pac7311: add comment about JPEG header
PATCH 1/1 pac7311: add comment about JPEG header
From: Márton Németh <[email protected]>
Add comment about the meaning of the fixed JPEG header bytes used to create each image.
The change was tested with Labtec Webcam 2200.
Signed-off-by Márton Németh <[email protected]>
---
drivers/media/video/gspca/pac7311.c +22 -3
@@ -801,13 +801,32 @@ static void do_autogain(struct gspca_dev sd->autogain_ignore_frames =PAC_AUTOGAIN_IGNORE_FRAMES ; } +/* JPEG header, part 1 */ static const unsigned char pac7311_jpeg_header1[] = { -0xff ,0xd8 ,0xff ,0xc0 ,0x00 ,0x11 ,0x08 +0xff ,0xd8 ,/* SOI: Start of Image */ + +0xff ,0xc0 ,/* SOF0: Start of Frame (Baseline DCT) */ +0x00 ,0x11 ,/* length = 17 bytes (including this length field) */ +0x08 /* Precision: 8 */ +/* 2 bytes is placed here: number of image lines */ +/* 2 bytes is placed here: samples per line */ }; +/* JPEG header, continued */ static const unsigned char pac7311_jpeg_header2[] = { -0x03 ,0x01 ,0x21 ,0x00 ,0x02 ,0x11 ,0x01 ,0x03 ,0x11 ,0x01 ,0xff ,0xda , -0x00 ,0x0c ,0x03 ,0x01 ,0x00 ,0x02 ,0x11 ,0x03 ,0x11 ,0x00 ,0x3f ,0x00 +0x03 ,/* Number of image components: 3 */ +0x01 ,0x21 ,0x00 ,/* ID=1, Subsampling 1x1, Quantization table: 0 */ +0x02 ,0x11 ,0x01 ,/* ID=2, Subsampling 2x1, Quantization table: 1 */ +0x03 ,0x11 ,0x01 ,/* ID=3, Subsampling 2x1, Quantization table: 1 */ + +0xff ,0xda ,/* SOS: Start Of Scan */ +0x00 ,0x0c ,/* length = 12 bytes (including this length field) */ +0x03 ,/* number of components: 3 */ +0x01 ,0x00 ,/* selector 1, table 0x00 */ +0x02 ,0x11 ,/* selector 2, table 0x11 */ +0x03 ,0x11 ,/* selector 3, table 0x11 */ +0x00 ,0x3f ,/* Spectral selection: 0 .. 63 */ +0x00 /* Successive approximation: 0 */ };/* this function is run at interrupt level */