Skip to contentSkip to conversation

acl_test01 TestCase

LTP Jacky Malcles 3 participants 4 messages Sep 7, 2009 – Sep 15, 2009

lore
Share & tools
lore
#0 lore raw

Subrata,

runltp can not run acl_test01 by default, we need a mounted partition with ACL options.

To have acl_test01 started by runltp (or manually) without any acl aware partition,

if you agree I suggest the following patch: a kind of new setup and

at the same time the activation of a non root user.

regards,

Jacky

Signature · 3 lines
Jacky Malcles    	     B1-403   Email : [email protected]
Bull SA, 1 rue de Provence, B.P 208, 38432 Echirolles CEDEX, FRANCE
Tel : 04.76.29.73.14
acl_test01 renamed from acl_test01.ori +87 -11
@@ -24,17 +24,91 @@
 #
 #  HISTORY:
 #    03/03 Jerone Young  ([email protected])
+#    09/08 Jacky Malcles changing the setup to have this TC started by runltp 
 #*********************************************************************
-export PATH=$PATH:/usr/sbin/
+#
+################################################################
+# 
+# Make sure that uid=root is running this script. 
+# Make sure that loop device is built into the kernel  
+# Make sure that ACL(Access Control List) and Extended Attribute are
+#     built into the kernel
+#
+#
+################################################################
 
 TEST_USER1="acltest1"
 TEST_USER1_GROUP="users"
 TEST_USER1_PASSWD="ltp_test_pass1"
-#ensure the test partition is ACL aware
-TEST_USER1_HOMEDIR="/tmp/$TEST_USER1"
+TEST_USER1_HOMEDIR="tacl/mount-ext3/$TEST_USER1"
+
+FILE_ACL="tacl/mount-ext3/test_file"
+FILE_ACL_LINK="tacl/mount-ext3/test_file_link"
+TCbin=`pwd`
+
+iam=`whoami`
+if [ "z$iam" = "z$TEST_USER1" ]
+then
+	echo ""
+else
+if [ $UID != 0 ]
+then
+        echo "FAILED: Must have root access to execute this script"
+        exit 1
+fi
+
+if [ ! -e tacl ]
+then
+        mkdir -m 777 tacl
+else
+        echo "FAILED: Directory tacl are exist"
+        exit 1
+fi
+
+#       The  following  commands  can  be  used as an example of using the loop
+#       device.
+
+dd if=/dev/zero of=tacl/blkext3 bs=1k count=10240
+chmod 777 tacl/blkext3
+#
+losetup /dev/loop0 tacl/blkext3 2>&1 > /dev/null
+if [ $? != 0 ]
+then
+        echo ""
+        echo "FAILED:  [ losetup ] Must have loop device support by kernel"
+        echo -e "\t to execute this script"
+        exit 1
+fi
+
+mount | grep ext2
+if [ $? != 0 ] 
+then
+        mkfs -t ext3 /dev/loop0 #> /dev/null 2>&1
+        mkdir  -m 777 tacl/mount-ext3
+        mount -t ext3 -o defaults,acl,user_xattr /dev/loop0 tacl/mount-ext3
+        if [ $? != 0 ]
+        then
+                echo ""
+                echo "FAILED: [ mount ] Make sure that ACL (Access Control List)"
+                echo -e "\t and Extended Attribute are built into the kernel"
+                echo -e "\t Can not mount ext3 file system with acl and user_xattr options"
+                exit 1
+        fi
+else
+        mkfs -t ext2 /dev/loop0
+        mkdir  -m 777 tacl/mount-ext3
+        mount -t ext2 -o defaults,acl,user_xattr /dev/loop0 tacl/mount-ext3
+        if [ $? != 0 ]
+        then
+                echo ""
+                echo "FAILED: [ mount ] Make sure that ACL (Access Control List)"
+                echo -e "\t and Extended Attribute are built into the kernel"
+                echo -e "\t Can not mount ext2 file system with acl and user_xattr options"
+                exit 1
+        fi
+fi
+fi
 
-FILE_ACL="/tmp/test_file"
-FILE_ACL_LINK="/tmp/test_file_link"
 
 #-----------------------------------------------------------------------
 # FUNCTION:  do_setup
@@ -55,7 +129,7 @@ do_setup(){
 	rm -rf $TEST_USER1_HOMEDIR 
 	userdel $TEST_USER1 > /dev/null 2>&1
 	sleep 1
-	useradd -d $TEST_USER1_HOMEDIR -m -g $TEST_USER1_GROUP $TEST_USER1 -s /bin/sh
+	useradd -d `pwd`/$TEST_USER1_HOMEDIR -m -g $TEST_USER1_GROUP $TEST_USER1 -s /bin/sh
 
 	if [ $? != 0 ]
 	then {
@@ -81,6 +155,9 @@ do_cleanup() {
 	userdel $TEST_USER1
 	rm -f $FILE_ACL > /dev/null 2>&1
 	rm -f $FILE_ACL_LINK > /dev/null 2>&1
+	umount -d tacl/mount-ext3
+	rm -rf tacl
+
 }
 
 #-----------------------------------------------------------------------
@@ -91,6 +168,7 @@ iam=`whoami`
 EXIT_CODE=0
 if [ "z$iam" = "z$TEST_USER1" ]
 then
+	echo ""
 	echo "TESTING ACLS FOR 2ND USER $iam"
 
 	#setup files for extended attributes
@@ -118,6 +196,7 @@ then
         fi
 else
 	do_setup
+	echo ""
 	echo "TESTING ACLS FOR USER $iam"
 
 	touch $FILE_ACL
@@ -150,11 +229,8 @@ else
 	chown $TEST_USER1 $FILE_ACL
 	chown $TEST_USER1 $FILE_ACL_LINK
 
-	if [ -z ${TCbin} ]
-	then
-   		export TCbin=$PWD
-	fi
-	
+	su $TEST_USER1 -c "$0"
+	echo ""
 	do_cleanup
 fi	
 

------------------------------------------------------------------------------
Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day trial. Simplify your report design, integration and deployment - and focus on what you do best, core application coding. Discover what's new with Crystal Reports now. http://p.sf.net/sfu/bobj-july

_______________________________________________
Ltp-list mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/ltp-list

#1 lore raw

Hi Jacky,

Quoted 8 lines · Jacky Malcles

Subrata,

runltp can not run acl_test01 by default, we need a mounted partition
with ACL options.

To have acl_test01 started by runltp (or manually) without any acl
aware partition,

Quoted 27 lines

if you agree I suggest the following patch: a kind of new setup and

at the same time the activation of a non root user.

regards,

Jacky

Signature · 15 lines
 Jacky Malcles               B1-403   Email : [email protected]
 Bull SA, 1 rue de Provence, B.P 208, 38432 Echirolles CEDEX, FRANCE
 Tel : 04.76.29.73.14








plain text
document
attachment
(envoi)

Please Sign-off this patch, and, also create this patch from LTPROOT directory.

Regards--
Subrata

Quoted 152 lines
acl_test01 2009-09-01 16:12:39.000000000 +0200 renamed from acl_test01.ori 2009-09-01 16:12:53.000000000 +0200 +1 -0
@@ -24,17 +24,91 @@
 #
 #  HISTORY:
 #    03/03 Jerone Young  ([email protected])
+#    09/08 Jacky Malcles changing the setup to have this TC started

by runltp
#*********************************************************************

acl_test01 2009-09-01 16:12:39.000000000 +0200 renamed from acl_test01.ori 2009-09-01 16:12:53.000000000 +0200 +36 -3
-export PATH=$PATH:/usr/sbin/
+#
+################################################################
+# 
+# Make sure that uid=root is running this script. 
+# Make sure that loop device is built into the kernel  
+# Make sure that ACL(Access Control List) and Extended Attribute are
+#     built into the kernel
+#
+#
+################################################################
 
 TEST_USER1="acltest1"
 TEST_USER1_GROUP="users"
 TEST_USER1_PASSWD="ltp_test_pass1"
-#ensure the test partition is ACL aware
-TEST_USER1_HOMEDIR="/tmp/$TEST_USER1"
+TEST_USER1_HOMEDIR="tacl/mount-ext3/$TEST_USER1"
+
+FILE_ACL="tacl/mount-ext3/test_file"
+FILE_ACL_LINK="tacl/mount-ext3/test_file_link"
+TCbin=`pwd`
+
+iam=`whoami`
+if [ "z$iam" = "z$TEST_USER1" ]
+then
+       echo ""
+else
+if [ $UID != 0 ]
+then
+        echo "FAILED: Must have root access to execute this script"
+        exit 1
+fi
+
+if [ ! -e tacl ]
+then
+        mkdir -m 777 tacl
+else
+        echo "FAILED: Directory tacl are exist"
+        exit 1
+fi
+
+#       The  following  commands  can  be  used as an example of

using the loop

acl_test01 2009-09-01 16:12:39.000000000 +0200 renamed from acl_test01.ori 2009-09-01 16:12:53.000000000 +0200 +10 -0
+#       device.
+
+dd if=/dev/zero of=tacl/blkext3 bs=1k count=10240
+chmod 777 tacl/blkext3
+#
+losetup /dev/loop0 tacl/blkext3 2>&1 > /dev/null
+if [ $? != 0 ]
+then
+        echo ""
+        echo "FAILED:  [ losetup ] Must have loop device support by

kernel"

acl_test01 2009-09-01 16:12:39.000000000 +0200 renamed from acl_test01.ori 2009-09-01 16:12:53.000000000 +0200 +10 -0
+        echo -e "\t to execute this script"
+        exit 1
+fi
+
+mount | grep ext2
+if [ $? != 0 ] 
+then
+        mkfs -t ext3 /dev/loop0 #> /dev/null 2>&1
+        mkdir  -m 777 tacl/mount-ext3
+        mount -t ext3 -o defaults,acl,user_xattr /dev/loop0

tacl/mount-ext3

acl_test01 2009-09-01 16:12:39.000000000 +0200 renamed from acl_test01.ori 2009-09-01 16:12:53.000000000 +0200 +4 -0
+        if [ $? != 0 ]
+        then
+                echo ""
+                echo "FAILED: [ mount ] Make sure that ACL (Access

Control List)"
+ echo -e "\t and Extended Attribute are built into the
kernel"
+ echo -e "\t Can not mount ext3 file system with acl
and user_xattr options"

acl_test01 2009-09-01 16:12:39.000000000 +0200 renamed from acl_test01.ori 2009-09-01 16:12:53.000000000 +0200 +6 -0
+                exit 1
+        fi
+else
+        mkfs -t ext2 /dev/loop0
+        mkdir  -m 777 tacl/mount-ext3
+        mount -t ext2 -o defaults,acl,user_xattr /dev/loop0

tacl/mount-ext3

acl_test01 2009-09-01 16:12:39.000000000 +0200 renamed from acl_test01.ori 2009-09-01 16:12:53.000000000 +0200 +4 -0
+        if [ $? != 0 ]
+        then
+                echo ""
+                echo "FAILED: [ mount ] Make sure that ACL (Access

Control List)"
+ echo -e "\t and Extended Attribute are built into the
kernel"
+ echo -e "\t Can not mount ext2 file system with acl
and user_xattr options"

acl_test01 2009-09-01 16:12:39.000000000 +0200 renamed from acl_test01.ori 2009-09-01 16:12:53.000000000 +0200 +4 -3
+                exit 1
+        fi
+fi
+fi
 
-FILE_ACL="/tmp/test_file"
-FILE_ACL_LINK="/tmp/test_file_link"
 
 #-----------------------------------------------------------------------
 # FUNCTION:  do_setup
@@ -55,7 +129,7 @@ do_setup(){
        rm -rf $TEST_USER1_HOMEDIR 
        userdel $TEST_USER1 > /dev/null 2>&1
        sleep 1
-       useradd -d $TEST_USER1_HOMEDIR -m -g $TEST_USER1_GROUP

$TEST_USER1 -s /bin/sh
+ useradd -d pwd/$TEST_USER1_HOMEDIR -m -g $TEST_USER1_GROUP
$TEST_USER1 -s /bin/sh

        if [ $? != 0 ]
        then {
acl_test01 2009-09-01 16:12:39.000000000 +0200 renamed from acl_test01.ori 2009-09-01 16:12:53.000000000 +0200 +5 -0
@@ -81,6 +155,9 @@ do_cleanup() {
        userdel $TEST_USER1
        rm -f $FILE_ACL > /dev/null 2>&1
        rm -f $FILE_ACL_LINK > /dev/null 2>&1
+       umount -d tacl/mount-ext3
+       rm -rf tacl
+
 }
 
 #-----------------------------------------------------------------------
@@ -91,6 +168,7 @@ iam=`whoami`
 EXIT_CODE=0
 if [ "z$iam" = "z$TEST_USER1" ]
 then
+       echo ""
        echo "TESTING ACLS FOR 2ND USER $iam"
 
        #setup files for extended attributes
@@ -118,6 +196,7 @@ then
         fi
 else
        do_setup
+       echo ""
        echo "TESTING ACLS FOR USER $iam"
 
        touch $FILE_ACL
@@ -150,11 +229,8 @@ else
        chown $TEST_USER1 $FILE_ACL
        chown $TEST_USER1 $FILE_ACL_LINK
 

acl_test01 2009-09-01 16:12:39.000000000 +0200 else · line 236

Quoted 10 lines
acl_test01 2009-09-01 16:12:39.000000000 +0200 renamed from acl_test01.ori 2009-09-01 16:12:53.000000000 +0200 +2 -5
-       if [ -z ${TCbin} ]
-       then
-               export TCbin=$PWD
-       fi
-       
+       su $TEST_USER1 -c "$0"
+       echo ""
        do_cleanup
 fi     
 

------------------------------------------------------------------------------
Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day trial. Simplify your report design, integration and deployment - and focus on what you do best, core application coding. Discover what's new with Crystal Reports now. http://p.sf.net/sfu/bobj-july
_______________________________________________
Ltp-list mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/ltp-list

#2 lore raw

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Quoted 38 lines · Subrata Modak

Hi Jacky,

Quoted 8 lines · Jacky Malcles

Subrata,

runltp can not run acl_test01 by default, we need a mounted partition
with ACL options.

To have acl_test01 started by runltp (or manually) without any acl
aware partition,

Quoted 24 lines

if you agree I suggest the following patch: a kind of new setup and

at the same time the activation of a non root user.

regards,

Jacky

Signature · 15 lines
 Jacky Malcles               B1-403   Email : [email protected]
 Bull SA, 1 rue de Provence, B.P 208, 38432 Echirolles CEDEX, FRANCE
 Tel : 04.76.29.73.14








plain text
document
attachment
(envoi)
Quoted 3 lines

Please Sign-off this patch, and, also create this patch from LTPROOT directory.

Hi Subrata,

I recreated from LTPROOT and signed of
hope it'll work,

Quoted 3 lines

Regards--
Subrata

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.5 (GNU/Linux)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/

iQEVAwUBSqdh1HFYHhojb+kFAQKb4AgAkNLBuKjF1SRGZ0Oi+gqVUCBKOKPblDpW QkY/LDS2slY+1dlTCwgodu/FRBqJQj9GnfUnGGG8twa+E3MD71OwCX/xHPO5HzZf rt3rc+iP9Wapf3mRWbv2ZOzp7Qvd7X3t7wVHYwYDc6g41V0MD5cTcfQUWrb4/j1P AQRNUjx6dnt7zV1JCPqi0K2qmTbhRnyqyTjdrQnPDgxx7Ion38l0TKGle2IsLovx iV9pveV9WgJJNA9DMUaQV7bga/Uh6+oabucztUrNY01x8xv1XhailMZw1h7XnyOe xpv+506OvEMacSPD81Hvz73CBo4z4ABKl9uOifdsBeqA/abKsId+ow== =EcrR
-----END PGP SIGNATURE-----

testcases/kernel/fs/acls/acl_test01 +87 -11
@@ -24,17 +24,91 @@
 #
 #  HISTORY:
 #    03/03 Jerone Young  ([email protected])
+#    09/08 Jacky Malcles changing the setup to have this TC started by runltp 
 #*********************************************************************
-export PATH=$PATH:/usr/sbin/
+#
+################################################################
+# 
+# Make sure that uid=root is running this script. 
+# Make sure that loop device is built into the kernel  
+# Make sure that ACL(Access Control List) and Extended Attribute are
+#     built into the kernel
+#
+#
+################################################################
 
 TEST_USER1="acltest1"
 TEST_USER1_GROUP="users"
 TEST_USER1_PASSWD="ltp_test_pass1"
-#ensure the test partition is ACL aware
-TEST_USER1_HOMEDIR="/tmp/$TEST_USER1"
+TEST_USER1_HOMEDIR="tacl/mount-ext3/$TEST_USER1"
+
+FILE_ACL="tacl/mount-ext3/test_file"
+FILE_ACL_LINK="tacl/mount-ext3/test_file_link"
+TCbin=`pwd`
+
+iam=`whoami`
+if [ "z$iam" = "z$TEST_USER1" ]
+then
+	echo ""
+else
+if [ $UID != 0 ]
+then
+        echo "FAILED: Must have root access to execute this script"
+        exit 1
+fi
+
+if [ ! -e tacl ]
+then
+        mkdir -m 777 tacl
+else
+        echo "FAILED: Directory tacl are exist"
+        exit 1
+fi
+
+#       The  following  commands  can  be  used as an example of using the loop
+#       device.
+
+dd if=/dev/zero of=tacl/blkext3 bs=1k count=10240
+chmod 777 tacl/blkext3
+#
+losetup /dev/loop0 tacl/blkext3 2>&1 > /dev/null
+if [ $? != 0 ]
+then
+        echo ""
+        echo "FAILED:  [ losetup ] Must have loop device support by kernel"
+        echo -e "\t to execute this script"
+        exit 1
+fi
+
+mount | grep ext2
+if [ $? != 0 ] 
+then
+        mkfs -t ext3 /dev/loop0 #> /dev/null 2>&1
+        mkdir  -m 777 tacl/mount-ext3
+        mount -t ext3 -o defaults,acl,user_xattr /dev/loop0 tacl/mount-ext3
+        if [ $? != 0 ]
+        then
+                echo ""
+                echo "FAILED: [ mount ] Make sure that ACL (Access Control List)"
+                echo -e "\t and Extended Attribute are built into the kernel"
+                echo -e "\t Can not mount ext3 file system with acl and user_xattr options"
+                exit 1
+        fi
+else
+        mkfs -t ext2 /dev/loop0
+        mkdir  -m 777 tacl/mount-ext3
+        mount -t ext2 -o defaults,acl,user_xattr /dev/loop0 tacl/mount-ext3
+        if [ $? != 0 ]
+        then
+                echo ""
+                echo "FAILED: [ mount ] Make sure that ACL (Access Control List)"
+                echo -e "\t and Extended Attribute are built into the kernel"
+                echo -e "\t Can not mount ext2 file system with acl and user_xattr options"
+                exit 1
+        fi
+fi
+fi
 
-FILE_ACL="/tmp/test_file"
-FILE_ACL_LINK="/tmp/test_file_link"
 
 #-----------------------------------------------------------------------
 # FUNCTION:  do_setup
@@ -55,7 +129,7 @@ do_setup(){
 	rm -rf $TEST_USER1_HOMEDIR 
 	userdel $TEST_USER1 > /dev/null 2>&1
 	sleep 1
-	useradd -d $TEST_USER1_HOMEDIR -m -g $TEST_USER1_GROUP $TEST_USER1 -s /bin/sh
+	useradd -d `pwd`/$TEST_USER1_HOMEDIR -m -g $TEST_USER1_GROUP $TEST_USER1 -s /bin/sh
 
 	if [ $? != 0 ]
 	then {
@@ -81,6 +155,9 @@ do_cleanup() {
 	userdel $TEST_USER1
 	rm -f $FILE_ACL > /dev/null 2>&1
 	rm -f $FILE_ACL_LINK > /dev/null 2>&1
+	umount -d tacl/mount-ext3
+	rm -rf tacl
+
 }
 
 #-----------------------------------------------------------------------
@@ -91,6 +168,7 @@ iam=`whoami`
 EXIT_CODE=0
 if [ "z$iam" = "z$TEST_USER1" ]
 then
+	echo ""
 	echo "TESTING ACLS FOR 2ND USER $iam"
 
 	#setup files for extended attributes
@@ -118,6 +196,7 @@ then
         fi
 else
 	do_setup
+	echo ""
 	echo "TESTING ACLS FOR USER $iam"
 
 	touch $FILE_ACL
@@ -150,11 +229,8 @@ else
 	chown $TEST_USER1 $FILE_ACL
 	chown $TEST_USER1 $FILE_ACL_LINK
 
-	if [ -z ${TCbin} ]
-	then
-   		export TCbin=$PWD
-	fi
-	
+	su $TEST_USER1 -c "$0"
+	echo ""
 	do_cleanup
 fi	
 

------------------------------------------------------------------------------
Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day trial. Simplify your report design, integration and deployment - and focus on what you do best, core application coding. Discover what's new with Crystal Reports now. http://p.sf.net/sfu/bobj-july

_______________________________________________
Ltp-list mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/ltp-list

#3 lore raw
In reply to Jacky Malcles
Quoted 13 lines · Jacky Malcles

runltp can not run acl_test01 by default, we need a mounted partition with ACL options.

To have acl_test01 started by runltp (or manually) without any acl aware partition,

acl_test01 renamed from acl_test01.ori +4 -0
 
+mount | grep ext2
+if [ $? != 0 ] 
+then
+        mkfs -t ext3 /dev/loop0 #> /dev/null 2>&1

acl_test01 line 96

Quoted 10 lines
acl_test01 renamed from acl_test01.ori +10 -0
+        mkdir  -m 777 tacl/mount-ext3
+        mount -t ext3 -o defaults,acl,user_xattr /dev/loop0 tacl/mount-ext3
+        if [ $? != 0 ]
+        then
+                echo ""
+                echo "FAILED: [ mount ] Make sure that ACL (Access Control List)"
+                echo -e "\t and Extended Attribute are built into the kernel"
+                echo -e "\t Can not mount ext3 file system with acl and user_xattr options"
+                exit 1
+        fi

Shouldn't this return success, with TCONF?

However, it seems mount doesn't fail when trying this on a kernel with CONFIG_EXT3_FS_ACL=n, so this is not a good way to detect the absence of the ACL/XA feature.

With kind regards,

Geert Uytterhoeven
Software Architect
Techsoft Centre

Technology and Software Centre Europe
The Corporate Village · Da Vincilaan 7-D1 · B-1935 Zaventem · Belgium

Phone:    +32 (0)2 700 8453
Fax:      +32 (0)2 700 8622
E-mail:   [email protected]
Internet: http://www.sony-europe.com/

A division of Sony Europe (Belgium) N.V.
VAT BE 0413.825.160 · RPR Brussels
Fortis · BIC GEBABEBB · IBAN BE41293037680010

------------------------------------------------------------------------------
Come build with us! The BlackBerry® Developer Conference in SF, CA is the only developer event you need to attend this year. Jumpstart your developing skills, take BlackBerry mobile applications to market and stay ahead of the curve. Join us from November 9-12, 2009. Register now!
http://p.sf.net/sfu/devconf
_______________________________________________
Ltp-list mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/ltp-list