diseqc 2.0 on stb0899 / pctv452e (TT S2-3xxx and the likes)
Hi All,
This has been addressed before, but I cannot find any specifics on the list or on the net in general regarding.
I'm trying to get a Spaun SAR 411F switch to work with a TT S2-3650. The SAR only talks diseqc 2.0 according to the specs and works perfectly on an Nexus-S setup. When I try to scan through the switch using the S2-3650 (old dvbscan or the new scan-s2 utility) nothing happens (tuning status == 0x00), whilst a direct connection /without the switch/ pose no problem at all.
When I go through the s2-liplianin dvb drivers I noticed the DiSEqC 2.0 freq marker in the stb0899_priv.h header file. Also according to the STB0899 datasheet DiSEqC 2.0 is supported. Does this mean that the pctv452e driver does not implement the 2.0 specifications? I have seen the S2-3650 work through a DiSEqC 1.0 switch without any problems.
Could someone shed some light on this matter? Am I missing something here? Perhaps the pragmatic approach would be to change the switch albeit a fine one.
thank in advance,
regards,
Martijn
Signature · 8 lines
31.69 nHz = once a year _______________________________________________ linux-dvb users mailing list For V4L/DVB development, please use instead [email protected] [email protected] http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Quoted 6 lines · Martijn
When I go through the s2-liplianin dvb drivers I noticed the DiSEqC 2.0 freq marker in the
stb0899_priv.hheader file. Also according to the STB0899 datasheet DiSEqC 2.0 is supported. Does this mean that the pctv452e driver does not implement the 2.0 specifications? I have seen the S2-3650 work through a DiSEqC 1.0 switch without any problems.
Does anyone have an idea as far as this matter? I'd like to use 2 or 3 S2-36xx parts with a Quad monoblock LNB which in principle contains a DiSEqC switch. Anything to watch out for? Am I looking for an LNB that talks DiSEqC 1.0?
Signature · 3 lines
If all the world's economists were laid end to end, we wouldn't reach a conclusion. -- William Baumol
Quoted 5 lines · Martijn
When I go through the s2-liplianin dvb drivers I noticed the DiSEqC 2.0 freq marker in the
stb0899_priv.hheader file. Also according to the STB0899 datasheet DiSEqC 2.0 is supported. Does this mean that the pctv452e driver does not implement the 2.0 specifications? I have seen the S2-3650 work through a DiSEqC 1.0 switch without any problems.
Does anyone have an idea as far as this matter? I'd like to use 2 or 3 S2-36xx parts with a Quad monoblock LNB (Lemon-Inverto) which in principle contains a DiSEqC switch.
I tried an earlier HG pull from September but my LNB seems to receive only Hotbird channels, and not all of them to begin with. No Astra channels so far.
I see no mentions of a newer DiSEqC code in pctv452e.c in the changelog - was there any progress on this?
TIA!
Signature · 2 lines
We really don't have any enemies. It's just that some of our best friends are trying to kill us.