Skip to contentSkip to conversation

D-Cache support for ARM?

U-Boot Dirk Behme 1 participant 1 message Aug 16, 2009

lore
Share & tools
lore

Dirk Behme

author
#0 lore raw

Hi,

does anybody have some D-Cache enable code for ARM he likes to share?

I'm thinking about some generic code which takes MMU configuration from board config and sets up a 16k first level page table (1MB only pages). With this, D-Cache can be enabled for the specified memory regions and is flushed/disabled again before U-Boot exit.

MMU config entries in board config could look like

CONFIG_ARM_MMU_FIRST_LEVEL_ENTRY( \
<physical/virtual base address>, // 1:1 mapping \
<size in MB>, \
<cacheable/noncachable>, \
<bufferable/nonbufferable> )

E.g.

CONFIG_ARM_MMU_FIRST_LEVEL_ENTRY(0x000, 16, NONCACHEABLE, NONBUFFERABLE) // 16MB NOR CONFIG_ARM_MMU_FIRST_LEVEL_ENTRY(0x100, 128, CACHEABLE, BUFFERABLE) // 128 MB RAM
CONFIG_ARM_MMU_FIRST_LEVEL_ENTRY(0xF00, 1, NONCACHEABLE, NONBUFFERABLE) // 1MB register window

Having only a 1:1 mapping (physical/virtual) would be sufficient in a first step, as we are only interested in D-Cache support here (using the same memory map as currently done without MMU).

Opinions?

Best regards

Dirk