RX/TX bytes counter differences in eth0 and eth1 when using NAT
Subsystems (2)
Hello
It seems that RX/TX bytes counters doesn't increase at the same speed in eth0 side than they do in eth1 side, even physically the same data which is coming in via eth1 should be coming out via eth0. Is this excepted?
Kernel is 2.6.27.30-170.2.82.fc10.i686 and eth0 (lan) and eth1 (wan) and there is iptables nat between lan and wan interfaces.
Signature · 1 line
Best Regards, Jar