enca_1.9.bb: remove unused configure test which is bound to fail.
PATCH 1/1 enca_1.9.bb: remove unused configure test which is bound to fail.
Enca's configure will fail on everything not arm or ix86.
---
recipes/enca/enca_1.9.bb | 7 ++++++- site/arm-linux | 3 --- site/ix86-common | 3 --- 3 files changed, 6 insertions(+), 7 deletions(-)
recipes/enca/enca_1.9.bb +0 -0
@@ -3,7 +3,7 @@ SECTION = "libs"
PRIORITY = "optional"
LICENSE = "GPLv2"
HOMEPAGE = "http://trific.ath.cx/software/enca/"
-PR = "r3"
+PR = "r4"
SRC_URI = "http://www.sourcefiles.org/Networking/Tools/Miscellanenous/enca-${PV}.tar.bz2 \ file://configure-hack.patch;patch=1 \
@@ -15,6 +15,11 @@ inherit autotools
EXTRA_OECONF="--with-libiconv-prefix=${STAGING_DIR_HOST}${layout_exec_prefix}"
+do_configure_prepend() {
+ # remove failing test which checks for something that isn't even used
+ sed -i -e '/ye_FUNC_SCANF_MODIF_SIZE_T/d' configure.ac
+}
+do_configure_append() {
sed -i s:-I/usr/include::g Makefile
sed -i s:-I/usr/include::g */Makefile
site/arm-linux +0 -0
@@ -148,9 +148,6 @@ samba_cv_USE_SETREUID=${samba_cv_USE_SETREUID=yes}
samba_cv_USE_SETUIDX=${samba_cv_USE_SETUIDX=yes} samba_cv_LINUX_LFS_SUPPORT=${samba_cv_LINUX_LFS_SUPPORT=yes}
-# enca
-yeti_cv_func_scanf_modif_size_t=yes
-
# clamav
clamav_av_func_working_snprintf_long=${clamav_av_func_working_snprintf_long=yes}
clamav_av_have_in_port_t=${clamav_av_have_in_port_t=yes}site/ix86-common +0 -0
@@ -104,9 +104,6 @@ ac_cv_func_posix_getpwnam_r=${ac_cv_func_posix_getpwnam_r=yes}
dpkg_cv_va_copy=${ac_cv_va_copy=no}
dpkg_cv___va_copy=${ac_cv___va_copy=yes}
-# enca
-yeti_cv_func_scanf_modif_size_t=yes
-
# ettercap
ettercap_cv_type_socklen_t=${ettercap_cv_type_socklen_t=yes}Signature · 1 line
1.6.0.3
Quoted 26 lines · Graham Gower
Enca's configure will fail on everything not arm or ix86.
Signed-off-by Graham Gower <[email protected]>---
recipes/enca/enca_1.9.bb | 7 ++++++- site/arm-linux | 3 --- site/ix86-common | 3 --- 3 files changed, 6 insertions(+), 7 deletions(-)recipes/enca/enca_1.9.bb +0
-0@@ -3,7 +3,7 @@ SECTION = "libs"PRIORITY = "optional"
LICENSE = "GPLv2"
HOMEPAGE = "http://trific.ath.cx/software/enca/"recipes/enca/enca_1.9.bb +1
-1-PR = "r3" +PR = "r4"SRC_URI = "http://www.sourcefiles.org/Networking/Tools/Miscellanenous/enca-${PV}.tar.bz2 \ file://configure-hack.patch;patch=1 \recipes/enca/enca_1.9.bb +0
-0@@ -15,6 +15,11 @@ inherit autotoolsEXTRA_OECONF="--with-libiconv-prefix=${STAGING_DIR_HOST}${layout_exec_prefix}"
recipes/enca/enca_1.9.bb
Quoted 4 lines
recipes/enca/enca_1.9.bb +4
-0+do_configure_prepend() { + # remove failing test which checks for something that isn't even used + sed -i -e '/ye_FUNC_SCANF_MODIF_SIZE_T/d' configure.ac +}
you may not require this hunk. see below
Quoted 9 lines
+
do_configure_append(){
sed -i s:-I/usr/include::gMakefile
sed -i s:-I/usr/include::g */Makefilesite/arm-linux +0
-0
site/arm-linux samba_cv_USE_SETREUID=${samba_cv_USE_SETREUID=yes} · line 153
Quoted 6 lines
site/arm-linux +0
-3@@ -148,9 +148,6 @@ samba_cv_USE_SETREUID=${samba_cv_USE_SETREUID=yes} samba_cv_USE_SETUIDX=${samba_cv_USE_SETUIDX=yes} samba_cv_LINUX_LFS_SUPPORT=${samba_cv_LINUX_LFS_SUPPORT=yes} -# enca -yeti_cv_func_scanf_modif_size_t=yes -
set this to 'no'
Quoted 8 lines
site/arm-linux +0
-0# clamav clamav_av_func_working_snprintf_long=${clamav_av_func_working_snprintf_long=yes} clamav_av_have_in_port_t=${clamav_av_have_in_port_t=yes}site/ix86-common +0
-0
site/ix86-common ac_cv_func_posix_getpwnam_r=${ac_cv_func_posix_getpwnam_r=yes} · line 109
Quoted 6 lines
site/ix86-common +0
-3@@ -104,9 +104,6 @@ ac_cv_func_posix_getpwnam_r=${ac_cv_func_posix_getpwnam_r=yes} dpkg_cv_va_copy=${ac_cv_va_copy=no} dpkg_cv___va_copy=${ac_cv___va_copy=yes} -# enca -yeti_cv_func_scanf_modif_size_t=yes -
same here.
Quoted 11 lines
site/ix86-common +0
-0# ettercap ettercap_cv_type_socklen_t=${ettercap_cv_type_socklen_t=yes}Signature · 7 lines
1.6.0.3 _______________________________________________ Openembedded-devel mailing list [email protected] http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel
2009/8/27 Khem Raj <[email protected]>:
Quoted 15 lines
Review
Quoted 4 lines
(quoted diff) +4
-0+do_configure_prepend() { + # remove failing test which checks for something that isn't even used + sed -i -e '/ye_FUNC_SCANF_MODIF_SIZE_T/d' configure.ac +}you may not require this hunk. see below
Review
Quoted 3 lines
(quoted diff) +0
-3-# enca -yeti_cv_func_scanf_modif_size_t=yes -set this to 'no'
Quoted 5 lines
Review
Quoted 3 lines
(quoted diff) +0
-3-# enca -yeti_cv_func_scanf_modif_size_t=yes -same here.
The two site files that specify yeti_cv_func_scanf_modif_size_t=yes probably make things work on those two systems. But every other system will fail to configure. Hence, a fix which is independent of the architecture. And with that fix, I figured the arch dependent fixes should be removed.
-Graham
Quoted 8 lines · Graham Gower
Enca's configure will fail on everything not arm or ix86.
Signed-off-by Graham Gower <[email protected]>--- recipes/enca/enca_1.9.bb | 7 ++++++- site/arm-linux | 3 --- site/ix86-common | 3 --- 3 files changed, 6 insertions(+), 7 deletions(-)
Looks fine to me. It does seem a bit weird that enca tests this scanf thing and then doesn't use the information but, sure enough, I couldn't find any reference to the result anywhere in the source code.
Do you have commit access or do you want me to check it in for you?
p.
2009/8/27 Phil Blundell <[email protected]>:
Quoted 2 lines
Do you have commit access or do you want me to check it in for you?
I don't have commit access, so if you could commit it that would be great.
-Graham
Quoted 10 lines · Phil Blundell
Quoted 8 lines · Graham Gower
Enca's configure will fail on everything not arm or ix86.
Signed-off-by Graham Gower <[email protected]>--- recipes/enca/enca_1.9.bb | 7 ++++++- site/arm-linux | 3 --- site/ix86-common | 3 --- 3 files changed, 6 insertions(+), 7 deletions(-)
Quoted 3 lines
Looks fine to me. It does seem a bit weird that enca tests this scanf thing and then doesn't use the information but, sure enough, I couldn't find any reference to the result anywhere in the source code.
It seems to be a relict from old versions.
Here is a new upstream, and the commit that fixes your problem:
http://gitorious.org/enca/enca/commit/163589d468dee45ab5495a8f4f8058d27da91a91
________________________________________________________________________
Stanislav Brabec
http://www.penguin.cz/~utx/zaurus
Quoted 5 lines · Graham Gower
2009/8/27 Phil Blundell <[email protected]>:
Quoted 2 lines
Do you have commit access or do you want me to check it in for you?
I don't have commit access, so if you could commit it that would be great.
Righto, done.
p.