Add AVR32 LCD support
PATCH v2 1/1 Add AVR32 LCD support
This patch adds support for the AVR32 LCD controller. This patch is based off the latest u-boot-video.
A quick summary of what's going on:-
Enable LCDC pixel clock
Enable LCDC port pins
Add framebuffer pointer to global_data struct
Allocate framebuffer
To use the new code, update your board config to include something like this:-
#define CONFIG_LCD 1
#if defined(CONFIG_LCD)
#define CONFIG_CMD_BMP
#define CONFIG_ATMEL_LCD 1
#define LCD_BPP LCD_COLOR16
#define CONFIG_BMP_16BPP 1
#define CONFIG_FB_ADDR 0x10600000
#define CONFIG_WHITE_ON_BLACK 1
#define CONFIG_VIDEO_BMP_GZIP 1
#define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE 262144
#define CONFIG_ATMEL_LCD_BGR555 1
#define CONFIG_SYS_CONSOLE_IS_IN_ENV 1
#define CONFIG_SPLASH_SCREEN 1
#endif
The standard U-Boot BMP and Splash-screen features should just work.
--- cpu/at32ap/at32ap700x/clk.c | 5 + cpu/at32ap/at32ap700x/portmux.c | 90 +++++++++++++++++++++ include/asm-avr32/arch-at32ap700x/chip-features.h | 5 + include/asm-avr32/arch-at32ap700x/clk.h | 6 ++ include/asm-avr32/arch-at32ap700x/portmux.h | 5 +- include/asm-avr32/global_data.h | 3 + lib_avr32/board.c | 11 +++ 7 files changed, 124 insertions(+), 1 deletions(-)
cpu/at32ap/at32ap700x/clk.c +5 -0
@@ -65,6 +65,11 @@ void clk_init(void)#ifdef CONFIG_PLL /* Use PLL0 as main clock */ sm_writel (PM_MCCTRL ,SM_BIT (PLLSEL )); + +#ifdef CONFIG_LCD +/* Set up pixel clock for the LCDC */ +sm_writel (PM_GCCTRL (7 ),SM_BIT (PLLSEL ) |SM_BIT (CEN )); +#endif #endif }
cpu/at32ap/at32ap700x/portmux.c +90 -0
93 lines not on this page · raw message
include/asm-avr32/arch-at32ap700x/chip-features.h +5 -0
@@ -32,4 +32,9 @@#define AT32AP700x_CHIP_HAS_MACB#endif +/* AP7000 and AP7002 have LCD controller, but AP7001 does not */ +#if defined(CONFIG_AT32AP7000 ) || defined(CONFIG_AT32AP7002 ) +#define AT32AP700x_CHIP_HAS_LCDC +#endif +#endif /* __ASM_AVR32_ARCH_CHIP_FEATURES_H__ */
include/asm-avr32/arch-at32ap700x/clk.h +6 -0
@@ -83,6 +83,12 @@ static inline unsigned long get_spi_clk_rate(unsigned int dev_id) return get_pba_clk_rate(); }#endif +#ifdef AT32AP700x_CHIP_HAS_LCDC +static inline unsigned long get_lcdc_clk_rate (unsigned int dev_id) +{ +return get_hsb_clk_rate (); +} +#endif extern void clk_init (void );
include/asm-avr32/arch-at32ap700x/portmux.h +4 -1
@@ -85,5 +85,8 @@ void portmux_enable_mmci(unsigned int slot, unsigned long flags,void portmux_enable_spi0 (unsigned long cs_mask,unsigned long drive_strength);void portmux_enable_spi1 (unsigned long cs_mask,unsigned long drive_strength);#endif - +#ifdef AT32AP700x_CHIP_HAS_LCDC +void portmux_enable_lcdc (int pin_config); +#endif +#endif /* __ASM_AVR32_ARCH_PORTMUX_H__ */
include/asm-avr32/global_data.h +3 -0
@@ -42,6 +42,9 @@ typedef struct global_data {unsigned long env_addr;/* Address of env struct */ unsigned long env_valid;/* Checksum of env valid? */ unsigned long cpu_hz;/* cpu core clock frequency */ +#if defined(CONFIG_LCD ) +void *fb_base;/* framebuffer address */ +#endif void **jt;/* jump table */ } gd_t;
lib_avr32/board.c +11 -0
@@ -239,6 +239,17 @@ void board_init_f(ulong board_type) addr -=CONFIG_SYS_DMA_ALLOC_LEN ;#endif +#ifdef CONFIG_LCD +#ifdef CONFIG_FB_ADDR +printf ("LCD: Frame buffer allocated@preset 0x%08x\n" ,CONFIG_FB_ADDR ); + gd->fb_base = (void *)CONFIG_FB_ADDR ; +#else + addr =lcd_setmem (addr); +printf ("LCD: Frame buffer allocated at 0x%08lx\n" , addr); + gd->fb_base = (void *)addr; +#endif /* CONFIG_FB_ADDR */ +#endif /* CONFIG_LCD */ +/* Allocate a Board Info struct on a word boundary */ addr -=sizeof (bd_t); addr &= ~3UL ;
PATCH v2 1/1 Add AVR32 LCD support
Quoted 32 lines · Mark Jackson
This patch adds support for the AVR32 LCD controller. This patch is based off the latest u-boot-video.
A quick summary of what's going on:-
Enable LCDC pixel clock
Enable LCDC port pins
Add framebuffer pointer toglobal_datastruct
Allocate framebufferTo use the new code, update your board config to include something like this:-
#define
CONFIG_LCD1#if
defined(CONFIG_LCD)
#defineCONFIG_CMD_BMP
#defineCONFIG_ATMEL_LCD1
#defineLCD_BPPLCD_COLOR16
#defineCONFIG_BMP_16BPP1
#defineCONFIG_FB_ADDR0x10600000
#defineCONFIG_WHITE_ON_BLACK1
#defineCONFIG_VIDEO_BMP_GZIP1
#defineCONFIG_SYS_VIDEO_LOGO_MAX_SIZE262144
#defineCONFIG_ATMEL_LCD_BGR5551
#defineCONFIG_SYS_CONSOLE_IS_IN_ENV1
#defineCONFIG_SPLASH_SCREEN1
#endifThe standard U-Boot BMP and Splash-screen features should just work.
Signed-off-by Mark Jackson <[email protected]>
Quoted 9 lines
--- cpu/at32ap/at32ap700x/clk.c | 5 + cpu/at32ap/at32ap700x/portmux.c | 90 +++++++++++++++++++++ include/asm-avr32/arch-at32ap700x/chip-features.h | 5 + include/asm-avr32/arch-at32ap700x/clk.h | 6 ++ include/asm-avr32/arch-at32ap700x/portmux.h | 5 +- include/asm-avr32/global_data.h | 3 + lib_avr32/board.c | 11 +++ 7 files changed, 124 insertions(+), 1 deletions(-)
Applied to u-boot-video. Thanks!
Best regards,
Anatolij