Skip to contentSkip to conversation

Firmware Upgrade

U-Boot Rahanesh 2 participants 4 messages Sep 15, 2009

lore
Share & tools
lore

Rahanesh

author
#0 lore raw

Hi All,

Is it Possible from Linux to set an environment variable of u-Boot.?

This is for Firmware up gradation.

Currently Linux has 4 mtd partitions in flash

mtd0 : U-Boot
mtd1: JFFS file system (Golden image)
mtd2: JFFS file system (Silver image)
mtd3: Configs

U boot does an fsload of uImage(Linux image) from Golden JFFS and boots up Linux.

Now from Linux I can download a new JFFS(Silver) and flash it to mtd2 partition of Flash.

Is there any mechanism that Linux acknowledges the u-boot about the new jffs image that next time it has to
do an fsload of uImage(Linux image) from Silver JFFS , not Golden JFFS.

I thought of Doing this using some environment variables .

But after a successful download of new jffs and writing to mtd2 partition , How will Linux update the environment variable of U-boot?

Any better idea for firmware up gradation?

Expecting your Suggestions and Help

Thanks
Rahanesh

#1 lore raw

Dear Rahanesh,

Quoted 2 lines · In message <[email protected]> you wrote:

Is it Possible from Linux to set an environment variable of u-Boot.?

If your environment is stored in NOR or NAND flash, then you can use the tools from the tools/env/ directory (fw_setenv / fw_printenv).

It should be trivial to adapt the code for other storage devices, too.

Quoted 2 lines

But after a successful download of new jffs and writing to mtd2 partition , How will Linux update the environment variable of U-boot?

Use fw_setenv.

Best regards,

Wolfgang Denk

--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de Any sufficiently advanced technology is indistinguishable from magic.
- Arthur C. Clarke

author
#2 lore raw

Hi Wolfgang Denk,

Thank you very much for the reply!!!

Few questions:

1) You said " If your environment is stored in NOR or NAND flash, then
you can use

the tools from the tools/env/ directory (fw_setenv / fw_printenv)."

*It is already stored in NOR Flash. This is not in a separate partition. Should it be in a separate partition?
Currently uboot.bin and environment variable are in mtd1 partition. Any problem? Should i create another partition for environment variables alone?

*2) I have downloaded these tools from* http://packages.debian.org/unstable/main/uboot-envtools *. I am not able to make it. I need to cross compile this for MIPS. Can u suggest me an url where i can get the stable and compilable src code.

Thanks
Rahanesh

Quoted 32 lines · Wolfgang Denk

Dear Rahanesh,

Quoted 2 lines · In message <[email protected]> you wrote:

Is it Possible from Linux to set an environment variable of u-Boot.?

If your environment is stored in NOR or NAND flash, then you can use the tools from the tools/env/ directory (fw_setenv / fw_printenv).

It should be trivial to adapt the code for other storage devices, too.

Quoted 3 lines

But after a successful download of new jffs and writing to mtd2 partition , How will Linux update the environment variable of U-boot?

Use fw_setenv.

Best regards,

Wolfgang Denk

--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de Any sufficiently advanced technology is indistinguishable from magic.
- Arthur C. Clarke

#3 lore raw

Dear Rahanesh,

Quoted 2 lines · In message <[email protected]> you wrote:

Thank you very much for the reply!!!

You are welcome.

Quoted 1 line

Few questions:

Hm... please do not top-post / full quote. Please make sure to read
http://www.netmeister.org/news/learn2quote.html

Quoted 7 lines

1) You said " If your environment is stored in NOR or NAND flash, then
you can use

the tools from the tools/env/ directory (fw_setenv / fw_printenv)."

*It is already stored in NOR Flash. This is not in a separate partition.
Should it be in a separate partition?

That's fine. A separate partition is not needed. the fw_*env tools can be easily configured for your setup.

Quoted 2 lines

Currently uboot.bin and environment variable are in mtd1 partition. Any
problem? Should i create another partition for environment variables alone?

No changes are necessary.

Quoted 4 lines

*2) I have downloaded these tools from*
http://packages.debian.org/unstable/main/uboot-envtools *. I am not able to make it. I need to cross compile this for MIPS. Can u suggest me an url where i can get the stable and compilable src code.

The tools come as part of the U-Boot source code. Please see
http://www.denx.de/wiki/U-Boot/SourceCode for details.

Best regards,

Wolfgang Denk

Signature · 5 lines
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
I'm a soldier, not a diplomat.  I can only tell the truth.
	-- Kirk, "Errand of Mercy", stardate 3198.9