ARM Cortex A8: Move OMAP3 specific reset handler
PATCH 1/1 ARM Cortex A8: Move OMAP3 specific reset handler
Because of the reset_cpu is soc specific, should be move to soc
--- cpu/arm_cortexa8/omap3/Makefile | 1 + cpu/arm_cortexa8/omap3/reset.S | 36 ++++++++++++++++++++++++++++++++++++ cpu/arm_cortexa8/start.S | 14 -------------- 3 files changed, 37 insertions(+), 14 deletions(-) create mode 100644 cpu/arm_cortexa8/omap3/reset.S
cpu/arm_cortexa8/omap3/Makefile +1 -0
@@ -26,6 +26,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(SOC).a SOBJS := lowlevel_init.o +SOBJS += reset.o COBJS += board.o COBJS += cache.o
cpu/arm_cortexa8/omap3/reset.S new file +36 -0
@@ -0,0 +1,36 @@ +/* + * Copyright (c) 2009 Samsung Electronics. + * Minkyu Kang <[email protected]> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <config.h> + +.global reset_cpu +reset_cpu: + ldr r1, rstctl @ get addr for global reset + @ reg + mov r3, #0x2 @ full reset pll + mpu + str r3, [r1] @ force reset + mov r0, r0 +_loop_forever: + b _loop_forever +rstctl: + .word PRM_RSTCTRL
cpu/arm_cortexa8/start.S +0 -14
@@ -500,17 +500,3 @@ finished_inval: @ but we compile with armv5 ldmfd r13!, {r0 - r5, r7, r9 - r12, pc} - - - .align 5 -.global reset_cpu -reset_cpu: - ldr r1, rstctl @ get addr for global reset - @ reg - mov r3, #0x2 @ full reset pll + mpu - str r3, [r1] @ force reset - mov r0, r0 -_loop_forever: - b _loop_forever -rstctl: - .word PRM_RSTCTRL
Signature · 1 line
1.5.4.3
PATCH 1/1 ARM Cortex A8: Move OMAP3 specific reset handler
Hi,
It's already discussed. Actually it's required for adding new S5PC1xx series based on arm cortext8.
Please apply it.
Thank you,
Kyungmin Park
Quoted 94 lines · Minkyu Kang
Because of the
reset_cpuis soc specific, should be move to socCc Dirk Behme <[email protected]>Signed-off-by Minkyu Kang <[email protected]>---
?cpu/arm_cortexa8/omap3/Makefile | ? ?1 + ?cpu/arm_cortexa8/omap3/reset.S ?| ? 36 ++++++++++++++++++++++++++++++++++++ ?cpu/arm_cortexa8/start.S ? ? ? ?| ? 14 --------------?3 files changed, 37 insertions(+), 14 deletions(-) ?create mode 100644
cpu/arm_cortexa8/omap3/reset.Scpu/arm_cortexa8/omap3/Makefile +0
-0@@ -26,6 +26,7 @@ include $(TOPDIR)/config.mk?LIB ? ?= ?$(obj)lib$(SOC).a
?SOBJS ?:= lowlevel_init.o
+SOBJS ?+= reset.o?COBJS ?+= board.o
?COBJS ?+= cache.ocpu/arm_cortexa8/omap3/reset.S new file +36
-0@@ -0,0 +1,36 @@ +/* + * Copyright (c) 2009 Samsung Electronics. + * Minkyu Kang <[email protected]> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <config.h> + +.global reset_cpu +reset_cpu: + ? ? ? ldr ? ? r1, rstctl ? ? ? ? ? ? ? ? ? ? ?@ get addr for global reset + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? @ reg + ? ? ? mov ? ? r3, #0x2 ? ? ? ? ? ? ? ? ? ? ? ?@ full reset pll + mpu + ? ? ? str ? ? r3, [r1] ? ? ? ? ? ? ? ? ? ? ? ?@ force reset + ? ? ? mov ? ? r0, r0 +_loop_forever: + ? ? ? b ? ? ? _loop_forever +rstctl: + ? ? ? .word ? PRM_RSTCTRLcpu/arm_cortexa8/start.S +0
-0@@ -500,17 +500,3 @@ finished_inval:? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?@ but we compile with armv5
? ? ? ?ldmfd ? r13!, {r0 - r5, r7, r9 - r12, pc}
cpu/arm_cortexa8/start.S +0
-15- - - ? ? ? .align ?5 -.global reset_cpu -reset_cpu: - ? ? ? ldr ? ? r1, rstctl ? ? ? ? ? ? ? ? ? ? ?@ get addr for global reset - ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? @ reg - ? ? ? mov ? ? r3, #0x2 ? ? ? ? ? ? ? ? ? ? ? ?@ full reset pll + mpu - ? ? ? str ? ? r3, [r1] ? ? ? ? ? ? ? ? ? ? ? ?@ force reset - ? ? ? mov ? ? r0, r0 -_loop_forever: - ? ? ? b ? ? ? _loop_forever -rstctl: - ? ? ? .word ? PRM_RSTCTRL --1.5.4.3
_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
PATCH 1/1 ARM Cortex A8: Move OMAP3 specific reset handler
In reply to Minkyu KangQuoted 1 line · Minkyu Kang
Because of the
reset_cpuis soc specific, should be move to soc
Thanks, looks fine for me.
For the archives, this makes
http://lists.denx.de/pipermail/u-boot/2009-May/053490.html
obsolete.
Dirk
Quoted 85 lines
Cc Dirk Behme <[email protected]>Signed-off-by Minkyu Kang <[email protected]>--- cpu/arm_cortexa8/omap3/Makefile | 1 + cpu/arm_cortexa8/omap3/reset.S | 36 ++++++++++++++++++++++++++++++++++++ cpu/arm_cortexa8/start.S | 14 -------------- 3 files changed, 37 insertions(+), 14 deletions(-) create mode 100644 cpu/arm_cortexa8/omap3/reset.Scpu/arm_cortexa8/omap3/Makefile +1
-0@@ -26,6 +26,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(SOC).a SOBJS := lowlevel_init.o +SOBJS += reset.o COBJS += board.o COBJS += cache.ocpu/arm_cortexa8/omap3/reset.S new file +36
-0@@ -0,0 +1,36 @@ +/* + * Copyright (c) 2009 Samsung Electronics. + * Minkyu Kang <[email protected]> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <config.h> + +.global reset_cpu +reset_cpu: + ldr r1, rstctl @ get addr for global reset + @ reg + mov r3, #0x2 @ full reset pll + mpu + str r3, [r1] @ force reset + mov r0, r0 +_loop_forever: + b _loop_forever +rstctl: + .word PRM_RSTCTRLcpu/arm_cortexa8/start.S +0
-14@@ -500,17 +500,3 @@ finished_inval: @ but we compile with armv5 ldmfd r13!, {r0 - r5, r7, r9 - r12, pc} - - - .align 5 -.global reset_cpu -reset_cpu: - ldr r1, rstctl @ get addr for global reset - @ reg - mov r3, #0x2 @ full reset pll + mpu - str r3, [r1] @ force reset - mov r0, r0 -_loop_forever: - b _loop_forever -rstctl: - .word PRM_RSTCTRL
PATCH 1/1 ARM Cortex A8: Move OMAP3 specific reset handler
In reply to Minkyu KangQuoted 10 lines · Minkyu Kang
Because of the
reset_cpuis soc specific, should be move to socCc Dirk Behme <[email protected]>Signed-off-by Minkyu Kang <[email protected]>--- cpu/arm_cortexa8/omap3/Makefile | 1 + cpu/arm_cortexa8/omap3/reset.S | 36 ++++++++++++++++++++++++++++++++++++ cpu/arm_cortexa8/start.S | 14 -------------- 3 files changed, 37 insertions(+), 14 deletions(-) create mode 100644 cpu/arm_cortexa8/omap3/reset.S
applied to u-boot-arm
Best Regards,
J.