xfstests: 220 - generic quota sanity
PATCH 1/1 xfstests: 220 - generic quota sanity
Add some very basic quota sanity tests for generic filesystems.
This is based on test 108, but uses the generic quota tools, not xfs_quota, and therefore cannot test project quota.
Also, the IOs are much smaller (48k) so that ext3 won't get into indirect blocks and throw off the accounting. This does assume 4k blocks though.
---
220 new file +123 -0
@@ -0,0 +1,123 @@ +#! /bin/sh +# FS QA Test No. 220 +# +# Simple quota accounting test for direct/buffered/mmap IO. +# +#----------------------------------------------------------------------- +# Copyright (c) 2009 Eric Sandeen. All Rights Reserved. +# +# Based on test 108, +# Copyright (c) 2005 Silicon Graphics, Inc. All Rights Reserved. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation. +# +# This program is distributed in the hope that it would be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write the Free Software Foundation, +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +# +#----------------------------------------------------------------------- +# +# creator [email protected] + +seq=`basename $0` +echo "QA output created by $seq" + +here=`pwd` +tmp=/tmp/$$ +status=1 # failure is the default! +trap "rm -f $tmp.*; exit \$status" 0 1 2 3 15 + +# get standard environment, filters and checks +. ./common.rc +. ./common.filter +. ./common.quota + +filter_scratch() +{ + perl -ne " +s,$SCRATCH_MNT,[SCR_MNT],; +s,$SCRATCH_DEV,[SCR_DEV],; + print;" +} + +# real QA test starts here +_supported_fs generic +_supported_os Linux #IRIX +_require_scratch +_require_quota + +test_files() +{ + echo; echo "### create files, setting up ownership (type=$type)" + rm -f $SCRATCH_MNT/{buffer,direct,mmap} + touch $SCRATCH_MNT/{buffer,direct,mmap} + chown $uid $SCRATCH_MNT/{buffer,direct,mmap} + chgrp $gid $SCRATCH_MNT/{buffer,direct,mmap} + for file in $SCRATCH_MNT/{buffer,direct,mmap}; do + $here/src/lstat64 $file | head -3 | filter_scratch + done +} + +test_accounting() +{ + echo "### some controlled buffered, direct and mmapd IO (type=$type)" + echo "--- initiating parallel IO..." >>$seq.full + # Small ios here because ext3 will account for indirect blocks too ... :( + # 48k will fit w/o indirect for 4k blocks (default blocksize) + $XFS_IO_PROG -F -c 'pwrite 0 48k' -c 'fsync' \ + $SCRATCH_MNT/buffer >>$seq.full 2>&1 & + $XFS_IO_PROG -F -c 'pwrite 0 48k' -d \ + $SCRATCH_MNT/direct >>$seq.full 2>&1 & + $XFS_IO_PROG -F -c 't 48k' -c 'mm -rw 0 48k' -c 'mw 0 48k' -c 'ms -s' \ + $SCRATCH_MNT/mmap >>$seq.full 2>&1 & + wait + echo "--- completed parallel IO ($type)" >>$seq.full + + for file in $SCRATCH_MNT/{buffer,direct,mmap}; do + $here/src/lstat64 $file | head -3 | filter_scratch + done + + repquota -$type -s -n $SCRATCH_MNT | grep -v "^#0" | filter_scratch +} + +# real QA test starts here +rm -f $seq.full + +uid=1 +gid=2 + +umount $SCRATCH_DEV 2>/dev/null +_scratch_mkfs >> $seq.full 2>&1 +_scratch_mount "-o usrquota,grpquota" +quotacheck -u -g $SCRATCH_MNT 2>/dev/null +quotaon $SCRATCH_MNT 2>/dev/null +umount $SCRATCH_DEV + +echo; echo "### test user accounting" +export MOUNT_OPTIONS="-o usrquota" +_qmount +quotaon $SCRATCH_MNT 2>/dev/null +type=u +test_files +test_accounting +umount $SCRATCH_DEV 2>/dev/null + +echo; echo "### test group accounting" +export MOUNT_OPTIONS="-o grpquota" +_qmount +quotaon $SCRATCH_MNT 2>/dev/null +type=g +test_files +test_accounting +umount $SCRATCH_DEV 2>/dev/null + +status=0 +exit
220.out new file +63 -0
63 lines not on this page · raw message
common.quota +15 -2
@@ -21,14 +21,27 @@ # # -# checks that the XFS quota support in the kernel is enabled +# checks that the generic quota support in the kernel is enabled # and that we have valid quota user tools installed. # _require_quota() { + [ -x /usr/bin/quota ] || _notrun "Quota user tools not installed" + _scratch_mount "-o usrquota,grpquota" + ret=$? + umount $SCRATCH_MNT + [ $ret -ne 0 ] && _notrun "Installed kernel does not support quota" +} + +# +# checks that the XFS quota support in the kernel is enabled +# and that we have valid quota user tools installed. +# +_require_xfs_quota() +{ src/feature -q $TEST_DEV [ $? -ne 0 ] && _notrun "Installed kernel does not support XFS quota" - [ -x /usr/sbin/xfs_quota ] || _notrun "Quota user tools not installed" + [ -x /usr/sbin/xfs_quota ] || _notrun "XFS quota user tools not installed" } #
group +1 -0
@@ -328,3 +328,4 @@ prealloc 217 log metadata auto 218 auto fsr quick 219 auto +220 auto quota
050 +1 -1
@@ -55,7 +55,7 @@ cp /dev/null $seq.full chmod a+rwx $seq.full # arbitrary users will write here _require_scratch -_require_quota +_require_xfs_quota bsoft=100 bhard=500
052 +1 -1
@@ -54,7 +54,7 @@ _supported_os IRIX Linux rm -f $seq.full _require_scratch -_require_quota +_require_xfs_quota _require_nobody # setup a default run
054 +1 -1
@@ -52,7 +52,7 @@ cp /dev/null $seq.full chmod ugo+rwx $seq.full _require_scratch -_require_quota +_require_xfs_quota _filter_stat() {
081 +1 -1
@@ -54,7 +54,7 @@ trap "_cleanup; exit \$status" 0 1 2 3 15 # prelim rm -f $seq.full $tmp.* _require_scratch -_require_quota +_require_xfs_quota _require_v2log echo "*** init FS"
106 +1 -1
@@ -42,7 +42,7 @@ trap "rm -f $tmp.*; exit \$status" 0 1 2 3 15 _supported_fs xfs _supported_os Linux #IRIX _require_scratch -_require_quota +_require_xfs_quota _require_prjquota # real QA test starts here
107 +1 -1
@@ -54,7 +54,7 @@ s/Inode: \#\d+ \(\d+ blocks, \d+ extents\)/Inode: #[INO] (X blocks, Y extents)/; _supported_fs xfs _supported_os Linux #IRIX _require_scratch -_require_quota +_require_xfs_quota _require_prjquota # real QA test starts here
108 +1 -1
@@ -49,7 +49,7 @@ s,$SCRATCH_DEV,[SCR_DEV],; _supported_fs xfs _supported_os Linux #IRIX _require_scratch -_require_quota +_require_xfs_quota _require_prjquota test_files()
116 +1 -1
@@ -51,7 +51,7 @@ _supported_fs xfs _supported_os IRIX Linux _require_scratch -_require_quota +_require_xfs_quota mkfs.xfs -f $SCRATCH_DEV >/dev/null 2>&1 mount -o uquota $SCRATCH_DEV $SCRATCH_MNT
118 +1 -1
@@ -52,7 +52,7 @@ _supported_fs xfs _supported_os IRIX Linux _require_scratch -_require_quota +_require_xfs_quota _chowning_file() {
134 +1 -1
@@ -50,7 +50,7 @@ _cleanup() _supported_fs xfs _supported_os Linux IRIX -_require_quota +_require_xfs_quota dir=$SCRATCH_MNT/project
196 +1 -1
@@ -51,7 +51,7 @@ _supported_fs xfs _supported_os Linux _require_scratch -_require_quota +_require_xfs_quota # # Setup temporary replacements for /etc/projects and /etc/projid
_______________________________________________
xfs mailing list
[email protected]
http://oss.sgi.com/mailman/listinfo/xfs
This looks good Eric.
Is this test just for quota accounting or should it be testing quota enforcement too?
Lachlan
Quoted 414 lines · ----- "Eric Sandeen
Add some very basic quota sanity tests for generic filesystems.
This is based on test 108, but uses the generic quota tools, not
xfs_quota, and therefore cannot test project quota.Also, the IOs are much smaller (48k) so that ext3 won't get into indirect blocks and throw off the accounting. This does assume 4k blocks though.
Signed-off-by Eric Sandeen <[email protected]>---
220 new file +22
-0@@ -0,0 +1,123 @@ +#! /bin/sh +# FS QA Test No. 220 +# +# Simple quota accounting test for direct/buffered/mmap IO. +# +#----------------------------------------------------------------------- +# Copyright (c) 2009 Eric Sandeen. All Rights Reserved. +# +# Based on test 108, +# Copyright (c) 2005 Silicon Graphics, Inc. All Rights Reserved. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation. +# +# This program is distributed in the hope that it would be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write the Free SoftwareFoundation,
220 new file +49
-0+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +# +#----------------------------------------------------------------------- +# +# creator [email protected] + +seq=`basename $0` +echo "QA output created by $seq" + +here=`pwd` +tmp=/tmp/$$ +status=1 # failure is the default! +trap "rm -f $tmp.*; exit \$status" 0 1 2 3 15 + +# get standard environment, filters and checks +. ./common.rc +. ./common.filter +. ./common.quota + +filter_scratch() +{ + perl -ne " +s,$SCRATCH_MNT,[SCR_MNT],; +s,$SCRATCH_DEV,[SCR_DEV],; + print;" +} + +# real QA test starts here +_supported_fs generic +_supported_os Linux #IRIX +_require_scratch +_require_quota + +test_files() +{ + echo; echo "### create files, setting up ownership (type=$type)" + rm -f $SCRATCH_MNT/{buffer,direct,mmap} + touch $SCRATCH_MNT/{buffer,direct,mmap} + chown $uid $SCRATCH_MNT/{buffer,direct,mmap} + chgrp $gid $SCRATCH_MNT/{buffer,direct,mmap} + for file in $SCRATCH_MNT/{buffer,direct,mmap}; do + $here/src/lstat64 $file | head -3 | filter_scratch + done +} + +test_accounting() +{ + echo "### some controlled buffered, direct and mmapd IO(type=$type)"
220 new file +2
-0+ echo "--- initiating parallel IO..." >>$seq.full + # Small ios here because ext3 will account for indirect blocks too... :(
220 new file +15
-1+ # 48k will fit w/o indirect for 4k blocks (default blocksize) + $XFS_IO_PROG -F -c 'pwrite 0 48k' -c 'fsync' \ + $SCRATCH_MNT/buffer >>$seq.full 2>&1 & + $XFS_IO_PROG -F -c 'pwrite 0 48k' -d \ + $SCRATCH_MNT/direct >>$seq.full 2>&1 & + $XFS_IO_PROG -F -c 't 48k' -c 'mm -rw 0 48k' -c 'mw 0 48k' -c 'ms -s' \ + $SCRATCH_MNT/mmap >>$seq.full 2>&1 & + wait + echo "--- completed parallel IO ($type)" >>$seq.full + + for file in $SCRATCH_MNT/{buffer,direct,mmap}; do + $here/src/lstat64 $file | head -3 | filter_scratch + done + + repquota -$type -s -n $SCRATCH_MNT | grep -v "^#0" |
filter_scratch220 new file +35
-0+} + +# real QA test starts here +rm -f $seq.full + +uid=1 +gid=2 + +umount $SCRATCH_DEV 2>/dev/null +_scratch_mkfs >> $seq.full 2>&1 +_scratch_mount "-o usrquota,grpquota" +quotacheck -u -g $SCRATCH_MNT 2>/dev/null +quotaon $SCRATCH_MNT 2>/dev/null +umount $SCRATCH_DEV + +echo; echo "### test user accounting" +export MOUNT_OPTIONS="-o usrquota" +_qmount +quotaon $SCRATCH_MNT 2>/dev/null +type=u +test_files +test_accounting +umount $SCRATCH_DEV 2>/dev/null + +echo; echo "### test group accounting" +export MOUNT_OPTIONS="-o grpquota" +_qmount +quotaon $SCRATCH_MNT 2>/dev/null +type=g +test_files +test_accounting +umount $SCRATCH_DEV 2>/dev/null + +status=0 +exit220.out new file +28
-0@@ -0,0 +1,63 @@ +QA output created by 220 + +### test user accounting + +### create files, setting up ownership (type=u) + File: "[SCR_MNT]/buffer" + Size: 0 Filetype: Regular File + Mode: (0644/-rw-r--r--) Uid: (1) Gid: (2) + File: "[SCR_MNT]/direct" + Size: 0 Filetype: Regular File + Mode: (0644/-rw-r--r--) Uid: (1) Gid: (2) + File: "[SCR_MNT]/mmap" + Size: 0 Filetype: Regular File + Mode: (0644/-rw-r--r--) Uid: (1) Gid: (2) +### some controlled buffered, direct and mmapd IO (type=u) + File: "[SCR_MNT]/buffer" + Size: 53248 Filetype: Regular File + Mode: (0644/-rw-r--r--) Uid: (1) Gid: (2) + File: "[SCR_MNT]/direct" + Size: 53248 Filetype: Regular File + Mode: (0644/-rw-r--r--) Uid: (1) Gid: (2) + File: "[SCR_MNT]/mmap" + Size: 53248 Filetype: Regular File + Mode: (0644/-rw-r--r--) Uid: (1) Gid: (2) +*** Report for user quotas on device [SCR_DEV] +Block grace time: 7days; Inode grace time: 7days + Block limits File limits +User used soft hard grace used soft hardgrace
+----------------------------------------------------------------------220.out new file +30
-0+#1 -- 168 0 0 3 0 0 + + + +### test group accounting + +### create files, setting up ownership (type=g) + File: "[SCR_MNT]/buffer" + Size: 0 Filetype: Regular File + Mode: (0644/-rw-r--r--) Uid: (1) Gid: (2) + File: "[SCR_MNT]/direct" + Size: 0 Filetype: Regular File + Mode: (0644/-rw-r--r--) Uid: (1) Gid: (2) + File: "[SCR_MNT]/mmap" + Size: 0 Filetype: Regular File + Mode: (0644/-rw-r--r--) Uid: (1) Gid: (2) +### some controlled buffered, direct and mmapd IO (type=g) + File: "[SCR_MNT]/buffer" + Size: 53248 Filetype: Regular File + Mode: (0644/-rw-r--r--) Uid: (1) Gid: (2) + File: "[SCR_MNT]/direct" + Size: 53248 Filetype: Regular File + Mode: (0644/-rw-r--r--) Uid: (1) Gid: (2) + File: "[SCR_MNT]/mmap" + Size: 53248 Filetype: Regular File + Mode: (0644/-rw-r--r--) Uid: (1) Gid: (2) +*** Report for group quotas on device [SCR_DEV] +Block grace time: 7days; Inode grace time: 7days + Block limits File limits +Group used soft hard grace used soft hardgrace
+----------------------------------------------------------------------220.out new file +3
-0+#2 -- 168 0 0 3 0 0 + +common.quota +2
-1@@ -21,14 +21,27 @@ # # -# checks that the XFS quota support in the kernel is enabled +# checks that the generic quota support in the kernel is enabled # and that we have valid quota user tools installed. # _require_quota() { + [ -x /usr/bin/quota ] || _notrun "Quota user tools notinstalled"
common.quota +4
-0+ _scratch_mount "-o usrquota,grpquota" + ret=$? + umount $SCRATCH_MNT + [ $ret -ne 0 ] && _notrun "Installed kernel does not supportquota"
common.quota +8
-0+} + +# +# checks that the XFS quota support in the kernel is enabled +# and that we have valid quota user tools installed. +# +_require_xfs_quota() +{ src/feature -q $TEST_DEV [ $? -ne 0 ] && _notrun "Installed kernel does not support XFSquota"
- [ -x/usr/sbin/xfs_quota] ||_notrun"Quota user tools not
installed"
+ [ -x/usr/sbin/xfs_quota] ||_notrun"XFS quota user tools not
installed"
}#
group +1
-0@@ -328,3 +328,4 @@ prealloc 217 log metadata auto 218 auto fsr quick 219 auto +220 auto quota050 +1
-1@@ -55,7 +55,7 @@ cp /dev/null $seq.full chmod a+rwx $seq.full # arbitrary users will write here _require_scratch -_require_quota +_require_xfs_quota bsoft=100 bhard=500052 +1
-1@@ -54,7 +54,7 @@ _supported_os IRIX Linux rm -f $seq.full _require_scratch -_require_quota +_require_xfs_quota _require_nobody # setup a default run054 +1
-1@@ -52,7 +52,7 @@ cp /dev/null $seq.full chmod ugo+rwx $seq.full _require_scratch -_require_quota +_require_xfs_quota _filter_stat() {081 +1
-1@@ -54,7 +54,7 @@ trap "_cleanup; exit \$status" 0 1 2 3 15 # prelim rm -f $seq.full $tmp.* _require_scratch -_require_quota +_require_xfs_quota _require_v2log echo "*** init FS"106 +1
-1@@ -42,7 +42,7 @@ trap "rm -f $tmp.*; exit \$status" 0 1 2 3 15 _supported_fs xfs _supported_os Linux #IRIX _require_scratch -_require_quota +_require_xfs_quota _require_prjquota # real QA test starts here107 +1
-1@@ -54,7 +54,7 @@ s/Inode: \#\d+ \(\d+ blocks, \d+ extents\)/Inode: #[INO] (X blocks, Y extents)/; _supported_fs xfs _supported_os Linux #IRIX _require_scratch -_require_quota +_require_xfs_quota _require_prjquota# real QA test starts here108 +1
-1@@ -49,7 +49,7 @@ s,$SCRATCH_DEV,[SCR_DEV],; _supported_fs xfs _supported_os Linux #IRIX _require_scratch -_require_quota +_require_xfs_quota _require_prjquota test_files()116 +1
-1@@ -51,7 +51,7 @@ _supported_fs xfs _supported_os IRIX Linux _require_scratch -_require_quota +_require_xfs_quota mkfs.xfs -f $SCRATCH_DEV >/dev/null 2>&1 mount -o uquota $SCRATCH_DEV $SCRATCH_MNT118 +1
-1@@ -52,7 +52,7 @@ _supported_fs xfs _supported_os IRIX Linux _require_scratch -_require_quota +_require_xfs_quota _chowning_file() {134 +1
-1@@ -50,7 +50,7 @@ _cleanup() _supported_fs xfs _supported_os Linux IRIX -_require_quota +_require_xfs_quota dir=$SCRATCH_MNT/project196 +1
-1@@ -51,7 +51,7 @@ _supported_fs xfs _supported_os Linux _require_scratch -_require_quota +_require_xfs_quota # # Setup temporary replacements for /etc/projects and /etc/projid
Quoted 4 lines
_______________________________________________
xfs mailing list
[email protected]
http://oss.sgi.com/mailman/listinfo/xfs
_______________________________________________
xfs mailing list
[email protected]
http://oss.sgi.com/mailman/listinfo/xfs
Quoted 4 lines · Lachlan McIlroy
This looks good Eric.
Is this test just for quota accounting or should it be testing quota enforcement too?
I guess 108 just did accounting; I was going to keep it parallel, and do a different one for accounting, but it could be added to this as well.
-Eric
Quoted 15 lines
Lachlan
Quoted 11 lines · ----- "Eric Sandeen
Add some very basic quota sanity tests for generic filesystems.
This is based on test 108, but uses the generic quota tools, not
xfs_quota, and therefore cannot test project quota.Also, the IOs are much smaller (48k) so that ext3 won't get into indirect blocks and throw off the accounting. This does assume 4k blocks though.
Signed-off-by Eric Sandeen <[email protected]>---
...
_______________________________________________
xfs mailing list
[email protected]
http://oss.sgi.com/mailman/listinfo/xfs
PATCH v2 1/2 xfstests: split out xfs & generic quota existence tests
In reply to Eric SandeenSplit out xfs & generic quota existence tests
Make a new test to test for generic quota tools, for generic filesystem testing. Move the existing quota test to a new "xfs" name.
---
common.quota +15 -2
@@ -21,14 +21,27 @@ # # -# checks that the XFS quota support in the kernel is enabled +# checks that the generic quota support in the kernel is enabled # and that we have valid quota user tools installed. # _require_quota() { + [ -x /usr/bin/quota ] || _notrun "Quota user tools not installed" + _scratch_mount "-o usrquota,grpquota" + ret=$? + umount $SCRATCH_MNT + [ $ret -ne 0 ] && _notrun "Installed kernel does not support quota" +} + +# +# checks that the XFS quota support in the kernel is enabled +# and that we have valid quota user tools installed. +# +_require_xfs_quota() +{ src/feature -q $TEST_DEV [ $? -ne 0 ] && _notrun "Installed kernel does not support XFS quota" - [ -x /usr/sbin/xfs_quota ] || _notrun "Quota user tools not installed" + [ -x /usr/sbin/xfs_quota ] || _notrun "XFS quota user tools not installed" } #diff --git a/050 b/050
index abb806a..306a7b5 100755
050 +1 -1
@@ -55,7 +55,7 @@ cp /dev/null $seq.full chmod a+rwx $seq.full # arbitrary users will write here _require_scratch -_require_quota +_require_xfs_quota bsoft=100 bhard=500
052 +1 -1
@@ -54,7 +54,7 @@ _supported_os IRIX Linux rm -f $seq.full _require_scratch -_require_quota +_require_xfs_quota _require_nobody # setup a default run
054 +1 -1
@@ -52,7 +52,7 @@ cp /dev/null $seq.full chmod ugo+rwx $seq.full _require_scratch -_require_quota +_require_xfs_quota _filter_stat() {
081 +1 -1
@@ -54,7 +54,7 @@ trap "_cleanup; exit \$status" 0 1 2 3 15 # prelim rm -f $seq.full $tmp.* _require_scratch -_require_quota +_require_xfs_quota _require_v2log echo "*** init FS"
106 +1 -1
@@ -42,7 +42,7 @@ trap "rm -f $tmp.*; exit \$status" 0 1 2 3 15 _supported_fs xfs _supported_os Linux #IRIX _require_scratch -_require_quota +_require_xfs_quota _require_prjquota # real QA test starts here
107 +1 -1
@@ -54,7 +54,7 @@ s/Inode: \#\d+ \(\d+ blocks, \d+ extents\)/Inode: #[INO] (X blocks, Y extents)/; _supported_fs xfs _supported_os Linux #IRIX _require_scratch -_require_quota +_require_xfs_quota _require_prjquota # real QA test starts here
108 +1 -1
@@ -49,7 +49,7 @@ s,$SCRATCH_DEV,[SCR_DEV],; _supported_fs xfs _supported_os Linux #IRIX _require_scratch -_require_quota +_require_xfs_quota _require_prjquota test_files()
116 +1 -1
@@ -51,7 +51,7 @@ _supported_fs xfs _supported_os IRIX Linux _require_scratch -_require_quota +_require_xfs_quota mkfs.xfs -f $SCRATCH_DEV >/dev/null 2>&1 mount -o uquota $SCRATCH_DEV $SCRATCH_MNT
118 +1 -1
@@ -52,7 +52,7 @@ _supported_fs xfs _supported_os IRIX Linux _require_scratch -_require_quota +_require_xfs_quota _chowning_file() {
134 +1 -1
@@ -50,7 +50,7 @@ _cleanup() _supported_fs xfs _supported_os Linux IRIX -_require_quota +_require_xfs_quota dir=$SCRATCH_MNT/project
196 +1 -1
@@ -51,7 +51,7 @@ _supported_fs xfs _supported_os Linux _require_scratch -_require_quota +_require_xfs_quota # # Setup temporary replacements for /etc/projects and /etc/projid
_______________________________________________
xfs mailing list
[email protected]
http://oss.sgi.com/mailman/listinfo/xfs
PATCH v2 2/2 xfstests: 220 - generic quota sanity
In reply to Eric SandeenAdd some very basic quota sanity tests for generic filesystems.
This is based on test 108, but uses the generic quota tools, not xfs_quota, and therefore cannot test project quota.
Also, the IOs are much smaller (48k) so that ext3 won't get into indirect blocks and throw off the accounting. This does assume 4k blocks though.
---
V2: xfs test changes split out, fix 220.out for 12-block IO
220 new file +123 -0
@@ -0,0 +1,123 @@ +#! /bin/sh +# FS QA Test No. 220 +# +# Simple quota accounting test for direct/buffered/mmap IO. +# +#----------------------------------------------------------------------- +# Copyright (c) 2009 Eric Sandeen. All Rights Reserved. +# +# Based on test 108, +# Copyright (c) 2005 Silicon Graphics, Inc. All Rights Reserved. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation. +# +# This program is distributed in the hope that it would be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write the Free Software Foundation, +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +# +#----------------------------------------------------------------------- +# +# creator [email protected] + +seq=`basename $0` +echo "QA output created by $seq" + +here=`pwd` +tmp=/tmp/$$ +status=1 # failure is the default! +trap "rm -f $tmp.*; exit \$status" 0 1 2 3 15 + +# get standard environment, filters and checks +. ./common.rc +. ./common.filter +. ./common.quota + +filter_scratch() +{ + perl -ne " +s,$SCRATCH_MNT,[SCR_MNT],; +s,$SCRATCH_DEV,[SCR_DEV],; + print;" +} + +# real QA test starts here +_supported_fs generic +_supported_os Linux #IRIX +_require_scratch +_require_quota + +test_files() +{ + echo; echo "### create files, setting up ownership (type=$type)" + rm -f $SCRATCH_MNT/{buffer,direct,mmap} + touch $SCRATCH_MNT/{buffer,direct,mmap} + chown $uid $SCRATCH_MNT/{buffer,direct,mmap} + chgrp $gid $SCRATCH_MNT/{buffer,direct,mmap} + for file in $SCRATCH_MNT/{buffer,direct,mmap}; do + $here/src/lstat64 $file | head -3 | filter_scratch + done +} + +test_accounting() +{ + echo "### some controlled buffered, direct and mmapd IO (type=$type)" + echo "--- initiating parallel IO..." >>$seq.full + # Small ios here because ext3 will account for indirect blocks too ... :( + # 48k will fit w/o indirect for 4k blocks (default blocksize) + $XFS_IO_PROG -F -c 'pwrite 0 48k' -c 'fsync' \ + $SCRATCH_MNT/buffer >>$seq.full 2>&1 & + $XFS_IO_PROG -F -c 'pwrite 0 48k' -d \ + $SCRATCH_MNT/direct >>$seq.full 2>&1 & + $XFS_IO_PROG -F -c 't 48k' -c 'mm -rw 0 48k' -c 'mw 0 48k' -c 'ms -s' \ + $SCRATCH_MNT/mmap >>$seq.full 2>&1 & + wait + echo "--- completed parallel IO ($type)" >>$seq.full + + for file in $SCRATCH_MNT/{buffer,direct,mmap}; do + $here/src/lstat64 $file | head -3 | filter_scratch + done + + repquota -$type -s -n $SCRATCH_MNT | grep -v "^#0" | filter_scratch +} + +# real QA test starts here +rm -f $seq.full + +uid=1 +gid=2 + +umount $SCRATCH_DEV 2>/dev/null +_scratch_mkfs >> $seq.full 2>&1 +_scratch_mount "-o usrquota,grpquota" +quotacheck -u -g $SCRATCH_MNT 2>/dev/null +quotaon $SCRATCH_MNT 2>/dev/null +umount $SCRATCH_DEV + +echo; echo "### test user accounting" +export MOUNT_OPTIONS="-o usrquota" +_qmount +quotaon $SCRATCH_MNT 2>/dev/null +type=u +test_files +test_accounting +umount $SCRATCH_DEV 2>/dev/null + +echo; echo "### test group accounting" +export MOUNT_OPTIONS="-o grpquota" +_qmount +quotaon $SCRATCH_MNT 2>/dev/null +type=g +test_files +test_accounting +umount $SCRATCH_DEV 2>/dev/null + +status=0 +exit
220.out new file +63 -0
63 lines not on this page · raw message
group +1 -0
@@ -328,3 +328,4 @@ prealloc 217 log metadata auto 218 auto fsr quick 219 auto +220 auto quota
_______________________________________________
xfs mailing list
[email protected]
http://oss.sgi.com/mailman/listinfo/xfs
Re: [PATCH V2 1/2] xfstests: split out xfs & generic quota existence tests
In reply to Eric SandeenQuoted 5 lines · Eric Sandeen
Split out xfs & generic quota existence tests
Make a new test to test for generic quota tools, for generic filesystem testing. Move the existing quota test to a new "xfs" name.
Looks good,
_______________________________________________
xfs mailing list
[email protected]
http://oss.sgi.com/mailman/listinfo/xfs
Quoted 8 lines · Eric Sandeen
Add some very basic quota sanity tests for generic filesystems.
This is based on test 108, but uses the generic quota tools, not
xfs_quota, and therefore cannot test project quota.Also, the IOs are much smaller (48k) so that ext3 won't get into indirect blocks and throw off the accounting. This does assume 4k blocks though.
Looks good to me and passes at least for XFS.
_______________________________________________
xfs mailing list
[email protected]
http://oss.sgi.com/mailman/listinfo/xfs
Quoted 8 lines · Eric Sandeen
Quoted 4 lines · Lachlan McIlroy
This looks good Eric.
Is this test just for quota accounting or should it be testing quota enforcement too?
I guess 108 just did accounting; I was going to keep it parallel, and do a different one for accounting, but it could be added to this as well.
Yeah, let's use a different one for enforement testing.
_______________________________________________
xfs mailing list
[email protected]
http://oss.sgi.com/mailman/listinfo/xfs
Quoted 6 lines · ----- "Christoph Hellwig
Quoted 4 lines · Eric Sandeen
Quoted 3 lines · Lachlan McIlroy
This looks good Eric.
Is this test just for quota accounting or should it be testing
quota
Quoted 8 lines
Quoted 3 lines
Quoted 1 line
enforcement too?
I guess 108 just did accounting; I was going to keep it parallel,
and do
Quoted 1 line
a different one for accounting, but it could be added to this as
well.
Yeah, let's use a different one for enforement testing.
Agree, if quota enforcement isn't working correctly then the accounting is the first thing to check so having seperate tests is a good idea.
_______________________________________________
xfs mailing list
[email protected]
http://oss.sgi.com/mailman/listinfo/xfs