gspca_sunplus: problem with brightness control
Hi,
I am using a "Trust 610 LCD Powerc@m Zoom" device in webcam mode (USB ID=06d6:0031). I am running Linux 2.6.31-rc7 updated with the
http://linuxtv.org/hg/v4l-dvb repository at version 12564:6f58a5d8c7c6.
When I start watching to the webcam picture and change the brightness value then I get the following result. The possible brigthness values are between 0 and 255.
for i in $(seq 0 255); do echo $i; v4lctl bright $i; done
0: average image
|
| lighter images
v
127: the most light image
|
| "jump" in brightness
v
128: the most dark image
|
| lighter images
v
255: average image
It seems to me that the values 128...255 are really negative numbers, so the possible range should be between -128...127 (two's complement representation) in case of this webcam.
Note that the contrast and color controls does not have any jump in the range 0...255.
Regards,
Márton Németh
Quoted 8 lines · On Sun, 30 Aug 2009 08:22:46 +0200 Németh Márton <[email protected]> wrote:
I am using a "Trust 610 LCD Powerc@m Zoom" device in webcam mode (USB ID=06d6:0031). I am running Linux 2.6.31-rc7 updated with the
http://linuxtv.org/hg/v4l-dvb repository at version 12564:6f58a5d8c7c6.When I start watching to the webcam picture and change the brightness value then I get the following result. The possible brigthness values are between 0 and 255.
[snip]
Hi Márton,
I fixed this problem in my test repository. As I did some other changes in sunplus.c, may you check if everything works for you?
Regards.
Signature · 2 lines
Ken ar c'hentañ | ** Breizh ha Linux atav! ** Jef | http://moinejf.free.fr/
Hi,
Quoted 8 lines · Jean-Francois Moine
Quoted 5 lines · On Sun, 30 Aug 2009 08:22:46 +0200 Németh Márton <[email protected]> wrote:
I am using a "Trust 610 LCD Powerc@m Zoom" device in webcam mode (USB ID=06d6:0031). I am running Linux 2.6.31-rc7 updated with the
http://linuxtv.org/hg/v4l-dvb repository at version 12564:6f58a5d8c7c6.
Quoted 7 lines
Quoted 3 lines
When I start watching to the webcam picture and change the brightness value then I get the following result. The possible brigthness values are between 0 and 255.
[snip]I fixed this problem in my test repository. As I did some other changes in
sunplus.c, may you check if everything works for you?
I tested the version "12663:7f68f4e03299" from
http://linuxtv.org/hg/~jfrancois/gspca/ . The picture is still OK, the brightness, contrast and color contrast are working correctly now as expected. I have done the tests with "Trust 610 LCD Powerc@m Zoom" device in webcam mode (USB ID=06d6:0031).
Thank you for your work!
Regards,
Márton Németh