Pull request - net
Wolfgang,
The following changes since commit 1bc1538613d66cef3cbce680fc8d7c3561a0fbd0:
Peter Tyser (1):
Move examples/ to examples/standalone
are available in the git repository at:
git://git.denx.de/u-boot-net.git master
Alessio Centazzo (1):
ppc4xx: Fixed compilation warning in 4xx_enet.c
Andreas Pretzsch (1):
smc911x: add support for LAN9221
Ben Warren (2):
Add warning about upcoming removal of old Ethernet API Convert SMC911X Ethernet driver to CONFIG_NET_MULTI API
David Brownell (1):
rm9200 ethernet driver: board-specific quirk (csb337)
Kim Phillips (1):
net: tsec - fix dereferencing type-punned pointer will break strict-aliasing rules warning
Kumar Gala (1):
uec: Fix compile warning
Michael Zaidman (1):
DHCP regression on 2009-06
Mike Frysinger (1):
net: rename NetRxPkt to NetRxPacket
Nobuhiro Iwamatsu (1):
sh: sh_eth: Remove garbage from printf
Poonam Aggrwal (1):
P2020RDB Added support of Vitesse PHYs VSC8641(RGMII) and VSC8221(SGMII)
Prafulla Wadaskar (2):
net: phy: bugfixes: mv88E61xx multichip addressing support
net: Kirkwood_egiga: forced interface speed config support
Richard Retanubun (1):
MIIPHYBB: Return 0xFFFF if the PHY is not asserting TA.
Robin Getz (1):
Add DNS support
Simon Kagstrom (2):
arm: Kirkwood: Fix compiler optimization bug for kwgbe_send
arm: Kirkwood: Check the error summary bit for error detection
Thomas D?rfler (1):
Bugfix: mpc512x_fec MII accesses fail after ethernet transfers
board/bf548-ezkit/bf548-ezkit.c | 8 ++ board/cm-bf548/cm-bf548.c | 10 ++ board/freescale/mx31pdk/mx31pdk.c | 10 ++ board/imx31_litekit/imx31_litekit.c | 10 ++ board/imx31_phycore/imx31_phycore.c | 10 ++ board/micronas/vct/ebi_smc911x.c | 22 +++- board/micronas/vct/vct.c | 10 ++ board/omap3/evm/evm.c | 10 ++ board/renesas/ap325rxa/ap325rxa.c | 10 ++ board/renesas/rsk7203/rsk7203.c | 17 +++- common/cmd_net.c | 49 ++++++++ cpu/arm920t/at91rm9200/ether.c | 22 +++- doc/README.dns | 64 +++++++++++ drivers/net/4xx_enet.c | 3 +- drivers/net/Makefile | 2 +- drivers/net/kirkwood_egiga.c | 57 ++++++++-- drivers/net/kirkwood_egiga.h | 1 + drivers/net/mpc512x_fec.c | 13 ++ drivers/net/phy/miiphybb.c | 7 + drivers/net/phy/mv88e61xx.c | 18 ++-- drivers/net/phy/mv88e61xx.h | 2 +- drivers/net/sh_eth.c | 2 +- drivers/net/smc911x.c | 177 ++++++++++++++++------------- drivers/net/smc911x.h | 170 +++++++++++++++------------- drivers/net/tsec.c | 57 +++++++++- include/configs/ap325rxa.h | 7 +- include/configs/bf548-ezkit.h | 7 +- include/configs/cm-bf548.h | 7 +- include/configs/imx31_litekit.h | 7 +- include/configs/imx31_phycore.h | 7 +- include/configs/mx31pdk.h | 7 +- include/configs/omap3_evm.h | 7 +- include/configs/rsk7203.h | 7 +- include/configs/vct.h | 9 +- include/net.h | 9 +- include/netdev.h | 2 + net/Makefile | 7 +- net/bootp.c | 2 +- net/dns.c | 211 +++++++++++++++++++++++++++++++++++ net/dns.h | 39 +++++++ net/eth.c | 2 + net/net.c | 40 ++++++- 42 files changed, 902 insertions(+), 236 deletions(-) create mode 100644 doc/README.dns create mode 100644 net/dns.c create mode 100644 net/dns.h
regards,
Ben
Dear Ben Warren,
Quoted 51 lines · In message <[email protected]> you wrote:
Wolfgang,
The following changes since commit
1bc1538613d66cef3cbce680fc8d7c3561a0fbd0:
Peter Tyser (1):
Move examples/ to examples/standaloneare available in the git repository at:
git://git.denx.de/u-boot-net.gitmasterAlessio Centazzo (1):
ppc4xx: Fixed compilation warning in4xx_enet.cAndreas Pretzsch (1):
smc911x: add support for LAN9221Ben Warren (2):
Add warning about upcoming removal of old Ethernet API Convert SMC911X Ethernet driver toCONFIG_NET_MULTIAPIDavid Brownell (1):
rm9200 ethernet driver: board-specific quirk (csb337)Kim Phillips (1):
net: tsec - fix dereferencing type-punned pointer will break strict-aliasing rules warningKumar Gala (1):
uec: Fix compile warningMichael Zaidman (1):
DHCP regression on 2009-06Mike Frysinger (1):
net: rename NetRxPkt to NetRxPacketNobuhiro Iwamatsu (1):
sh:sh_eth: Remove garbage from printfPoonam Aggrwal (1):
P2020RDB Added support of Vitesse PHYs VSC8641(RGMII) and VSC8221(SGMII)Prafulla Wadaskar (2):
net: phy: bugfixes: mv88E61xx multichip addressing support
net:Kirkwood_egiga: forced interface speed config supportRichard Retanubun (1):
MIIPHYBB: Return 0xFFFF if the PHY is not asserting TA.Robin Getz (1):
Add DNS support
Quoted 6 lines
Simon Kagstrom (2):
arm: Kirkwood: Fix compiler optimization bug forkwgbe_send
arm: Kirkwood: Check the error summary bit for error detectionThomas D?rfler (1):
Bugfix:mpc512x_fecMII accesses fail after ethernet transfers
I would like not to include
net: Kirkwood_egiga: forced interface speed config support
yet - not until it is clear if this is really needed as a hard-coded, compile-time selected option.
And I disagree with the implementation of
Bugfix: mpc512x_fec MII accesses fail after ethernet transfers
Best regards,
Wolfgang Denk
Signature · 6 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
C++ was an interesting and valuable experiment, but we've learned its
lessons and it's time to move on.
- Peter Curran in <[email protected]>Quoted 20 lines
-----Original Message-----
From: u-boot-bounces at lists.denx.de [mailto:u-boot-bounces at lists.denx.de] On Behalf Of Wolfgang Denk
Sent: Tuesday, July 21, 2009 1:19 PM
To: Ben Warren
Cc: U-Boot
Subject: Re: [U-Boot] Pull request - netDear Ben Warren,
Quoted 3 lines · In message <[email protected]> you wrote:
Wolfgang,
The following changes since commit
1bc1538613d66cef3cbce680fc8d7c3561a0fbd0:Quoted 3 lines
Peter Tyser (1):
Move examples/ to examples/standalone
<snip>
Quoted 6 lines
Quoted 6 lines
VSC8221(SGMII)
Prafulla Wadaskar (2):
net: phy: bugfixes: mv88E61xx multichip addressing support
net:Kirkwood_egiga: forced interface speed config support
<snip>
Quoted 7 lines
I would like not to include
net:
Kirkwood_egiga: forced interface speed config supportyet - not until it is clear if this is really needed as a hard-coded, compile-time selected option.
Dear Wolfgang
By default Auto negotiation for interface speed is enabled (hard coded). Until if some one configures, forced interface speed will not be active. I could not find other option at this moment to set it other way.
NOT including this patch will break RD6281A board network functionality. I am still discovering why it is not working with auto negotiation enabled.
Regards..
Prafulla . .
Quoted 25 lines
And I disagree with the implementation of
Bugfix:
mpc512x_fecMII accesses fail after ethernet transfersBest regards,
Wolfgang Denk
Signature · 11 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de C++ was an interesting and valuable experiment, but we've learned its lessons and it's time to move on. - Peter Curran in <[email protected]> _______________________________________________ U-Boot mailing list U-Boot at lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
Dear Prafulla Wadaskar,
Quoted 7 lines · In message <[email protected]>…
By default Auto negotiation for interface speed is enabled (hard coded). Until if some one configures, forced interface speed will not be active. I could not find other option at this moment to set it other way.
NOT including this patch will break RD6281A board network functionality. I am still discovering why it is not working with auto negotiation enabled.
What happens if you use the RD6281A board with autoneg enabled, and then use MII commands to chose a specific setting before running the first network related command? Is my assumption correct that this will work?
Best regards,
Wolfgang Denk
Signature · 4 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de The only perfect science is hind-sight.