Skip to contentSkip to conversation

b43: LP-PHY: Refactor TX gain table I/O

PATCH New Gábor Stefanik 1 participant 1 message Aug 11, 2009 Networking drivers (wireless)

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 b43: LP-PHY: Refactor TX gain table I/O

Make it possible to write individual gain table entries. Allow gain table entries to be written outside gain table init. Add version-agnostic helpers for writing gain tables. Use the new TX gain table helpers during table init.

---
drivers/net/wireless/b43/tables_lpphy.c | 85 +++++++++++++++++--------------
drivers/net/wireless/b43/tables_lpphy.h | 9 +++

2 files changed, 55 insertions(+), 39 deletions(-)
drivers/net/wireless/b43/tables_lpphy.c +0 -0
index 3507515..5fdb175 100644
@@ -1058,10 +1058,6 @@ static const u32 lpphy_papd_mult_table[] = {
	0x00036963, 0x000339f2, 0x00030a89, 0x0002db28,
};

-struct lpphy_tx_gain_table_entry {
- u8 gm, pga, pad, dac, bb_mult;
-};
-

static struct lpphy_tx_gain_table_entry lpphy_rev0_nopa_tx_gain_table[] = {
	{ .gm = 7, .pga = 15, .pad = 14, .dac = 0, .bb_mult = 152, },
	{ .gm = 7, .pga = 15, .pad = 14, .dac = 0, .bb_mult = 147, },
@@ -2345,44 +2341,55 @@ void lpphy_rev2plus_table_init(struct b43_wldev *dev)
	}
}

-
-static void lpphy_rev0_1_write_gain_table(struct b43_wldev *dev,
- struct lpphy_tx_gain_table_entry *table)
+static void lpphy_rev0_1_write_gain_table(struct b43_wldev *dev, int offset,
+ struct lpphy_tx_gain_table_entry data)
{

-	int i;
	u32 tmp;

	B43_WARN_ON(dev->phy.rev >= 2);

- for (i = 0; i < 128; i++) {
- tmp = table[i].pad << 11;

-		tmp |= table[i].pga << 7;
-		tmp |= table[i].gm  << 4;
-		tmp |= table[i].dac;

- b43_lptab_write(dev, B43_LPTAB32(10, 0xC0 + i), tmp);
- tmp = table[i].bb_mult << 20;
- b43_lptab_write(dev, B43_LPTAB32(10, 0x140 + i), tmp);
- }
+ tmp = data.pad << 11;

+	tmp |= data.pga << 7;
+	tmp |= data.gm  << 4;
+	tmp |= data.dac;

+ b43_lptab_write(dev, B43_LPTAB32(10, 0xC0 + offset), tmp);
+ tmp = data.bb_mult << 20;
+ b43_lptab_write(dev, B43_LPTAB32(10, 0x140 + offset), tmp);
}

-static void lpphy_rev2plus_write_gain_table(struct b43_wldev *dev,
- struct lpphy_tx_gain_table_entry *table)
+static void lpphy_rev2plus_write_gain_table(struct b43_wldev *dev, int offset,
+ struct lpphy_tx_gain_table_entry data)
{

-	int i;
	u32 tmp;

	B43_WARN_ON(dev->phy.rev < 2);

- for (i = 0; i < 128; i++) {
- tmp = table[i].pad << 16;

-		tmp |= table[i].pga << 8;
-		tmp |= table[i].gm;
-		tmp |= 0x7f000000;

- b43_lptab_write(dev, B43_LPTAB32(7, 0xC0 + i), tmp);
- tmp = table[i].bb_mult << 20;
- tmp |= table[i].dac << 28;
- b43_lptab_write(dev, B43_LPTAB32(7, 0x140 + i), tmp);
- }
+ tmp = data.pad << 16;

+	tmp |= data.pga << 8;
+	tmp |= data.gm;
+	tmp |= 0x7f000000;

+ b43_lptab_write(dev, B43_LPTAB32(7, 0xC0 + offset), tmp);
+ tmp = data.bb_mult << 20;
+ tmp |= data.dac << 28;
+ b43_lptab_write(dev, B43_LPTAB32(7, 0x140 + offset), tmp);
+}
+
+void lpphy_write_gain_table(struct b43_wldev *dev, int offset,
+ struct lpphy_tx_gain_table_entry data)
+{
+ if (dev->phy.rev >= 2)
+ lpphy_rev2plus_write_gain_table(dev, offset, data);
+ else
+ lpphy_rev0_1_write_gain_table(dev, offset, data);
+}
+
+void lpphy_write_gain_table_bulk(struct b43_wldev *dev, int offset, int count,
+ struct lpphy_tx_gain_table_entry *table)
+{
+ int i;
+
+ for (i = offset; i < count; i++)
+ lpphy_write_gain_table(dev, i, table[i]);
}

void lpphy_init_tx_gain_table(struct b43_wldev *dev)
@@ -2393,36 +2400,36 @@ void lpphy_init_tx_gain_table(struct b43_wldev *dev)

	case 0:
		if ((bus->sprom.boardflags_hi & B43_BFH_NOPA) ||
		    (bus->sprom.boardflags_lo & B43_BFL_HGPA))
-			lpphy_rev0_1_write_gain_table(dev,
+			lpphy_write_gain_table_bulk(dev, 0, 128,
					lpphy_rev0_nopa_tx_gain_table);
		else if (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ)
-			lpphy_rev0_1_write_gain_table(dev,
+			lpphy_write_gain_table_bulk(dev, 0, 128,
					lpphy_rev0_2ghz_tx_gain_table);
		else
-			lpphy_rev0_1_write_gain_table(dev,
+			lpphy_write_gain_table_bulk(dev, 0, 128,
					lpphy_rev0_5ghz_tx_gain_table);
		break;
	case 1:
		if ((bus->sprom.boardflags_hi & B43_BFH_NOPA) ||
		    (bus->sprom.boardflags_lo & B43_BFL_HGPA))
-			lpphy_rev0_1_write_gain_table(dev,
+			lpphy_write_gain_table_bulk(dev, 0, 128,
					lpphy_rev1_nopa_tx_gain_table);
		else if (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ)
-			lpphy_rev0_1_write_gain_table(dev,
+			lpphy_write_gain_table_bulk(dev, 0, 128,
					lpphy_rev1_2ghz_tx_gain_table);
		else
-			lpphy_rev0_1_write_gain_table(dev,
+			lpphy_write_gain_table_bulk(dev, 0, 128,
					lpphy_rev1_5ghz_tx_gain_table);
		break;
	default:
		if (bus->sprom.boardflags_hi & B43_BFH_NOPA)
-			lpphy_rev2plus_write_gain_table(dev,
+			lpphy_write_gain_table_bulk(dev, 0, 128,
					lpphy_rev2_nopa_tx_gain_table);
		else if (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ)
-			lpphy_rev2plus_write_gain_table(dev,
+			lpphy_write_gain_table_bulk(dev, 0, 128,
					lpphy_rev2_2ghz_tx_gain_table);
		else
-			lpphy_rev2plus_write_gain_table(dev,
+			lpphy_write_gain_table_bulk(dev, 0, 128,
					lpphy_rev2_5ghz_tx_gain_table);
	}
}
drivers/net/wireless/b43/tables_lpphy.h +0 -0
index b5024b6..84f1d26 100644
@@ -28,6 +28,15 @@ void b43_lptab_write_bulk(struct b43_wldev *dev, u32 offset,

void b2062_upload_init_table(struct b43_wldev *dev); void b2063_upload_init_table(struct b43_wldev *dev);

+struct lpphy_tx_gain_table_entry {
+ u8 gm, pga, pad, dac, bb_mult;
+};
+
+void lpphy_write_gain_table(struct b43_wldev *dev, int offset,
+ struct lpphy_tx_gain_table_entry data);
+void lpphy_write_gain_table_bulk(struct b43_wldev *dev, int offset, int count,
+ struct lpphy_tx_gain_table_entry *table);
+
void lpphy_rev0_1_table_init(struct b43_wldev *dev);
void lpphy_rev2plus_table_init(struct b43_wldev *dev);
void lpphy_init_tx_gain_table(struct b43_wldev *dev);

Signature · 1 line
1.6.2.4