Terratec Cinergy HibridT XS
hi all,
I own a Terratec Cinergy HibridT XS
with lsusb ID:
Bus 001 Device 007:
ID 0ccd:0042 TerraTec Electronic GmbH Cinergy Hybrid T XS
With past kernel and a patch as suggested here:
http://www.linuxtv.org/wiki/index.php/TerraTec
that link to:
http://www.linuxtv.org/wiki/index.php/TerraTec_Cinergy_Hybrid_T_USB_XS
that link to:
http://mcentral.de/wiki/index.php5/Main_Page
and some troubles for Ubuntu kernel that I solved here:
https://bugs.launchpad.net/bugs/322732
worked well for a year or more.
With last Ubuntu 9.04, kernel 2.6.28-13 seems have native support for the tuner, but from dmesg a file is missing: xc3028-v27.fw (maybe manage I2C for IR?)
I found it on a web site, copied in /lib/firmware
and now Kaffeine work, but ... no more IR remote command work.
More bad now:
http://mcentral.de/wiki/index.php5/Installation_Guide
sell TV tuner, and do not support anymore the Terratec tuner, the source repository is disappeared, and install instruction is a commercial.
Any chanches?
thanks in advace,
Valerio
Quoted 29 lines · Valerio Messina
hi all,
I own a Terratec Cinergy HibridT XS
with lsusb ID:
Bus 001 Device 007:
ID 0ccd:0042 TerraTec Electronic GmbH Cinergy Hybrid T XSWith past kernel and a patch as suggested here:
http://www.linuxtv.org/wiki/index.php/TerraTec
that link to:
http://www.linuxtv.org/wiki/index.php/TerraTec_Cinergy_Hybrid_T_USB_XS
that link to:
http://mcentral.de/wiki/index.php5/Main_Page
and some troubles for Ubuntu kernel that I solved here:
https://bugs.launchpad.net/bugs/322732
worked well for a year or more.With last Ubuntu 9.04, kernel 2.6.28-13 seems have native support for the tuner, but from dmesg a file is missing: xc3028-v27.fw
(maybe manage I2C for IR?)
I found it on a web site, copied in/lib/firmware
and now Kaffeine work, but ... no more IR remote command work.More bad now:
http://mcentral.de/wiki/index.php5/Installation_Guide
sell TV tuner, and do not support anymore the Terratec tuner, the source repository is disappeared, and install instruction is a commercial.
Quoted 4 lines
Any chanches?
thanks in advace,
Valerio
That device, including full support for the IR, is now supported in the mainline v4l-dvb tree (and will appear in kernel 2.6.31). Just follow the directions here to get the code:
Devin
Signature · 2 lines
Devin J. Heitmueller - Kernel Labs http://www.kernellabs.com
Hi,
Am Dienstag, den 28.07.2009, 20:44 -0400 schrieb Devin Heitmueller:
Quoted 24 lines · Valerio Messina
Quoted 23 lines
hi all,
I own a Terratec Cinergy HibridT XS
with lsusb ID:
Bus 001 Device 007:
ID 0ccd:0042 TerraTec Electronic GmbH Cinergy Hybrid T XSWith past kernel and a patch as suggested here:
http://www.linuxtv.org/wiki/index.php/TerraTec
that link to:
http://www.linuxtv.org/wiki/index.php/TerraTec_Cinergy_Hybrid_T_USB_XS
that link to:
http://mcentral.de/wiki/index.php5/Main_Page
and some troubles for Ubuntu kernel that I solved here:
https://bugs.launchpad.net/bugs/322732
worked well for a year or more.With last Ubuntu 9.04, kernel 2.6.28-13 seems have native support for the tuner, but from dmesg a file is missing: xc3028-v27.fw
(maybe manage I2C for IR?)
I found it on a web site, copied in/lib/firmware
and now Kaffeine work, but ... no more IR remote command work.
Quoted 4 lines
Quoted 4 lines
More bad now:
http://mcentral.de/wiki/index.php5/Installation_Guide
sell TV tuner, and do not support anymore the Terratec tuner, the source repository is disappeared, and install instruction is a commercial.
all in all it is really funny.
Quoted 5 lines
Quoted 4 lines
Any chanches?
thanks in advace,
Valerio
Quoted 8 lines
That device, including full support for the IR, is now supported in the mainline v4l-dvb tree (and will appear in kernel 2.6.31). Just follow the directions here to get the code:
Devin
Hopefully nobody is mad enough to buy for such prices.
Cheers,
Hermann
Quoted 43 lines · hermann pitton
Hi,
Am Dienstag, den 28.07.2009, 20:44 -0400 schrieb Devin Heitmueller:
Quoted 24 lines · Valerio Messina
Quoted 23 lines
hi all,
I own a Terratec Cinergy HibridT XS
with lsusb ID:
Bus 001 Device 007:
ID 0ccd:0042 TerraTec Electronic GmbH Cinergy Hybrid T XSWith past kernel and a patch as suggested here:
http://www.linuxtv.org/wiki/index.php/TerraTec
that link to:
http://www.linuxtv.org/wiki/index.php/TerraTec_Cinergy_Hybrid_T_USB_XS
that link to:
http://mcentral.de/wiki/index.php5/Main_Page
and some troubles for Ubuntu kernel that I solved here:
https://bugs.launchpad.net/bugs/322732
worked well for a year or more.With last Ubuntu 9.04, kernel 2.6.28-13 seems have native support for the tuner, but from dmesg a file is missing: xc3028-v27.fw
(maybe manage I2C for IR?)
I found it on a web site, copied in/lib/firmware
and now Kaffeine work, but ... no more IR remote command work.Quoted 4 lines
Quoted 4 lines
More bad now:
http://mcentral.de/wiki/index.php5/Installation_Guide
sell TV tuner, and do not support anymore the Terratec tuner, the source repository is disappeared, and install instruction is a commercial.all in all it is really funny.
Quoted 9 lines
Quoted 4 lines
Any chanches?
thanks in advace,
ValerioThat device, including full support for the IR, is now supported in the mainline v4l-dvb tree (and will appear in kernel 2.6.31). Just follow the directions here to get the code:
Quoted 7 lines
Quoted 4 lines
Devin
Hopefully nobody is mad enough to buy for such prices.
compared with other drivers it has some big advantages, eg. automatic audio routing (supports OSS/Alsa/reading audio external) - as tvtime doesn't support audio at all our solution automatically enables audio with it, installation works within a few seconds (everywhere, any distribution, eg eeepc, acer aspire one, ubuntu, redhat, suse..), kernel independent, more or less unix operating system independent as well.
There's nothing comparable available, and it has full support from the chipdesign companies, just about anyone who doesn't know much about linux can easily handle it without the knowledge how to set up a development system. CI Support is on the roadmap as well for DVB-C. While all of that it is still compatible to existing kernel drivers. Updates will also affect all systems at once and won't need a particular kernel versions.
So it is more like a question if someone wants a prebuilt, working car which has guaranteed support, or wants to build his own car both is doable of course.
Best Regards,
Markus
Quoted 18 lines · Markus Rechberger
compared with other drivers it has some big advantages, eg. automatic audio routing (supports OSS/Alsa/reading audio external) - as tvtime doesn't support audio at all our solution automatically enables audio with it, installation works within a few seconds (everywhere, any distribution, eg eeepc, acer aspire one, ubuntu, redhat, suse..), kernel independent, more or less unix operating system independent as well.
There's nothing comparable available, and it has full support from the chipdesign companies, just about anyone who doesn't know much about linux can easily handle it without the knowledge how to set up a development system. CI Support is on the roadmap as well for DVB-C. While all of that it is still compatible to existing kernel drivers. Updates will also affect all systems at once and won't need a particular kernel versions.
So it is more like a question if someone wants a prebuilt, working car which has guaranteed support, or wants to build his own car both is doable of course.
Quoted 3 lines
Best Regards,
Markus
spam is not appreciated on this mailing list
Hi,
Am Mittwoch, den 29.07.2009, 07:45 +0200 schrieb Markus Rechberger:
Quoted 52 lines · hermann pitton
Quoted 43 lines
Hi,
Am Dienstag, den 28.07.2009, 20:44 -0400 schrieb Devin Heitmueller:
Quoted 24 lines · Valerio Messina
Quoted 23 lines
hi all,
I own a Terratec Cinergy HibridT XS
with lsusb ID:
Bus 001 Device 007:
ID 0ccd:0042 TerraTec Electronic GmbH Cinergy Hybrid T XSWith past kernel and a patch as suggested here:
http://www.linuxtv.org/wiki/index.php/TerraTec
that link to:
http://www.linuxtv.org/wiki/index.php/TerraTec_Cinergy_Hybrid_T_USB_XS
that link to:
http://mcentral.de/wiki/index.php5/Main_Page
and some troubles for Ubuntu kernel that I solved here:
https://bugs.launchpad.net/bugs/322732
worked well for a year or more.With last Ubuntu 9.04, kernel 2.6.28-13 seems have native support for the tuner, but from dmesg a file is missing: xc3028-v27.fw
(maybe manage I2C for IR?)
I found it on a web site, copied in/lib/firmware
and now Kaffeine work, but ... no more IR remote command work.Quoted 4 lines
Quoted 4 lines
More bad now:
http://mcentral.de/wiki/index.php5/Installation_Guide
sell TV tuner, and do not support anymore the Terratec tuner, the source repository is disappeared, and install instruction is a commercial.all in all it is really funny.
Quoted 9 lines
Quoted 4 lines
Any chanches?
thanks in advace,
ValerioThat device, including full support for the IR, is now supported in the mainline v4l-dvb tree (and will appear in kernel 2.6.31). Just follow the directions here to get the code:
Quoted 7 lines
Quoted 4 lines
Devin
Hopefully nobody is mad enough to buy for such prices.
Quoted 7 lines
compared with other drivers it has some big advantages, eg. automatic audio routing (supports OSS/Alsa/reading audio external) - as tvtime doesn't support audio at all our solution automatically enables audio with it, installation works within a few seconds (everywhere, any distribution, eg eeepc, acer aspire one, ubuntu, redhat, suse..), kernel independent, more or less unix operating system independent as well.
I really would like to have Billy Biggs opinion on that.
Quoted 10 lines
There's nothing comparable available, and it has full support from the chipdesign companies, just about anyone who doesn't know much about linux can easily handle it without the knowledge how to set up a development system. CI Support is on the roadmap as well for DVB-C. While all of that it is still compatible to existing kernel drivers. Updates will also affect all systems at once and won't need a particular kernel versions.
So it is more like a question if someone wants a prebuilt, working car which has guaranteed support, or wants to build his own car both is doable of course.
You are using other peoples cars and without those, there is nothing.
Cheers,
Hermann
Quoted 10 lines
Quoted 10 lines
With past kernel and a patch as suggested here:
http://www.linuxtv.org/wiki/index.php/TerraTec
that link to:
http://www.linuxtv.org/wiki/index.php/TerraTec_Cinergy_Hybrid_T_USB_XS
that link to:
http://mcentral.de/wiki/index.php5/Main_Page
More bad now:
http://mcentral.de/wiki/index.php5/Installation_Guide
sell TV tuner, and do not support anymore the Terratec tuner, the source repository is disappeared, and install instruction is a commercial.
I do not know if is correct that linuxtv.org link to a web site with unsupported product/commercial. Please change the link in page:
http://www.linuxtv.org/wiki/index.php/TerraTec_Cinergy_Hybrid_T_USB_XS
Quoted 3 lines
Quoted 3 lines
and some troubles for Ubuntu kernel that I solved here:
https://bugs.launchpad.net/bugs/322732
worked well for a year or more.
the Ubuntu kernel bug is fixed in 9.04
Devin Heitmueller ha scritto:
Quoted 4 lines
That device, including full support for the IR, is now supported in the mainline v4l-dvb tree (and will appear in kernel 2.6.31). Just follow the directions here to get the code:
http://linuxtv.org/repo
yesterday evening I downloaded the sources with mercurial, compiled and installed. Same result, from dmesg the firmware file 'xc3028-v27.fw' is missing. When I put it in /lib/firmware Kaffeine video/audio work, but no IR.
ready to help in debugging,
Valerio
On Thu, Jul 30, 2009 at 2:42 AM, Valerio Messina<[email protected]> wrote:
yesterday evening I downloaded the sources with mercurial, compiled and
Quoted 6 lines
installed.
Same result, from dmesg the firmware file 'xc3028-v27.fw' is missing. When I put it in/lib/firmwareKaffeine video/audio work, but no IR.ready to help in debugging,
Valerio
You are correct that you will continue to see the message about 'xc3028-v27.fw' being missing until you install the firmware. We do not currently have the rights to redistribute it, which is why you have to install it manually.
How are you testing the IR support? And are you using the Terratec remote control that came with the product? Have you tried opening a text editor, hitting the "1" key, and seeing if the character appears?
Devin
Signature · 2 lines
Devin J. Heitmueller - Kernel Labs http://www.kernellabs.com
Devin Heitmueller ha scritto:
Quoted 1 line
How are you testing the IR support?
starting Kaffeine with a Digital TV channel, pressing numeric key of the remote in front of IR receiver connected to Terratec Cinergy Hybrid T XS.
Quoted 2 lines
And are you using the Terratec
remote control that came with the product?
yes, the one showed in this picture:
http://www.terratec.it/prodotti/schede_tv/TerraTec%20Cinergy%20Hybrid%20T%20USB%20XS/CinergyHybridTUSBXSscope.jpg
Quoted 2 lines
Have you tried opening a
text editor, hitting the "1" key, and seeing if the character appears?
I tried last evening, and no, does not appear any digit.
My lsusb ID is:
Bus 001 Device 007:
ID 0ccd:0042 TerraTec Electronic GmbH Cinergy Hybrid T XS
Note: with Ubuntu 8.04 K2.6.24-21-generic the TV and IR always worked. With Ubuntu 8.10 and kernel
2.6.27.7-generic, 2.6.27.9-generic, 2.6.27.11-generic, 2.6.27-14-generic I needed to add some media Kheaders, but then TV and IR always worked. The problem appear just after upgrade to Ubuntu 9.04 kernel 2.6.28-13-generic and happen the same for 2.6.28-14-generic
Valerio
Quoted 22 lines · Valerio Messina
Devin Heitmueller ha scritto:
Quoted 2 lines
How are you testing the IR support?
starting Kaffeine with a Digital TV channel, pressing numeric key of the remote in front of IR receiver connected to Terratec Cinergy Hybrid T XS.
Quoted 2 lines
And are you using the Terratec
remote control that came with the product?yes, the one showed in this picture:
http://www.terratec.it/prodotti/schede_tv/TerraTec%20Cinergy%20Hybrid%20T%20USB%20XS/CinergyHybridTUSBXSscope.jpgQuoted 2 lines
Have you tried opening a
text editor, hitting the "1" key, and seeing if the character appears?I tried last evening, and no, does not appear any digit.
My lsusb ID is:
Bus 001 Device 007:
ID 0ccd:0042 TerraTec Electronic GmbH Cinergy Hybrid T XS
Quoted 8 lines
Note: with Ubuntu 8.04 K2.6.24-21-generic the TV and IR always worked. With Ubuntu 8.10 and kernel
2.6.27.7-generic, 2.6.27.9-generic, 2.6.27.11-generic, 2.6.27-14-generic I needed to add some media Kheaders, but then TV and IR always worked. The problem appear just after upgrade to Ubuntu 9.04 kernel 2.6.28-13-generic and happen the same for 2.6.28-14-genericValerio
I'm quite confident that it wasn't working in 8.04/8.10 with the stock kernel, given I spent every night for several weeks getting support for both variants of the device to work using hardware sent to me by a user. And I had to create an IR profile for the remote control from scratch.
That said, the root of the problem seems to be that the IR support I wrote didn't find its way upstream. I can only assume that I lost the patch when I was redoing my hg tree for submission.
I will look around and see if I can find a backup of the old tree.
Devin
Signature · 2 lines
Devin J. Heitmueller - Kernel Labs http://www.kernellabs.com
Quoted 29 lines · Valerio Messina
Devin Heitmueller ha scritto:
Quoted 2 lines
How are you testing the IR support?
starting Kaffeine with a Digital TV channel, pressing numeric key of the remote in front of IR receiver connected to Terratec Cinergy Hybrid T XS.
Quoted 2 lines
And are you using the Terratec
remote control that came with the product?yes, the one showed in this picture:
http://www.terratec.it/prodotti/schede_tv/TerraTec%20Cinergy%20Hybrid%20T%20USB%20XS/CinergyHybridTUSBXSscope.jpgQuoted 2 lines
Have you tried opening a
text editor, hitting the "1" key, and seeing if the character appears?I tried last evening, and no, does not appear any digit.
My lsusb ID is:
Bus 001 Device 007:
ID 0ccd:0042 TerraTec Electronic GmbH Cinergy Hybrid T XSNote: with Ubuntu 8.04 K2.6.24-21-generic the TV and IR always worked. With Ubuntu 8.10 and kernel
2.6.27.7-generic, 2.6.27.9-generic, 2.6.27.11-generic, 2.6.27-14-generic I needed to add some media Kheaders, but then TV and IR always worked. The problem appear just after upgrade to Ubuntu 9.04 kernel 2.6.28-13-generic and happen the same for 2.6.28-14-generic
Quoted 7 lines
Valerio
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Ah, good news: the patch I wrote that adds support for the remote control is still around:
http://linuxtv.org/hg/~dheitmueller/v4l-dvb-terratec-xs/rev/92885f66ac68
I will prep this into a new tree and issue a pull request when I get back in town on Sunday.
Devin
Signature · 2 lines
Devin J. Heitmueller - Kernel Labs http://www.kernellabs.com
Devin Heitmueller ha scritto:
Quoted 7 lines
Ah, good news: the patch I wrote that adds support for the remote control is still around:
http://linuxtv.org/hg/~dheitmueller/v4l-dvb-terratec-xs/rev/92885f66ac68
I will prep this into a new tree and issue a pull request when I get back in town on Sunday.
hi,
I tried to apply the patch, recompile, install and reboot. Same results, IR does not send digit to text editor or Kaffeine.
What other can I do for further help/testing?
Valerio
Valerio Messina ha scritto:
Quoted 6 lines
Devin Heitmueller ha scritto:
Quoted 5 lines
Ah, good news: the patch I wrote that adds support for the remote control is still around:
http://linuxtv.org/hg/~dheitmueller/v4l-dvb-terratec-xs/rev/92885f66ac68
Quoted 8 lines
Quoted 2 lines
I will prep this into a new tree and issue a pull request when I get back in town on Sunday.
hi,
I tried to apply the patch, recompile, install and reboot. Same results, IR does not send digit to text editor or Kaffeine.What other can I do for further help/testing?
I tried another thing.
I unzipped a 2009-01-29 version of
http://mcentral.de/hg/~mrec/v4l-dvb-kernel
the last I used on Ubuntu 8.10, not really updated but worked,
recompiled for the new Ubuntu kernel
2.6.28-14-generic
install and reboot.
This one work, IR send digit to text editor and Kaffeine.
Now I remember, with past Ubuntu version I used mcentral modules, and not linuxtv ones. This is why IR worked for me.
I uploaded this shot of the disappeared mercurial repositories here:
http://sharebee.com/fed68f5f
all in all is all GPL code.
I looked at the code, and see that 'v4l-dvb-kernel' consist of less files, in particular are 296 files, while 'v4l-dvb' are 7916, probably because there are only em28xx related files. The source tree have some different organization.
I see that:v4l-dvb/linux/include/media/ir-common.h
andv4l-dvb/linux/drivers/media/common/ir-keymaps.c
does not exist
v4l-dvb/linux/drivers/media/video/em28xx/em28xx-cards.c is located here:v4l-dvb-kernel/em28xx-cards.c
and diff report lot lot of differencies.
hope this helps integrating IR support,
Valerio
Quoted 48 lines · Valerio Messina
Valerio Messina ha scritto:
Quoted 8 lines
Devin Heitmueller ha scritto:
Quoted 6 lines
Ah, good news: the patch I wrote that adds support for the remote control is still around:
http://linuxtv.org/hg/~dheitmueller/v4l-dvb-terratec-xs/rev/92885f66ac68
Quoted 8 lines
Quoted 2 lines
I will prep this into a new tree and issue a pull request when I get back in town on Sunday.
hi,
I tried to apply the patch, recompile, install and reboot. Same results, IR does not send digit to text editor or Kaffeine.What other can I do for further help/testing?
I tried another thing.
I unzipped a 2009-01-29 version of
http://mcentral.de/hg/~mrec/v4l-dvb-kernel
the last I used on Ubuntu 8.10, not really updated but worked, recompiled for the new Ubuntu kernel
2.6.28-14-generic
install and reboot.
This one work, IR send digit to text editor and Kaffeine.
Now I remember, with past Ubuntu version I used mcentral modules, and not linuxtv ones. This is why IR worked for me.I uploaded this shot of the disappeared mercurial repositories here:
http://sharebee.com/fed68f5f
all in all is all GPL code.I looked at the code, and see that 'v4l-dvb-kernel' consist of less files, in particular are 296 files, while 'v4l-dvb' are 7916, probably because there are only em28xx related files.
The source tree have some different organization.
I see that:v4l-dvb/linux/include/media/ir-common.h
andv4l-dvb/linux/drivers/media/common/ir-keymaps.c
does not exist
v4l-dvb/linux/drivers/media/video/em28xx/em28xx-cards.cis located here:v4l-dvb-kernel/em28xx-cards.c
and diff report lot lot of differencies.
Quoted 8 lines
hope this helps integrating IR support,
Valerio--
To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Valerio,
I'll get my patched merged (and make sure I didn't miss something). There is no need for the mcentral.de tree.
I had the whole thing working so perhaps the code that enabled the IR support was in a separate patch.
Devin
Signature · 2 lines
Devin J. Heitmueller - Kernel Labs http://www.kernellabs.com
Quoted 14 lines · Valerio Messina
Devin Heitmueller ha scritto:
Quoted 8 lines
Ah, good news: the patch I wrote that adds support for the remote control is still around:
http://linuxtv.org/hg/~dheitmueller/v4l-dvb-terratec-xs/rev/92885f66ac68
I will prep this into a new tree and issue a pull request when I get back in town on Sunday.
hi,
I tried to apply the patch, recompile, install and reboot. Same results, IR does not send digit to text editor or Kaffeine.
Quoted 8 lines
What other can I do for further help/testing?
Valerio
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Hello Valerio,
Please try the following:
hg clone http://kernellabs.com/hg/~dheitmueller/ttxs-remote
cd ttxs-remote
make
make install
reboot
Then see if the remote control works. If not, I will give you some commands to turn on the logging. This should work though since I had tested it myself when I had the device in question a couple of weeks ago.
Devin
Signature · 2 lines
Devin J. Heitmueller - Kernel Labs http://www.kernellabs.com
Devin Heitmueller ha scritto:
Quoted 11 lines
Please try the following:
hg clone http://kernellabs.com/hg/~dheitmueller/ttxs-remote
cd ttxs-remote
make
make install
rebootThen see if the remote control works. If not, I will give you some commands to turn on the logging. This should work though since I had tested it myself when I had the device in question a couple of weeks ago.
with this repository compiled, installed and after reboot, Kaffeine does not see at all the TV tuner. Logging instructions are always welcomed.
Valerio
dmesg report this log when I connect the USB tuner:
Aug 5 08:46:31 01ath3200 kernel: [ 365.276042] usb 1-3: new high speed USB device using ehci_hcd and address 4 Aug 5 08:46:31 01ath3200 kernel: [ 365.458835] usb 1-3: configuration #1 chosen from 1 choice Aug 5 08:46:31 01ath3200 kernel: [ 365.474488] Linux video capture interface: v2.00 Aug 5 08:46:31 01ath3200 kernel: [ 365.523111] em28xx: disagrees about version of symbol v4l_compat_translate_ioctl Aug 5 08:46:31 01ath3200 kernel: [ 365.523122] em28xx: Unknown symbol v4l_compat_translate_ioctl Aug 5 08:46:31 01ath3200 kernel: [ 365.525987] em28xx: disagrees about version of symbol video_unregister_device Aug 5 08:46:31 01ath3200 kernel: [ 365.525992] em28xx: Unknown symbol video_unregister_device Aug 5 08:46:31 01ath3200 kernel: [ 365.526369] em28xx: disagrees about version of symbol video_device_alloc Aug 5 08:46:31 01ath3200 kernel: [ 365.526374] em28xx: Unknown symbol video_device_alloc Aug 5 08:46:31 01ath3200 kernel: [ 365.526559] em28xx: disagrees about version of symbol video_register_device Aug 5 08:46:31 01ath3200 kernel: [ 365.526564] em28xx: Unknown symbol video_register_device Aug 5 08:46:31 01ath3200 kernel: [ 365.527584] em28xx: disagrees about version of symbol video_usercopy Aug 5 08:46:31 01ath3200 kernel: [ 365.527589] em28xx: Unknown symbol video_usercopy Aug 5 08:46:31 01ath3200 kernel: [ 365.527774] em28xx: disagrees about version of symbol video_device_release Aug 5 08:46:31 01ath3200 kernel: [ 365.527779] em28xx: Unknown symbol video_device_release Aug 5 08:46:32 01ath3200 pulseaudio[4176]: alsa-util.c: Cannot find fallback mixer control "Mic" or mixer control is no combination of switch/volume.
Quoted 50 lines · Valerio Messina
Devin Heitmueller ha scritto:
Quoted 8 lines
Please try the following:
hg clone http://kernellabs.com/hg/~dheitmueller/ttxs-remote
cd ttxs-remote
make
make install
rebootQuoted 4 lines
Then see if the remote control works. If not, I will give you some commands to turn on the logging. This should work though since I had tested it myself when I had the device in question a couple of weeks ago.
with this repository compiled, installed and after reboot, Kaffeine does not see at all the TV tuner.
Logging instructions are always welcomed.
Valeriodmesg report this log when I connect the USB tuner:
Aug 5 08:46:31 01ath3200 kernel: [ 365.276042] usb 1-3: new high speed USB device using
ehci_hcdand address 4
Aug 5 08:46:31 01ath3200 kernel: [ 365.458835] usb 1-3: configuration #1 chosen from 1 choice
Aug 5 08:46:31 01ath3200 kernel: [ 365.474488] Linux video capture
interface: v2.00
Aug 5 08:46:31 01ath3200 kernel: [ 365.523111] em28xx: disagrees about version of symbolv4l_compat_translate_ioctl
Aug 5 08:46:31 01ath3200 kernel: [ 365.523122] em28xx: Unknown symbolv4l_compat_translate_ioctl
Aug 5 08:46:31 01ath3200 kernel: [ 365.525987] em28xx: disagrees about version of symbolvideo_unregister_device
Aug 5 08:46:31 01ath3200 kernel: [ 365.525992] em28xx: Unknown symbolvideo_unregister_device
Aug 5 08:46:31 01ath3200 kernel: [ 365.526369] em28xx: disagrees about version of symbolvideo_device_alloc
Aug 5 08:46:31 01ath3200 kernel: [ 365.526374] em28xx: Unknown symbolvideo_device_alloc
Aug 5 08:46:31 01ath3200 kernel: [ 365.526559] em28xx: disagrees about version of symbolvideo_register_device
Aug 5 08:46:31 01ath3200 kernel: [ 365.526564] em28xx: Unknown symbolvideo_register_device
Aug 5 08:46:31 01ath3200 kernel: [ 365.527584] em28xx: disagrees about version of symbolvideo_usercopy
Aug 5 08:46:31 01ath3200 kernel: [ 365.527589] em28xx: Unknown symbolvideo_usercopy
Aug 5 08:46:31 01ath3200 kernel: [ 365.527774] em28xx: disagrees about version of symbolvideo_device_release
Aug 5 08:46:31 01ath3200 kernel: [ 365.527779] em28xx: Unknown symbol
Quoted 9 lines
video_device_release
Aug 5 08:46:32 01ath3200 pulseaudio[4176]:alsa-util.c: Cannot find fallback mixer control "Mic" or mixer control is no combination of switch/volume.
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Seems like your compile environment got messed up somehow. Which distro is this, and have you updated the kernel since checking out the code? It's also possible if you were playing around with the mcentral repository that both versions of em28xx are still installed.
Devin
Signature · 2 lines
Devin J. Heitmueller - Kernel Labs http://www.kernellabs.com
Em Wed, 5 Aug 2009 09:27:13 -0400
Devin Heitmueller <[email protected]> escreveu:
Quoted 61 lines · Valerio Messina
Quoted 50 lines
Devin Heitmueller ha scritto:
Quoted 8 lines
Please try the following:
hg clone http://kernellabs.com/hg/~dheitmueller/ttxs-remote
cd ttxs-remote
make
make install
rebootQuoted 4 lines
Then see if the remote control works. If not, I will give you some commands to turn on the logging. This should work though since I had tested it myself when I had the device in question a couple of weeks ago.
with this repository compiled, installed and after reboot, Kaffeine does not see at all the TV tuner.
Logging instructions are always welcomed.
Valeriodmesg report this log when I connect the USB tuner:
Aug 5 08:46:31 01ath3200 kernel: [ 365.276042] usb 1-3: new high speed USB device using
ehci_hcdand address 4
Aug 5 08:46:31 01ath3200 kernel: [ 365.458835] usb 1-3: configuration #1 chosen from 1 choice
Aug 5 08:46:31 01ath3200 kernel: [ 365.474488] Linux video capture
interface: v2.00
Aug 5 08:46:31 01ath3200 kernel: [ 365.523111] em28xx: disagrees about version of symbolv4l_compat_translate_ioctl
Aug 5 08:46:31 01ath3200 kernel: [ 365.523122] em28xx: Unknown symbolv4l_compat_translate_ioctl
Aug 5 08:46:31 01ath3200 kernel: [ 365.525987] em28xx: disagrees about version of symbolvideo_unregister_device
Aug 5 08:46:31 01ath3200 kernel: [ 365.525992] em28xx: Unknown symbolvideo_unregister_device
Aug 5 08:46:31 01ath3200 kernel: [ 365.526369] em28xx: disagrees about version of symbolvideo_device_alloc
Aug 5 08:46:31 01ath3200 kernel: [ 365.526374] em28xx: Unknown symbolvideo_device_alloc
Aug 5 08:46:31 01ath3200 kernel: [ 365.526559] em28xx: disagrees about version of symbolvideo_register_device
Aug 5 08:46:31 01ath3200 kernel: [ 365.526564] em28xx: Unknown symbolvideo_register_device
Aug 5 08:46:31 01ath3200 kernel: [ 365.527584] em28xx: disagrees about version of symbolvideo_usercopy
Aug 5 08:46:31 01ath3200 kernel: [ 365.527589] em28xx: Unknown symbolvideo_usercopy
Aug 5 08:46:31 01ath3200 kernel: [ 365.527774] em28xx: disagrees about version of symbolvideo_device_release
Aug 5 08:46:31 01ath3200 kernel: [ 365.527779] em28xx: Unknown symbolQuoted 9 lines
video_device_release
Aug 5 08:46:32 01ath3200 pulseaudio[4176]:alsa-util.c: Cannot find fallback mixer control "Mic" or mixer control is no combination of switch/volume.
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Quoted 4 lines
Seems like your compile environment got messed up somehow. Which distro is this, and have you updated the kernel since checking out the code? It's also possible if you were playing around with the mcentral repository that both versions of em28xx are still installed.
Try a make rminstall. This is required with Ubuntu, since it installs drivers/media at the wrong dir
Cheers,
Mauro
Quoted 1 line · Devin Heitmueller
Which distro is this
Ubuntu 9.04
kernel 2.6.28-14-generic
Quoted 1 line
and have you updated the kernel since checking out the code?
no
Quoted 2 lines
It's also possible if you were playing around with the mcentral repository that both versions of em28xx are still installed.
Quoted 2 lines · Mauro Carvalho Chehab
Try a make rminstall. This is required with Ubuntu, since it installs
drivers/mediaat the wrong dir
I disconnected the TV tuner, then
$ sudo make unload $ sudo make rminstall in the three following subdirectories: v4l-dvb v4l-dvb-kernel (mcentral hg copy) ttxs-remote
Then follow instructions from Devin:
hg clone http://kernellabs.com/hg/~dheitmueller/ttxs-remote
cd ttxs-remote
make
sudo make install
reboot
No error on compile and install time.
But same results, Kaffeine do not see the TVtuner, and dmesg report this on USB connect:
Aug 5 20:12:16 01ath3200 kernel: [ 182.312039] usb 1-3: new high speed USB device using ehci_hcd and address 3 Aug 5 20:12:16 01ath3200 kernel: [ 182.497009] usb 1-3: configuration #1 chosen from 1 choice Aug 5 20:12:16 01ath3200 kernel: [ 182.622103] usbcore: registered new interface driver snd-usb-audio Aug 5 20:12:17 01ath3200 kernel: [ 182.810124] Linux video capture interface: v2.00 Aug 5 20:12:17 01ath3200 kernel: [ 182.831714] em28xx: disagrees about version of symbol v4l_compat_translate_ioctl Aug 5 20:12:17 01ath3200 kernel: [ 182.831725] em28xx: Unknown symbol v4l_compat_translate_ioctl Aug 5 20:12:17 01ath3200 kernel: [ 182.835363] em28xx: disagrees about version of symbol video_unregister_device Aug 5 20:12:17 01ath3200 kernel: [ 182.835370] em28xx: Unknown symbol video_unregister_device Aug 5 20:12:17 01ath3200 kernel: [ 182.835754] em28xx: disagrees about version of symbol video_device_alloc Aug 5 20:12:17 01ath3200 kernel: [ 182.835759] em28xx: Unknown symbol video_device_alloc Aug 5 20:12:17 01ath3200 kernel: [ 182.835944] em28xx: disagrees about version of symbol video_register_device Aug 5 20:12:17 01ath3200 kernel: [ 182.835949] em28xx: Unknown symbol video_register_device Aug 5 20:12:17 01ath3200 kernel: [ 182.836988] em28xx: disagrees about version of symbol video_usercopy Aug 5 20:12:17 01ath3200 kernel: [ 182.836993] em28xx: Unknown symbol video_usercopy Aug 5 20:12:17 01ath3200 kernel: [ 182.837178] em28xx: disagrees about version of symbol video_device_release Aug 5 20:12:17 01ath3200 kernel: [ 182.837183] em28xx: Unknown symbol video_device_release ... (repeated 3 times) Aug 5 20:12:18 01ath3200 pulseaudio[4364]: alsa-util.c: Cannot find fallback mixer control "Mic" or mixer control is no combination of switch/volume.
Quoted 75 lines · Valerio Messina
Quoted 2 lines · Devin Heitmueller
Which distro is this
Ubuntu 9.04
kernel 2.6.28-14-genericQuoted 1 line
and have you updated the kernel since checking out the code?
no
Quoted 2 lines
It's also possible if you were playing around with the mcentral repository that both versions of em28xx are still installed.
Quoted 3 lines · Mauro Carvalho Chehab
Try a make rminstall. This is required with Ubuntu, since it installs
drivers/mediaat the wrong dirI disconnected the TV tuner, then
$ sudo make unload $ sudo make rminstall in the three following subdirectories: v4l-dvb v4l-dvb-kernel (mcentral hg copy) ttxs-remoteThen follow instructions from Devin:
hg clone http://kernellabs.com/hg/~dheitmueller/ttxs-remote
cd ttxs-remote
make
sudo make install
rebootNo error on compile and install time.
But same results, Kaffeine do not see the TVtuner, and dmesg report this on USB connect:Aug 5 20:12:16 01ath3200 kernel: [ 182.312039] usb 1-3: new high speed USB device using
ehci_hcdand address 3
Aug 5 20:12:16 01ath3200 kernel: [ 182.497009] usb 1-3: configuration #1 chosen from 1 choice
Aug 5 20:12:16 01ath3200 kernel: [ 182.622103] usbcore: registered new interface driver snd-usb-audio
Aug 5 20:12:17 01ath3200 kernel: [ 182.810124] Linux video capture
interface: v2.00
Aug 5 20:12:17 01ath3200 kernel: [ 182.831714] em28xx: disagrees about version of symbolv4l_compat_translate_ioctl
Aug 5 20:12:17 01ath3200 kernel: [ 182.831725] em28xx: Unknown symbolv4l_compat_translate_ioctl
Aug 5 20:12:17 01ath3200 kernel: [ 182.835363] em28xx: disagrees about version of symbolvideo_unregister_device
Aug 5 20:12:17 01ath3200 kernel: [ 182.835370] em28xx: Unknown symbolvideo_unregister_device
Aug 5 20:12:17 01ath3200 kernel: [ 182.835754] em28xx: disagrees about version of symbolvideo_device_alloc
Aug 5 20:12:17 01ath3200 kernel: [ 182.835759] em28xx: Unknown symbolvideo_device_alloc
Aug 5 20:12:17 01ath3200 kernel: [ 182.835944] em28xx: disagrees about version of symbolvideo_register_device
Aug 5 20:12:17 01ath3200 kernel: [ 182.835949] em28xx: Unknown symbolvideo_register_device
Aug 5 20:12:17 01ath3200 kernel: [ 182.836988] em28xx: disagrees about version of symbolvideo_usercopy
Aug 5 20:12:17 01ath3200 kernel: [ 182.836993] em28xx: Unknown symbolvideo_usercopy
Aug 5 20:12:17 01ath3200 kernel: [ 182.837178] em28xx: disagrees about version of symbolvideo_device_release
Aug 5 20:12:17 01ath3200 kernel: [ 182.837183] em28xx: Unknown symbolvideo_device_release
... (repeated 3 times)
Aug 5 20:12:18 01ath3200 pulseaudio[4364]:alsa-util.c: Cannot find fallback mixer control "Mic" or mixer control is no combination of switch/volume.
Quoted 5 lines
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Try running this:
find /lib/modules/ -name "em28*"
Then pastebin the output and send us a link. Also send us the output of:
uname -a
Thanks,
Devin
Signature · 2 lines
Devin J. Heitmueller - Kernel Labs http://www.kernellabs.com
Devin Heitmueller ha scritto:
Quoted 5 lines
Try running this:
find
/lib/modules/-name "em28*"Then pastebin the output and send us a link.
efa@01ath3200:~$ find /lib/modules/ -name "em28*" /lib/modules/2.6.24-21-generic/empia/em28xx-audioep.ko /lib/modules/2.6.24-21-generic/empia/em28xx-dvb.ko /lib/modules/2.6.24-21-generic/empia/em28xx-cx25843.ko /lib/modules/2.6.24-21-generic/empia/em28xx.ko /lib/modules/2.6.24-21-generic/empia/em28xx-audio.ko /lib/modules/2.6.24-21-generic/empia/em28xx-aad.ko /lib/modules/2.6.27-14-generic/empia/em28xx-audioep.ko /lib/modules/2.6.27-14-generic/empia/em28xx-dvb.ko /lib/modules/2.6.27-14-generic/empia/em28xx-cx25843.ko /lib/modules/2.6.27-14-generic/empia/em28xx.ko /lib/modules/2.6.27-14-generic/empia/em28xx-audio.ko /lib/modules/2.6.27-14-generic/empia/em28xx-aad.ko /lib/modules/2.6.27-14-generic/kernel/drivers/media/video/em28xx /lib/modules/2.6.27-14-generic/kernel/drivers/media/video/em28xx/em28xx-dvb.ko /lib/modules/2.6.27-14-generic/kernel/drivers/media/video/em28xx/em28xx-alsa.ko /lib/modules/2.6.27-14-generic/kernel/drivers/media/video/em28xx/em28xx.ko /lib/modules/2.6.28-14-generic/empia/em28xx-audioep.ko /lib/modules/2.6.28-14-generic/empia/em28xx-dvb.ko /lib/modules/2.6.28-14-generic/empia/em28xx-cx25843.ko /lib/modules/2.6.28-14-generic/empia/em28xx.ko /lib/modules/2.6.28-14-generic/empia/em28xx-audio.ko /lib/modules/2.6.28-14-generic/empia/em28xx-aad.ko /lib/modules/2.6.28-14-generic/kernel/drivers/media/video/em28xx /lib/modules/2.6.28-14-generic/kernel/drivers/media/video/em28xx/em28xx-dvb.ko /lib/modules/2.6.28-14-generic/kernel/drivers/media/video/em28xx/em28xx-alsa.ko /lib/modules/2.6.28-14-generic/kernel/drivers/media/video/em28xx/em28xx.ko /lib/modules/2.6.28-13-generic/kernel/drivers/media/video/em28xx /lib/modules/2.6.27-9-generic/empia/em28xx-audioep.ko /lib/modules/2.6.27-9-generic/empia/em28xx-dvb.ko /lib/modules/2.6.27-9-generic/empia/em28xx-cx25843.ko /lib/modules/2.6.27-9-generic/empia/em28xx.ko /lib/modules/2.6.27-9-generic/empia/em28xx-audio.ko /lib/modules/2.6.27-9-generic/empia/em28xx-aad.ko /lib/modules/2.6.27-11-generic/empia/em28xx-audioep.ko /lib/modules/2.6.27-11-generic/empia/em28xx-dvb.ko /lib/modules/2.6.27-11-generic/empia/em28xx-cx25843.ko /lib/modules/2.6.27-11-generic/empia/em28xx.ko /lib/modules/2.6.27-11-generic/empia/em28xx-audio.ko /lib/modules/2.6.27-11-generic/empia/em28xx-aad.ko
there's all the history of modules I compiled for past kernels, and that I keep installed
Quoted 3 lines
Also send us the output of:
uname -a
efa@01ath3200:~$ uname -a Linux 01ath3200 2.6.28-14-generic #47-Ubuntu SMP Sat Jul 25 00:28:35 UTC 2009 i686 GNU/Linux
the last stable from Ubuntu 9.04
Valerio
Quoted 5 lines · Valerio Messina
Devin Heitmueller ha scritto:
Quoted 4 lines
Try running this:
find
/lib/modules/-name "em28*"
<snip>
Yeah, that confirms it. The files in /lib/modules/2.6.28-14-generic/ are conflicting with the reset of the v4l-dvb codebase. Basically, the mcentral.de em28xx driver is attempting to load but conflicts with the videobuf implementation provided by v4l-dvb.
I don't know what the process is for uninstalling the mcentral.de em28xx driver. Probably involves removing that directory and re-running depmod or something.
Devin
Signature · 2 lines
Devin J. Heitmueller - Kernel Labs http://www.kernellabs.com
Devin Heitmueller ha scritto:
Quoted 3 lines
I don't know what the process is for uninstalling the mcentral.de em28xx driver. Probably involves removing that directory and re-running depmod or something.
ok, I run:
$ sudo mv /lib/modules/2.6.28-14-generic/empia/ ~/temp $ sudo depmod -a
then connected the TVtuner, Kaffeine identify the TV tuner and the video/audio is OK. And now IR send digit to text editor and Kaffeine.
thanks
Valerio
dmesg show:
Aug 5 21:59:50 01ath3200 kernel: [ 6635.764021] usb 1-3: new high speed USB device using ehci_hcd and address 4 Aug 5 21:59:50 01ath3200 kernel: [ 6635.906865] usb 1-3: configuration #1 chosen from 1 choice Aug 5 21:59:50 01ath3200 kernel: [ 6636.195926] em28xx: New device TerraTec Electronic GmbH Cinergy Hybrid T USB XS @ 480 Mbps (0ccd:0042, interface 0, class 0) Aug 5 21:59:50 01ath3200 kernel: [ 6636.195934] em28xx #0: Identified as Terratec Hybrid XS (card=11) Aug 5 21:59:50 01ath3200 kernel: [ 6636.204453] em28xx #0: chip ID is em2882/em2883 Aug 5 21:59:50 01ath3200 kernel: [ 6636.364894] em28xx #0: i2c eeprom 00: 1a eb 67 95 cd 0c 42 00 50 12 5c 03 6a 32 9c 34 Aug 5 21:59:50 01ath3200 kernel: [ 6636.364903] em28xx #0: i2c eeprom 10: 00 00 06 57 46 07 00 00 00 00 00 00 00 00 00 00 Aug 5 21:59:50 01ath3200 kernel: [ 6636.364910] em28xx #0: i2c eeprom 20: 46 00 01 00 f0 10 31 00 b8 00 14 00 5b 00 00 00 Aug 5 21:59:50 01ath3200 kernel: [ 6636.364917] em28xx #0: i2c eeprom 30: 00 00 20 40 20 6e 02 20 10 01 00 00 00 00 00 00 Aug 5 21:59:50 01ath3200 kernel: [ 6636.364923] em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Aug 5 21:59:50 01ath3200 kernel: [ 6636.364929] em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Aug 5 21:59:50 01ath3200 kernel: [ 6636.364936] em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 32 03 43 00 69 00 Aug 5 21:59:50 01ath3200 kernel: [ 6636.364942] em28xx #0: i2c eeprom 70: 6e 00 65 00 72 00 67 00 79 00 20 00 48 00 79 00 Aug 5 21:59:50 01ath3200 kernel: [ 6636.364948] em28xx #0: i2c eeprom 80: 62 00 72 00 69 00 64 00 20 00 54 00 20 00 55 00 Aug 5 21:59:50 01ath3200 kernel: [ 6636.364955] em28xx #0: i2c eeprom 90: 53 00 42 00 20 00 58 00 53 00 00 00 34 03 54 00 Aug 5 21:59:50 01ath3200 kernel: [ 6636.364961] em28xx #0: i2c eeprom a0: 65 00 72 00 72 00 61 00 54 00 65 00 63 00 20 00 Aug 5 21:59:50 01ath3200 kernel: [ 6636.364968] em28xx #0: i2c eeprom b0: 45 00 6c 00 65 00 63 00 74 00 72 00 6f 00 6e 00 Aug 5 21:59:50 01ath3200 kernel: [ 6636.364974] em28xx #0: i2c eeprom c0: 69 00 63 00 20 00 47 00 6d 00 62 00 48 00 00 00 Aug 5 21:59:50 01ath3200 kernel: [ 6636.364980] em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Aug 5 21:59:50 01ath3200 kernel: [ 6636.364987] em28xx #0: i2c eeprom e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Aug 5 21:59:50 01ath3200 kernel: [ 6636.364993] em28xx #0: i2c eeprom f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Aug 5 21:59:50 01ath3200 kernel: [ 6636.365001] em28xx #0: EEPROM ID= 0x9567eb1a, EEPROM hash = 0x41d0bf96 Aug 5 21:59:50 01ath3200 kernel: [ 6636.365002] em28xx #0: EEPROM info: Aug 5 21:59:50 01ath3200 kernel: [ 6636.365004] em28xx #0:^IAC97 audio (5 sample rates) Aug 5 21:59:50 01ath3200 kernel: [ 6636.365006] em28xx #0:^I500mA max power Aug 5 21:59:50 01ath3200 kernel: [ 6636.365008] em28xx #0:^ITable at 0x06, strings=0x326a, 0x349c, 0x0000 Aug 5 21:59:50 01ath3200 kernel: [ 6636.382818] tvp5150 1-005c: chip found @ 0xb8 (em28xx #0) Aug 5 21:59:50 01ath3200 kernel: [ 6636.398433] tuner 1-0061: chip found @ 0xc2 (em28xx #0) Aug 5 21:59:50 01ath3200 kernel: [ 6636.408529] xc2028 1-0061: creating new instance Aug 5 21:59:50 01ath3200 kernel: [ 6636.408533] xc2028 1-0061: type set to XCeive xc2028/xc3028 tuner Aug 5 21:59:50 01ath3200 kernel: [ 6636.408543] usb 1-3: firmware: requesting xc3028-v27.fw Aug 5 21:59:50 01ath3200 kernel: [ 6636.484304] xc2028 1-0061: Loading 80 firmware images from xc3028-v27.fw, type: xc2028 firmware, ver 2.7 Aug 5 21:59:50 01ath3200 kernel: [ 6636.532022] xc2028 1-0061: Loading firmware for type=BASE (1), id 0000000000000000. Aug 5 21:59:51 01ath3200 kernel: [ 6637.614070] xc2028 1-0061: Loading firmware for type=(0), id 000000000000b700. Aug 5 21:59:51 01ath3200 kernel: [ 6637.630491] SCODE (20000000), id 000000000000b700: Aug 5 21:59:51 01ath3200 kernel: [ 6637.630496] xc2028 1-0061: Loading SCODE for type=MONO SCODE HAS_IF_4320 (60008000), id 0000000000008000. Aug 5 21:59:52 01ath3200 kernel: [ 6637.812497] input: em28xx IR (em28xx #0) as /devices/pci0000:00/0000:00:03.3/usb1/1-3/input/input10 Aug 5 21:59:52 01ath3200 pulseaudio[4364]: alsa-util.c: Cannot find fallback mixer control "Mic" or mixer control is no combination of switch/volume. Aug 5 21:59:52 01ath3200 kernel: [ 6637.836243] em28xx #0: Config register raw data: 0x50 Aug 5 21:59:52 01ath3200 kernel: [ 6637.836986] em28xx #0: AC97 vendor ID = 0xffffffff Aug 5 21:59:52 01ath3200 kernel: [ 6637.837368] em28xx #0: AC97 features = 0x6a90 Aug 5 21:59:52 01ath3200 kernel: [ 6637.837370] em28xx #0: Empia 202 AC97 audio processor detected Aug 5 21:59:52 01ath3200 kernel: [ 6637.948487] tvp5150 1-005c: tvp5150am1 detected. Aug 5 21:59:52 01ath3200 kernel: [ 6638.044877] em28xx #0: v4l2 driver version 0.1.2 Aug 5 21:59:52 01ath3200 kernel: [ 6638.115102] em28xx #0: V4L2 device registered as /dev/video0 and /dev/vbi0 Aug 5 21:59:52 01ath3200 kernel: [ 6638.131502] usbcore: registered new interface driver em28xx Aug 5 21:59:52 01ath3200 kernel: [ 6638.131507] em28xx driver loaded Aug 5 21:59:52 01ath3200 kernel: [ 6638.280453] xc2028 1-0061: attaching existing instance Aug 5 21:59:52 01ath3200 kernel: [ 6638.280457] xc2028 1-0061: type set to XCeive xc2028/xc3028 tuner Aug 5 21:59:52 01ath3200 kernel: [ 6638.280460] em28xx #0/2: xc3028 attached Aug 5 21:59:52 01ath3200 kernel: [ 6638.280463] DVB: registering new adapter (em28xx #0) Aug 5 21:59:52 01ath3200 kernel: [ 6638.280467] DVB: registering adapter 0 frontend 0 (Zarlink ZL10353 DVB-T)... Aug 5 21:59:52 01ath3200 kernel: [ 6638.280878] Successfully loaded em28xx-dvb Aug 5 21:59:52 01ath3200 kernel: [ 6638.280881] Em28xx: Initialized (Em28xx dvb Extension) extension Aug 5 21:59:52 01ath3200 kernel: [ 6638.564739] tvp5150 1-005c: tvp5150am1 detected.
Aug 5 22:00:36 01ath3200 kernel: [ 6681.848015] xc2028 1-0061: Loading firmware for type=BASE F8MHZ (3), id 0000000000000000. Aug 5 22:00:37 01ath3200 kernel: [ 6682.781882] xc2028 1-0061: Loading firmware for type=D2633 DTV8 (210), id 0000000000000000. Aug 5 22:00:37 01ath3200 kernel: [ 6682.795251] xc2028 1-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
Quoted 10 lines · Valerio Messina
Devin Heitmueller ha scritto:
Quoted 4 lines
I don't know what the process is for uninstalling the mcentral.de em28xx driver. Probably involves removing that directory and re-running depmod or something.
ok, I run:
$ sudo mv /lib/modules/2.6.28-14-generic/empia/ ~/temp $ sudo depmod -a
Quoted 6 lines
then connected the TVtuner, Kaffeine identify the TV tuner and the video/audio is OK.
And now IR send digit to text editor and Kaffeine.thanks
Valerio
Great. I'll get a PULL request issued so this can get into the mainline. Thanks for testing.
Devin
Signature · 2 lines
Devin J. Heitmueller - Kernel Labs http://www.kernellabs.com
Devin Heitmueller ha scritto:
Quoted 2 lines
Great. I'll get a PULL request issued so this can get into the mainline. Thanks for testing.
I have three more request for this driver tuner, but are low priority.
1 - On/off button on the IR as now, send a command to the desktop to start the shutdown, reboot, suspend or hybernate window. To me should send something to the active window only, like an ALT+F4 to close the windows (for example Kaffeine).
2 - is there a simple (like a configuration text file) method to assign functions to unused buttons on the remote IR, like start an executable or send dbus messages?
3 - the TVtuner remain ON, also when user applications are all OFF. It become hot specially in summer. That tuner is not well designed in the thermal aspect, and when ON stay at 50°C, where blocky video and noisy audio happen. I made same holes on the two narrow side of the case and now is better. Is there a method to swith OFF, on put on standby the tuner (like on Windows) when it is unused?
thanks,
Valerio
Quoted 4 lines · Valerio Messina
1 - On/off button on the IR as now, send a command to the desktop to start the shutdown, reboot, suspend or hybernate window. To me should send something to the active window only, like an ALT+F4 to close the windows (for example Kaffeine).
This is typically controlled by your application or the desktop environment. The on/off is mapped the same across all remote controls.
Quoted 3 lines
2 - is there a simple (like a configuration text file) method to assign functions to unused buttons on the remote IR, like start an executable or send dbus messages?
The map that I committed in does have all the keys mapped to input event codes. You would need to reconfigure your input subsystem to point the event codes to some other function.
Quoted 6 lines
3 - the TVtuner remain ON, also when user applications are all OFF. It become hot specially in summer. That tuner is not well designed in the thermal aspect, and when ON stay at 50°C, where blocky video and noisy audio happen. I made same holes on the two narrow side of the case and now is better. Is there a method to swith OFF, on put on standby the tuner (like on Windows) when it is unused?
The power management on these devices could certainly use some work. I thought the power management was working on that board since it has an xc3028 tuner chip, but I would have to look at the code to be sure.
Devin
Signature · 2 lines
Devin J. Heitmueller - Kernel Labs http://www.kernellabs.com
Devin Heitmueller ha scritto:
Quoted 9 lines · Valerio Messina
Quoted 4 lines
1 - On/off button on the IR as now, send a command to the desktop to start the shutdown, reboot, suspend or hybernate window. To me should send something to the active window only, like an ALT+F4 to close the windows (for example Kaffeine).
This is typically controlled by your application or the desktop environment. The on/off is mapped the same across all remote controls.
and seems mapped the same on all applications
Quoted 3 lines
The map that I committed in does have all the keys mapped to input event codes. You would need to reconfigure your input subsystem to point the event codes to some other function.
the channel up/down, EPG, Teletext and circled "i" on the remote does nothing.
Valerio
Quoted 6 lines · Valerio Messina
Quoted 3 lines
The map that I committed in does have all the keys mapped to input event codes. You would need to reconfigure your input subsystem to point the event codes to some other function.
the channel up/down, EPG, Teletext and circled "i" on the remote does nothing.
They do "nothing", but that is the application's fault and not the driver's. When pressing the channel up key, the driver generates a keyboard event called KEY_CHANNELUP, and the application has to have that mapped to the correct shortcut. Likewise, channel down, epg, and the "i" generate KEY_CHANNELDOWN, KEY_EPG, and KEY_INFO.
Kaffeine 1.0pre1 appears to have some new infrastructure for assigning events to shortcuts (see the menu item "Settings->Configure Shortcuts"), however it doesn't appear to work correctly in all cases.
Not that this is surprising for a prerelease.
Devin
Signature · 2 lines
Devin J. Heitmueller - Kernel Labs http://www.kernellabs.com
Devin Heitmueller ha scritto:
Quoted 2 lines
Great. I'll get a PULL request issued so this can get into the mainline. Thanks for testing.
sorry, as today I have to unsubscribe this interesting but really heavy mail list before holiday because it will rapidly fill up the space on my mailbox.
I will glad to further contribute testing of Terratec Cinergy Hybrid T XS, with future kernels and Ubuntu distribution, but please contact me to my email: [email protected]
In the meantime I have directed people on local ubuntu forum
http://forum.ubuntu-it.org/
to linuxtv.org for support of that tuner.
thanks for the rapid tuner+IR solution!
thanks for now,
Valerio
Quoted 60 lines · Valerio Messina
Devin Heitmueller ha scritto:
Quoted 6 lines
Try running this:
find
/lib/modules/-name "em28*"Then pastebin the output and send us a link.
efa@01ath3200:~$ find /lib/modules/ -name "em28*" /lib/modules/2.6.24-21-generic/empia/em28xx-audioep.ko /lib/modules/2.6.24-21-generic/empia/em28xx-dvb.ko /lib/modules/2.6.24-21-generic/empia/em28xx-cx25843.ko /lib/modules/2.6.24-21-generic/empia/em28xx.ko /lib/modules/2.6.24-21-generic/empia/em28xx-audio.ko /lib/modules/2.6.24-21-generic/empia/em28xx-aad.ko /lib/modules/2.6.27-14-generic/empia/em28xx-audioep.ko /lib/modules/2.6.27-14-generic/empia/em28xx-dvb.ko /lib/modules/2.6.27-14-generic/empia/em28xx-cx25843.ko /lib/modules/2.6.27-14-generic/empia/em28xx.ko /lib/modules/2.6.27-14-generic/empia/em28xx-audio.ko /lib/modules/2.6.27-14-generic/empia/em28xx-aad.ko /lib/modules/2.6.27-14-generic/kernel/drivers/media/video/em28xx /lib/modules/2.6.27-14-generic/kernel/drivers/media/video/em28xx/em28xx-dvb.ko /lib/modules/2.6.27-14-generic/kernel/drivers/media/video/em28xx/em28xx-alsa.ko /lib/modules/2.6.27-14-generic/kernel/drivers/media/video/em28xx/em28xx.ko /lib/modules/2.6.28-14-generic/empia/em28xx-audioep.ko /lib/modules/2.6.28-14-generic/empia/em28xx-dvb.ko /lib/modules/2.6.28-14-generic/empia/em28xx-cx25843.ko /lib/modules/2.6.28-14-generic/empia/em28xx.ko /lib/modules/2.6.28-14-generic/empia/em28xx-audio.ko /lib/modules/2.6.28-14-generic/empia/em28xx-aad.ko /lib/modules/2.6.28-14-generic/kernel/drivers/media/video/em28xx /lib/modules/2.6.28-14-generic/kernel/drivers/media/video/em28xx/em28xx-dvb.ko /lib/modules/2.6.28-14-generic/kernel/drivers/media/video/em28xx/em28xx-alsa.ko /lib/modules/2.6.28-14-generic/kernel/drivers/media/video/em28xx/em28xx.ko /lib/modules/2.6.28-13-generic/kernel/drivers/media/video/em28xx /lib/modules/2.6.27-9-generic/empia/em28xx-audioep.ko /lib/modules/2.6.27-9-generic/empia/em28xx-dvb.ko /lib/modules/2.6.27-9-generic/empia/em28xx-cx25843.ko /lib/modules/2.6.27-9-generic/empia/em28xx.ko /lib/modules/2.6.27-9-generic/empia/em28xx-audio.ko /lib/modules/2.6.27-9-generic/empia/em28xx-aad.ko /lib/modules/2.6.27-11-generic/empia/em28xx-audioep.ko /lib/modules/2.6.27-11-generic/empia/em28xx-dvb.ko /lib/modules/2.6.27-11-generic/empia/em28xx-cx25843.ko /lib/modules/2.6.27-11-generic/empia/em28xx.ko /lib/modules/2.6.27-11-generic/empia/em28xx-audio.ko /lib/modules/2.6.27-11-generic/empia/em28xx-aad.kothere's all the history of modules I compiled for past kernels, and that I keep installed
Quoted 3 lines
Also send us the output of:
uname -a
efa@01ath3200:~$ uname -a Linux 01ath3200 2.6.28-14-generic #47-Ubuntu SMP Sat Jul 25 00:28:35 UTC 2009 i686 GNU/Linux
Quoted 8 lines
the last stable from Ubuntu 9.04
Valerio
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Note: I meant to say "/lib/modules/2.6.28-14-generic/empia" instead of just /lib/modules/2.6.28-14-generic.
Cheers,
Devin
Signature · 2 lines
Devin J. Heitmueller - Kernel Labs http://www.kernellabs.com
Valerio Messina ha scritto:
Quoted 3 lines
I do not know if is correct that linuxtv.org link to a web site with unsupported product/commercial. Please change the link in page:
http://www.linuxtv.org/wiki/index.php/TerraTec_Cinergy_Hybrid_T_USB_XS
take note that also the page at:
http://www.linuxtv.org/wiki/index.php/TerraTec
three "with a patch" link to:
http://mcentral.de/wiki/index.php/Em2880
where its links, say (Pinnacle, Hauppauge, Terratec) are all unsupported device, but sundtek.
Valerio