_dontaudit(semanage_handle_t * handle, int disable_dontaudit);
 
libsemanage/src/direct_api.c +31 -1
diff -urpN selinux.orig2/libsemanage/src/direct_api.c selinux.orig3/libsemanage/src/direct_api.c
@@ -20,6 +20,7 @@
  */
 
 #include <sepol/module.h>
+#include <sepol/handle.h>
 #include <selinux/selinux.h>
 
 #include <assert.h>
@@ -111,6 +112,7 @@ int semanage_direct_is_managed(semanage_
 int semanage_direct_connect(semanage_handle_t * sh)
 {
 	char polpath[PATH_MAX];
+	const char *path;
 
 	snprintf(polpath, PATH_MAX, "%s%s", selinux_path(),
 		 sh->conf->store_path);
@@ -223,6 +225,13 @@ int semanage_direct_connect(semanage_han
 	if (bool_activedb_dbase_init(sh, semanage_bool_dbase_active(sh)) < 0)
 		goto err;
 
+	/* set the disable dontaudit value */
+	path = semanage_fname(SEMANAGE_DISABLE_DONTAUDIT);
+	if(access(path,F_OK) == 0)
+		sepol_set_disable_dontaudit(sh->sepolh,1);
+	else
+		sepol_set_disable_dontaudit(sh->sepolh,0);
+
 	return STATUS_SUCCESS;
 
       err:
@@ -645,7 +654,7 @@ static int semanage_direct_commit(semana
 	char **mod_filenames = NULL;
 	char *sorted_fc_buffer = NULL, *sorted_nc_buffer = NULL;
 	size_t sorted_fc_buffer_len = 0, sorted_nc_buffer_len = 0;
-	const char *linked_filename = NULL, *ofilename = NULL;
+	const char *linked_filename = NULL, *ofilename = NULL, *path;
 	sepol_module_package_t *base = NULL;
 	int retval = -1, num_modfiles = 0, i;
 	sepol_policydb_t *out = NULL;
@@ -669,6 +678,27 @@ static int semanage_direct_commit(semana
 	dbase_config_t *pfcontexts = semanage_fcontext_dbase_policy(sh);
 	dbase_config_t *seusers = semanage_seuser_dbase_local(sh);
 
+	/* Immediently create the disable_dontaudit flag */
+	path = semanage_fname(SEMANAGE_DISABLE_DONTAUDIT);
+	if (sepol_get_disable_dontaudit(sh->sepolh) == 1) {
+		FILE *touch;
+		touch = fopen(path,"w");
+		if (touch != NULL) {
+			if (fclose(touch) != 0) {
+				ERR(sh,"Error attempting to create disable_dontaudit flag.");
+				goto cleanup;
+			}
+		} else {
+			ERR(sh,"Error attempting to create disable_dontaudit flag.");
+			goto cleanup;
+		}
+	} else {
+		if (remove(path) == -1 && errno != ENOENT) {
+			ERR(sh,"Error removing the disable_dontaudit flag.");
+			goto cleanup;
+		}
+	}
+
 	/* Before we do anything else, flush the join to its component parts.
 	 * This *does not* flush to disk automatically */
 	if (users->dtable->is_modified(users->dbase)) {
libsemanage/src/handle.c +8 -1
diff -urpN selinux.orig2/libsemanage/src/handle.c selinux.orig3/libsemanage/src/handle.c
@@ -110,6 +110,13 @@ void semanage_set_create_store(semanage_
 	return;
 }
 
+int semanage_get_disable_dontaudit(semanage_handle_t * sh)
+{
+	assert(sh != NULL);
+
+	return sepol_get_disable_dontaudit(sh->sepolh);
+}
+
 void semanage_set_disable_dontaudit(semanage_handle_t * sh, int disable_dontaudit)
 {
 	assert(sh != NULL);
@@ -264,7 +271,7 @@ int semanage_commit(semanage_handle_t * 
 	assert(sh != NULL && sh->funcs != NULL && sh->funcs->commit != NULL);
 	if (!sh->is_in_transaction) {
 		ERR(sh,
-		    "Will not commit because caller does not have a tranaction lock yet.");
+		    "Will not commit because caller does not have a transaction lock yet.");
 		return -1;
 	}
 	retval = sh->funcs->commit(sh);
libsemanage/src/libsemanage.map +1 -1
diff -urpN selinux.orig2/libsemanage/src/libsemanage.map selinux.orig3/libsemanage/src/libsemanage.map
@@ -15,7 +15,7 @@ LIBSEMANAGE_1.0 {
 	  semanage_iface_*; semanage_port_*; semanage_context_*;
 	  semanage_node_*;
 	  semanage_fcontext_*; semanage_access_check; semanage_set_create_store;
-	  semanage_is_connected; semanage_set_disable_dontaudit;
+	  semanage_is_connected; semanage_get_disable_dontaudit; semanage_set_disable_dontaudit;
 	  semanage_mls_enabled;
   local: *;
 };
libsemanage/src/semanage_store.c +1 -0
diff -urpN selinux.orig2/libsemanage/src/semanage_store.c selinux.orig3/libsemanage/src/semanage_store.c
@@ -114,6 +114,7 @@ static const char *semanage_sandbox_path
 	"/users_extra",
 	"/netfilter_contexts",
 	"/file_contexts.homedirs",
+	"/disable_dontaudit",
 };
 
 /* A node used in a linked list of file contexts; used for sorting.
libsemanage/src/semanage_store.h +1 -0
diff -urpN selinux.orig2/libsemanage/src/semanage_store.h selinux.orig3/libsemanage/src/semanage_store.h
@@ -58,6 +58,7 @@ enum semanage_sandbox_defs {
 	SEMANAGE_USERS_EXTRA,
 	SEMANAGE_NC,
 	SEMANAGE_FC_HOMEDIRS,
+	SEMANAGE_DISABLE_DONTAUDIT,
 	SEMANAGE_STORE_NUM_PATHS
 };
 
libsemanage/include/semanage/handle.h +3 -0
diff -urpN selinux.orig2/libsemanage/include/semanage/handle.h selinux.orig3/libsemanage/include/semanage/handle.h
@@ -69,6 +69,9 @@ void semanage_set_rebuild(semanage_handl
  * 1 for yes, 0 for no (default) */
 void semanage_set_create_store(semanage_handle_t * handle, int create_store);
 
+/*Get whether or not to dontaudits will be disabled upon commit */
+int semanage_get_disable_dontaudit(semanage_handle_t * handle);
+
 /* Set whether or not to disable dontaudits upon commit */
 void semanage_set_disable_dontaudit(semanage_handle_t * handle, int disable_dontaudit);
 
libsemanage/src/direct_api.c +31 -1
diff -urpN selinux.orig2/libsemanage/src/direct_api.c selinux.orig3/libsemanage/src/direct_api.c
@@ -20,6 +20,7 @@
  */
 
 #include <sepol/module.h>
+#include <sepol/handle.h>
 #include <selinux/selinux.h>
 
 #include <assert.h>
@@ -111,6 +112,7 @@ int semanage_direct_is_managed(semanage_
 int semanage_direct_connect(semanage_handle_t * sh)
 {
 	char polpath[PATH_MAX];
+	const char *path;
 
 	snprintf(polpath, PATH_MAX, "%s%s", selinux_path(),
 		 sh->conf->store_path);
@@ -223,6 +225,13 @@ int semanage_direct_connect(semanage_han
 	if (bool_activedb_dbase_init(sh, semanage_bool_dbase_active(sh)) < 0)
 		goto err;
 
+	/* set the disable dontaudit value */
+	path = semanage_fname(SEMANAGE_DISABLE_DONTAUDIT);
+	if(access(path,F_OK) == 0)
+		sepol_set_disable_dontaudit(sh->sepolh,1);
+	else
+		sepol_set_disable_dontaudit(sh->sepolh,0);
+
 	return STATUS_SUCCESS;
 
       err:
@@ -645,7 +654,7 @@ static int semanage_direct_commit(semana
 	char **mod_filenames = NULL;
 	char *sorted_fc_buffer = NULL, *sorted_nc_buffer = NULL;
 	size_t sorted_fc_buffer_len = 0, sorted_nc_buffer_len = 0;
-	const char *linked_filename = NULL, *ofilename = NULL;
+	const char *linked_filename = NULL, *ofilename = NULL, *path;
 	sepol_module_package_t *base = NULL;
 	int retval = -1, num_modfiles = 0, i;
 	sepol_policydb_t *out = NULL;
@@ -669,6 +678,27 @@ static int semanage_direct_commit(semana
 	dbase_config_t *pfcontexts = semanage_fcontext_dbase_policy(sh);
 	dbase_config_t *seusers = semanage_seuser_dbase_local(sh);
 
+	/* Immediently create the disable_dontaudit flag */
+	path = semanage_fname(SEMANAGE_DISABLE_DONTAUDIT);
+	if (sepol_get_disable_dontaudit(sh->sepolh) == 1) {
+		FILE *touch;
+		touch = fopen(path,"w");
+		if (touch != NULL) {
+			if (fclose(touch) != 0) {
+				ERR(sh,"Error attempting to create disable_dontaudit flag.");
+				goto cleanup;
+			}
+		} else {
+			ERR(sh,"Error attempting to create disable_dontaudit flag.");
+			goto cleanup;
+		}
+	} else {
+		if (remove(path) == -1 && errno != ENOENT) {
+			ERR(sh,"Error removing the disable_dontaudit flag.");
+			goto cleanup;
+		}
+	}
+
 	/* Before we do anything else, flush the join to its component parts.
 	 * This *does not* flush to disk automatically */
 	if (users->dtable->is_modified(users->dbase)) {
libsemanage/src/handle.c +8 -1
diff -urpN selinux.orig2/libsemanage/src/handle.c selinux.orig3/libsemanage/src/handle.c
@@ -110,6 +110,13 @@ void semanage_set_create_store(semanage_
 	return;
 }
 
+int semanage_get_disable_dontaudit(semanage_handle_t * sh)
+{
+	assert(sh != NULL);
+
+	return sepol_get_disable_dontaudit(sh->sepolh);
+}
+
 void semanage_set_disable_dontaudit(semanage_handle_t * sh, int disable_dontaudit)
 {
 	assert(sh != NULL);
@@ -264,7 +271,7 @@ int semanage_commit(semanage_handle_t * 
 	assert(sh != NULL && sh->funcs != NULL && sh->funcs->commit != NULL);
 	if (!sh->is_in_transaction) {
 		ERR(sh,
-		    "Will not commit because caller does not have a tranaction lock yet.");
+		    "Will not commit because caller does not have a transaction lock yet.");
 		return -1;
 	}
 	retval = sh->funcs->commit(sh);
libsemanage/src/libsemanage.map +1 -1
diff -urpN selinux.orig2/libsemanage/src/libsemanage.map selinux.orig3/libsemanage/src/libsemanage.map
@@ -15,7 +15,7 @@ LIBSEMANAGE_1.0 {
 	  semanage_iface_*; semanage_port_*; semanage_context_*;
 	  semanage_node_*;
 	  semanage_fcontext_*; semanage_access_check; semanage_set_create_store;
-	  semanage_is_connected; semanage_set_disable_dontaudit;
+	  semanage_is_connected; semanage_get_disable_dontaudit; semanage_set_disable_dontaudit;
 	  semanage_mls_enabled;
   local: *;
 };
libsemanage/src/semanage_store.c +1 -0
diff -urpN selinux.orig2/libsemanage/src/semanage_store.c selinux.orig3/libsemanage/src/semanage_store.c
@@ -114,6 +114,7 @@ static const char *semanage_sandbox_path
 	"/users_extra",
 	"/netfilter_contexts",
 	"/file_contexts.homedirs",
+	"/disable_dontaudit",
 };
 
 /* A node used in a linked list of file contexts; used for sorting.
libsemanage/src/semanage_store.h +1 -0
diff -urpN selinux.orig2/libsemanage/src/semanage_store.h selinux.orig3/libsemanage/src/semanage_store.h
@@ -58,6 +58,7 @@ enum semanage_sandbox_defs {
 	SEMANAGE_USERS_EXTRA,
 	SEMANAGE_NC,
 	SEMANAGE_FC_HOMEDIRS,
+	SEMANAGE_DISABLE_DONTAUDIT,
 	SEMANAGE_STORE_NUM_PATHS
 };
 
Acked-by on v7 2/2
#1 lore raw
Quoted 3 lines · Christopher Pardy

Currently any changes made to the policy which require committing a handle cause dontaudit rules to be re-enabled. This is confusing, and frustrating for users who want to edit policy with dontaudit rules turned off. This patch allows semanage to remember the last state of the dontaudit rules and apply them as default whenever a handle is connected. Additionally other functions may check for the file semanage creates to determine if dontaudit rules are turned on. This knowledge can be useful for tools like SETroubleshoot which may want to change their behavior depending on the state of the dontaudit rules. In the event that a the file cannot be created a call to commit will fail.

I'll fix up the duplicate diff (you have a spelling correction that was already committed) and clean up a couple of minor things when I commit it along with the libsepol and semodule patches.

Quoted 154 lines
---
 libsemanage/include/semanage/handle.h |    3 +++
 libsemanage/src/direct_api.c          |   32 +++++++++++++++++++++++++++++++-
 libsemanage/src/handle.c              |    9 ++++++++-
 libsemanage/src/libsemanage.map       |    2 +-
 libsemanage/src/semanage_store.c      |    1 +
 libsemanage/src/semanage_store.h      |    1 +
 6 files changed, 45 insertions(+), 3 deletions(-)

diff -urpN selinux.orig2/libsemanage/include/semanage/handle.h selinux.orig3/libsemanage/include/semanage/handle.h

libsemanage/include/semanage/handle.h +3 -0
@@ -69,6 +69,9 @@ void semanage_set_rebuild(semanage_handl
  * 1 for yes, 0 for no (default) */
 void semanage_set_create_store(semanage_handle_t * handle, int create_store);
 
+/*Get whether or not to dontaudits will be disabled upon commit */
+int semanage_get_disable_dontaudit(semanage_handle_t * handle);
+
 /* Set whether or not to disable dontaudits upon commit */
 void semanage_set_disable_dontaudit(semanage_handle_t * handle, int disable_dontaudit);
 

diff -urpN selinux.orig2/libsemanage/src/direct_api.c selinux.orig3/libsemanage/src/direct_api.c

libsemanage/src/direct_api.c +31 -1
@@ -20,6 +20,7 @@
  */
 
 #include <sepol/module.h>
+#include <sepol/handle.h>
 #include <selinux/selinux.h>
 
 #include <assert.h>
@@ -111,6 +112,7 @@ int semanage_direct_is_managed(semanage_
 int semanage_direct_connect(semanage_handle_t * sh)
 {
 	char polpath[PATH_MAX];
+	const char *path;
 
 	snprintf(polpath, PATH_MAX, "%s%s", selinux_path(),
 		 sh->conf->store_path);
@@ -223,6 +225,13 @@ int semanage_direct_connect(semanage_han
 	if (bool_activedb_dbase_init(sh, semanage_bool_dbase_active(sh)) < 0)
 		goto err;
 
+	/* set the disable dontaudit value */
+	path = semanage_fname(SEMANAGE_DISABLE_DONTAUDIT);
+	if(access(path,F_OK) == 0)
+		sepol_set_disable_dontaudit(sh->sepolh,1);
+	else
+		sepol_set_disable_dontaudit(sh->sepolh,0);
+
 	return STATUS_SUCCESS;
 
       err:
@@ -645,7 +654,7 @@ static int semanage_direct_commit(semana
 	char **mod_filenames = NULL;
 	char *sorted_fc_buffer = NULL, *sorted_nc_buffer = NULL;
 	size_t sorted_fc_buffer_len = 0, sorted_nc_buffer_len = 0;
-	const char *linked_filename = NULL, *ofilename = NULL;
+	const char *linked_filename = NULL, *ofilename = NULL, *path;
 	sepol_module_package_t *base = NULL;
 	int retval = -1, num_modfiles = 0, i;
 	sepol_policydb_t *out = NULL;
@@ -669,6 +678,27 @@ static int semanage_direct_commit(semana
 	dbase_config_t *pfcontexts = semanage_fcontext_dbase_policy(sh);
 	dbase_config_t *seusers = semanage_seuser_dbase_local(sh);
 
+	/* Immediently create the disable_dontaudit flag */
+	path = semanage_fname(SEMANAGE_DISABLE_DONTAUDIT);
+	if (sepol_get_disable_dontaudit(sh->sepolh) == 1) {
+		FILE *touch;
+		touch = fopen(path,"w");
+		if (touch != NULL) {
+			if (fclose(touch) != 0) {
+				ERR(sh,"Error attempting to create disable_dontaudit flag.");
+				goto cleanup;
+			}
+		} else {
+			ERR(sh,"Error attempting to create disable_dontaudit flag.");
+			goto cleanup;
+		}
+	} else {
+		if (remove(path) == -1 && errno != ENOENT) {
+			ERR(sh,"Error removing the disable_dontaudit flag.");
+			goto cleanup;
+		}
+	}
+
 	/* Before we do anything else, flush the join to its component parts.
 	 * This *does not* flush to disk automatically */
 	if (users->dtable->is_modified(users->dbase)) {

diff -urpN selinux.orig2/libsemanage/src/handle.c selinux.orig3/libsemanage/src/handle.c

libsemanage/src/handle.c +8 -1
@@ -110,6 +110,13 @@ void semanage_set_create_store(semanage_
 	return;
 }
 
+int semanage_get_disable_dontaudit(semanage_handle_t * sh)
+{
+	assert(sh != NULL);
+
+	return sepol_get_disable_dontaudit(sh->sepolh);
+}
+
 void semanage_set_disable_dontaudit(semanage_handle_t * sh, int disable_dontaudit)
 {
 	assert(sh != NULL);
@@ -264,7 +271,7 @@ int semanage_commit(semanage_handle_t * 
 	assert(sh != NULL && sh->funcs != NULL && sh->funcs->commit != NULL);
 	if (!sh->is_in_transaction) {
 		ERR(sh,
-		    "Will not commit because caller does not have a tranaction lock yet.");
+		    "Will not commit because caller does not have a transaction lock yet.");
 		return -1;
 	}
 	retval = sh->funcs->commit(sh);

diff -urpN selinux.orig2/libsemanage/src/libsemanage.map selinux.orig3/libsemanage/src/libsemanage.map

libsemanage/src/libsemanage.map +1 -1
@@ -15,7 +15,7 @@ LIBSEMANAGE_1.0 {
 	  semanage_iface_*; semanage_port_*; semanage_context_*;
 	  semanage_node_*;
 	  semanage_fcontext_*; semanage_access_check; semanage_set_create_store;
-	  semanage_is_connected; semanage_set_disable_dontaudit;
+	  semanage_is_connected; semanage_get_disable_dontaudit; semanage_set_disable_dontaudit;
 	  semanage_mls_enabled;
   local: *;
 };

diff -urpN selinux.orig2/libsemanage/src/semanage_store.c selinux.orig3/libsemanage/src/semanage_store.c

libsemanage/src/semanage_store.c +1 -0
@@ -114,6 +114,7 @@ static const char *semanage_sandbox_path
 	"/users_extra",
 	"/netfilter_contexts",
 	"/file_contexts.homedirs",
+	"/disable_dontaudit",
 };
 
 /* A node used in a linked list of file contexts; used for sorting.

diff -urpN selinux.orig2/libsemanage/src/semanage_store.h selinux.orig3/libsemanage/src/semanage_store.h

libsemanage/src/semanage_store.h +1 -0
@@ -58,6 +58,7 @@ enum semanage_sandbox_defs {
 	SEMANAGE_USERS_EXTRA,
 	SEMANAGE_NC,
 	SEMANAGE_FC_HOMEDIRS,
+	SEMANAGE_DISABLE_DONTAUDIT,
 	SEMANAGE_STORE_NUM_PATHS
 };
 
Signature · 8 lines
Stephen Smalley
National Security Agency


--
This message was distributed to subscribers of the selinux mailing list.
If you no longer wish to subscribe, send mail to [email protected] with
the words "unsubscribe selinux" without quotes as the message.
#2 lore raw
Quoted 10 lines · Stephen Smalley
Quoted 3 lines · Christopher Pardy

Currently any changes made to the policy which require committing a handle cause dontaudit rules to be re-enabled. This is confusing, and frustrating for users who want to edit policy with dontaudit rules turned off. This patch allows semanage to remember the last state of the dontaudit rules and apply them as default whenever a handle is connected. Additionally other functions may check for the file semanage creates to determine if dontaudit rules are turned on. This knowledge can be useful for tools like SETroubleshoot which may want to change their behavior depending on the state of the dontaudit rules. In the event that a the file cannot be created a call to commit will fail.

I'll fix up the duplicate diff (you have a spelling correction that was already committed) and clean up a couple of minor things when I commit it along with the libsepol and semodule patches.

Oops. I made a mistake - semanage_fname() is only the file suffix. I'll switch it to use semanage_path(SEMANAGE_TMP, SEMANAGE_DISABLE_DONTAUDIT).

Signature · 8 lines
Stephen Smalley
National Security Agency


--
This message was distributed to subscribers of the selinux mailing list.
If you no longer wish to subscribe, send mail to [email protected] with
the words "unsubscribe selinux" without quotes as the message.
#3 lore raw
Quoted 8 lines · Stephen Smalley
Quoted 7 lines · Stephen Smalley
Quoted 3 lines · Christopher Pardy

Currently any changes made to the policy which require committing a handle cause dontaudit rules to be re-enabled. This is confusing, and frustrating for users who want to edit policy with dontaudit rules turned off. This patch allows semanage to remember the last state of the dontaudit rules and apply them as default whenever a handle is connected. Additionally other functions may check for the file semanage creates to determine if dontaudit rules are turned on. This knowledge can be useful for tools like SETroubleshoot which may want to change their behavior depending on the state of the dontaudit rules. In the event that a the file cannot be created a call to commit will fail.

Quoted 7 lines
Quoted 3 lines

I'll fix up the duplicate diff (you have a spelling correction that was already committed) and clean up a couple of minor things when I commit it along with the libsepol and semodule patches.

Oops. I made a mistake - semanage_fname() is only the file suffix. I'll switch it to use semanage_path(SEMANAGE_TMP, SEMANAGE_DISABLE_DONTAUDIT).

Final version of the patch.

libsemanage/include/semanage/handle.h +3 -0
index 0123d1d..d56db9d 100644
@@ -69,6 +69,9 @@ void semanage_set_rebuild(semanage_handle_t * handle, int do_rebuild);
  * 1 for yes, 0 for no (default) */
 void semanage_set_create_store(semanage_handle_t * handle, int create_store);
 
+/*Get whether or not dontaudits will be disabled upon commit */
+int semanage_get_disable_dontaudit(semanage_handle_t * handle);
+
 /* Set whether or not to disable dontaudits upon commit */
 void semanage_set_disable_dontaudit(semanage_handle_t * handle, int disable_dontaudit);
 
libsemanage/src/direct_api.c +31 -1
index cfc1fed..56f7b05 100644
@@ -20,6 +20,7 @@
  */
 
 #include <sepol/module.h>
+#include <sepol/handle.h>
 #include <selinux/selinux.h>
 
 #include <assert.h>
@@ -111,6 +112,7 @@ int semanage_direct_is_managed(semanage_handle_t * sh)
 int semanage_direct_connect(semanage_handle_t * sh)
 {
 	char polpath[PATH_MAX];
+	const char *path;
 
 	snprintf(polpath, PATH_MAX, "%s%s", selinux_path(),
 		 sh->conf->store_path);
@@ -223,6 +225,13 @@ int semanage_direct_connect(semanage_handle_t * sh)
 	if (bool_activedb_dbase_init(sh, semanage_bool_dbase_active(sh)) < 0)
 		goto err;
 
+	/* set the disable dontaudit value */
+	path = semanage_path(SEMANAGE_ACTIVE, SEMANAGE_DISABLE_DONTAUDIT);
+	if (access(path, F_OK) == 0)
+		sepol_set_disable_dontaudit(sh->sepolh, 1);
+	else
+		sepol_set_disable_dontaudit(sh->sepolh, 0);
+
 	return STATUS_SUCCESS;
 
       err:
@@ -645,7 +654,7 @@ static int semanage_direct_commit(semanage_handle_t * sh)
 	char **mod_filenames = NULL;
 	char *sorted_fc_buffer = NULL, *sorted_nc_buffer = NULL;
 	size_t sorted_fc_buffer_len = 0, sorted_nc_buffer_len = 0;
-	const char *linked_filename = NULL, *ofilename = NULL;
+	const char *linked_filename = NULL, *ofilename = NULL, *path;
 	sepol_module_package_t *base = NULL;
 	int retval = -1, num_modfiles = 0, i;
 	sepol_policydb_t *out = NULL;
@@ -669,6 +678,27 @@ static int semanage_direct_commit(semanage_handle_t * sh)
 	dbase_config_t *pfcontexts = semanage_fcontext_dbase_policy(sh);
 	dbase_config_t *seusers = semanage_seuser_dbase_local(sh);
 
+	/* Create or remove the disable_dontaudit flag file. */
+	path = semanage_path(SEMANAGE_TMP, SEMANAGE_DISABLE_DONTAUDIT);
+	if (sepol_get_disable_dontaudit(sh->sepolh) == 1) {
+		FILE *touch;
+		touch = fopen(path, "w");
+		if (touch != NULL) {
+			if (fclose(touch) != 0) {
+				ERR(sh, "Error attempting to create disable_dontaudit flag.");
+				goto cleanup;
+			}
+		} else {
+			ERR(sh, "Error attempting to create disable_dontaudit flag.");
+			goto cleanup;
+		}
+	} else {
+		if (remove(path) == -1 && errno != ENOENT) {
+			ERR(sh, "Error removing the disable_dontaudit flag.");
+			goto cleanup;
+		}
+	}
+
 	/* Before we do anything else, flush the join to its component parts.
 	 * This *does not* flush to disk automatically */
 	if (users->dtable->is_modified(users->dbase)) {
libsemanage/src/handle.c +7 -0
index d677d3d..0605402 100644
@@ -110,6 +110,13 @@ void semanage_set_create_store(semanage_handle_t * sh, int create_store)
 	return;
 }
 
+int semanage_get_disable_dontaudit(semanage_handle_t * sh)
+{
+	assert(sh != NULL);
+
+	return sepol_get_disable_dontaudit(sh->sepolh);
+}
+
 void semanage_set_disable_dontaudit(semanage_handle_t * sh, int disable_dontaudit)
 {
 	assert(sh != NULL);
libsemanage/src/libsemanage.map +1 -1
index b091344..4c2996e 100644
@@ -15,7 +15,7 @@ LIBSEMANAGE_1.0 {
 	  semanage_iface_*; semanage_port_*; semanage_context_*;
 	  semanage_node_*;
 	  semanage_fcontext_*; semanage_access_check; semanage_set_create_store;
-	  semanage_is_connected; semanage_set_disable_dontaudit;
+	  semanage_is_connected; semanage_get_disable_dontaudit; semanage_set_disable_dontaudit;
 	  semanage_mls_enabled;
   local: *;
 };
libsemanage/src/semanage_store.c +1 -0
index 35999e0..6d4c3ce 100644
@@ -114,6 +114,7 @@ static const char *semanage_sandbox_paths[SEMANAGE_STORE_NUM_PATHS] = {
 	"/users_extra",
 	"/netfilter_contexts",
 	"/file_contexts.homedirs",
+	"/disable_dontaudit",
 };
 
 /* A node used in a linked list of file contexts; used for sorting.
libsemanage/src/semanage_store.h +1 -0
index 3cf33ac..112edb6 100644
@@ -58,6 +58,7 @@ enum semanage_sandbox_defs {
 	SEMANAGE_USERS_EXTRA,
 	SEMANAGE_NC,
 	SEMANAGE_FC_HOMEDIRS,
+	SEMANAGE_DISABLE_DONTAUDIT,
 	SEMANAGE_STORE_NUM_PATHS
 };
 
Signature · 8 lines
Stephen Smalley
National Security Agency


--
This message was distributed to subscribers of the selinux mailing list.
If you no longer wish to subscribe, send mail to [email protected] with
the words "unsubscribe selinux" without quotes as the message.
#4 lore raw
Quoted 18 lines

From: Stephen Smalley [mailto:[email protected]]

Quoted 3 lines · Stephen Smalley
Quoted 2 lines · Stephen Smalley
Quoted 1 line · Christopher Pardy

Currently any changes made to the policy which require

committing a handle cause dontaudit rules to be re-enabled. This is confusing, and frustrating for users who want to edit policy with dontaudit rules turned off. This patch allows semanage to remember the last state of the dontaudit rules and apply them as default whenever a handle is connected. Additionally other functions may check for the file semanage creates to determine if dontaudit rules are turned on. This knowledge can be useful for tools like SETroubleshoot which may want to change their behavior depending on the state of the dontaudit rules. In the event that a the file cannot be created a call to commit will fail.

Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 14 lines
Quoted 5 lines
Quoted 5 lines
Quoted 1 line

I'll fix up the duplicate diff (you have a spelling

correction that

Quoted 1 line
Quoted 1 line

was already committed) and clean up a couple of minor

things when I

Quoted 5 lines
Quoted 1 line

commit it along with the libsepol and semodule patches.

Oops. I made a mistake - semanage_fname() is only the file suffix. I'll switch it to use semanage_path(SEMANAGE_TMP, SEMANAGE_DISABLE_DONTAUDIT).

Quoted 162 lines

Final version of the patch.

libsemanage/include/semanage/handle.h +3 -0
index 0123d1d..d56db9d 100644
@@ -69,6 +69,9 @@ void semanage_set_rebuild(semanage_handle_t 
 * handle, int do_rebuild);
  * 1 for yes, 0 for no (default) */
 void semanage_set_create_store(semanage_handle_t * handle, 
 int create_store);
 
+/*Get whether or not dontaudits will be disabled upon commit */ int 
+semanage_get_disable_dontaudit(semanage_handle_t * handle);
+
 /* Set whether or not to disable dontaudits upon commit */  

void semanage_set_disable_dontaudit(semanage_handle_t * handle, int disable_dontaudit);

(quoted diff) +0 -0

b/libsemanage/src/direct_api.c index cfc1fed..56f7b05 100644

libsemanage/src/direct_api.c +1 -0
@@ -20,6 +20,7 @@
  */
 
 #include <sepol/module.h>
+#include <sepol/handle.h>
 #include <selinux/selinux.h>
 
 #include <assert.h>
@@ -111,6 +112,7 @@ int 

semanage_direct_is_managed(semanage_handle_t * sh) int semanage_direct_connect(semanage_handle_t * sh) {

libsemanage/src/direct_api.c +8 -0
 	char polpath[PATH_MAX];
+	const char *path;
 
 	snprintf(polpath, PATH_MAX, "%s%s", selinux_path(),
 		 sh->conf->store_path);
@@ -223,6 +225,13 @@ int 
 semanage_direct_connect(semanage_handle_t * sh)
 	if (bool_activedb_dbase_init(sh, 
 semanage_bool_dbase_active(sh)) < 0)
 		goto err;
 
+	/* set the disable dontaudit value */
+	path = semanage_path(SEMANAGE_ACTIVE, 
 SEMANAGE_DISABLE_DONTAUDIT);
+	if (access(path, F_OK) == 0)
+		sepol_set_disable_dontaudit(sh->sepolh, 1);
+	else
+		sepol_set_disable_dontaudit(sh->sepolh, 0);
+
libsemanage/src/direct_api.c +1 -1
 	return STATUS_SUCCESS;
 
       err:
@@ -645,7 +654,7 @@ static int 
 semanage_direct_commit(semanage_handle_t * sh)
 	char **mod_filenames = NULL;
 	char *sorted_fc_buffer = NULL, *sorted_nc_buffer = NULL;
 	size_t sorted_fc_buffer_len = 0, sorted_nc_buffer_len = 0;
-	const char *linked_filename = NULL, *ofilename = NULL;
+	const char *linked_filename = NULL, *ofilename = NULL, *path;
 	sepol_module_package_t *base = NULL;
 	int retval = -1, num_modfiles = 0, i;
libsemanage/src/direct_api.c +17 -0
 	sepol_policydb_t *out = NULL;
@@ -669,6 +678,27 @@ static int 
 semanage_direct_commit(semanage_handle_t * sh)
 	dbase_config_t *pfcontexts = semanage_fcontext_dbase_policy(sh);
 	dbase_config_t *seusers = semanage_seuser_dbase_local(sh);
 
+	/* Create or remove the disable_dontaudit flag file. */
+	path = semanage_path(SEMANAGE_TMP, SEMANAGE_DISABLE_DONTAUDIT);
+	if (sepol_get_disable_dontaudit(sh->sepolh) == 1) {
+		FILE *touch;
+		touch = fopen(path, "w");
+		if (touch != NULL) {
+			if (fclose(touch) != 0) {
+				ERR(sh, "Error attempting to 
 create disable_dontaudit flag.");
+				goto cleanup;
+			}
+		} else {
+			ERR(sh, "Error attempting to create 
 disable_dontaudit flag.");
+			goto cleanup;
+		}
+	} else {
+		if (remove(path) == -1 && errno != ENOENT) {
+			ERR(sh, "Error removing the 

disable_dontaudit flag.");

libsemanage/src/direct_api.c +4 -0
+			goto cleanup;
+		}
+	}
+
 	/* Before we do anything else, flush the join to its 

component parts.

libsemanage/src/direct_api.c +0 -1
 	 * This *does not* flush to disk automatically */
 	if (users->dtable->is_modified(users->dbase)) { diff 
--git a/libsemanage/src/handle.c b/libsemanage/src/handle.c 

index d677d3d..0605402 100644

libsemanage/src/handle.c +6 -0
@@ -110,6 +110,13 @@ void 
 semanage_set_create_store(semanage_handle_t * sh, int create_store)
 	return;
 }
 
+int semanage_get_disable_dontaudit(semanage_handle_t * sh) {
+	assert(sh != NULL);
+
+	return sepol_get_disable_dontaudit(sh->sepolh);
+}
+
 void semanage_set_disable_dontaudit(semanage_handle_t * sh, 
 int disable_dontaudit)  {
 	assert(sh != NULL);
(quoted diff) +0 -0

b/libsemanage/src/libsemanage.map index b091344..4c2996e 100644

libsemanage/src/libsemanage.map +2 -1
@@ -15,7 +15,7 @@ LIBSEMANAGE_1.0 {
 	  semanage_iface_*; semanage_port_*; semanage_context_*;
 	  semanage_node_*;
 	  semanage_fcontext_*; semanage_access_check; 
 semanage_set_create_store;
-	  semanage_is_connected; semanage_set_disable_dontaudit;
+	  semanage_is_connected; semanage_get_disable_dontaudit; 
+semanage_set_disable_dontaudit;
 	  semanage_mls_enabled;
   local: *;
 };
libsemanage/src/semanage_store.c +1 -0
index 35999e0..6d4c3ce 100644
@@ -114,6 +114,7 @@ static const char 
 *semanage_sandbox_paths[SEMANAGE_STORE_NUM_PATHS] = {
 	"/users_extra",
 	"/netfilter_contexts",
 	"/file_contexts.homedirs",
+	"/disable_dontaudit",
 };
 

/* A node used in a linked list of file contexts; used for sorting.

libsemanage/src/semanage_store.h +1 -1
index 3cf33ac..112edb6 100644
@@ -58,6 +58,7 @@ enum semanage_sandbox_defs {
 	SEMANAGE_USERS_EXTRA,
 	SEMANAGE_NC,
 	SEMANAGE_FC_HOMEDIRS,
+	SEMANAGE_DISABLE_DONTAUDIT,
 	SEMANAGE_STORE_NUM_PATHS
 };
 
 
--
Quoted 4 lines

Stephen Smalley
National Security Agency

--
This message was distributed to subscribers of the selinux mailing list. If you no longer wish to subscribe, send mail to [email protected] with the words "unsubscribe selinux" without quotes as the message.

#5 lore raw
In reply to Stephen Smalley
Quoted 13 lines · Stephen Smalley
Quoted 12 lines · Stephen Smalley
Quoted 10 lines · Stephen Smalley
Quoted 3 lines · Christopher Pardy

Currently any changes made to the policy which require committing a handle cause dontaudit rules to be re-enabled. This is confusing, and frustrating for users who want to edit policy with dontaudit rules turned off. This patch allows semanage to remember the last state of the dontaudit rules and apply them as default whenever a handle is connected. Additionally other functions may check for the file semanage creates to determine if dontaudit rules are turned on. This knowledge can be useful for tools like SETroubleshoot which may want to change their behavior depending on the state of the dontaudit rules. In the event that a the file cannot be created a call to commit will fail.

I'll fix up the duplicate diff (you have a spelling correction that was already committed) and clean up a couple of minor things when I commit it along with the libsepol and semodule patches.

Quoted 5 lines
Quoted 3 lines

Oops. I made a mistake - semanage_fname() is only the file suffix. I'll switch it to use semanage_path(SEMANAGE_TMP, SEMANAGE_DISABLE_DONTAUDIT).

Final version of the patch.

Merged in libsepol 2.0.37, libsemanage 2.0.33, and policycoreutils 2.0.67.

Signature · 8 lines
Stephen Smalley
National Security Agency


--
This message was distributed to subscribers of the selinux mailing list.
If you no longer wish to subscribe, send mail to [email protected] with
the words "unsubscribe selinux" without quotes as the message.