Skip to contentSkip to conversation

NFS Mount Configuration File (Vers 3)

PATCH In review Steve Dickson 3 participants 26 messages Aug 6, 2009 – Aug 17, 2009 4 messages not in the archive

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

cover NFS Mount Configuration File (Vers 3)

Hello,

Here is the latest version of these patches. In the version the following changes were made:

1) Section headers how have an argument to them. Similar to [Server "foobar" ] or [MountPoint "/export"]

2) Only the Section names are now case-less. Its up to the caller of the parsing routines to deal with case sensitivity of the data.

Here are the pointers to the two previous versions which will explain the who, what and whys:

http://marc.info/?l=linux-nfs&m=123663164305546&w=2
http://marc.info/?l=linux-nfs&m=124931114811175&w=2

This entire patch set is available at:
http://people.redhat.com/steved/mount-conf/ver03/

and on the 'mount_conf-ver03' branch on my experimental git tree:
git://linux-nfs.org/~steved/nfs-utils-exp.git

Comments?

steved.

_______________________________________________
NFSv4 mailing list
[email protected]
http://linux-nfs.org/cgi-bin/mailman/listinfo/nfsv4

#1 lore raw

PATCH 1/10 NFS Mount Configuration File (Vers 3)

commit 196abf012b67c3dd13cd805566dd1ebb58719b54

Author: Steve Dickson <[email protected]>
Date:   Wed Aug 5 15:47:05 2009 -0400

Move idmapd's configuration file parsing routines into the shared libnfs.a library, making them available to\
other daemons and programs.
=

support/include/Makefile.am +2 -1
index 718abda..f5a77ec 100644
@@ -14,6 +14,7 @@ noinst_HEADERS =3D \
 	xio.h \
 	xlog.h \
 	xmalloc.h \
-	xcommon.h
+	xcommon.h \
+	conffile.h
 =
 

MAINTAINERCLEANFILES =3D Makefile.in

support/include/conffile.h new file +18 -0
new file mode 100644
index 0000000..3309788
@@ -0,0 +1,67 @@
+/* $OpenBSD: conf.h,v 1.30 2004/06/25 20:25:34 hshoexer Exp $	 */
+/* $EOM: conf.h,v 1.13 2000/09/18 00:01:47 ho Exp $	 */
+
+/*
+ * Copyright (c) 1998, 1999, 2001 Niklas Hallqvist.  All rights reserved.
+ * Copyright (c) 2000, 2003 H=E5kan Olsson.  All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTI=

ES
+ * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF US= E,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/*
+ * This code was written under funding by Ericsson Radio Systems.
+ */
+
+#ifndef _CONFFILE_H_
+#define _CONFFILE_H_
+
+#include <sys/queue.h>
+
+struct conf_list_node {
+ TAILQ_ENTRY(conf_list_node) link;
+ char *field;
+};
+
+struct conf_list {
+ size_t cnt;
+ TAILQ_HEAD(conf_list_fields_head, conf_list_node) fields;
+};
+
+extern char *conf_path;
+

+extern int      conf_begin(void);
+extern int      conf_decode_base64(u_int8_t *, u_int32_t *, u_char *);
+extern int      conf_end(int, int);
+extern void     conf_free_list(struct conf_list *);

+extern struct sockaddr *conf_get_address(char *, char *); +extern struct conf_list *conf_get_list(char *, char *); +extern struct conf_list *conf_get_tag_list(char *);
+extern int conf_get_num(char *, char *, int);
+extern char *conf_get_str(char *, char *);

+extern void     conf_init(void);
+extern int      conf_match_num(char *, char *, int);
+extern void     conf_reinit(void);
+extern int      conf_remove(int, char *, char *);
+extern int      conf_remove_section(int, char *);
+extern int      conf_set(int, char *, char *, char *, int, int);
+extern void     conf_report(void);

+
+#endif /* _CONFFILE_H_ */

support/nfs/Makefile.am +1 -1
index 86f52a1..63e1800 100644
@@ -4,7 +4,7 @@ noinst_LIBRARIES =3D libnfs.a
 libnfs_a_SOURCES =3D exports.c rmtab.c xio.c rpcmisc.c rpcdispatch.c \
 		   xlog.c xcommon.c wildmat.c nfssvc.c nfsclient.c \
 		   nfsexport.c getfh.c nfsctl.c rpc_socket.c getport.c \
-		   svc_socket.c cacheio.c closeall.c nfs_mntent.c
+		   svc_socket.c cacheio.c closeall.c nfs_mntent.c conffile.c
 =
 
 MAINTAINERCLEANFILES =3D Makefile.in

=

support/nfs/conffile.c new file +5 -0
new file mode 100644
index 0000000..c5f9fa7
@@ -0,0 +1,850 @@
+/*	$OpenBSD: conf.c,v 1.55 2003/06/03 14:28:16 ho Exp $	*/
+/*	$EOM: conf.c,v 1.48 2000/12/04 02:04:29 angelos Exp $	*/
+
+/*
+ * Copyright (c) 1998, 1999, 2000, 2001 Niklas Hallqvist.  All rights rese=

rved.
+ * Copyright (c) 2000, 2001, 2002 H=E5kan Olsson. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTI= ES
+ * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF US= E,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/*
+ * This code was written under funding by Ericsson Radio Systems.
+ */
+
+#include <sys/param.h>
+#include <sys/mman.h>
+#include <sys/socket.h>
+#include <sys/stat.h>
+#include <netinet/in.h>
+#include <arpa/inet.h>
+#include <ctype.h>
+#include <fcntl.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <unistd.h>
+#include <errno.h>
+#include <err.h>
+#include <syslog.h>
+
+#include "conffile.h"
+#include "xlog.h"
+
+static void conf_load_defaults (int);
+#if 0
+static int conf_find_trans_xf (int, char *);
+#endif
+
+size_t strlcpy(char *, const char *, size_t);
+
+struct conf_trans {
+ TAILQ_ENTRY (conf_trans) link;
+ int trans;
+ enum conf_op { CONF_SET, CONF_REMOVE, CONF_REMOVE_SECTION } op;
+ char *section;
+ char *tag;
+ char *value;
+ int override;
+ int is_default;
+};
+
+TAILQ_HEAD (conf_trans_head, conf_trans) conf_trans_queue;
+
+/*
+ * Radix-64 Encoding.
+ */
+static const u_int8_t bin2asc[]
+ =3D "ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789+/"; +
+static const u_int8_t asc2bin[] =3D
+{

+  255, 255, 255, 255, 255, 255, 255, 255,
+  255, 255, 255, 255, 255, 255, 255, 255,
+  255, 255, 255, 255, 255, 255, 255, 255,
+  255, 255, 255, 255, 255, 255, 255, 255,
+  255, 255, 255, 255, 255, 255, 255, 255,
+  255, 255, 255,  62, 255, 255, 255,  63,
+   52,  53,  54,  55,  56,  57,  58,  59,
+   60,  61, 255, 255, 255, 255, 255, 255,
+  255,   0,   1,   2,   3,   4,   5,   6,
+    7,   8,   9,  10,  11,  12,  13,  14,
+   15,  16,  17,  18,  19,  20,  21,  22,
+   23,  24,  25, 255, 255, 255, 255, 255,
+  255,  26,  27,  28,  29,  30,  31,  32,
+   33,  34,  35,  36,  37,  38,  39,  40,
+   41,  42,  43,  44,  45,  46,  47,  48,
+   49,  50,  51, 255, 255, 255, 255, 255
+};
+
+struct conf_binding {
+  LIST_ENTRY (conf_binding) link;
+  char *section;
+  char *tag;
+  char *value;
+  int is_default;

+};
+
+char *conf_path;
+LIST_HEAD (conf_bindings, conf_binding) conf_bindings[256]; +
+static char *conf_addr;
+
+static __inline__ u_int8_t
+conf_hash(char *s)
+{
+ u_int8_t hash =3D 0;
+
+ while (*s) {
+ hash =3D ((hash << 1) | (hash >> 7)) ^ tolower (*s);
+ s++;
+ }
+ return hash;
+}
+
+/*
+ * Insert a tag-value combination from LINE (the equal sign is at POS)
+ */
+static int
+conf_remove_now(char *section, char *tag)
+{
+ struct conf_binding *cb, *next;
+
+ cb =3D LIST_FIRST(&conf_bindings[conf_hash (section)]);
+ for (; cb; cb =3D next) {
+ next =3D LIST_NEXT(cb, link);
+ if (strcasecmp(cb->section, section) =3D=3D 0
+ && strcasecmp(cb->tag, tag) =3D=3D 0) {
+ LIST_REMOVE(cb, link);
+ xlog(LOG_INFO,"[%s]:%s->%s removed", section, tag, cb->value);
+ free(cb->section);
+ free(cb->tag);
+ free(cb->value);
+ free(cb);
+ return 0;
+ }
+ }
+ return 1;
+}
+
+static int
+conf_remove_section_now(char *section)
+{
+ struct conf_binding *cb, *next;
+ int unseen =3D 1;
+
+ cb =3D LIST_FIRST(&conf_bindings[conf_hash (section)]);
+ for (; cb; cb =3D next) {
+ next =3D LIST_NEXT(cb, link);
+ if (strcasecmp(cb->section, section) =3D=3D 0) {
+ unseen =3D 0;
+ LIST_REMOVE(cb, link);
+ xlog(LOG_INFO, "[%s]:%s->%s removed", section, cb->tag, cb->value);
+ free(cb->section);
+ free(cb->tag);
+ free(cb->value);
+ free(cb);
+ }
+ }
+ return unseen;
+}
+
+/*
+ * Insert a tag-value combination from LINE (the equal sign is at POS)
+ * into SECTION of our configuration database.
+ */
+static int
+conf_set_now(char *section, char *tag, char *value, int override,
+ int is_default)
+{
+ struct conf_binding *node =3D 0;
+
+ if (override)
+ conf_remove_now(section, tag);
+ else if (conf_get_str(section, tag)) {
+ if (!is_default) {
+ xlog(LOG_INFO, "conf_set: duplicate tag [%s]:%s, ignoring...\n", =

+ section, tag);
+ }
+ return 1;
+ }
+
+ node =3D calloc(1, sizeof *node);
+ if (!node) {
+ xlog_warn("conf_set: calloc (1, %lu) failed", (unsigned long)sizeof *nod=
e);
+ return 1;
+ }
+ node->section =3D strdup(section);
+ node->tag =3D strdup(tag);
+ node->value =3D strdup(value);
+ node->is_default =3D is_default;
+
+ LIST_INSERT_HEAD(&conf_bindings[conf_hash (section)], node, link);
+ return 0;
+}
+
+/*
+ * Parse the line LINE of SZ bytes. Skip Comments, recognize section
+ * headers and feed tag-value pairs into our configuration database.
+ */
+static void
+conf_parse_line(int trans, char *line, size_t sz)
+{
+ char *val;
+ size_t i;
+ int j;
+ static char *section =3D 0;
+ static int ln =3D 0;
+
+ /* Lines starting with '#' or ';' are comments. */
+ ln++;
+ if (*line =3D=3D '#' || *line =3D=3D ';')
+ return;
+
+ /* '[section]' parsing... */
+ if (*line =3D=3D '[') {
+ for (i =3D 1; i < sz; i++)
+ if (line[i] =3D=3D ']')
+ break;
+ if (section)
+ free (section);
+ if (i =3D=3D sz) {
+ xlog_warn("conf_parse_line: %d:"
+ "non-matched ']', ignoring until next section", ln);
+ section =3D 0;
+ return;
+ }
+ section =3D malloc(i);
+ if (!section) {
+ xlog_warn("conf_parse_line: %d: malloc (%lu) failed", ln,
+ (unsigned long)i);
+ return;
+ }
+ strlcpy(section, line + 1, i);
+ return;
+ }
+
+ /* Deal with assignments. */
+ for (i =3D 0; i < sz; i++) {
+ if (line[i] =3D=3D '=3D') {
+ /* If no section, we are ignoring the lines. */
+ if (!section) {
+ xlog_warn("conf_parse_line: %d: ignoring line due to no section", =

+ ln);
+ return;
+ }
+ line[strcspn (line, " \t=3D")] =3D '\0';
+ val =3D line + i + 1 + strspn (line + i + 1, " \t");
+ /* Skip trailing whitespace, if any */
+ for (j =3D sz - (val - line) - 1; j > 0 && isspace(val[j]); j--)
+ val[j] =3D '\0';
+ /* XXX Perhaps should we not ignore errors? */
+ conf_set(trans, section, line, val, 0, 0);
+ return;
+ }
+ }
+ /* Other non-empty lines are weird. */
+ i =3D strspn(line, " \t");
+ if (line[i])
+ xlog_warn("conf_parse_line: %d: syntax error", ln);
+
+ return;
+}
+
+/* Parse the mapped configuration file. */
+static void
+conf_parse(int trans, char *buf, size_t sz)
+{
+ char *cp =3D buf;
+ char *bufend =3D buf + sz;
+ char *line;
+
+ line =3D cp;
+ while (cp < bufend) {
+ if (*cp =3D=3D '\n') {
+ /* Check for escaped newlines. */
+ if (cp > buf && *(cp - 1) =3D=3D '\\')
+ *(cp - 1) =3D *cp =3D ' ';
+ else {
+ *cp =3D '\0';
+ conf_parse_line(trans, line, cp - line);
+ line =3D cp + 1;
+ }
+ }
+ cp++;
+ }
+ if (cp !=3D line)
+ xlog_warn("conf_parse: last line non-terminated, ignored.");
+}
+
+static void
+conf_load_defaults(int tr)
+{
+ /* No defaults */
+ return;
+}
+
+void
+conf_init (void)
+{
+ unsigned int i;
+
+ for (i =3D 0; i < sizeof conf_bindings / sizeof conf_bindings[0]; i++)
+ LIST_INIT (&conf_bindings[i]);
+
+ TAILQ_INIT (&conf_trans_queue);
+ conf_reinit();
+}
+
+/* Open the config file and map it into our address space, then parse it. =
*/
+void
+conf_reinit(void)
+{
+ struct conf_binding *cb =3D 0;
+ int fd, trans;
+ unsigned int i;
+ size_t sz;
+ char *new_conf_addr =3D 0;
+ struct stat sb;
+
+ if ((stat (conf_path, &sb) =3D=3D 0) || (errno !=3D ENOENT)) {
+ sz =3D sb.st_size;
+ fd =3D open (conf_path, O_RDONLY, 0);
+ if (fd =3D=3D -1) {
+ xlog_warn("conf_reinit: open (\"%s\", O_RDONLY) failed", conf_path);
+ return;
+ }
+
+ new_conf_addr =3D malloc(sz);
+ if (!new_conf_addr) {
+ xlog_warn("conf_reinit: malloc (%lu) failed", (unsigned long)sz);
+ goto fail;
+ }
+
+ /* XXX I assume short reads won't happen here. */
+ if (read (fd, new_conf_addr, sz) !=3D (int)sz) {
+ xlog_warn("conf_reinit: read (%d, %p, %lu) failed",
+ fd, new_conf_addr, (unsigned long)sz);
+ goto fail;
+ }
+ close(fd);
+
+ trans =3D conf_begin();
+ /* XXX Should we not care about errors and rollback? */
+ conf_parse(trans, new_conf_addr, sz);
+ }
+ else
+ trans =3D conf_begin();
+
+ /* Load default configuration values. */
+ conf_load_defaults(trans);
+
+ /* Free potential existing configuration. */
+ if (conf_addr) {
+ for (i =3D 0; i < sizeof conf_bindings / sizeof conf_bindings[0]; i++) {
+ cb =3D LIST_FIRST (&conf_bindings[i]);
+ for (; cb; cb =3D LIST_FIRST (&conf_bindings[i]))
+ conf_remove_now(cb->section, cb->tag);
+ }
+ free (conf_addr);
+ }
+
+ conf_end(trans, 1);
+ conf_addr =3D new_conf_addr;
+ return;
+
+fail:
+ if (new_conf_addr)
+ free(new_conf_addr);
+ close (fd);
+}
+
+/*
+ * Return the numeric value denoted by TAG in section SECTION or DEF
+ * if that tag does not exist.
+ */
+int
+conf_get_num(char *section, char *tag, int def)
+{
+ char *value =3D conf_get_str(section, tag);
+
+ if (value)
+ return atoi(value);
+
+ return def;
+}
+
+/* Validate X according to the range denoted by TAG in section SECTION. */ +int
+conf_match_num(char *section, char *tag, int x)
+{
+ char *value =3D conf_get_str (section, tag);
+ int val, min, max, n;
+
+ if (!value)
+ return 0;
+ n =3D sscanf (value, "%d,%d:%d", &val, &min, &max);
+ switch (n) {
+ case 1:
+ xlog(LOG_INFO, "conf_match_num: %s:%s %d=3D=3D%d?", section, tag, val, x=
);
+ return x =3D=3D val;
+ case 3:
+ xlog(LOG_INFO, "conf_match_num: %s:%s %d<=3D%d<=3D%d?", section, =

+ tag, min, x, max);
+ return min <=3D x && max >=3D x;
+ default:
+ xlog(LOG_INFO, "conf_match_num: section %s tag %s: invalid number spec %=
s",
+ section, tag, value);
+ }
+ return 0;
+}
+
+/* Return the string value denoted by TAG in section SECTION. */ +char *
+conf_get_str(char *section, char *tag)
+{
+ struct conf_binding *cb;
+
+ cb =3D LIST_FIRST (&conf_bindings[conf_hash (section)]);
+ for (; cb; cb =3D LIST_NEXT (cb, link)) {
+ if (strcasecmp (section, cb->section) =3D=3D 0
+ && strcasecmp (tag, cb->tag) =3D=3D 0)
+ return cb->value;
+ }
+ return 0;
+}
+
+/*
+ * Build a list of string values out of the comma separated value denoted = by
+ * TAG in SECTION.
+ */
+struct conf_list *
+conf_get_list(char *section, char *tag)
+{
+ char *liststr =3D 0, *p, *field, *t;
+ struct conf_list *list =3D 0;
+ struct conf_list_node *node;
+
+ list =3D malloc (sizeof *list);
+ if (!list)
+ goto cleanup;
+ TAILQ_INIT (&list->fields);
+ list->cnt =3D 0;
+ liststr =3D conf_get_str(section, tag);
+ if (!liststr)
+ goto cleanup;
+ liststr =3D strdup (liststr);
+ if (!liststr)
+ goto cleanup;
+ p =3D liststr;
+ while ((field =3D strsep (&p, ",")) !=3D NULL) {
+ /* Skip leading whitespace */
+ while (isspace (*field))
+ field++;
+ /* Skip trailing whitespace */
+ if (p) {
+ for (t =3D p - 1; t > field && isspace (*t); t--)
+ *t =3D '\0';
+ }
+ if (*field =3D=3D '\0') {
+ xlog(LOG_INFO, "conf_get_list: empty field, ignoring...");
+ continue;
+ }
+ list->cnt++;
+ node =3D calloc (1, sizeof *node);
+ if (!node)
+ goto cleanup;
+ node->field =3D strdup (field);
+ if (!node->field) {
+ free(node);
+ goto cleanup;
+ }
+ TAILQ_INSERT_TAIL (&list->fields, node, link);
+ }
+ free (liststr);
+ return list;
+
+cleanup:
+ if (list)
+ conf_free_list(list);
+ if (liststr)
+ free(liststr);
+ return 0;
+}
+
+struct conf_list *
+conf_get_tag_list(char *section)
+{
+ struct conf_list *list =3D 0;
+ struct conf_list_node *node;
+ struct conf_binding *cb;
+
+ list =3D malloc(sizeof *list);
+ if (!list)
+ goto cleanup;
+ TAILQ_INIT(&list->fields);
+ list->cnt =3D 0;
+ cb =3D LIST_FIRST(&conf_bindings[conf_hash (section)]);
+ for (; cb; cb =3D LIST_NEXT(cb, link)) {
+ if (strcasecmp (section, cb->section) =3D=3D 0) {
+ list->cnt++;
+ node =3D calloc(1, sizeof *node);
+ if (!node)
+ goto cleanup;
+ node->field =3D strdup(cb->tag);
+ if (!node->field) {
+ free(node);
+ goto cleanup;
+ }
+ TAILQ_INSERT_TAIL(&list->fields, node, link);
+ }
+ }
+ return list;
+
+cleanup:
+ if (list)
+ conf_free_list(list);
+ return 0;
+}
+
+/* Decode a PEM encoded buffer. */
+int
+conf_decode_base64 (u_int8_t *out, u_int32_t *len, u_char *buf) +{
+ u_int32_t c =3D 0;
+ u_int8_t c1, c2, c3, c4;
+
+ while (*buf) {
+ if (*buf > 127 || (c1 =3D asc2bin[*buf]) =3D=3D 255)
+ return 0;
+
+ buf++;
+ if (*buf > 127 || (c2 =3D asc2bin[*buf]) =3D=3D 255)
+ return 0;
+
+ buf++;
+ if (*buf =3D=3D '=3D') {
+ c3 =3D c4 =3D 0;
+ c++;
+
+ /* Check last four bit */
+ if (c2 & 0xF)
+ return 0;
+
+ if (strcmp((char *)buf, "=3D=3D") =3D=3D 0)
+ buf++;
+ else
+ return 0;
+ } else if (*buf > 127 || (c3 =3D asc2bin[*buf]) =3D=3D 255)
+ return 0;
+ else {
+ if (*++buf =3D=3D '=3D') {
+ c4 =3D 0;
+ c +=3D 2;
+
+ /* Check last two bit */
+ if (c3 & 3)
+ return 0;
+
+ if (strcmp((char *)buf, "=3D"))
+ return 0;
+ } else if (*buf > 127 || (c4 =3D asc2bin[*buf]) =3D=3D 255)
+ return 0;
+ else
+ c +=3D 3;
+ }
+
+ buf++;

+		*out++ =3D (c1 << 2) | (c2 >> 4);
+		*out++ =3D (c2 << 4) | (c3 >> 2);
+		*out++ =3D (c3 << 6) | c4;

+ }
+
+ *len =3D c;
+ return 1;
+}
+
+void
+conf_free_list(struct conf_list *list)
+{
+ struct conf_list_node *node =3D TAILQ_FIRST(&list->fields);
+
+ while (node) {
+ TAILQ_REMOVE(&list->fields, node, link);
+ if (node->field)
+ free(node->field);
+ free (node);
+ node =3D TAILQ_FIRST(&list->fields);
+ }
+ free (list);
+}
+
+int
+conf_begin(void)
+{
+ static int seq =3D 0;
+
+ return ++seq;
+}
+
+static struct conf_trans * +conf_trans_node(int transaction, enum conf_op op) +{
+ struct conf_trans *node;
+
+ node =3D calloc (1, sizeof *node);
+ if (!node) {
+ xlog_warn("conf_trans_node: calloc (1, %lu) failed",
+ (unsigned long)sizeof *node);
+ return 0;
+ }
+ node->trans =3D transaction;
+ node->op =3D op;
+ TAILQ_INSERT_TAIL (&conf_trans_queue, node, link);
+ return node;
+}
+
+/* Queue a set operation. */
+int
+conf_set(int transaction, char *section, char *tag, =

+ char *value, int override, int is_default)
+{
+ struct conf_trans *node;
+
+ node =3D conf_trans_node(transaction, CONF_SET);
+ if (!node)
+ return 1;
+ node->section =3D strdup(section);
+ if (!node->section) {
+ xlog_warn("conf_set: strdup(\"%s\") failed", section);
+ goto fail;
+ }
+ node->tag =3D strdup(tag);
+ if (!node->tag) {
+ xlog_warn("conf_set: strdup(\"%s\") failed", tag);
+ goto fail;
+ }
+ node->value =3D strdup(value);
+ if (!node->value) {
+ xlog_warn("conf_set: strdup(\"%s\") failed", value);
+ goto fail;
+ }
+ node->override =3D override;
+ node->is_default =3D is_default;
+ return 0;
+
+fail:
+ if (node->tag)
+ free(node->tag);
+ if (node->section)
+ free(node->section);
+ if (node)
+ free(node);
+ return 1;
+}
+
+/* Queue a remove operation. */
+int
+conf_remove(int transaction, char *section, char *tag)
+{
+ struct conf_trans *node;
+
+ node =3D conf_trans_node(transaction, CONF_REMOVE);
+ if (!node)
+ goto fail;
+ node->section =3D strdup(section);
+ if (!node->section) {
+ xlog_warn("conf_remove: strdup(\"%s\") failed", section);
+ goto fail;
+ }
+ node->tag =3D strdup(tag);
+ if (!node->tag) {
+ xlog_warn("conf_remove: strdup(\"%s\") failed", tag);
+ goto fail;
+ }
+ return 0;
+
+fail:
+ if (node && node->section)
+ free (node->section);
+ if (node)
+ free (node);
+ return 1;
+}
+
+/* Queue a remove section operation. */
+int
+conf_remove_section(int transaction, char *section)
+{
+ struct conf_trans *node;
+
+ node =3D conf_trans_node(transaction, CONF_REMOVE_SECTION);
+ if (!node)
+ goto fail;
+ node->section =3D strdup(section);
+ if (!node->section) {
+ xlog_warn("conf_remove_section: strdup(\"%s\") failed", section);
+ goto fail;
+ }
+ return 0;
+
+fail:
+ if (node)
+ free(node);
+ return 1;
+}
+
+/* Execute all queued operations for this transaction. Cleanup. */ +int
+conf_end(int transaction, int commit)
+{
+ struct conf_trans *node, *next;
+
+ for (node =3D TAILQ_FIRST(&conf_trans_queue); node; node =3D next) {
+ next =3D TAILQ_NEXT(node, link);
+ if (node->trans =3D=3D transaction) {
+ if (commit) {
+ switch (node->op) {
+ case CONF_SET:
+ conf_set_now(node->section, node->tag, node->value,
+ node->override, node->is_default);
+ break;
+ case CONF_REMOVE:
+ conf_remove_now(node->section, node->tag);
+ break;
+ case CONF_REMOVE_SECTION:
+ conf_remove_section_now(node->section);
+ break;
+ default:
+ xlog(LOG_INFO, "conf_end: unknown operation: %d", node->op);
+ }
+ }
+ TAILQ_REMOVE (&conf_trans_queue, node, link);
+ if (node->section)
+ free(node->section);
+ if (node->tag)
+ free(node->tag);
+ if (node->value)
+ free(node->value);
+ free (node);
+ }
+ }
+ return 0;
+}
+
+/*
+ * Dump running configuration upon SIGUSR1.
+ * Configuration is "stored in reverse order", so reverse it again.
+ */
+struct dumper {
+ char *s, *v;
+ struct dumper *next;
+};
+
+static void
+conf_report_dump(struct dumper *node)
+{
+ /* Recursive, cleanup when we're done. */
+ if (node->next)
+ conf_report_dump(node->next);
+
+ if (node->v)
+ xlog(LOG_INFO, "%s=3D\t%s", node->s, node->v);
+ else if (node->s) {
+ xlog(LOG_INFO, "%s", node->s);
+ if (strlen(node->s) > 0)
+ free(node->s);
+ }
+
+ free (node);
+}
+
+void
+conf_report (void)
+{
+ struct conf_binding *cb, *last =3D 0;
+ unsigned int i, len;
+ char *current_section =3D (char *)0;
+ struct dumper *dumper, *dnode;
+
+ dumper =3D dnode =3D (struct dumper *)calloc(1, sizeof *dumper);
+ if (!dumper)
+ goto mem_fail;
+
+ xlog(LOG_INFO, "conf_report: dumping running configuration");
+
+ for (i =3D 0; i < sizeof conf_bindings / sizeof conf_bindings[0]; i++)
+ for (cb =3D LIST_FIRST(&conf_bindings[i]); cb; cb =3D LIST_NEXT(cb, link=
)) {
+ if (!cb->is_default) {
+ /* Dump this entry. */
+ if (!current_section || strcmp(cb->section, current_section)) {
+ if (current_section) {
+ len =3D strlen (current_section) + 3;
+ dnode->s =3D malloc(len);
+ if (!dnode->s)
+ goto mem_fail;
+
+ snprintf(dnode->s, len, "[%s]", current_section);
+ dnode->next =3D =

+ (struct dumper *)calloc(1, sizeof (struct dumper));
+ dnode =3D dnode->next;
+ if (!dnode)
+ goto mem_fail;
+
+ dnode->s =3D "";
+ dnode->next =3D =

+ (struct dumper *)calloc(1, sizeof (struct dumper));
+ dnode =3D dnode->next;
+ if (!dnode)
+ goto mem_fail;
+ }
+ current_section =3D cb->section;
+ }
+ dnode->s =3D cb->tag;
+ dnode->v =3D cb->value;
+ dnode->next =3D (struct dumper *)calloc (1, sizeof (struct dumper));
+ dnode =3D dnode->next;
+ if (!dnode)
+ goto mem_fail;
+ last =3D cb;
+ }
+ }
+
+ if (last) {
+ len =3D strlen(last->section) + 3;
+ dnode->s =3D malloc(len);
+ if (!dnode->s)
+ goto mem_fail;
+ snprintf(dnode->s, len, "[%s]", last->section);
+ }
+ conf_report_dump(dumper);
+ return;
+
+mem_fail:
+ xlog_warn("conf_report: malloc/calloc failed");
+ while ((dnode =3D dumper) !=3D 0) {
+ dumper =3D dumper->next;
+ if (dnode->s)
+ free(dnode->s);
+ free(dnode);
+ }
+ return;
+}

utils/idmapd/Makefile.am +0 -1
index eb393df..4dabb3d 100644
@@ -14,7 +14,6 @@ EXTRA_DIST =3D \
 =
 
 idmapd_SOURCES =3D \
 	atomicio.c \
-	cfg.c \
 	idmapd.c \
 	strlcat.c \

strlcpy.c \

utils/idmapd/cfg.c deleted +0 -5
deleted file mode 100644
index 16d392a..0000000
@@ -1,893 +0,0 @@
-/*	$OpenBSD: conf.c,v 1.55 2003/06/03 14:28:16 ho Exp $	*/
-/*	$EOM: conf.c,v 1.48 2000/12/04 02:04:29 angelos Exp $	*/
-
-/*
- * Copyright (c) 1998, 1999, 2000, 2001 Niklas Hallqvist.  All rights rese=

rved.
- * Copyright (c) 2000, 2001, 2002 H=E5kan Olsson. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTI= ES
- * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
- * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF US= E,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/*
- * This code was written under funding by Ericsson Radio Systems.
- */
-
-#include <sys/param.h>
-#include <sys/mman.h>
-#include <sys/socket.h>
-#include <sys/stat.h>
-#include <netinet/in.h>
-#include <arpa/inet.h>
-#include <ctype.h>
-#include <fcntl.h>
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <unistd.h>
-#include <errno.h>
-#include <err.h>
-
-#include "cfg.h"
-
-static void conf_load_defaults (int);
-#if 0
-static int conf_find_trans_xf (int, char *);
-#endif
-
-size_t strlcpy(char *, const char *, size_t);
-
-struct conf_trans {

-  TAILQ_ENTRY (conf_trans) link;
-  int trans;
-  enum conf_op { CONF_SET, CONF_REMOVE, CONF_REMOVE_SECTION } op;
-  char *section;
-  char *tag;
-  char *value;
-  int override;
-  int is_default;

-};
-
-TAILQ_HEAD (conf_trans_head, conf_trans) conf_trans_queue;
-
-/*
- * Radix-64 Encoding.
- */
-const u_int8_t bin2asc[]
- =3D "ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789+/"; -
-const u_int8_t asc2bin[] =3D
-{

-  255, 255, 255, 255, 255, 255, 255, 255,
-  255, 255, 255, 255, 255, 255, 255, 255,
-  255, 255, 255, 255, 255, 255, 255, 255,
-  255, 255, 255, 255, 255, 255, 255, 255,
-  255, 255, 255, 255, 255, 255, 255, 255,
-  255, 255, 255,  62, 255, 255, 255,  63,
-   52,  53,  54,  55,  56,  57,  58,  59,
-   60,  61, 255, 255, 255, 255, 255, 255,
-  255,   0,   1,   2,   3,   4,   5,   6,
-    7,   8,   9,  10,  11,  12,  13,  14,
-   15,  16,  17,  18,  19,  20,  21,  22,
-   23,  24,  25, 255, 255, 255, 255, 255,
-  255,  26,  27,  28,  29,  30,  31,  32,
-   33,  34,  35,  36,  37,  38,  39,  40,
-   41,  42,  43,  44,  45,  46,  47,  48,
-   49,  50,  51, 255, 255, 255, 255, 255
-};
-
-struct conf_binding {
-  LIST_ENTRY (conf_binding) link;
-  char *section;
-  char *tag;
-  char *value;
-  int is_default;

-};
-
-char *conf_path;
-LIST_HEAD (conf_bindings, conf_binding) conf_bindings[256];
-
-static char *conf_addr;
-
-static __inline__ u_int8_t
-conf_hash (char *s)
-{
- u_int8_t hash =3D 0;
-
- while (*s)
- {
- hash =3D ((hash << 1) | (hash >> 7)) ^ tolower (*s);
- s++;
- }
- return hash;
-}
-
-/*
- * Insert a tag-value combination from LINE (the equal sign is at POS)
- */
-static int
-conf_remove_now (char *section, char *tag)
-{
- struct conf_binding *cb, *next;
-
- for (cb =3D LIST_FIRST (&conf_bindings[conf_hash (section)]); cb; cb =3D= next)
- {
- next =3D LIST_NEXT (cb, link);
- if (strcasecmp (cb->section, section) =3D=3D 0
- && strcasecmp (cb->tag, tag) =3D=3D 0)
- {

-	  LIST_REMOVE (cb, link);
-	  warnx("[%s]:%s->%s removed", section, tag, cb->value);
-	  free (cb->section);
-	  free (cb->tag);
-	  free (cb->value);
-	  free (cb);
-	  return 0;

- }
- }
- return 1;
-}
-
-static int
-conf_remove_section_now (char *section)
-{
- struct conf_binding *cb, *next;
- int unseen =3D 1;
-
- for (cb =3D LIST_FIRST (&conf_bindings[conf_hash (section)]); cb; cb =3D= next)
- {
- next =3D LIST_NEXT (cb, link);
- if (strcasecmp (cb->section, section) =3D=3D 0)
- {

-	  unseen =3D 0;
-	  LIST_REMOVE (cb, link);
-	  warnx("[%s]:%s->%s removed", section, cb->tag, cb->value);
-	  free (cb->section);
-	  free (cb->tag);
-	  free (cb->value);
-	  free (cb);

- }
- }
- return unseen;
-}
-
-/*
- * Insert a tag-value combination from LINE (the equal sign is at POS)
- * into SECTION of our configuration database.
- */
-static int
-conf_set_now (char *section, char *tag, char *value, int override,
- int is_default)
-{
- struct conf_binding *node =3D 0;
-
- if (override)
- conf_remove_now (section, tag);
- else if (conf_get_str (section, tag))
- {
- if (!is_default)
- warnx("conf_set: duplicate tag [%s]:%s, ignoring...\n", section, tag);
- return 1;
- }
-
- node =3D calloc (1, sizeof *node);
- if (!node)
- {
- warnx("conf_set: calloc (1, %lu) failed", (unsigned long)sizeof *nod=
e);
- return 1;
- }

-  node->section =3D strdup (section);
-  node->tag =3D strdup (tag);
-  node->value =3D strdup (value);
-  node->is_default =3D is_default;

-
- LIST_INSERT_HEAD (&conf_bindings[conf_hash (section)], node, link);
- return 0;
-}
-
-/*
- * Parse the line LINE of SZ bytes. Skip Comments, recognize section
- * headers and feed tag-value pairs into our configuration database.
- */
-static void
-conf_parse_line (int trans, char *line, size_t sz)
-{

-  char *val;
-  size_t i;
-  int j;
-  static char *section =3D 0;
-  static int ln =3D 0;

-
- ln++;
-
- /* Lines starting with '#' or ';' are comments. */
- if (*line =3D=3D '#' || *line =3D=3D ';')
- return;
-
- /* '[section]' parsing... */
- if (*line =3D=3D '[')
- {
- for (i =3D 1; i < sz; i++)
- if (line[i] =3D=3D ']')
- break;
- if (section)
- free (section);
- if (i =3D=3D sz)
- {
- warnx("conf_parse_line: %d:"
- "non-matched ']', ignoring until next section", ln);
- section =3D 0;
- return;
- }
- section =3D malloc (i);
- if (!section)
- {
- warnx("conf_parse_line: %d: malloc (%lu) failed", ln,
- (unsigned long)i);
- return;
- }
- strlcpy (section, line + 1, i);
- return;
- }
-
- /* Deal with assignments. */
- for (i =3D 0; i < sz; i++)
- if (line[i] =3D=3D '=3D')
- {
- /* If no section, we are ignoring the lines. */
- if (!section)
- {
- warnx("conf_parse_line: %d: ignoring line due to no section", ln);
- return;
- }
- line[strcspn (line, " \t=3D")] =3D '\0';
- val =3D line + i + 1 + strspn (line + i + 1, " \t");
- /* Skip trailing whitespace, if any */
- for (j =3D sz - (val - line) - 1; j > 0 && isspace (val[j]); j--)
- val[j] =3D '\0';
- /* XXX Perhaps should we not ignore errors? */
- conf_set (trans, section, line, val, 0, 0);
- return;
- }
-

-  /* Other non-empty lines are weird.  */
-  i =3D strspn (line, " \t");
-  if (line[i])

- warnx("conf_parse_line: %d: syntax error", ln);
-
- return;
-}
-
-/* Parse the mapped configuration file. */
-static void
-conf_parse (int trans, char *buf, size_t sz)
-{

-  char *cp =3D buf;
-  char *bufend =3D buf + sz;
-  char *line;

-
- line =3D cp;
- while (cp < bufend)
- {
- if (*cp =3D=3D '\n')
- {
- /* Check for escaped newlines. */
- if (cp > buf && *(cp - 1) =3D=3D '\\')
- *(cp - 1) =3D *cp =3D ' ';
- else
- {

-	      *cp =3D '\0';
-	      conf_parse_line (trans, line, cp - line);
-	      line =3D cp + 1;

- }
- }
- cp++;
- }
- if (cp !=3D line)
- warnx("conf_parse: last line non-terminated, ignored.");
-}
-
-static void
-conf_load_defaults (int tr)
-{
- /* No defaults */
- return;
-}
-
-void
-conf_init (void)
-{
- unsigned int i;
-
- for (i =3D 0; i < sizeof conf_bindings / sizeof conf_bindings[0]; i++)
- LIST_INIT (&conf_bindings[i]);
- TAILQ_INIT (&conf_trans_queue);
- conf_reinit ();
-}
-
-/* Open the config file and map it into our address space, then parse it. =
*/
-void
-conf_reinit (void)
-{

-  struct conf_binding *cb =3D 0;
-  int fd, trans;
-  unsigned int i;
-  size_t sz;
-  char *new_conf_addr =3D 0;
-  struct stat sb;
-
-  if ((stat (conf_path, &sb) =3D=3D 0) || (errno !=3D ENOENT))
-    {
-      sz =3D sb.st_size;
-      fd =3D open (conf_path, O_RDONLY, 0);
-      if (fd =3D=3D -1)

- {
- warnx("conf_reinit: open (\"%s\", O_RDONLY) failed", conf_path);
- return;
- }
-
- new_conf_addr =3D malloc (sz);
- if (!new_conf_addr)
- {
- warnx("conf_reinit: malloc (%lu) failed", (unsigned long)sz);
- goto fail;
- }
-
- /* XXX I assume short reads won't happen here. */
- if (read (fd, new_conf_addr, sz) !=3D (int)sz)
- {
- warnx("conf_reinit: read (%d, %p, %lu) failed",
- fd, new_conf_addr, (unsigned long)sz);
- goto fail;
- }
- close (fd);
-
- trans =3D conf_begin ();
-
- /* XXX Should we not care about errors and rollback? */
- conf_parse (trans, new_conf_addr, sz);
- }
- else
- trans =3D conf_begin ();
-
- /* Load default configuration values. */
- conf_load_defaults (trans);
-
- /* Free potential existing configuration. */
- if (conf_addr)
- {
- for (i =3D 0; i < sizeof conf_bindings / sizeof conf_bindings[0]; i+=
+)
- for (cb =3D LIST_FIRST (&conf_bindings[i]); cb;
- cb =3D LIST_FIRST (&conf_bindings[i]))
- conf_remove_now (cb->section, cb->tag);
- free (conf_addr);
- }
-

-  conf_end (trans, 1);
-  conf_addr =3D new_conf_addr;
-  return;

-
- fail:
- if (new_conf_addr)
- free (new_conf_addr);
- close (fd);
-}
-
-/*
- * Return the numeric value denoted by TAG in section SECTION or DEF
- * if that tag does not exist.
- */
-int
-conf_get_num (char *section, char *tag, int def)
-{
- char *value =3D conf_get_str (section, tag);
-
- if (value)
- return atoi (value);
- return def;
-}
-
-/* Validate X according to the range denoted by TAG in section SECTION. */ -int
-conf_match_num (char *section, char *tag, int x)
-{
- char *value =3D conf_get_str (section, tag);
- int val, min, max, n;
-
- if (!value)
- return 0;
- n =3D sscanf (value, "%d,%d:%d", &val, &min, &max);
- switch (n)
- {
- case 1:
- warnx("conf_match_num: %s:%s %d=3D=3D%d?", section, tag, val, x);
- return x =3D=3D val;
- case 3:
- warnx("conf_match_num: %s:%s %d<=3D%d<=3D%d?", section, tag, min, x,=
max);
- return min <=3D x && max >=3D x;
- default:
- warnx("conf_match_num: section %s tag %s: invalid number spec %s",
- section, tag, value);
- }
- return 0;
-}
-
-/* Return the string value denoted by TAG in section SECTION. */ -char *
-conf_get_str (char *section, char *tag)
-{
- struct conf_binding *cb;
-
- for (cb =3D LIST_FIRST (&conf_bindings[conf_hash (section)]); cb;
- cb =3D LIST_NEXT (cb, link))
- if (strcasecmp (section, cb->section) =3D=3D 0
- && strcasecmp (tag, cb->tag) =3D=3D 0)
- {
- return cb->value;
- }
- return 0;
-}
-
-/*
- * Build a list of string values out of the comma separated value denoted = by
- * TAG in SECTION.
- */
-struct conf_list *
-conf_get_list (char *section, char *tag)
-{

-  char *liststr =3D 0, *p, *field, *t;
-  struct conf_list *list =3D 0;
-  struct conf_list_node *node;

-
- list =3D malloc (sizeof *list);
- if (!list)
- goto cleanup;

-  TAILQ_INIT (&list->fields);
-  list->cnt =3D 0;
-  liststr =3D conf_get_str (section, tag);
-  if (!liststr)

- goto cleanup;
- liststr =3D strdup (liststr);
- if (!liststr)
- goto cleanup;
- p =3D liststr;
- while ((field =3D strsep (&p, ",")) !=3D NULL)
- {
- /* Skip leading whitespace */
- while (isspace (*field))
- field++;
- /* Skip trailing whitespace */
- if (p)
- for (t =3D p - 1; t > field && isspace (*t); t--)
- *t =3D '\0';
- if (*field =3D=3D '\0')
- {
- warnx("conf_get_list: empty field, ignoring...");
- continue;
- }

-      list->cnt++;
-      node =3D calloc (1, sizeof *node);
-      if (!node)

- goto cleanup;
- node->field =3D strdup (field);
- if (!node->field) {
- free(node);
- goto cleanup;
- }
- TAILQ_INSERT_TAIL (&list->fields, node, link);
- }
- free (liststr);
- return list;
-
- cleanup:
- if (list)
- conf_free_list (list);
- if (liststr)
- free (liststr);
- return 0;
-}
-
-struct conf_list *
-conf_get_tag_list (char *section)
-{

-  struct conf_list *list =3D 0;
-  struct conf_list_node *node;
-  struct conf_binding *cb;

-
- list =3D malloc (sizeof *list);
- if (!list)
- goto cleanup;

-  TAILQ_INIT (&list->fields);
-  list->cnt =3D 0;
-  for (cb =3D LIST_FIRST (&conf_bindings[conf_hash (section)]); cb;

- cb =3D LIST_NEXT (cb, link))
- if (strcasecmp (section, cb->section) =3D=3D 0)
- {
- list->cnt++;
- node =3D calloc (1, sizeof *node);
- if (!node)
- goto cleanup;
- node->field =3D strdup (cb->tag);
- if (!node->field) {
- free(node);
- goto cleanup;
- }
- TAILQ_INSERT_TAIL (&list->fields, node, link);
- }
- return list;
-
- cleanup:
- if (list)
- conf_free_list (list);
- return 0;
-}
-
-/* Decode a PEM encoded buffer. */
-int
-conf_decode_base64 (u_int8_t *out, u_int32_t *len, u_char *buf) -{
- u_int32_t c =3D 0;
- u_int8_t c1, c2, c3, c4;
-
- while (*buf)
- {
- if (*buf > 127 || (c1 =3D asc2bin[*buf]) =3D=3D 255)
- return 0;
- buf++;
-
- if (*buf > 127 || (c2 =3D asc2bin[*buf]) =3D=3D 255)
- return 0;
- buf++;
-
- if (*buf =3D=3D '=3D')
- {
- c3 =3D c4 =3D 0;
- c++;
-
- /* Check last four bit */
- if (c2 & 0xF)
- return 0;
-
- if (strcmp ((char *)buf, "=3D=3D") =3D=3D 0)
- buf++;
- else
- return 0;
- }
- else if (*buf > 127 || (c3 =3D asc2bin[*buf]) =3D=3D 255)
- return 0;
- else
- {
- if (*++buf =3D=3D '=3D')
- {
- c4 =3D 0;
- c +=3D 2;
-
- /* Check last two bit */
- if (c3 & 3)
- return 0;
-
- if (strcmp ((char *)buf, "=3D"))
- return 0;
-
- }
- else if (*buf > 127 || (c4 =3D asc2bin[*buf]) =3D=3D 255)
- return 0;
- else
- c +=3D 3;
- }
-

-      buf++;
-      *out++ =3D (c1 << 2) | (c2 >> 4);
-      *out++ =3D (c2 << 4) | (c3 >> 2);
-      *out++ =3D (c3 << 6) | c4;

- }
-
- *len =3D c;
- return 1;
-
-}
-
-void
-conf_free_list (struct conf_list *list)
-{
- struct conf_list_node *node =3D TAILQ_FIRST (&list->fields); -
- while (node)
- {
- TAILQ_REMOVE (&list->fields, node, link);
- if (node->field)
- free (node->field);
- free (node);
- node =3D TAILQ_FIRST (&list->fields);
- }
- free (list);
-}
-
-int
-conf_begin (void)
-{
- static int seq =3D 0;
-
- return ++seq;
-}
-
-static struct conf_trans *
-conf_trans_node (int transaction, enum conf_op op) -{
- struct conf_trans *node;
-
- node =3D calloc (1, sizeof *node);
- if (!node)
- {
- warnx("conf_trans_node: calloc (1, %lu) failed",
- (unsigned long)sizeof *node);
- return 0;
- }

-  node->trans =3D transaction;
-  node->op =3D op;
-  TAILQ_INSERT_TAIL (&conf_trans_queue, node, link);
-  return node;

-}
-
-/* Queue a set operation. */
-int
-conf_set (int transaction, char *section, char *tag, char *value, int over= ride,
- int is_default)
-{
- struct conf_trans *node;
-
- node =3D conf_trans_node (transaction, CONF_SET);
- if (!node)
- return 1;
- node->section =3D strdup (section);
- if (!node->section)
- {
- warnx("conf_set: strdup (\"%s\") failed", section);
- goto fail;
- }
- node->tag =3D strdup (tag);
- if (!node->tag)
- {
- warnx("conf_set: strdup (\"%s\") failed", tag);
- goto fail;
- }
- node->value =3D strdup (value);
- if (!node->value)
- {
- warnx("conf_set: strdup (\"%s\") failed", value);
- goto fail;
- }

-  node->override =3D override;
-  node->is_default =3D is_default;
-  return 0;

-
- fail:
- if (node->tag)
- free (node->tag);
- if (node->section)
- free (node->section);
- if (node)
- free (node);
- return 1;
-}
-
-/* Queue a remove operation. */
-int
-conf_remove (int transaction, char *section, char *tag)
-{
- struct conf_trans *node;
-
- node =3D conf_trans_node (transaction, CONF_REMOVE);
- if (!node)
- goto fail;
- node->section =3D strdup (section);
- if (!node->section)
- {
- warnx("conf_remove: strdup (\"%s\") failed", section);
- goto fail;
- }
- node->tag =3D strdup (tag);
- if (!node->tag)
- {
- warnx("conf_remove: strdup (\"%s\") failed", tag);
- goto fail;
- }
- return 0;
-
- fail:
- if (node && node->section)
- free (node->section);
- if (node)
- free (node);
- return 1;
-}
-
-/* Queue a remove section operation. */
-int
-conf_remove_section (int transaction, char *section)
-{
- struct conf_trans *node;
-
- node =3D conf_trans_node (transaction, CONF_REMOVE_SECTION);
- if (!node)
- goto fail;
- node->section =3D strdup (section);
- if (!node->section)
- {
- warnx("conf_remove_section: strdup (\"%s\") failed", section);
- goto fail;
- }
- return 0;
-
- fail:
- if (node)
- free (node);
- return 1;
-}
-
-/* Execute all queued operations for this transaction. Cleanup. */ -int
-conf_end (int transaction, int commit)
-{
- struct conf_trans *node, *next;
-
- for (node =3D TAILQ_FIRST (&conf_trans_queue); node; node =3D next)
- {
- next =3D TAILQ_NEXT (node, link);
- if (node->trans =3D=3D transaction)
- {
- if (commit)
- switch (node->op)
- {
- case CONF_SET:
- conf_set_now (node->section, node->tag, node->value,
- node->override, node->is_default);
- break;
- case CONF_REMOVE:
- conf_remove_now (node->section, node->tag);
- break;
- case CONF_REMOVE_SECTION:
- conf_remove_section_now (node->section);
- break;
- default:
- warnx("conf_end: unknown operation: %d", node->op);
- }
- TAILQ_REMOVE (&conf_trans_queue, node, link);
- if (node->section)
- free (node->section);
- if (node->tag)
- free (node->tag);
- if (node->value)
- free (node->value);
- free (node);
- }
- }
- return 0;
-}
-
-/*
- * Dump running configuration upon SIGUSR1.
- * Configuration is "stored in reverse order", so reverse it again.
- */
-struct dumper {
- char *s, *v;
- struct dumper *next;
-};
-
-static void
-conf_report_dump (struct dumper *node)
-{
- /* Recursive, cleanup when we're done. */
-
- if (node->next)
- conf_report_dump (node->next);
-
- if (node->v)
- warnx("%s=3D\t%s", node->s, node->v);
- else if (node->s)
- {
- warnx("%s", node->s);
- if (strlen (node->s) > 0)
- free (node->s);
- }
-
- free (node);
-}
-
-void
-conf_report (void)
-{

-  struct conf_binding *cb, *last =3D 0;
-  unsigned int i, len;
-  char *current_section =3D (char *)0;
-  struct dumper *dumper, *dnode;

-
- dumper =3D dnode =3D (struct dumper *)calloc (1, sizeof *dumper);
- if (!dumper)
- goto mem_fail;
-
- warnx("conf_report: dumping running configuration");
-
- for (i =3D 0; i < sizeof conf_bindings / sizeof conf_bindings[0]; i++)
- for (cb =3D LIST_FIRST (&conf_bindings[i]); cb;
- cb =3D LIST_NEXT (cb, link))
- {
- if (!cb->is_default)
- {

-	    /* Dump this entry.  */
-	    if (!current_section || strcmp (cb->section, current_section))
-	      {
-		if (current_section)
-		  {
-		    len =3D strlen (current_section) + 3;
-		    dnode->s =3D malloc (len);
-		    if (!dnode->s)

- goto mem_fail;
-
- snprintf (dnode->s, len, "[%s]", current_section);
- dnode->next
- =3D (struct dumper *)calloc (1, sizeof (struct dumper));
- dnode =3D dnode->next;
- if (!dnode)
- goto mem_fail;
-
- dnode->s =3D "";
- dnode->next
- =3D (struct dumper *)calloc (1, sizeof (struct dumper));
- dnode =3D dnode->next;
- if (!dnode)
- goto mem_fail;
- }
- current_section =3D cb->section;
- }

-	    dnode->s =3D cb->tag;
-	    dnode->v =3D cb->value;
-	    dnode->next =3D (struct dumper *)calloc (1, sizeof (struct dumper));
-	    dnode =3D dnode->next;
-	    if (!dnode)

- goto mem_fail;
- last =3D cb;
- }
- }
-
- if (last)
- {

-      len =3D strlen (last->section) + 3;
-      dnode->s =3D malloc (len);
-      if (!dnode->s)

- goto mem_fail;
- snprintf (dnode->s, len, "[%s]", last->section);
- }
-
- conf_report_dump (dumper);
-
- return;
-
- mem_fail:
- warnx("conf_report: malloc/calloc failed");
- while ((dnode =3D dumper) !=3D 0)
- {
- dumper =3D dumper->next;
- if (dnode->s)
- free (dnode->s);
- free (dnode);
- }
- return;
-}

utils/idmapd/cfg.h deleted +0 -18
deleted file mode 100644
index c1ca940..0000000
@@ -1,67 +0,0 @@
-/* $OpenBSD: conf.h,v 1.30 2004/06/25 20:25:34 hshoexer Exp $	 */
-/* $EOM: conf.h,v 1.13 2000/09/18 00:01:47 ho Exp $	 */
-
-/*
- * Copyright (c) 1998, 1999, 2001 Niklas Hallqvist.  All rights reserved.
- * Copyright (c) 2000, 2003 H=E5kan Olsson.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTI=

ES
- * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
- * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF US= E,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/*
- * This code was written under funding by Ericsson Radio Systems.
- */
-
-#ifndef _CONF_H_
-#define _CONF_H_
-
-#include "queue.h"
-
-struct conf_list_node {
- TAILQ_ENTRY(conf_list_node) link;
- char *field;
-};
-
-struct conf_list {
- size_t cnt;
- TAILQ_HEAD(conf_list_fields_head, conf_list_node) fields;
-};
-
-extern char *conf_path;
-

-extern int      conf_begin(void);
-extern int      conf_decode_base64(u_int8_t *, u_int32_t *, u_char *);
-extern int      conf_end(int, int);
-extern void     conf_free_list(struct conf_list *);

-extern struct sockaddr *conf_get_address(char *, char *); -extern struct conf_list *conf_get_list(char *, char *); -extern struct conf_list *conf_get_tag_list(char *);
-extern int conf_get_num(char *, char *, int);
-extern char *conf_get_str(char *, char *);

-extern void     conf_init(void);
-extern int      conf_match_num(char *, char *, int);
-extern void     conf_reinit(void);
-extern int      conf_remove(int, char *, char *);
-extern int      conf_remove_section(int, char *);
-extern int      conf_set(int, char *, char *, char *, int, int);
-extern void     conf_report(void);

-
-#endif /* _CONF_H_ */

utils/idmapd/idmapd.c +1 -1
index 9cbe96c..65a6a2a 100644
@@ -66,7 +66,7 @@
 #endif /* HAVE_CONFIG_H */
 =
 
 #include "xlog.h"
-#include "cfg.h"
+#include "conffile.h"
 #include "queue.h"
 #include "nfslib.h"

=

@@ -156,7 +156,7 @@ static char *nobodyuser, *nobodygroup;
static uid_t nobodyuid;
static gid_t nobodygid;
=

-/* Used by cfg.c */
+/* Used by conffile.c in libnfs.a */
char *conf_path;
=

static int

#4 lore raw

PATCH 3/10 NFS Mount Configuration File (Vers 3)

In reply to Steve Dickson

commit 3d08862cfebb9fb8a360d362bb9e5e761e6b1fb5

Author: Steve Dickson <[email protected]>
Date:   Wed Aug 5 15:53:36 2009 -0400

Make Section names case-insensitive which should help in locating them resulting in make the config files a bit less error prone

support/nfs/conffile.c +15 -0
index 5f491eb..a8b8037 100644
@@ -116,6 +116,18 @@ conf_hash(char *s)
 }
 
 /*
+ * Convert letter from upper case to lower case
+ */
+static inline void upper2lower(char *str)
+{
+	char *ptr = str;
+
+	while (*ptr) 
+		*ptr++ = tolower(*ptr);
+}
+
+
+/*
  * Insert a tag-value combination from LINE (the equal sign is at POS)
  */
 static int
@@ -654,6 +666,9 @@ conf_set(int transaction, char *section, char *tag,
 		xlog_warn("conf_set: strdup(\"%s\") failed", section);
 		goto fail;
 	}
+	/* Make Section names case-insensitive */
+	upper2lower(node->section);
+
 	node->tag = strdup(tag);
 	if (!node->tag) {
 		xlog_warn("conf_set: strdup(\"%s\") failed", tag);
#9 lore raw

PATCH 4/10 NFS Mount Configuration File (Vers 3)

In reply to Steve Dickson

commit fede9b293a8faf6c4214f6dabdb1d8664929901d

Author: Steve Dickson <[email protected]>
Date:   Wed Aug 5 16:02:33 2009 -0400

Added an conditional argument to the Section names with the format being:
[ Section <"argument"> ]
This will help group similar functioning Section together. The argument is conditional but must be surrounded by the '"' characters.

The new conf_get_section() interface can used to locate a Section by its Section name and/or argument.

support/include/conffile.h +1 -1
index 3309788..b263581 100644
@@ -56,12 +56,12 @@ extern struct conf_list *conf_get_list(char *, char *);
 extern struct conf_list *conf_get_tag_list(char *);
 extern int      conf_get_num(char *, char *, int);
 extern char    *conf_get_str(char *, char *);
+extern char    *conf_get_section(char *, char *, char *);
 extern void     conf_init(void);
 extern int      conf_match_num(char *, char *, int);
 extern void     conf_reinit(void);
 extern int      conf_remove(int, char *, char *);
 extern int      conf_remove_section(int, char *);
-extern int      conf_set(int, char *, char *, char *, int, int);
 extern void     conf_report(void);
 
 #endif				/* _CONFFILE_H_ */
support/nfs/conffile.c +96 -18

258 lines not on this page · raw message

#11 lore raw

PATCH 2/10 NFS Mount Configuration File (Vers 3)

In reply to a message not in the archive

commit f6f4d0b872c01eaffbcb4c3919f13237aa8678e1

Author: Steve Dickson <[email protected]>
Date:   Mon Mar 9 13:55:25 2009 -0400

Taught conf_parse_line() to ignore spaces in the
'[section]' parsing and before the assignment statements

support/nfs/conffile.c +26 -9
index c5f9fa7..5f491eb 100644
@@ -50,11 +50,6 @@
 #include "xlog.h"
 
 static void conf_load_defaults (int);
-#if 0
-static int conf_find_trans_xf (int, char *);
-#endif
-
-size_t  strlcpy(char *, const char *, size_t);
 
 struct conf_trans {
 	TAILQ_ENTRY (conf_trans) link;
@@ -219,26 +214,48 @@ conf_parse_line(int trans, char *line, size_t sz)
 	if (*line == '#' || *line == ';')
 		return;
 
+	/* Ignore blank lines */
+	if (*line == '\0')
+		return;
+
+	/* Strip off any leading blanks */
+	while (isblank(*line)) 
+		line++;
+
 	/* '[section]' parsing...  */
 	if (*line == '[') {
-		for (i = 1; i < sz; i++)
-			if (line[i] == ']')
+		line++;
+		/* Strip off any blanks after '[' */
+		while (isblank(*line)) 
+			line++;
+
+		for (i = 0; i < sz; i++) {
+			if (line[i] == ']') {
 				break;
+			}
+		}
 		if (section)
-			free (section);
+			free(section);
 		if (i == sz) {
 			xlog_warn("conf_parse_line: %d:"
  				"non-matched ']', ignoring until next section", ln);
 			section = 0;
 			return;
 		}
+		/* Strip off any blanks before ']' */
+		val = line;
+		while (*val && !isblank(*val)) 
+			val++, j++;
+		if (*val)
+			i = j;
+
 		section = malloc(i);
 		if (!section) {
 			xlog_warn("conf_parse_line: %d: malloc (%lu) failed", ln,
 						(unsigned long)i);
 			return;
 		}
-		strlcpy(section, line + 1, i);
+		strncpy(section, line, i);
 		return;
 	}
 
#19 lore raw

PATCH 6/10 NFS Mount Configuration File (Vers 3)

In reply to Steve Dickson

commit 8e88dd908d8b5ff07649c375ff638ee6ca964ead

Author: Steve Dickson <[email protected]>
Date:   Wed Aug 5 16:17:38 2009 -0400

Support routines used to read sections from the configuration file and parse them into comma separated mount options.

utils/mount/Makefile.am +4 -0
index 459fa45..a1b56ca 100644
@@ -17,6 +17,10 @@ mount_nfs_SOURCES = mount.c error.c network.c fstab.c token.c \
 		    parse_opt.h parse_dev.h \
 		    nfs4_mount.h nfs_mount4.h stropts.h version.h
 
+if MOUNT_CONFIG
+mount_nfs_SOURCES += configfile.c
+endif
+
 mount_nfs_LDADD = ../../support/nfs/libnfs.a \
 		  ../../support/export/libexport.a
 
utils/mount/configfile.c new file +317 -0

317 lines not on this page · raw message

#22 lore raw

PATCH 7/10 NFS Mount Configuration File (Vers 3)

In reply to Steve Dickson

commit eab66bd02db90965d1cbf4e100a274a4e3e6e29e

Author: Steve Dickson <[email protected]>
Date:   Sun Aug 2 12:37:19 2009 -0400

Added hooks to the mount command that allow mount options to be set in a configuration file

utils/mount/mount.c +18 -0
index a668cd9..30d087e 100644
@@ -47,6 +47,11 @@
 #include "stropts.h"
 #include "version.h"
 
+#ifdef MOUNT_CONFIG
+#include "conffile.h"
+extern char *conf_get_mntopts(char *, char *, char *);
+#endif
+
 char *progname;
 int nfs_mount_data_version;
 int nomtab;
@@ -474,6 +479,13 @@ int main(int argc, char *argv[])
 	spec = argv[1];
 	mount_point = argv[2];
 
+#ifdef MOUNT_CONFIG
+	/*
+	 * Read the the default mount options
+	 */
+	conf_init();
+#endif
+
 	argv[2] = argv[0]; /* so that getopt error messages are correct */
 	while ((c = getopt_long(argc - 2, argv + 2, "rvVwfno:hs",
 				longopts, NULL)) != -1) {
@@ -559,6 +571,12 @@ int main(int argc, char *argv[])
 		mnt_err = EX_USAGE;
 		goto out;
 	}
+#ifdef MOUNT_CONFIG
+	/*
+	 * Concatenate mount options from the configuration file
+	 */
+	mount_opts = conf_get_mntopts(spec, mount_point, mount_opts);
+#endif
 
 	parse_opts(mount_opts, &flags, &extra_opts);
#17 lore raw

PATCH 5/10 NFS Mount Configuration File (Vers 3)

In reply to a message not in the archive

commit a534e4fef0ee59a33548aa9a342dad588ae605df

Author: Steve Dickson <[email protected]>
Date:   Wed Aug 5 16:10:01 2009 -0400

Adds '--enable-mountconfig' configuration flag that will enabled mount to read from a configuration file. The default value is disabled (or no)

Adds '--with-mountfile' configuration flag that is used when mountconf is enabled to define the configuration file name. The default is /etc/nfsmount.conf.

configure.ac +25 -0
index e0ca70e..1b653e4 100644
@@ -136,6 +136,31 @@ AC_ARG_ENABLE(ipv6,
 	AC_SUBST(enable_ipv6)
 	AM_CONDITIONAL(CONFIG_IPV6, [test "$enable_ipv6" = "yes"])
 
+if test "$enable_mount" = yes; then
+	AC_ARG_ENABLE(mountconfig,
+	[AC_HELP_STRING([--enable-mountconfig],
+                        [enable mount to use a configuration file])],
+	mountconfig=$enableval,
+	mountconfig=no)
+	if test "$enable_mountconfig" = yes; then
+		AC_DEFINE(MOUNT_CONFIG, 1, 
+			[Define this if you want mount to read a configuration file])
+		AC_ARG_WITH(mountfile,
+			[AC_HELP_STRING([--with-mountfile=filename],
+			[Using filename as the NFS mount options file [/etc/nfsmounts.conf]]
+			)],
+		mountfile=$withval,
+		mountfile=/etc/nfsmount.conf)
+		AC_SUBST(mountfile)
+		AC_DEFINE_UNQUOTED(MOUNTOPTS_CONFFILE, "$mountfile", 
+			[This defines the location of the NFS mount configuration file])
+	else
+		enable_mountconfig=
+	fi
+	AC_SUBST(enable_mountconfig)
+	AM_CONDITIONAL(MOUNT_CONFIG, [test "$enable_mountconfig" = "yes"])
+fi
+
 dnl Check for TI-RPC library and headers
 AC_LIBTIRPC
 
#27 lore raw

PATCH 9/10 NFS Mount Configuration File (Vers 3)

In reply to Steve Dickson

commit 6fe11af2fe9eacf785bf71f34251569bff197ebe

Author: Steve Dickson <[email protected]>
Date:   Wed Aug 5 17:07:21 2009 -0400

The example nfsmount.conf file

utils/mount/Makefile.am +1 -0
index 5c1e5ad..451ec90 100644
@@ -20,6 +20,7 @@ mount_nfs_SOURCES = mount.c error.c network.c fstab.c token.c \
 if MOUNT_CONFIG
 mount_nfs_SOURCES += configfile.c
 man5_MANS += nfsmount.conf.man
+EXTRA_DIST += nfsmount.conf
 endif
 
 mount_nfs_LDADD = ../../support/nfs/libnfs.a \
utils/mount/nfsmount.conf new file +120 -0

120 lines not on this page · raw message

#28 lore raw

PATCH 10/10 NFS Mount Configuration File (Vers 3)

In reply to Steve Dickson

commit 8157fe02ca0d056eb58ba94e8dabd14ead29d2fd

Author: Steve Dickson <[email protected]>
Date:   Thu Aug 6 13:11:00 2009 -0400

Now that only the Section names are case-insensitive the mount code has to make sure the the mount options given to the kernel are in the correct case.

Fixed a couple of warnings on #ifndefs

support/include/conffile.h +10 -0
index b263581..6fc5d60 100644
@@ -64,4 +64,14 @@ extern int      conf_remove(int, char *, char *);
 extern int      conf_remove_section(int, char *);
 extern void     conf_report(void);
 
+/*
+ * Convert letter from upper case to lower case
+ */
+static inline void upper2lower(char *str)
+{
+	char *ptr = str;
+
+	while (*ptr) 
+		*ptr++ = tolower(*ptr);
+}
 #endif				/* _CONFFILE_H_ */
support/nfs/conffile.c +0 -12
index 97dc88a..b19b739 100644
@@ -120,18 +120,6 @@ conf_hash(char *s)
 }
 
 /*
- * Convert letter from upper case to lower case
- */
-static inline void upper2lower(char *str)
-{
-	char *ptr = str;
-
-	while (*ptr) 
-		*ptr++ = tolower(*ptr);
-}
-
-
-/*
  * Insert a tag-value combination from LINE (the equal sign is at POS)
  */
 static int
utils/mount/configfile.c +6 -3
index cad8c52..e347b0e 100644
@@ -37,11 +37,11 @@
 #define NFSMOUNT_GLOBAL_OPTS "NFSMount_Global_Options"
 #endif
 
-#ifndef NFSMOUNT_MOUNTPOINT  "MountPoint"
+#ifndef NFSMOUNT_MOUNTPOINT
 #define NFSMOUNT_MOUNTPOINT "MountPoint"
 #endif
 
-#ifndef NFSMOUNT_SERVER "Server"
+#ifndef NFSMOUNT_SERVER
 #define NFSMOUNT_SERVER "Server"
 #endif
 
@@ -83,6 +83,9 @@ char *mountopts_alias(char *opt, int *argtype)
 		*argtype = mnt_alias_tab[i].argtype;
 		return mnt_alias_tab[i].opt;
 	}
+	/* Make option names case-insensitive */
+	upper2lower(opt);
+
 	return opt;
 }
 /*
@@ -202,7 +205,7 @@ conf_parse_mntopts(char *section, char *arg, char *opts)
 		 * Do not overwrite options if already exists 
 		 */
 		snprintf(buf, BUFSIZ, "%s=", node->field);
-		if (opts && strstr(opts, buf) != NULL)
+		if (opts && strcasestr(opts, buf) != NULL)
 			continue;
 		if (lookup_entry(node->field) != NULL)
 			continue;
#18 lore raw

PATCH 8/10 NFS Mount Configuration File (Vers 3)

In reply to a message not in the archive

commit eba88370ed83a3bbfe5f4b1ef85b64da702b5e84

Author: Steve Dickson <[email protected]>
Date:   Wed Aug 5 17:04:00 2009 -0400

The new nfsmount.conf(5) man page and the update to the nfs(5) man page

utils/mount/Makefile.am +1 -0
index a1b56ca..5c1e5ad 100644
@@ -19,6 +19,7 @@ mount_nfs_SOURCES = mount.c error.c network.c fstab.c token.c \
 
 if MOUNT_CONFIG
 mount_nfs_SOURCES += configfile.c
+man5_MANS += nfsmount.conf.man
 endif
 
 mount_nfs_LDADD = ../../support/nfs/libnfs.a \
utils/mount/nfs.man +45 -0

51 lines not on this page · raw message

utils/mount/nfsmount.conf.man new file +87 -0

87 lines not on this page · raw message

#24 lore raw
In reply to a message not in the archive

How come the short descriptions (Subject:) for all of these patches are identical?

Quoted 14 lines · Steve Dickson

commit eab66bd02db90965d1cbf4e100a274a4e3e6e29e

Author: Steve Dickson <[email protected]>
Date:   Sun Aug 2 12:37:19 2009 -0400

Added hooks to the mount command that allow mount options to be set in a configuration file

utils/mount/mount.c +0 -0
index a668cd9..30d087e 100644

utils/mount/mount.c line 52

Quoted 6 lines
utils/mount/mount.c +3 -0
@@ -47,6 +47,11 @@
 #include "stropts.h"
 #include "version.h"
 
+#ifdef MOUNT_CONFIG
+#include "conffile.h"
+extern char *conf_get_mntopts(char *, char *, char *);

Can this forward declaration be added to conffile.h ?

Quoted 6 lines
utils/mount/mount.c +2 -0
+#endif
+
 char *progname;
 int nfs_mount_data_version;
 int nomtab;

utils/mount/mount.c int main(int argc, char *argv[]) · line 487

Quoted 9 lines
utils/mount/mount.c +6 -0
@@ -474,6 +479,13 @@ int main(int argc, char *argv[])
 	spec = argv[1];
 	mount_point = argv[2];
 
+#ifdef MOUNT_CONFIG
+	/*
+	 * Read the the default mount options
+	 */
+	conf_init();
+#endif

It would be cleaner if the #ifdefs were moved to conf_init() (and above, for the #include, and below, into conf_get_mntopts()). If MOUNT_CONFIG isn't set, then configfile.o would just contain stubs, but it would then always be built.

Otherwise, we end up with each new feature adding #ifdefs in the mainline code, and eventually it becomes unreadable.

Quoted 6 lines
utils/mount/mount.c +1 -0
+
 	argv[2] = argv[0]; /* so that getopt error messages are correct */
 	while ((c = getopt_long(argc - 2, argv + 2, "rvVwfno:hs",
 				longopts, NULL)) != -1) {
@@ -559,6 +571,12 @@ int main(int argc, char *argv[])
 		mnt_err = EX_USAGE;

utils/mount/mount.c int main(int argc, char *argv[]) · line 581

Quoted 10 lines
utils/mount/mount.c +6 -0
 		goto out;
 	}
+#ifdef MOUNT_CONFIG
+	/*
+	 * Concatenate mount options from the configuration file
+	 */
+	mount_opts = conf_get_mntopts(spec, mount_point, mount_opts);
+#endif
 
 	parse_opts(mount_opts, &flags, &extra_opts);

--
Chuck Lever
chuck[dot]lever[at]oracle[dot]com

#20 lore raw
In reply to Steve Dickson
Quoted 342 lines · Steve Dickson

commit 8e88dd908d8b5ff07649c375ff638ee6ca964ead

Author: Steve Dickson <[email protected]>
Date:   Wed Aug 5 16:17:38 2009 -0400

Support routines used to read sections from the configuration file and parse them into comma separated mount options.

utils/mount/Makefile.am +4 -0
index 459fa45..a1b56ca 100644
@@ -17,6 +17,10 @@ mount_nfs_SOURCES = mount.c error.c network.c  
 fstab.c token.c \
 		    parse_opt.h parse_dev.h \
 		    nfs4_mount.h nfs_mount4.h stropts.h version.h
 
+if MOUNT_CONFIG
+mount_nfs_SOURCES += configfile.c
+endif
+
 mount_nfs_LDADD = ../../support/nfs/libnfs.a \
 		  ../../support/export/libexport.a
utils/mount/configfile.c new file +8 -0
new file mode 100644
index 0000000..cad8c52
@@ -0,0 +1,317 @@
+/*
+ * configfile.c -- mount configuration file manipulation
+ * Copyright (C) 2008 Red Hat, Inc <[email protected]>
+ *
+ * - Routines use to create mount options from the mount
+ *   configuration file.
+ *
+ * This program is free software; you can redistribute it and/or  

modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */

utils/mount/configfile.c new file +280 -0
+#ifdef HAVE_CONFIG_H
+#include <config.h>
+#endif
+#include <sys/types.h>
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <ctype.h>
+
+#include "xlog.h"
+#include "conffile.h"
+
+#define KBYTES(x)     ((x) * (1024))
+#define MEGABYTES(x)  ((x) * (1048576))
+#define GIGABYTES(x)  ((x) * (1073741824))
+
+#ifndef NFSMOUNT_GLOBAL_OPTS
+#define NFSMOUNT_GLOBAL_OPTS "NFSMount_Global_Options"
+#endif
+
+#ifndef NFSMOUNT_MOUNTPOINT  "MountPoint"
+#define NFSMOUNT_MOUNTPOINT "MountPoint"
+#endif
+
+#ifndef NFSMOUNT_SERVER "Server"
+#define NFSMOUNT_SERVER "Server"
+#endif
+
+#ifndef MOUNTOPTS_CONFFILE
+#define MOUNTOPTS_CONFFILE "/etc/nfsmount.conf"
+#endif
+char *conf_path = MOUNTOPTS_CONFFILE;
+enum {
+	MNT_NOARG=0,
+	MNT_INTARG,
+	MNT_STRARG,
+	MNT_SPEC,
+	MNT_UNSET
+};
+struct mnt_alias {
+	char *alias;
+	char *opt;
+	int  argtype;
+} mnt_alias_tab[] = {
+	{"background", "bg", MNT_NOARG},
+	{"foreground", "fg", MNT_NOARG},
+	{"sloppy", "sloppy", MNT_NOARG},
+};
+int mnt_alias_sz = (sizeof(mnt_alias_tab)/sizeof(mnt_alias_tab[0]));
+
+/*
+ * See if the option is an alias, if so return the
+ * real mount option along with the argument type.
+ */
+inline static
+char *mountopts_alias(char *opt, int *argtype)
+{
+	int i;
+
+	*argtype = MNT_UNSET;
+	for (i=0; i < mnt_alias_sz; i++) {
+		if (strcasecmp(opt, mnt_alias_tab[i].alias) != 0)
+			continue;
+		*argtype = mnt_alias_tab[i].argtype;
+		return mnt_alias_tab[i].opt;
+	}
+	return opt;
+}
+/*
+ * Convert numeric strings that end with 'k', 'm' or 'g'
+ * into numeric strings with the real value.
+ * Meaning '8k' becomes '8094'.
+ */
+char *mountopts_convert(char *value)
+{
+	unsigned long long factor, num;
+	static char buf[64];
+	char *ch;
+
+	ch = &value[strlen(value)-1];
+	switch (tolower(*ch)) {
+	case 'k':
+		factor = KBYTES(1);
+		break;
+	case 'm':
+		factor = MEGABYTES(1);
+		break;
+	case 'g':
+		factor = GIGABYTES(1);
+		break;
+	default:
+		return value;
+	}
+	*ch = '\0';
+	if (strncmp(value, "0x", 2) == 0) {
+		num = strtol(value, (char **)NULL, 16);
+	} else if (strncmp(value, "0", 1) == 0) {
+		num = strtol(value, (char **)NULL, 8);
+	} else {
+		num = strtol(value, (char **)NULL, 10);
+	}
+	num *= factor;
+	snprintf(buf, 64, "%lld", num);
+
+	return buf;
+}
+
+struct entry {
+	SLIST_ENTRY(entry) entries;
+	char *opt;
+};
+static SLIST_HEAD(shead, entry) head = SLIST_HEAD_INITIALIZER(head);
+static int list_size;
+
+/*
+ * Add option to the link list
+ */
+inline static void
+add_entry(char *opt)
+{
+	struct entry *entry;
+
+	entry = calloc(1, sizeof(struct entry));
+	if (entry == NULL) {
+		xlog_warn("Unable calloc memory for mount configs");
+		return;
+	}
+	entry->opt = strdup(opt);
+	if (entry->opt == NULL) {
+		xlog_warn("Unable calloc memory for mount opts");
+		free(entry);
+		return;
+	}
+	SLIST_INSERT_HEAD(&head, entry, entries);
+}
+/*
+ * See if the given entry exists if the link list,
+ * if so return that entry
+ */
+inline static
+char *lookup_entry(char *opt)
+{
+	struct entry *entry;
+
+	SLIST_FOREACH(entry, &head, entries) {
+		if (strcasecmp(entry->opt, opt) == 0)
+			return opt;
+	}
+	return NULL;
+}
+/*
+ * Free all entries on the link list
+ */
+inline static
+void free_all(void)
+{
+	struct entry *entry;
+
+	while (!SLIST_EMPTY(&head)) {
+		entry = SLIST_FIRST(&head);
+		SLIST_REMOVE_HEAD(&head, entries);
+		free(entry->opt);
+		free(entry);
+	}
+}
+/*
+ * Parse the given section of the configuration
+ * file to if there are any mount options set.
+ * If so, added them to link list.
+ */
+static void
+conf_parse_mntopts(char *section, char *arg, char *opts)
+{
+	struct conf_list *list;
+	struct conf_list_node *node;
+	char buf[BUFSIZ], *value, *field;
+	char *nvalue, *ptr;
+	int argtype;
+
+	list = conf_get_tag_list(section);
+	TAILQ_FOREACH(node, &list->fields, link) {
+		/*
+		 * Do not overwrite options if already exists
+		 */
+		snprintf(buf, BUFSIZ, "%s=", node->field);
+		if (opts && strstr(opts, buf) != NULL)
+			continue;
+		if (lookup_entry(node->field) != NULL)
+			continue;
+		buf[0] = '\0';
+		value = conf_get_section(section, arg, node->field);
+		if (value == NULL)
+			continue;
+		field = mountopts_alias(node->field, &argtype);
+		if (strcasecmp(value, "false") == 0) {
+			if (argtype != MNT_NOARG)
+				snprintf(buf, BUFSIZ, "no%s", field);
+		} else if (strcasecmp(value, "true") == 0) {
+			snprintf(buf, BUFSIZ, "%s", field);
+		} else {
+			nvalue = strdup(value);
+			ptr = mountopts_convert(nvalue);
+			snprintf(buf, BUFSIZ, "%s=%s", field, ptr);
+			free(nvalue);
+		}
+		if (buf[0] == '\0')
+			continue;
+		/*
+		 * Keep a running tally of the list size adding
+		 * one for the ',' that will be appened later
+		 */
+		list_size += strlen(buf) + 1;
+		add_entry(buf);
+	}
+	conf_free_list(list);
+}
+
+/*
+ * Concatenate options from the configuration file with the
+ * given options by building a link list of options from the
+ * different sections in the conf file. Options that exists
+ * in the either the given options or link list are not
+ * overwritten so it matter which when each section is
+ * parsed.
+ */
+char *conf_get_mntopts(char *spec, char *mount_point,
+	char *mount_opts)
+{
+	struct entry *entry;
+	char *ptr, *server, *config_opts;
+	int optlen = 0;
+
+	SLIST_INIT(&head);
+	list_size = 0;
+	/*
+	 * First see if there are any mount options relative
+	 * to the mount point.
+	 */
+	conf_parse_mntopts(NFSMOUNT_MOUNTPOINT, mount_point, mount_opts);
+
+	/*
+	 * Next, see if there are any mount options relative
+	 * to the server
+	 */
+	server = strdup(spec);
+	if (server == NULL) {
+		xlog_warn("conf_get_mountops: Unable calloc memory for server");
+		free_all();
+		return mount_opts;
+	}
+	if ((ptr = strchr(server, ':')) != NULL)
+		*ptr='\0';
+	conf_parse_mntopts(NFSMOUNT_SERVER, server, mount_opts);
+	free(server);
+
+	/*
+	 * Finally process all the global mount options.
+	 */
+	conf_parse_mntopts(NFSMOUNT_GLOBAL_OPTS, NULL, mount_opts);
+
+	/*
+	 * If no mount options were found in the configuration file
+	 * just return what was passed in .
+	 */
+	if (SLIST_EMPTY(&head))
+		return mount_opts;
+
+	/*
+	 * Found options in the configuration file. So
+	 * concatenate the configuration options with the
+	 * options that were passed in
+	 */
+	if (mount_opts)
+		optlen = strlen(mount_opts);
+
+	/* list_size + optlen + ',' + '\0' */
+	config_opts = calloc(1, (list_size+optlen+2));
+	if (server == NULL) {
+		xlog_warn("conf_get_mountops: Unable calloc memory for  

config_opts");

utils/mount/configfile.c new file +9 -0
+		free_all();
+		return mount_opts;
+	}
+	if (mount_opts) {
+		strcpy(config_opts, mount_opts);
+		strcat(config_opts, ",");
+	}
+	SLIST_FOREACH(entry, &head, entries) {
+		strcat(config_opts, entry->opt);

utils/mount/configfile.c line 317

Quoted 10 lines
utils/mount/configfile.c new file +10 -0
+		strcat(config_opts, ",");
+	}
+	*(strrchr(config_opts, ',')) = '\0';
+
+	free_all();
+	if (mount_opts)
+		free(mount_opts);
+
+	return config_opts;
+}

Seems to me the text-based mount option parser routines (parse_opt.[ch]) already does a lot of this. It can break up a string into a linked list of options, handle quoted commas properly, catenate options to the list, and flatten the list back into a C string.

Wouldn't it be easier to adapt that code rather than adding new code that does nearly the same thing? It would save you a lot of C string manipulation, and reuse working code.

--
Chuck Lever
chuck[dot]lever[at]oracle[dot]com

#5 lore raw
In reply to Steve Dickson
Quoted 18 lines · Steve Dickson

commit 3d08862cfebb9fb8a360d362bb9e5e761e6b1fb5

Author: Steve Dickson <[email protected]>
Date:   Wed Aug 5 15:53:36 2009 -0400

Make Section names case-insensitive which should help in locating them resulting in make the config files a bit less error prone

support/nfs/conffile.c +0 -0
index 5f491eb..a8b8037 100644
@@ -116,6 +116,18 @@ conf_hash(char *s)
 }
 
 /*

support/nfs/conffile.c conf_hash(char *s) · line 128

Quoted 10 lines
support/nfs/conffile.c +10 -0
+ * Convert letter from upper case to lower case
+ */
+static inline void upper2lower(char *str)
+{
+	char *ptr = str;
+
+	while (*ptr) 
+		*ptr++ = tolower(*ptr);
+}
+

nit: to optimize this function a tiny bit you can also do:

static inline void upper2lower(char *str)

{
	char c;

	while ((c = tolower(*str)))
		*str++ = c;
}

Benny

Quoted 20 lines
support/nfs/conffile.c +5 -0
+
+/*
  * Insert a tag-value combination from LINE (the equal sign is at POS)
  */
 static int
@@ -654,6 +666,9 @@ conf_set(int transaction, char *section, char *tag,
 		xlog_warn("conf_set: strdup(\"%s\") failed", section);
 		goto fail;
 	}
+	/* Make Section names case-insensitive */
+	upper2lower(node->section);
+
 	node->tag = strdup(tag);
 	if (!node->tag) {
 		xlog_warn("conf_set: strdup(\"%s\") failed", tag);

_______________________________________________
NFSv4 mailing list
[email protected]
http://linux-nfs.org/cgi-bin/mailman/listinfo/nfsv4

#2 lore raw
In reply to Steve Dickson

On Aug. 06, 2009, 21:40 +0300, Steve Dickson <[email protected]> wrote:
<snip>

Quoted 45 lines
(quoted diff) +45 -0
+/*
+ * Parse the line LINE of SZ bytes.  Skip Comments, recognize section
+ * headers and feed tag-value pairs into our configuration database.
+ */
+static void
+conf_parse_line(int trans, char *line, size_t sz)
+{
+	char *val;
+	size_t i;
+	int j;
+	static char *section = 0;
+	static int ln = 0;
+
+	/* Lines starting with '#' or ';' are comments.  */
+	ln++;
+	if (*line == '#' || *line == ';')
+		return;
+
+	/* '[section]' parsing...  */
+	if (*line == '[') {
+		for (i = 1; i < sz; i++)
+			if (line[i] == ']')
+				break;
+		if (section)
+			free (section);
+		if (i == sz) {
+			xlog_warn("conf_parse_line: %d:"
+ 				"non-matched ']', ignoring until next section", ln);
+			section = 0;
+			return;
+		}
+		section = malloc(i);
+		if (!section) {
+			xlog_warn("conf_parse_line: %d: malloc (%lu) failed", ln,
+						(unsigned long)i);
+			return;
+		}
+		strlcpy(section, line + 1, i);
+		return;
+	}
+
+	/* Deal with assignments.  */
+	for (i = 0; i < sz; i++) {
+		if (line[i] == '=') {
+			/* If no section, we are ignoring the lines.  */

Review

Quoted 10 lines
(quoted diff) +10 -0
+			if (!section) {
+				xlog_warn("conf_parse_line: %d: ignoring line due to no section", 
+					ln);
+				return;
+			}
+			line[strcspn (line, " \t=")] = '\0';
+			val = line + i + 1 + strspn (line + i + 1, " \t");
+			/* Skip trailing whitespace, if any */
+			for (j = sz - (val - line) - 1; j > 0 && isspace(val[j]); j--)
+				val[j] = '\0';

Should we break on the first non space?
This will allow spaces in the value...
Should we skip trailing comments as well (';' in particular)? I.e.:

			/* Skip trailing comments, if any */
			for (j = 0; j < sz - (val - line); j++) {
				if (val[j] == '#' || val[j] == ';') {
					val[j] = '\0';
					break;
				}
			}
			/* Skip trailing whitespace, if any */
			for (j--; j > 0; j--) {
				if (isspace(val[j]))
					val[j] = '\0';
				else
					break;
			}

Benny

Quoted 13 lines
(quoted diff) +13 -0
+			/* XXX Perhaps should we not ignore errors?  */
+			conf_set(trans, section, line, val, 0, 0);
+			return;
+		}
+	}
+	/* Other non-empty lines are weird.  */
+	i = strspn(line, " \t");
+	if (line[i])
+		xlog_warn("conf_parse_line: %d: syntax error", ln);
+
+	return;
+}
+
#13 lore raw
In reply to a message not in the archive
Quoted 27 lines · Steve Dickson

commit f6f4d0b872c01eaffbcb4c3919f13237aa8678e1

Author: Steve Dickson <[email protected]>
Date:   Mon Mar 9 13:55:25 2009 -0400

Taught conf_parse_line() to ignore spaces in the
'[section]' parsing and before the assignment statements

support/nfs/conffile.c +0 -5
index c5f9fa7..5f491eb 100644
@@ -50,11 +50,6 @@
 #include "xlog.h"
 
 static void conf_load_defaults (int);
-#if 0
-static int conf_find_trans_xf (int, char *);
-#endif
-
-size_t  strlcpy(char *, const char *, size_t);
 
 struct conf_trans {
 	TAILQ_ENTRY (conf_trans) link;
@@ -219,26 +214,48 @@ conf_parse_line(int trans, char *line, size_t sz)
 	if (*line == '#' || *line == ';')

support/nfs/conffile.c conf_parse_line(int trans, char *line, size_t sz) · line 224

Quoted 10 lines
support/nfs/conffile.c +8 -0
 		return;
 
+	/* Ignore blank lines */
+	if (*line == '\0')
+		return;
+
+	/* Strip off any leading blanks */
+	while (isblank(*line)) 
+		line++;
+

Why not do this before looking for '#' or ';'?

Benny

Quoted 46 lines
support/nfs/conffile.c +18 -4
 	/* '[section]' parsing...  */
 	if (*line == '[') {
-		for (i = 1; i < sz; i++)
-			if (line[i] == ']')
+		line++;
+		/* Strip off any blanks after '[' */
+		while (isblank(*line)) 
+			line++;
+
+		for (i = 0; i < sz; i++) {
+			if (line[i] == ']') {
 				break;
+			}
+		}
 		if (section)
-			free (section);
+			free(section);
 		if (i == sz) {
 			xlog_warn("conf_parse_line: %d:"
  				"non-matched ']', ignoring until next section", ln);
 			section = 0;
 			return;
 		}
+		/* Strip off any blanks before ']' */
+		val = line;
+		while (*val && !isblank(*val)) 
+			val++, j++;
+		if (*val)
+			i = j;
+
 		section = malloc(i);
 		if (!section) {
 			xlog_warn("conf_parse_line: %d: malloc (%lu) failed", ln,
 						(unsigned long)i);
 			return;
 		}
-		strlcpy(section, line + 1, i);
+		strncpy(section, line, i);
 		return;
 	}
 

_______________________________________________
NFSv4 mailing list
[email protected]
http://linux-nfs.org/cgi-bin/mailman/listinfo/nfsv4

#3 lore raw
In reply to Benny Halevy
Quoted 55 lines · Benny Halevy

On Aug. 06, 2009, 21:40 +0300, Steve Dickson <[email protected]> wrote:
<snip>

Quoted 51 lines
(quoted diff) +51 -0
+/*
+ * Parse the line LINE of SZ bytes.  Skip Comments, recognize section
+ * headers and feed tag-value pairs into our configuration database.
+ */
+static void
+conf_parse_line(int trans, char *line, size_t sz)
+{
+	char *val;
+	size_t i;
+	int j;
+	static char *section = 0;
+	static int ln = 0;
+
+	/* Lines starting with '#' or ';' are comments.  */
+	ln++;
+	if (*line == '#' || *line == ';')
+		return;
+
+	/* '[section]' parsing...  */
+	if (*line == '[') {
+		for (i = 1; i < sz; i++)
+			if (line[i] == ']')
+				break;
+		if (section)
+			free (section);
+		if (i == sz) {
+			xlog_warn("conf_parse_line: %d:"
+ 				"non-matched ']', ignoring until next section", ln);
+			section = 0;
+			return;
+		}
+		section = malloc(i);
+		if (!section) {
+			xlog_warn("conf_parse_line: %d: malloc (%lu) failed", ln,
+						(unsigned long)i);
+			return;
+		}
+		strlcpy(section, line + 1, i);
+		return;
+	}
+
+	/* Deal with assignments.  */
+	for (i = 0; i < sz; i++) {
+		if (line[i] == '=') {
+			/* If no section, we are ignoring the lines.  */
+			if (!section) {
+				xlog_warn("conf_parse_line: %d: ignoring line due to no section", 
+					ln);
+				return;
+			}
+			line[strcspn (line, " \t=")] = '\0';
Quoted 8 lines

Review

Quoted 4 lines
(quoted diff) +4 -0
+			val = line + i + 1 + strspn (line + i + 1, " \t");
+			/* Skip trailing whitespace, if any */
+			for (j = sz - (val - line) - 1; j > 0 && isspace(val[j]); j--)
+				val[j] = '\0';

Should we break on the first non space?
This will allow spaces in the value...
Should we skip trailing comments as well (';' in particular)? I.e.:

Well to be honest I never looked a this code all that closely... I just moved it from one place to another.. ;-)

Quoted 15 lines
			/* Skip trailing comments, if any */
			for (j = 0; j < sz - (val - line); j++) {
				if (val[j] == '#' || val[j] == ';') {
					val[j] = '\0';
					break;
				}
			}
			/* Skip trailing whitespace, if any */
			for (j--; j > 0; j--) {
				if (isspace(val[j]))
					val[j] = '\0';
				else
					break;
			}

Well since the idmapd.conf man page never talks about comments, it not clear that in-line or trailing comments are supported. Remember my goal with this code was just to reuse it. I really had no intention on improving it any of this code. But with that said...

If in-line or trailing comments are needed for this configuration or other configuration, such the pnfs exports, then yes I would say its a good idea... but would rather deal with afterwords once deemed needed...

steved.

#14 lore raw
In reply to Benny Halevy
Quoted 30 lines · Benny Halevy
Quoted 29 lines · Steve Dickson

commit f6f4d0b872c01eaffbcb4c3919f13237aa8678e1

Author: Steve Dickson <[email protected]>
Date:   Mon Mar 9 13:55:25 2009 -0400

Taught conf_parse_line() to ignore spaces in the
'[section]' parsing and before the assignment statements

support/nfs/conffile.c +0 -5
index c5f9fa7..5f491eb 100644
@@ -50,11 +50,6 @@
 #include "xlog.h"
 
 static void conf_load_defaults (int);
-#if 0
-static int conf_find_trans_xf (int, char *);
-#endif
-
-size_t  strlcpy(char *, const char *, size_t);
 
 struct conf_trans {
 	TAILQ_ENTRY (conf_trans) link;
@@ -219,26 +214,48 @@ conf_parse_line(int trans, char *line, size_t sz)
 	if (*line == '#' || *line == ';')
 		return;
 
Quoted 10 lines

support/nfs/conffile.c conf_parse_line(int trans, char *line, size_t sz) · line 224

Quoted 8 lines
support/nfs/conffile.c +8 -0
+	/* Ignore blank lines */
+	if (*line == '\0')
+		return;
+
+	/* Strip off any leading blanks */
+	while (isblank(*line)) 
+		line++;
+

Why not do this before looking for '#' or ';'?

Point, if we supported in-line comments or am I missing something?

steved.

#6 lore raw
In reply to Benny Halevy
Quoted 32 lines · Benny Halevy
Quoted 18 lines · Steve Dickson

commit 3d08862cfebb9fb8a360d362bb9e5e761e6b1fb5

Author: Steve Dickson <[email protected]>
Date:   Wed Aug 5 15:53:36 2009 -0400

Make Section names case-insensitive which should help in locating them resulting in make the config files a bit less error prone

support/nfs/conffile.c +0 -0
index 5f491eb..a8b8037 100644
@@ -116,6 +116,18 @@ conf_hash(char *s)
 }
 
 /*

support/nfs/conffile.c conf_hash(char *s) · line 128

Quoted 10 lines
support/nfs/conffile.c +10 -0
+ * Convert letter from upper case to lower case
+ */
+static inline void upper2lower(char *str)
+{
+	char *ptr = str;
+
+	while (*ptr) 
+		*ptr++ = tolower(*ptr);
+}
+

nit: to optimize this function a tiny bit you can also do:

Quoted 7 lines

static inline void upper2lower(char *str)

{
	char c;

	while ((c = tolower(*str)))
		*str++ = c;
}

Point. I'll convert this during the commit or next re-spin...

steved.

#25 lore raw
In reply to Chuck Lever
Quoted 3 lines · Chuck Lever

How come the short descriptions (Subject:) for all of these patches are identical?

Because that is the easiest way, plus when when searching for the thread in mail archives, all of the patches show up...

steved.

#21 lore raw
In reply to Chuck Lever
Quoted 5 lines · Chuck Lever

Seems to me the text-based mount option parser routines (parse_opt.[ch]) already does a lot of this. It can break up a string into a linked list of options, handle quoted commas properly, catenate options to the list, and flatten the list back into a C string.

Well I patterned the code after the file parsing code in idmap daemon which means there a common theme between both the idmap configuration file and the mount configuration. I think that is important.

Quoted 4 lines

Wouldn't it be easier to adapt that code rather than adding new code that does nearly the same thing? It would save you a lot of C string manipulation, and reuse working code.

At this point, no. and I am reuse a lot of code...

steved.

#7 lore raw
In reply to Benny Halevy
Quoted 32 lines · Benny Halevy
Quoted 18 lines · Steve Dickson

commit 3d08862cfebb9fb8a360d362bb9e5e761e6b1fb5

Author: Steve Dickson <[email protected]>
Date:   Wed Aug 5 15:53:36 2009 -0400

Make Section names case-insensitive which should help in locating them resulting in make the config files a bit less error prone

support/nfs/conffile.c +0 -0
index 5f491eb..a8b8037 100644
@@ -116,6 +116,18 @@ conf_hash(char *s)
 }
 
 /*

support/nfs/conffile.c conf_hash(char *s) · line 128

Quoted 10 lines
support/nfs/conffile.c +10 -0
+ * Convert letter from upper case to lower case
+ */
+static inline void upper2lower(char *str)
+{
+	char *ptr = str;
+
+	while (*ptr) 
+		*ptr++ = tolower(*ptr);
+}
+

nit: to optimize this function a tiny bit you can also do:

Quoted 8 lines

static inline void upper2lower(char *str)

{
	char c;

	while ((c = tolower(*str)))
		*str++ = c;
}

Here is the update to Patch 10/10 which fixes this nit.

commit d4d2a8a4af44c057d1bd89ea94bce7ce17bfd0a5

Author: Steve Dickson <[email protected]>
Date:   Fri Aug 7 14:34:42 2009 -0400

Now that only the Section names are case-insensitive the mount code has to make sure the the mount options given to the kernel are in the correct case.

Fixed a couple of warnings on #ifndefs

support/include/conffile.h +10 -0
index b263581..132a149 100644
@@ -64,4 +64,14 @@ extern int      conf_remove(int, char *, char *);
 extern int      conf_remove_section(int, char *);
 extern void     conf_report(void);
 
+/*
+ * Convert letter from upper case to lower case
+ */
+static inline void upper2lower(char *str)
+{
+	char c;
+
+	while ((c = tolower(*str)))
+		*str++ = c;
+}
 #endif				/* _CONFFILE_H_ */
support/nfs/conffile.c +0 -12
index 97dc88a..b19b739 100644
@@ -120,18 +120,6 @@ conf_hash(char *s)
 }
 
 /*
- * Convert letter from upper case to lower case
- */
-static inline void upper2lower(char *str)
-{
-	char *ptr = str;
-
-	while (*ptr) 
-		*ptr++ = tolower(*ptr);
-}
-
-
-/*
  * Insert a tag-value combination from LINE (the equal sign is at POS)
  */
 static int
utils/mount/configfile.c +6 -3
index cad8c52..e347b0e 100644
@@ -37,11 +37,11 @@
 #define NFSMOUNT_GLOBAL_OPTS "NFSMount_Global_Options"
 #endif
 
-#ifndef NFSMOUNT_MOUNTPOINT  "MountPoint"
+#ifndef NFSMOUNT_MOUNTPOINT
 #define NFSMOUNT_MOUNTPOINT "MountPoint"
 #endif
 
-#ifndef NFSMOUNT_SERVER "Server"
+#ifndef NFSMOUNT_SERVER
 #define NFSMOUNT_SERVER "Server"
 #endif
 
@@ -83,6 +83,9 @@ char *mountopts_alias(char *opt, int *argtype)
 		*argtype = mnt_alias_tab[i].argtype;
 		return mnt_alias_tab[i].opt;
 	}
+	/* Make option names case-insensitive */
+	upper2lower(opt);
+
 	return opt;
 }
 /*
@@ -202,7 +205,7 @@ conf_parse_mntopts(char *section, char *arg, char *opts)
 		 * Do not overwrite options if already exists 
 		 */
 		snprintf(buf, BUFSIZ, "%s=", node->field);
-		if (opts && strstr(opts, buf) != NULL)
+		if (opts && strcasestr(opts, buf) != NULL)
 			continue;
 		if (lookup_entry(node->field) != NULL)
 			continue;
#26 lore raw
In reply to Chuck Lever
Quoted 46 lines · Chuck Lever
Quoted 14 lines · Steve Dickson

commit eab66bd02db90965d1cbf4e100a274a4e3e6e29e

Author: Steve Dickson <[email protected]>
Date:   Sun Aug 2 12:37:19 2009 -0400

Added hooks to the mount command that allow mount options to be set in a configuration file

utils/mount/mount.c +0 -0
index a668cd9..30d087e 100644

utils/mount/mount.c line 52

Quoted 6 lines
utils/mount/mount.c +3 -0
@@ -47,6 +47,11 @@
 #include "stropts.h"
 #include "version.h"
 
+#ifdef MOUNT_CONFIG
+#include "conffile.h"
+extern char *conf_get_mntopts(char *, char *, char *);

Can this forward declaration be added to conffile.h ?

Quoted 6 lines
utils/mount/mount.c +2 -0
+#endif
+
 char *progname;
 int nfs_mount_data_version;
 int nomtab;

utils/mount/mount.c int main(int argc, char *argv[]) · line 487

Quoted 9 lines
utils/mount/mount.c +6 -0
@@ -474,6 +479,13 @@ int main(int argc, char *argv[])
    spec = argv[1];
    mount_point = argv[2];
 
+#ifdef MOUNT_CONFIG
+    /*
+     * Read the the default mount options
+     */
+    conf_init();
+#endif

It would be cleaner if the #ifdefs were moved to conf_init() (and above, for the #include, and below, into conf_get_mntopts()). If MOUNT_CONFIG isn't set, then configfile.o would just contain stubs, but it would then always be built.

Quoted 3 lines

Otherwise, we end up with each new feature adding #ifdefs in the mainline code, and eventually it becomes unreadable.

I agree... there is the update to this patch:

commit 5225a4e8fbedc5c4f888691855dd3fe2e3eff9ad

Author: Steve Dickson <[email protected]>
Date:   Fri Aug 7 14:29:07 2009 -0400

Added hooks to the mount command that allow mount options to be set in a configuration file

utils/mount/Makefile.am +2 -1
index a1b56ca..db7778f 100644
@@ -15,7 +15,8 @@ mount_nfs_SOURCES = mount.c error.c network.c fstab.c token.c \
 		    nfsumount.c \
 		    mount_constants.h error.h network.h fstab.h token.h \
 		    parse_opt.h parse_dev.h \
-		    nfs4_mount.h nfs_mount4.h stropts.h version.h
+		    nfs4_mount.h nfs_mount4.h stropts.h version.h \
+			mount_config.h
 
 if MOUNT_CONFIG
 mount_nfs_SOURCES += configfile.c
utils/mount/mount.c +7 -0
index a668cd9..909fedf 100644
@@ -37,6 +37,7 @@
 #include "xcommon.h"
 #include "nls.h"
 #include "mount_constants.h"
+#include "mount_config.h"
 #include "nfs_paths.h"
 #include "nfs_mntent.h"
 
@@ -474,6 +475,8 @@ int main(int argc, char *argv[])
 	spec = argv[1];
 	mount_point = argv[2];
 
+	mount_config_init();
+
 	argv[2] = argv[0]; /* so that getopt error messages are correct */
 	while ((c = getopt_long(argc - 2, argv + 2, "rvVwfno:hs",
 				longopts, NULL)) != -1) {
@@ -559,6 +562,10 @@ int main(int argc, char *argv[])
 		mnt_err = EX_USAGE;
 		goto out;
 	}
+	/*
+	 * Concatenate mount options from the configuration file
+	 */
+	mount_opts = mount_config_opts(spec, mount_point, mount_opts);
 
 	parse_opts(mount_opts, &flags, &extra_opts);
 
utils/mount/mount_config.h new file +47 -0

47 lines not on this page · raw message

#16 lore raw
In reply to a message not in the archive
Quoted 41 lines · Steve Dickson
Quoted 30 lines · Benny Halevy
Quoted 29 lines · Steve Dickson

commit f6f4d0b872c01eaffbcb4c3919f13237aa8678e1

Author: Steve Dickson <[email protected]>
Date:   Mon Mar 9 13:55:25 2009 -0400

Taught conf_parse_line() to ignore spaces in the
'[section]' parsing and before the assignment statements

support/nfs/conffile.c +0 -5
index c5f9fa7..5f491eb 100644
@@ -50,11 +50,6 @@
 #include "xlog.h"
 
 static void conf_load_defaults (int);
-#if 0
-static int conf_find_trans_xf (int, char *);
-#endif
-
-size_t  strlcpy(char *, const char *, size_t);
 
 struct conf_trans {
 	TAILQ_ENTRY (conf_trans) link;
@@ -219,26 +214,48 @@ conf_parse_line(int trans, char *line, size_t sz)
 	if (*line == '#' || *line == ';')
 		return;
 
Quoted 9 lines

support/nfs/conffile.c conf_parse_line(int trans, char *line, size_t sz) · line 224

Quoted 8 lines
support/nfs/conffile.c +8 -0
+	/* Ignore blank lines */
+	if (*line == '\0')
+		return;
+
+	/* Strip off any leading blanks */
+	while (isblank(*line)) 
+		line++;
+

Why not do this before looking for '#' or ';'?

Quoted 2 lines

Point, if we supported in-line comments or am I missing something?

Right. This will allow the comment to start after a string of white spaces. It's not the most important feature but will allow more readable config file, I think.

Benny

Quoted 3 lines

steved.

#8 lore raw
In reply to Steve Dickson
Quoted 37 lines · Steve Dickson
Quoted 35 lines · Benny Halevy
Quoted 18 lines · Steve Dickson

commit 3d08862cfebb9fb8a360d362bb9e5e761e6b1fb5

Author: Steve Dickson <[email protected]>
Date:   Wed Aug 5 15:53:36 2009 -0400

Make Section names case-insensitive which should help in locating them resulting in make the config files a bit less error prone

support/nfs/conffile.c +0 -0
index 5f491eb..a8b8037 100644
@@ -116,6 +116,18 @@ conf_hash(char *s)
 }
 
 /*

support/nfs/conffile.c conf_hash(char *s) · line 128

Quoted 10 lines
support/nfs/conffile.c +10 -0
+ * Convert letter from upper case to lower case
+ */
+static inline void upper2lower(char *str)
+{
+	char *ptr = str;
+
+	while (*ptr) 
+		*ptr++ = tolower(*ptr);
+}
+

nit: to optimize this function a tiny bit you can also do:

static inline void upper2lower(char *str)

{
	char c;
Quoted 5 lines
Quoted 4 lines
	while ((c = tolower(*str)))
		*str++ = c;
}

Here is the update to Patch 10/10 which fixes this nit.

Cool. Looks good!

Benny

Quoted 94 lines

commit d4d2a8a4af44c057d1bd89ea94bce7ce17bfd0a5

Author: Steve Dickson <[email protected]>
Date:   Fri Aug 7 14:34:42 2009 -0400

Now that only the Section names are case-insensitive the mount code has to make sure the the mount options given to the kernel are in the correct case.

Fixed a couple of warnings on #ifndefs

support/include/conffile.h +10 -0
index b263581..132a149 100644
@@ -64,4 +64,14 @@ extern int      conf_remove(int, char *, char *);
 extern int      conf_remove_section(int, char *);
 extern void     conf_report(void);
 
+/*
+ * Convert letter from upper case to lower case
+ */
+static inline void upper2lower(char *str)
+{
+	char c;
+
+	while ((c = tolower(*str)))
+		*str++ = c;
+}
 #endif				/* _CONFFILE_H_ */
support/nfs/conffile.c +0 -12
index 97dc88a..b19b739 100644
@@ -120,18 +120,6 @@ conf_hash(char *s)
 }
 
 /*
- * Convert letter from upper case to lower case
- */
-static inline void upper2lower(char *str)
-{
-	char *ptr = str;
-
-	while (*ptr) 
-		*ptr++ = tolower(*ptr);
-}
-
-
-/*
  * Insert a tag-value combination from LINE (the equal sign is at POS)
  */
 static int
utils/mount/configfile.c +6 -3
index cad8c52..e347b0e 100644
@@ -37,11 +37,11 @@
 #define NFSMOUNT_GLOBAL_OPTS "NFSMount_Global_Options"
 #endif
 
-#ifndef NFSMOUNT_MOUNTPOINT  "MountPoint"
+#ifndef NFSMOUNT_MOUNTPOINT
 #define NFSMOUNT_MOUNTPOINT "MountPoint"
 #endif
 
-#ifndef NFSMOUNT_SERVER "Server"
+#ifndef NFSMOUNT_SERVER
 #define NFSMOUNT_SERVER "Server"
 #endif
 
@@ -83,6 +83,9 @@ char *mountopts_alias(char *opt, int *argtype)
 		*argtype = mnt_alias_tab[i].argtype;
 		return mnt_alias_tab[i].opt;
 	}
+	/* Make option names case-insensitive */
+	upper2lower(opt);
+
 	return opt;
 }
 /*
@@ -202,7 +205,7 @@ conf_parse_mntopts(char *section, char *arg, char *opts)
 		 * Do not overwrite options if already exists 
 		 */
 		snprintf(buf, BUFSIZ, "%s=", node->field);
-		if (opts && strstr(opts, buf) != NULL)
+		if (opts && strcasestr(opts, buf) != NULL)
 			continue;
 		if (lookup_entry(node->field) != NULL)
 			continue;
#29 lore raw
In reply to Steve Dickson
Quoted 20 lines · Steve Dickson

Hello,

Here is the latest version of these patches. In the version the following changes were made:

1) Section headers how have an argument to them. Similar to [Server "foobar" ] or [MountPoint "/export"]

2) Only the Section names are now case-less. Its up to the caller of the parsing routines to deal with case sensitivity of the data.

Here are the pointers to the two previous versions which will explain the who, what and whys:

http://marc.info/?l=linux-nfs&m=123663164305546&w=2
http://marc.info/?l=linux-nfs&m=124931114811175&w=2

Quoted 5 lines

This entire patch set is available at:
http://people.redhat.com/steved/mount-conf/ver03/

and on the 'mount_conf-ver03' branch on my experimental git tree:
git://linux-nfs.org/~steved/nfs-utils-exp.git

Committed... Which included the updated patches I posted to this thread as well as Benny's suggestion on supporting inline comments... As usual, he's observations were spot on...

steved.