stable kernel version
Hi,
I'm looking for an stable omap kernel, for an gumstix board. I tried the 2.6.30 and 2.6.31 git heads, but they both resulted in an unbootable system. Any advices, on which version to take ? Greetings
J. Machowinski
P.S.: Please answer directly to me, as I am not subscribed to the list
Quoted 6 lines · Janosch Machowinski
Hi,
I'm looking for an stable omap kernel, for an gumstix board. I tried the 2.6.30 and 2.6.31 git heads, but they both resulted in an unbootable system. Any advices, on which version to take ?
Starting with 2.6.31, the stable omap kernel latest released kernel from Linus. So 2.6.31 in this case.
Of course you may still need to patch in some things you need, like PM, EHCI and dspbridge.
What do you get when booting? Overo boots just fine for me.
At least CONFIG_MUSB had issues, you can see the details by checking out the omap-debug branch and enabling CONFIG_DEBUG_LL.
Regards,
Tony
Quoted 10 lines · Tony Lindgren
Quoted 7 lines · Janosch Machowinski
Hi,
I'm looking for an stable omap kernel, for an gumstix board. I tried the 2.6.30 and 2.6.31 git heads, but they both resulted in an unbootable system. Any advices, on which version to take ?
Quoted 7 lines
Starting with 2.6.31, the stable omap kernel latest released kernel from Linus. So 2.6.31 in this case.
Of course you may still need to patch in some things you need, like PM, EHCI and dspbridge.
What do you get when booting? Overo boots just fine for me.
Hi Tony,
the 2.6.30 head booted fine until the point where it waited for the SD-Card to get ready. There it just hung forever.
the 2.6.31 head crashed instantly after the uncompression of the kernel image.
I will try out the 2.6.31 mainline kernel tommorw.
Regards,
Janosch
Quoted 17 lines · Janosch Machowinski
Quoted 16 lines · Tony Lindgren
Quoted 7 lines · Janosch Machowinski
Hi,
I'm looking for an stable omap kernel, for an gumstix board. I tried the 2.6.30 and 2.6.31 git heads, but they both resulted in an unbootable system. Any advices, on which version to take ?Starting with 2.6.31, the stable omap kernel latest released kernel from Linus. So 2.6.31 in this case.
Of course you may still need to patch in some things you need, like PM, EHCI and dspbridge.
Quoted 7 lines
Quoted 1 line
What do you get when booting? Overo boots just fine for me.
Hi Tony,
the 2.6.30 head booted fine until the point where it waited for the SD-Card to get ready. There it just hung forever.
Hmm, 2.6.30 may not have all the core stuff in it yet.
Quoted 2 lines
the 2.6.31 head crashed instantly after the uncompression of the kernel image.
There are few patches still pending to get to mainline via other mailing lists, you can see them in omap-testing branch.
Quoted 1 line
I will try out the 2.6.31 mainline kernel tommorw.
OK, also I just pushed updated omap-debug branch that I forgot to rebase on top of current linux-omap master branch (Thanks Paul for letting me know!).
Tony
Quoted 19 lines · Tony Lindgren
Quoted 6 lines
Hi Tony,
the 2.6.30 head booted fine until the point where it waited for the SD-Card to get ready. There it just hung forever.
Hmm, 2.6.30 may not have all the core stuff in it yet.
Quoted 3 lines
the 2.6.31 head crashed instantly after the uncompression of the kernel image.
There are few patches still pending to get to mainline via other mailing lists, you can see them in omap-testing branch.
Quoted 10 lines
Quoted 2 lines
I will try out the 2.6.31 mainline kernel tommorw.
OK, also I just pushed updated omap-debug branch that I forgot to rebase on top of current linux-omap master branch (Thanks Paul for letting me know!).
Tony
I just realized, that I made myself not clear about the kernels I tested. I used omap-2.6.30 head and omap-2.6.31 head.
Janosch
Quoted 3 lines
Quoted 3 lines
I will try out the 2.6.31 mainline kernel tommorw.
I just tried 2.6.31.4 kernel from kernel.org same result as with the 2.6.31-omap head:
2271096 bytes read
Booting from mmc ...
## Booting kernel from Legacy Image at 82000000 ...
Image Name: Linux-2.6.31.4 Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 2271032 Bytes = 2.2 MB
Load Address: 80008000
Entry Point: 80008000
Verifying Checksum ... OK
Loading Kernel Image ... OK
OK
Starting kernel ...
Uncompressing Linux................................................................................................................................................ done, booting the kernel.
-- after this message it stops doing anything
Any ideas, what's wrong, or how to debug this ?
Regards
Janosch
Quoted 3 lines
Quoted 3 lines
I will try out the 2.6.31 mainline kernel tommorw.
I just tried 2.6.31.4 kernel from kernel.org same result as with the 2.6.31-omap head:
2271096 bytes read
Booting from mmc ...
## Booting kernel from Legacy Image at 82000000 ...
Image Name: Linux-2.6.31.4 Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 2271032 Bytes = 2.2 MB
Load Address: 80008000
Entry Point: 80008000
Verifying Checksum ... OK
Loading Kernel Image ... OK
OK
Starting kernel ...
Uncompressing Linux................................................................................................................................................ done, booting the kernel.
-- after this message it stops doing anything
Any ideas, what's wrong, or how to debug this ?
Regards
Janosch
Quoted 19 lines · Janosch Machowinski
Quoted 3 lines
Quoted 3 lines
I will try out the 2.6.31 mainline kernel tommorw.
I just tried 2.6.31.4 kernel from kernel.org same result as with the 2.6.31-omap head:
2271096 bytes read
Booting from mmc ...
## Booting kernel from Legacy Image at 82000000 ...Image Name: Linux-2.6.31.4 Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 2271032 Bytes = 2.2 MBLoad Address: 80008000
Entry Point: 80008000
Verifying Checksum ... OK
Loading Kernel Image ... OK
OKStarting kernel ...
Quoted 7 lines
Uncompressing Linux................................................................................................................................................ done, booting the kernel.
-- after this message it stops doing anything
Any ideas, what's wrong, or how to debug this ?
Can you try it with the omap-debug branch, and enable the CONFIG_DEBUG_LL option in your .config?
Tony
Quoted 19 lines · ext Janosch Machowinski
Quoted 3 lines
Quoted 3 lines
I will try out the 2.6.31 mainline kernel tommorw.
I just tried 2.6.31.4 kernel from kernel.org same result as with the 2.6.31-omap head:
2271096 bytes read
Booting from mmc ...
## Booting kernel from Legacy Image at 82000000 ...Image Name: Linux-2.6.31.4 Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 2271032 Bytes = 2.2 MBLoad Address: 80008000
Entry Point: 80008000
Verifying Checksum ... OK
Loading Kernel Image ... OK
OKStarting kernel ...
Quoted 7 lines
Uncompressing Linux................................................................................................................................................ done, booting the kernel.
-- after this message it stops doing anything
Any ideas, what's wrong, or how to debug this ?
DEBUG_LL often helps with problems at that point.
Phil
Signature · 2 lines
"They weren't designed to run on a computer, they were designed to run on a Powerpoint slide projector." -- Peter Gutmann
Quoted 6 lines
Can you try it with the omap-debug branch, and enable the
CONFIG_DEBUG_LLoption in your .config?Tony
This time I got some debug output, looks like
it crashed somewhere in the USB Code.
Deactivating the USB suspend option didn't help.
Any ideas how to debug this further / fix it ?
Attached you'll finde the debug output and my
kernel config.
Regards
Janosch
** Unable to read "boot.script" from mmc 0:1 **
reading uImage2
2324304 bytes read
Booting from mmc ...
## Booting kernel from Legacy Image at 82000000 ...
Image Name: Linux-2.6.32-rc5 Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 2324240 Bytes = 2.2 MB
Load Address: 80008000
Entry Point: 80008000
Verifying Checksum ... OK
Loading Kernel Image ... OK
OK
Starting kernel ...
Uncompressing Linux.................................................................................................................................................... done, booting the kernel. <5>Linux version 2.6.32-rc5 ([email protected]) (gcc version 4.3.2 (Debian 4.3.2-1.1) ) #1 Mon Oct 19 10:15:50 UTC 2009
CPU: ARMv7 Processor [411fc082] revision 2 (ARMv7), cr=10c53c7f
CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
Machine: Gumstix Overo
Memory policy: ECC disabled, Data cache writeback
<7>On node 0 totalpages: 65536
<7>free_area_init_node: node 0, pgdat c0489a08, node_mem_map c04a7000
<7> Normal zone: 512 pages used for memmap <7> Normal zone: 0 pages reserved <7> Normal zone: 65024 pages, LIFO batch:15
<6>OMAP3515 ES2.1
<6> - l2cache : Y<6> - iva : Y<6> - sgx : N<6> - neon : Y<6> - isp : Y<6>SRAM: Mapped pa 0x40200000 to va 0xfe400000 size: 0x100000 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 65024
<5>Kernel command line: console=ttyS2,115200n8 video=omapfb:vram:2M,vram:4M root=/dev/mmcblk0p2 rw rootfstype=ext3 rootwait <6>PID hash table entries: 1024 (order: 0, 4096 bytes)
<6>Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
<6>Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
<6>Memory: 128MB 128MB = 256MB total
<5>Memory: 254976KB available (4124K code, 337K data, 136K init, 0K highmem)
<6>Hierarchical RCU implementation.
<6>NR_IRQS:402
<7>powerdomain: completed transition in 0 loops
<7>powerdomain: registered wkup_pwrdm
<7>powerdomain: completed transition in 0 loops
<7>powerdomain: registered iva2_pwrdm
<7>powerdomain: completed transition in 0 loops
<7>powerdomain: registered mpu_pwrdm
<7>powerdomain: completed transition in 0 loops
<7>powerdomain: registered neon_pwrdm
<7>powerdomain: completed transition in 0 loops
<7>powerdomain: completed transition in 0 loops
<7>powerdomain: completed transition in 0 loops
<7>powerdomain: registered cam_pwrdm
<7>powerdomain: completed transition in 0 loops
<7>powerdomain: registered dss_pwrdm
<7>powerdomain: completed transition in 0 loops
<7>powerdomain: registered per_pwrdm
<7>powerdomain: completed transition in 0 loops
<7>powerdomain: registered emu_pwrdm
<7>powerdomain: completed transition in 0 loops
<7>powerdomain: completed transition in 0 loops
<7>powerdomain: completed transition in 0 loops
<7>powerdomain: registered dpll1_pwrdm
<7>powerdomain: completed transition in 0 loops
<7>powerdomain: registered dpll2_pwrdm
<7>powerdomain: completed transition in 0 loops
<7>powerdomain: registered dpll3_pwrdm
<7>powerdomain: completed transition in 0 loops
<7>powerdomain: registered dpll4_pwrdm
<7>powerdomain: completed transition in 0 loops
<7>powerdomain: completed transition in 0 loops
<7>powerdomain: associating clockdomain wkup_clkdm with powerdomain wkup_pwrdm
<7>clockdomain: registered wkup_clkdm
<3>clockdomain: cm_clkdm: powerdomain core_pwrdm does not exist
<7>powerdomain: associating clockdomain prm_clkdm with powerdomain wkup_pwrdm
<7>clockdomain: registered prm_clkdm
<7>powerdomain: associating clockdomain mpu_clkdm with powerdomain mpu_pwrdm
<7>clockdomain: registered mpu_clkdm
<7>powerdomain: associating clockdomain neon_clkdm with powerdomain neon_pwrdm
<7>clockdomain: registered neon_clkdm
<7>powerdomain: associating clockdomain iva2_clkdm with powerdomain iva2_pwrdm
<7>clockdomain: registered iva2_clkdm
<3>clockdomain: d2d_clkdm: powerdomain core_pwrdm does not exist
<3>clockdomain: core_l3_clkdm: powerdomain core_pwrdm does not exist
<3>clockdomain: core_l4_clkdm: powerdomain core_pwrdm does not exist
<7>powerdomain: associating clockdomain dss_clkdm with powerdomain dss_pwrdm
<7>clockdomain: registered dss_clkdm
<7>powerdomain: associating clockdomain cam_clkdm with powerdomain cam_pwrdm
<7>clockdomain: registered cam_clkdm
<7>powerdomain: associating clockdomain per_clkdm with powerdomain per_pwrdm
<7>clockdomain: registered per_clkdm
<7>powerdomain: associating clockdomain emu_clkdm with powerdomain emu_pwrdm
<7>clockdomain: registered emu_clkdm
<7>powerdomain: associating clockdomain dpll1_clkdm with powerdomain dpll1_pwrdm
<7>clockdomain: registered dpll1_clkdm
<7>powerdomain: associating clockdomain dpll2_clkdm with powerdomain dpll2_pwrdm
<7>clockdomain: registered dpll2_clkdm
<7>powerdomain: associating clockdomain dpll3_clkdm with powerdomain dpll3_pwrdm
<7>clockdomain: registered dpll3_clkdm
<7>powerdomain: associating clockdomain dpll4_clkdm with powerdomain dpll4_pwrdm
<7>clockdomain: registered dpll4_clkdm
<6>Clocking rate (Crystal/Core/MPU): 26.0/331/500 MHz
<7>clockdomain: clkdm dpll3_clkdm: clk dpll3_m2_ck now enabled
<7>clockdomain: dpll3_clkdm does not support forcing wakeup via software
<7>powerdomain: completed transition in 0 loops
<7>powerdomain: completed transition in 0 loops
<7>clockdomain: clkdm dpll4_clkdm: clk dpll4_m2x2_ck now enabled
<7>clockdomain: dpll4_clkdm does not support forcing wakeup via software
<7>powerdomain: completed transition in 0 loops
<7>powerdomain: completed transition in 0 loops
<7>clockdomain: clkdm per_clkdm: clk uart3_ick now enabled
<7>clockdomain: forcing wakeup on per_clkdm
<7>powerdomain: completed transition in 0 loops
<7>powerdomain: completed transition in 0 loops
<7>powerdomain: hardware cannot set/clear sleep dependency affecting mpu_pwrdm from mpu_pwrdm
<7>clockdomain: clkdm mpu_clkdm: clk arm_fck now enabled
<7>clockdomain: forcing wakeup on mpu_clkdm
<7>powerdomain: completed transition in 0 loops
<7>powerdomain: completed transition in 0 loops
<7>clockdomain: clkdm dpll1_clkdm: clk dpll1_x2m2_ck now enabled
<7>clockdomain: dpll1_clkdm does not support forcing wakeup via software
<7>powerdomain: completed transition in 0 loops
<7>powerdomain: completed transition in 0 loops
<7>powerdomain: hardware cannot set/clear sleep dependency affecting mpu_pwrdm from mpu_pwrdm
<7>clockdomain: clkdm dpll1_clkdm: clk dpll1_x2m2_ck now disabled
<7>clockdomain: dpll1_clkdm does not support forcing sleep via software
<7>powerdomain: completed transition in 0 loops
<7>clockdomain: clkdm mpu_clkdm: clk arm_fck now disabled
<7>clockdomain: mpu_clkdm does not support forcing sleep via software
<7>powerdomain: completed transition in 0 loops
<6>Reprogramming SDRC clock to 331882352 Hz
<6>GPMC revision 5.0
<6>IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts
<6>Total of 96 interrupts on 1 active controller
<7>clockdomain: clkdm wkup_clkdm: clk gpio1_ick now enabled
<7>clockdomain: wkup_clkdm does not support forcing wakeup via software
<7>powerdomain: completed transition in 0 loops
<7>powerdomain: completed transition in 0 loops
<6>OMAP GPIO hardware version 2.5
<6>OMAP clockevent source: GPTIMER1 at 32768 Hz
Console: colour dummy device 80x30
<6>Calibrating delay loop... <c>499.92 BogoMIPS (lpj=1949696)
Mount-cache hash table entries: 512
<6>CPU: Testing write buffer coherency: ok
<6>NET: Registered protocol family 16
<6>Found NAND on CS0
<6>Registering NAND on CS0
<4>MUX: setup H16_34XX_SDRC_CKE0 (0xfa002262): 0x0118 -> 0x0000
<4>MUX: setup H17_34XX_SDRC_CKE1 (0xfa002264): 0x0107 -> 0x0000
<6>OMAP DMA hardware revision 4.0
bio: create slab <bio-0> at 0
<5>SCSI subsystem initialized
<6>usbcore: registered new interface driver usbfs
<6>usbcore: registered new interface driver hub
<6>usbcore: registered new device driver usb
<6>i2c_omap i2c_omap.1: bus 1 rev3.12 at 2600 kHz
<6>twl4030: PIH (irq 7) chaining IRQs 368..375
<6>twl4030: power (irq 373) chaining IRQs 376..383
<6>twl4030: gpio (irq 368) chaining IRQs 384..401
<6>i2c_omap i2c_omap.3: bus 3 rev3.12 at 400 kHz
<6>Bluetooth: Core ver 2.15
<6>NET: Registered protocol family 31
<6>Bluetooth: HCI device and connection manager initialized
<6>Bluetooth: HCI socket layer initialized
<6>cfg80211: Using static regulatory domain info
<6>cfg80211: Regulatory domain: US
<6> (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) <6> (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm) <6> (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) <6> (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) <6> (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) <6> (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) <6> (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
<6>cfg80211: Calling CRDA for country: US
<6>Switching to clocksource 32k_counter
<6>musb_hdrc: version 6.0, musb-dma, host, debug=0
<3>HS USB OTG: no transceiver configured
<3>musb_hdrc musb_hdrc: musb_init_controller failed with status -19 <1>Unable to handle kernel NULL pointer dereference at virtual address 00000028 <1>pgd = c0004000
<1>[00000028] *pgd=00000000
<0>Internal error: Oops: 5 [#1]
<0>last sysfs file:
<d>Modules linked in:
CPU: 0 Not tainted (2.6.32-rc5 #1) PC is at musb_platform_suspend+0x40/0x88 LR is at musb_platform_suspend+0x3c/0x88 pc : [<c0236d08>] lr : [<c0236d04>] psr: a0000013
sp : cf821e20 ip : 00000064 fp : cf885950
r10: cf885800 r9 : c045cef0 r8 : c0479608
r7 : c045ced4 r6 : cf8858d0 r5 : cf8858d0 r4 : cf8858d0
r3 : c0459ca4 r2 : 00000000 r1 : fa0ab404 r0 : 00000000
Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel
Control: 10c5387d Table: 80004019 DAC: 00000017
<0>Process swapper (pid: 1, stack limit = 0xcf8202f0)
<0>Stack: (0xcf821e20 to 0xcf822000)
<0>1e20: cf8858d0 c0236d5c 00000000 c0236090 c040529e ffffffed c045cfb0 c001d894 <0>1e40: 00000000 00000000 00000001 ffffffff 00000000 00000002 cf8848c0 00000000 <0>1e60: cf8848c0 c045cef8 0000005c fa0ab000 c045ced4 c01a3714 cf884940 cf821ecc <0>1e80: cf884940 cf80d7a8 00000000 00000002 000003e0 c01a3714 00000004 cf884900 <0>1ea0: cf862d00 c00dd98c cf863968 cf809800 cf863848 c00ddc38 00000000 cf894fc8 <0>1ec0: cf894f68 c00ddd94 cf894fc8 00000000 cf821ef0 cf894f68 cf863968 00000001 <0>1ee0: 00000000 00000000 00000000 c00ded24 cf863968 00000000 00000000 c045cef8 <0>1f00: c045cef8 c048184c c048184c c0479608 00000000 00000000 00000000 c01d82f4 <0>1f20: c048184c c01d732c 00000000 c045cef8 c045cf2c c048184c cf821f50 c01d745c <0>1f40: 00000000 c01d73fc c048184c c01d6bac cf803af8 cf8451f0 c0479608 c0025774 <0>1f60: c048184c c048184c cf8959c0 c01d6450 c0364aa0 cf894158 cf86abc0 c0025774 <0>1f80: c0481838 c048184c 00000000 00000000 00000000 c01d7760 c0025774 c0481838 <0>1fa0: c001ccf0 00000000 00000000 c01d873c 00000000 c0025774 c0025a80 c002a344 <0>1fc0: 00000000 00000192 c046064c 00000000 00000000 c0025774 c0025a80 00000000 <0>1fe0: 00000000 c0008584 00000000 00000000 00000000 c002b900 847be504 0b7f7c09 [<c0236d08>] (musb_platform_suspend+0x40/0x88) from [<c0236d5c>] (musb_platform_exit+0xc/0x20) [<c0236d5c>] (musb_platform_exit+0xc/0x20) from [<c0236090>] (musb_free+0x84/0xbc) [<c0236090>] (musb_free+0x84/0xbc) from [<c001d894>] (musb_probe+0x9f0/0xb44) [<c001d894>] (musb_probe+0x9f0/0xb44) from [<c01d82f4>] (platform_drv_probe+0x1c/0x24) [<c01d82f4>] (platform_drv_probe+0x1c/0x24) from [<c01d732c>] (driver_probe_device+0xa4/0x174) [<c01d732c>] (driver_probe_device+0xa4/0x174) from [<c01d745c>] (__driver_attach+0x60/0x84) [<c01d745c>] (__driver_attach+0x60/0x84) from [<c01d6bac>] (bus_for_each_dev+0x4c/0x8c) [<c01d6bac>] (bus_for_each_dev+0x4c/0x8c) from [<c01d6450>] (bus_add_driver+0xa0/0x218) [<c01d6450>] (bus_add_driver+0xa0/0x218) from [<c01d7760>] (driver_register+0xbc/0x148) [<c01d7760>] (driver_register+0xbc/0x148) from [<c01d873c>] (platform_driver_probe+0x14/0x68) [<c01d873c>] (platform_driver_probe+0x14/0x68) from [<c002a344>] (do_one_initcall+0x5c/0x1bc) [<c002a344>] (do_one_initcall+0x5c/0x1bc) from [<c0008584>] (kernel_init+0x94/0x110) [<c0008584>] (kernel_init+0x94/0x110) from [<c002b900>] (kernel_thread_exit+0x0/0x8) <0>Code: e59f104c e3800004 ebf816ff e5940074 (e5903028)
<4>---[ end trace 1b75b31a2719ed1c ]---
<0>Kernel panic - not syncing: Attempted to kill init!
#
# Automatically generated make config: don't edit # Linux kernel version: 2.6.32-rc5
# Mon Oct 19 12:55:32 2009
#CONFIG_ARM=yCONFIG_SYS_SUPPORTS_APM_EMULATION=y CONFIG_GENERIC_GPIO=yCONFIG_GENERIC_TIME=yCONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_HARDIRQS_SW_RESEND=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_ARCH_HAS_CPUFREQ=yCONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_VECTORS_BASE=0xffff0000 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" CONFIG_CONSTRUCTORS=y
#
# General setup
#CONFIG_EXPERIMENTAL=yCONFIG_BROKEN_ON_SMP=yCONFIG_INIT_ENV_ARG_LIMIT=32CONFIG_LOCALVERSION=""CONFIG_LOCALVERSION_AUTO=yCONFIG_SWAP=yCONFIG_SYSVIPC=yCONFIG_SYSVIPC_SYSCTL=y
# CONFIG_POSIX_MQUEUE is not setCONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
#
# RCU Subsystem
#CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
# CONFIG_RCU_TRACE is not setCONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not setCONFIG_IKCONFIG=yCONFIG_IKCONFIG_PROC=yCONFIG_LOG_BUF_SHIFT=14
# CONFIG_GROUP_SCHED is not set
# CONFIG_CGROUPS is not setCONFIG_SYSFS_DEPRECATED=yCONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not setCONFIG_BLK_DEV_INITRD=yCONFIG_INITRAMFS_SOURCE=""CONFIG_RD_GZIP=y
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not setCONFIG_CC_OPTIMIZE_FOR_SIZE=yCONFIG_SYSCTL=yCONFIG_ANON_INODES=yCONFIG_EMBEDDED=yCONFIG_UID16=y
# CONFIG_SYSCTL_SYSCALL is not setCONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not setCONFIG_HOTPLUG=yCONFIG_PRINTK=yCONFIG_BUG=y
# CONFIG_ELF_CORE is not setCONFIG_BASE_FULL=yCONFIG_FUTEX=yCONFIG_EPOLL=yCONFIG_SIGNALFD=yCONFIG_TIMERFD=yCONFIG_EVENTFD=yCONFIG_SHMEM=yCONFIG_AIO=y
#
# Kernel Performance Events And Counters
#CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_COMPAT_BRK is not setCONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not setCONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not setCONFIG_HAVE_KPROBES=yCONFIG_HAVE_KRETPROBES=yCONFIG_HAVE_CLK=y
#
# GCOV-based kernel profiling
#CONFIG_SLOW_WORK=yCONFIG_HAVE_GENERIC_DMA_COHERENT=yCONFIG_SLABINFO=yCONFIG_RT_MUTEXES=yCONFIG_BASE_SMALL=0CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not setCONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not setCONFIG_MODULE_SRCVERSION_ALL=yCONFIG_BLOCK=y
# CONFIG_LBDAF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
#CONFIG_IOSCHED_NOOP=yCONFIG_IOSCHED_AS=yCONFIG_IOSCHED_DEADLINE=yCONFIG_IOSCHED_CFQ=yCONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not setCONFIG_DEFAULT_IOSCHED="anticipatory"CONFIG_FREEZER=y
#
# System Type
#CONFIG_MMU=y
# CONFIG_ARCH_AAEC2000 is not set
# CONFIG_ARCH_INTEGRATOR is not set
# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_AT91 is not set
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_GEMINI is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_EP93XX is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
# CONFIG_ARCH_MXC is not set
# CONFIG_ARCH_STMP3XXX is not set
# CONFIG_ARCH_NETX is not set
# CONFIG_ARCH_H720X is not set
# CONFIG_ARCH_NOMADIK is not set
# CONFIG_ARCH_IOP13XX is not set
# CONFIG_ARCH_IOP32X is not set
# CONFIG_ARCH_IOP33X is not set
# CONFIG_ARCH_IXP23XX is not set
# CONFIG_ARCH_IXP2000 is not set
# CONFIG_ARCH_IXP4XX is not set
# CONFIG_ARCH_L7200 is not set
# CONFIG_ARCH_KIRKWOOD is not set
# CONFIG_ARCH_LOKI is not set
# CONFIG_ARCH_MV78XX0 is not set
# CONFIG_ARCH_ORION5X is not set
# CONFIG_ARCH_MMP is not set
# CONFIG_ARCH_KS8695 is not set
# CONFIG_ARCH_NS9XXX is not set
# CONFIG_ARCH_W90X900 is not set
# CONFIG_ARCH_PNX4008 is not set
# CONFIG_ARCH_PXA is not set
# CONFIG_ARCH_MSM is not set
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
# CONFIG_ARCH_S3C2410 is not set
# CONFIG_ARCH_S3C64XX is not set
# CONFIG_ARCH_S5PC1XX is not set
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_LH7A40X is not set
# CONFIG_ARCH_U300 is not set
# CONFIG_ARCH_DAVINCI is not setCONFIG_ARCH_OMAP=y
# CONFIG_ARCH_BCMRING is not set
#
# TI OMAP Implementations
#CONFIG_ARCH_OMAP_OTG=y
# CONFIG_ARCH_OMAP1 is not set
# CONFIG_ARCH_OMAP2 is not setCONFIG_ARCH_OMAP3=y
# CONFIG_ARCH_OMAP4 is not set
#
# OMAP Feature Selections
#CONFIG_OMAP_DEBUG_POWERDOMAIN=yCONFIG_OMAP_DEBUG_CLOCKDOMAIN=y
# CONFIG_OMAP_RESET_CLOCKS is not setCONFIG_OMAP_MUX=y
# CONFIG_OMAP_MUX_DEBUG is not setCONFIG_OMAP_MUX_WARNINGS=yCONFIG_OMAP_MCBSP=y
# CONFIG_OMAP_MBOX_FWK is not set
# CONFIG_OMAP_MPU_TIMER is not setCONFIG_OMAP_32K_TIMER=yCONFIG_OMAP_32K_TIMER_HZ=128CONFIG_OMAP_DM_TIMER=y
# CONFIG_OMAP_LL_DEBUG_UART1 is not set
# CONFIG_OMAP_LL_DEBUG_UART2 is not setCONFIG_OMAP_LL_DEBUG_UART3=y
# CONFIG_OMAP_PM_NONE is not setCONFIG_OMAP_PM_NOOP=yCONFIG_ARCH_OMAP34XX=yCONFIG_ARCH_OMAP3430=y
#
# OMAP Board Type
#
# CONFIG_MACH_OMAP3_BEAGLE is not set
# CONFIG_MACH_OMAP_LDP is not setCONFIG_MACH_OVERO=y
# CONFIG_MACH_OMAP3EVM is not set
# CONFIG_MACH_OMAP3_PANDORA is not set
# CONFIG_MACH_OMAP_3430SDP is not set
# CONFIG_MACH_NOKIA_RX51 is not set
# CONFIG_MACH_OMAP_ZOOM2 is not set
#
# Processor Type
#CONFIG_CPU_32=y
CONFIG_CPU_32v6K=yCONFIG_CPU_V7=y
CONFIG_CPU_32v7=yCONFIG_CPU_ABRT_EV7=yCONFIG_CPU_PABRT_V7=yCONFIG_CPU_CACHE_V7=yCONFIG_CPU_CACHE_VIPT=yCONFIG_CPU_COPY_V6=yCONFIG_CPU_TLB_V7=yCONFIG_CPU_HAS_ASID=yCONFIG_CPU_CP15=yCONFIG_CPU_CP15_MMU=y
#
# Processor Features
#CONFIG_ARM_THUMB=yCONFIG_ARM_THUMBEE=y
# CONFIG_CPU_ICACHE_DISABLE is not set
# CONFIG_CPU_DCACHE_DISABLE is not set
# CONFIG_CPU_BPREDICT_DISABLE is not setCONFIG_HAS_TLS_REG=yCONFIG_ARM_L1_CACHE_SHIFT=6
# CONFIG_ARM_ERRATA_430973 is not set
# CONFIG_ARM_ERRATA_458693 is not set
# CONFIG_ARM_ERRATA_460075 is not setCONFIG_COMMON_CLKDEV=y
#
# Bus support
#
# CONFIG_PCI_SYSCALL is not set
# CONFIG_ARCH_SUPPORTS_MSI is not set
# CONFIG_PCCARD is not set
#
# Kernel Features
#CONFIG_TICK_ONESHOT=yCONFIG_NO_HZ=yCONFIG_HIGH_RES_TIMERS=yCONFIG_GENERIC_CLOCKEVENTS_BUILD=yCONFIG_VMSPLIT_3G=y
# CONFIG_VMSPLIT_2G is not set
# CONFIG_VMSPLIT_1G is not setCONFIG_PAGE_OFFSET=0xC0000000CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not setCONFIG_HZ=128
# CONFIG_THUMB2_KERNEL is not setCONFIG_AEABI=y
# CONFIG_OABI_COMPAT is not set
# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
# CONFIG_HIGHMEM is not setCONFIG_SELECT_MEMORY_MODEL=yCONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not setCONFIG_FLATMEM=yCONFIG_FLAT_NODE_MEM_MAP=yCONFIG_PAGEFLAGS_EXTENDED=yCONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_PHYS_ADDR_T_64BIT is not setCONFIG_ZONE_DMA_FLAG=0CONFIG_VIRT_TO_BUS=yCONFIG_HAVE_MLOCK=yCONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not setCONFIG_DEFAULT_MMAP_MIN_ADDR=4096CONFIG_LEDS=yCONFIG_ALIGNMENT_TRAP=y
# CONFIG_UACCESS_WITH_MEMCPY is not set
#
# Boot options
#CONFIG_ZBOOT_ROM_TEXT=0x0CONFIG_ZBOOT_ROM_BSS=0x0CONFIG_CMDLINE=" debug "
# CONFIG_XIP_KERNEL is not setCONFIG_KEXEC=yCONFIG_ATAGS_PROC=y
#
# CPU Power Management
#CONFIG_CPU_FREQ=yCONFIG_CPU_FREQ_TABLE=y
# CONFIG_CPU_FREQ_DEBUG is not set CONFIG_CPU_FREQ_STAT=y CONFIG_CPU_FREQ_STAT_DETAILS=y CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set CONFIG_CPU_FREQ_GOV_USERSPACE=y CONFIG_CPU_FREQ_GOV_ONDEMAND=y CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
# CONFIG_CPU_IDLE is not set
#
# Floating point emulation
#
#
# At least one emulation must be selected
#CONFIG_VFP=y
CONFIG_VFPv3=yCONFIG_NEON=y
#
# Userspace binary formats
#CONFIG_BINFMT_ELF=yCONFIG_HAVE_AOUT=yCONFIG_BINFMT_AOUT=mCONFIG_BINFMT_MISC=y
#
# Power management options
#CONFIG_PM=y
# CONFIG_PM_DEBUG is not setCONFIG_PM_SLEEP=yCONFIG_SUSPEND=yCONFIG_SUSPEND_FREEZER=y
# CONFIG_APM_EMULATION is not set
# CONFIG_PM_RUNTIME is not setCONFIG_ARCH_SUSPEND_POSSIBLE=yCONFIG_NET=y
#
# Networking options
#CONFIG_PACKET=yCONFIG_PACKET_MMAP=yCONFIG_UNIX=yCONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
# CONFIG_XFRM_STATISTICS is not set CONFIG_NET_KEY=y
# CONFIG_NET_KEY_MIGRATE is not set CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set CONFIG_IP_FIB_HASH=yCONFIG_IP_PNP=yCONFIG_IP_PNP_DHCP=yCONFIG_IP_PNP_BOOTP=yCONFIG_IP_PNP_RARP=y
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set CONFIG_INET_TUNNEL=m CONFIG_INET_XFRM_MODE_TRANSPORT=y CONFIG_INET_XFRM_MODE_TUNNEL=y CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_LRO is not set CONFIG_INET_DIAG=yCONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not setCONFIG_IPV6=m
# CONFIG_IPV6_PRIVACY is not set
# CONFIG_IPV6_ROUTER_PREF is not set
# CONFIG_IPV6_OPTIMISTIC_DAD is not set
# CONFIG_INET6_AH is not set
# CONFIG_INET6_ESP is not set
# CONFIG_INET6_IPCOMP is not set
# CONFIG_IPV6_MIP6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set CONFIG_INET6_XFRM_MODE_TRANSPORT=m CONFIG_INET6_XFRM_MODE_TUNNEL=m CONFIG_INET6_XFRM_MODE_BEET=m
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set CONFIG_IPV6_SIT=m CONFIG_IPV6_NDISC_NODETYPE=y
# CONFIG_IPV6_TUNNEL is not set
# CONFIG_IPV6_MULTIPLE_TABLES is not set
# CONFIG_IPV6_MROUTE is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not setCONFIG_BT=yCONFIG_BT_L2CAP=yCONFIG_BT_SCO=yCONFIG_BT_RFCOMM=yCONFIG_BT_RFCOMM_TTY=yCONFIG_BT_BNEP=yCONFIG_BT_BNEP_MC_FILTER=yCONFIG_BT_BNEP_PROTO_FILTER=yCONFIG_BT_HIDP=y
#
# Bluetooth device drivers
#
# CONFIG_BT_HCIBTUSB is not set
# CONFIG_BT_HCIBTSDIO is not setCONFIG_BT_HCIUART=yCONFIG_BT_HCIUART_H4=yCONFIG_BT_HCIUART_BCSP=y
# CONFIG_BT_HCIUART_LL is not setCONFIG_BT_HCIBCM203X=yCONFIG_BT_HCIBPA10X=y
# CONFIG_BT_HCIBFUSB is not set
# CONFIG_BT_HCIVHCI is not set
# CONFIG_BT_MRVL is not set
# CONFIG_AF_RXRPC is not setCONFIG_WIRELESS=yCONFIG_CFG80211=y
# CONFIG_NL80211_TESTMODE is not set
# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
# CONFIG_CFG80211_REG_DEBUG is not setCONFIG_CFG80211_DEFAULT_PS=yCONFIG_CFG80211_DEFAULT_PS_VALUE=1CONFIG_WIRELESS_OLD_REGULATORY=yCONFIG_WIRELESS_EXT=yCONFIG_WIRELESS_EXT_SYSFS=yCONFIG_LIB80211=mCONFIG_LIB80211_CRYPT_WEP=mCONFIG_LIB80211_CRYPT_CCMP=mCONFIG_LIB80211_CRYPT_TKIP=m
# CONFIG_LIB80211_DEBUG is not setCONFIG_MAC80211=yCONFIG_MAC80211_RC_PID=y
# CONFIG_MAC80211_RC_MINSTREL is not setCONFIG_MAC80211_RC_DEFAULT_PID=y
# CONFIG_MAC80211_RC_DEFAULT_MINSTREL is not setCONFIG_MAC80211_RC_DEFAULT="pid"
# CONFIG_MAC80211_MESH is not setCONFIG_MAC80211_LEDS=y
# CONFIG_MAC80211_DEBUG_MENU is not set
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
#
# Device Drivers
#
#
# Generic Driver Options
#CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_DEVTMPFS is not setCONFIG_STANDALONE=yCONFIG_PREVENT_FIRMWARE_BUILD=yCONFIG_FW_LOADER=yCONFIG_FIRMWARE_IN_KERNEL=yCONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not setCONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
# CONFIG_MTD_TESTS is not setCONFIG_MTD_CONCAT=yCONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
# CONFIG_MTD_AFS_PARTS is not set
# CONFIG_MTD_AR7_PARTS is not set
#
# User Modules And Translation Layers
#CONFIG_MTD_CHAR=yCONFIG_MTD_BLKDEVS=yCONFIG_MTD_BLOCK=y
# CONFIG_FTL is not set
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
# CONFIG_SSFDC is not set
# CONFIG_MTD_OOPS is not set
#
# RAM/ROM/Flash chip drivers
#
# CONFIG_MTD_CFI is not set
# CONFIG_MTD_JEDECPROBE is not setCONFIG_MTD_MAP_BANK_WIDTH_1=yCONFIG_MTD_MAP_BANK_WIDTH_2=yCONFIG_MTD_MAP_BANK_WIDTH_4=y
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not setCONFIG_MTD_CFI_I1=yCONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
# CONFIG_MTD_RAM is not set
# CONFIG_MTD_ROM is not set
# CONFIG_MTD_ABSENT is not set
#
# Mapping drivers for chip access
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
# CONFIG_MTD_PLATRAM is not set
#
# Self-contained MTD device drivers
#
# CONFIG_MTD_DATAFLASH is not set
# CONFIG_MTD_M25P80 is not set
# CONFIG_MTD_SST25L is not set
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set
# CONFIG_MTD_BLOCK2MTD is not set
#
# Disk-On-Chip Device Drivers
#
# CONFIG_MTD_DOC2000 is not set
# CONFIG_MTD_DOC2001 is not set
# CONFIG_MTD_DOC2001PLUS is not setCONFIG_MTD_NAND=y
# CONFIG_MTD_NAND_VERIFY_WRITE is not set
# CONFIG_MTD_NAND_ECC_SMC is not set
# CONFIG_MTD_NAND_MUSEUM_IDS is not set
# CONFIG_MTD_NAND_GPIO is not setCONFIG_MTD_NAND_OMAP2=yCONFIG_MTD_NAND_OMAP_PREFETCH=yCONFIG_MTD_NAND_OMAP_PREFETCH_DMA=yCONFIG_MTD_NAND_IDS=y
# CONFIG_MTD_NAND_DISKONCHIP is not set
# CONFIG_MTD_NAND_NANDSIM is not set
# CONFIG_MTD_NAND_PLATFORM is not set
# CONFIG_MTD_ALAUDA is not set
# CONFIG_MTD_ONENAND is not set
#
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
#
# UBI - Unsorted block images
#
# CONFIG_MTD_UBI is not set
# CONFIG_PARPORT is not setCONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_COW_COMMON is not setCONFIG_BLK_DEV_LOOP=yCONFIG_BLK_DEV_CRYPTOLOOP=m
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_UB is not setCONFIG_BLK_DEV_RAM=yCONFIG_BLK_DEV_RAM_COUNT=16CONFIG_BLK_DEV_RAM_SIZE=16384
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not setCONFIG_MG_DISK=yCONFIG_MG_DISK_RES=0
# CONFIG_MISC_DEVICES is not setCONFIG_EEPROM_93CX6=yCONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not setCONFIG_SCSI=yCONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not setCONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not setCONFIG_CHR_DEV_SG=y
# CONFIG_CHR_DEV_SCH is not setCONFIG_SCSI_MULTI_LUN=y
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not setCONFIG_SCSI_WAIT_SCAN=m
#
# SCSI Transports
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not setCONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_LIBFC is not set
# CONFIG_LIBFCOE is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
# CONFIG_ATA is not set
# CONFIG_MD is not setCONFIG_NETDEVICES=yCONFIG_DUMMY=m
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not setCONFIG_TUN=m
# CONFIG_VETH is not setCONFIG_PHYLIB=y
#
# MII PHY device drivers
#
# CONFIG_MARVELL_PHY is not set
# CONFIG_DAVICOM_PHY is not set
# CONFIG_QSEMI_PHY is not set
# CONFIG_LXT_PHY is not set
# CONFIG_CICADA_PHY is not set
# CONFIG_VITESSE_PHY is not set
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_REALTEK_PHY is not set
# CONFIG_NATIONAL_PHY is not set
# CONFIG_STE10XP is not set
# CONFIG_LSI_ET1011C_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=yCONFIG_MII=y
# CONFIG_AX88796 is not set
# CONFIG_SMC91X is not set
# CONFIG_DM9000 is not set
# CONFIG_ENC28J60 is not set
# CONFIG_ETHOC is not set
# CONFIG_SMC911X is not set CONFIG_SMSC911X=y
# CONFIG_DNET is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set
# CONFIG_KS8842 is not set
# CONFIG_KS8851 is not set
# CONFIG_KS8851_MLL is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set CONFIG_WLAN=y
# CONFIG_WLAN_PRE80211 is not set CONFIG_WLAN_80211=yCONFIG_LIBERTAS=mCONFIG_LIBERTAS_USB=m CONFIG_LIBERTAS_SDIO=m
# CONFIG_LIBERTAS_SPI is not set CONFIG_LIBERTAS_DEBUG=y
# CONFIG_LIBERTAS_THINFIRM is not set
# CONFIG_AT76C50X_USB is not set CONFIG_USB_ZD1201=m CONFIG_USB_NET_RNDIS_WLAN=m CONFIG_RTL8187=yCONFIG_RTL8187_LEDS=y
# CONFIG_MAC80211_HWSIM is not set CONFIG_P54_COMMON=mCONFIG_P54_USB=m
# CONFIG_P54_SPI is not set CONFIG_P54_LEDS=y
# CONFIG_ATH_COMMON is not set CONFIG_HOSTAP=mCONFIG_HOSTAP_FIRMWARE=y CONFIG_HOSTAP_FIRMWARE_NVRAM=y
# CONFIG_B43 is not set
# CONFIG_B43LEGACY is not set CONFIG_ZD1211RW=m
# CONFIG_ZD1211RW_DEBUG is not set CONFIG_RT2X00=mCONFIG_RT2500USB=mCONFIG_RT73USB=mCONFIG_RT2800USB=mCONFIG_RT2X00_LIB_USB=m CONFIG_RT2X00_LIB=mCONFIG_RT2X00_LIB_HT=y CONFIG_RT2X00_LIB_FIRMWARE=y CONFIG_RT2X00_LIB_CRYPTO=y CONFIG_RT2X00_LIB_LEDS=y
# CONFIG_RT2X00_DEBUG is not set CONFIG_WL12XX=m
# CONFIG_WL1251 is not set
# CONFIG_WL1271 is not set
# CONFIG_IWM is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers #
#
# USB Network Adapters
#CONFIG_USB_CATC=mCONFIG_USB_KAWETH=mCONFIG_USB_PEGASUS=mCONFIG_USB_RTL8150=mCONFIG_USB_USBNET=yCONFIG_USB_NET_AX8817X=yCONFIG_USB_NET_CDCETHER=y
# CONFIG_USB_NET_CDC_EEM is not setCONFIG_USB_NET_DM9601=m
# CONFIG_USB_NET_SMSC95XX is not setCONFIG_USB_NET_GL620A=mCONFIG_USB_NET_NET1080=mCONFIG_USB_NET_PLUSB=mCONFIG_USB_NET_MCS7830=yCONFIG_USB_NET_RNDIS_HOST=mCONFIG_USB_NET_CDC_SUBSET=mCONFIG_USB_ALI_M5632=yCONFIG_USB_AN2720=yCONFIG_USB_BELKIN=yCONFIG_USB_ARMLINUX=yCONFIG_USB_EPSON2888=yCONFIG_USB_KC2190=yCONFIG_USB_NET_ZAURUS=m
# CONFIG_USB_NET_INT51X1 is not set
# CONFIG_WAN is not setCONFIG_PPP=m
# CONFIG_PPP_MULTILINK is not set
# CONFIG_PPP_FILTER is not setCONFIG_PPP_ASYNC=mCONFIG_PPP_SYNC_TTY=mCONFIG_PPP_DEFLATE=mCONFIG_PPP_BSDCOMP=mCONFIG_PPP_MPPE=mCONFIG_PPPOE=m
# CONFIG_PPPOL2TP is not set
# CONFIG_SLIP is not setCONFIG_SLHC=m
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
#
# Input device support
#CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not setCONFIG_INPUT_POLLDEV=m
#
# Userland interfaces
#CONFIG_INPUT_MOUSEDEV=yCONFIG_INPUT_MOUSEDEV_PSAUX=yCONFIG_INPUT_MOUSEDEV_SCREEN_X=1024CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768CONFIG_INPUT_JOYDEV=yCONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADP5588 is not set
# CONFIG_KEYBOARD_ATKBD is not set
# CONFIG_QT2160 is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_GPIO is not set
# CONFIG_KEYBOARD_MATRIX is not set
# CONFIG_KEYBOARD_LM8323 is not set
# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_TWL4030 is not set
# CONFIG_KEYBOARD_XTKBD is not setCONFIG_INPUT_MOUSE=yCONFIG_MOUSE_PS2=yCONFIG_MOUSE_PS2_ALPS=yCONFIG_MOUSE_PS2_LOGIPS2PP=yCONFIG_MOUSE_PS2_SYNAPTICS=yCONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_SENTELIC is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_BCM5974 is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_MOUSE_GPIO is not set
# CONFIG_MOUSE_SYNAPTICS_I2C is not setCONFIG_INPUT_JOYSTICK=y
# CONFIG_JOYSTICK_ANALOG is not set
# CONFIG_JOYSTICK_A3D is not set
# CONFIG_JOYSTICK_ADI is not set
# CONFIG_JOYSTICK_COBRA is not set
# CONFIG_JOYSTICK_GF2K is not set
# CONFIG_JOYSTICK_GRIP is not set
# CONFIG_JOYSTICK_GRIP_MP is not set
# CONFIG_JOYSTICK_GUILLEMOT is not set
# CONFIG_JOYSTICK_INTERACT is not set
# CONFIG_JOYSTICK_SIDEWINDER is not set
# CONFIG_JOYSTICK_TMDC is not set
# CONFIG_JOYSTICK_IFORCE is not set
# CONFIG_JOYSTICK_WARRIOR is not set
# CONFIG_JOYSTICK_MAGELLAN is not set
# CONFIG_JOYSTICK_SPACEORB is not set
# CONFIG_JOYSTICK_SPACEBALL is not set
# CONFIG_JOYSTICK_STINGER is not set
# CONFIG_JOYSTICK_TWIDJOY is not set
# CONFIG_JOYSTICK_ZHENHUA is not set
# CONFIG_JOYSTICK_JOYDUMP is not set
# CONFIG_JOYSTICK_XPAD is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Hardware I/O ports
#CONFIG_SERIO=yCONFIG_SERIO_SERPORT=yCONFIG_SERIO_LIBPS2=yCONFIG_SERIO_RAW=y
# CONFIG_GAMEPORT is not set
#
# Character devices
#CONFIG_VT=yCONFIG_CONSOLE_TRANSLATIONS=yCONFIG_VT_CONSOLE=yCONFIG_HW_CONSOLE=yCONFIG_VT_HW_CONSOLE_BINDING=yCONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Serial drivers
#CONFIG_SERIAL_8250=yCONFIG_SERIAL_8250_CONSOLE=yCONFIG_SERIAL_8250_NR_UARTS=32CONFIG_SERIAL_8250_RUNTIME_UARTS=4CONFIG_SERIAL_8250_EXTENDED=yCONFIG_SERIAL_8250_MANY_PORTS=yCONFIG_SERIAL_8250_SHARE_IRQ=yCONFIG_SERIAL_8250_DETECT_IRQ=yCONFIG_SERIAL_8250_RSA=y
#
# Non-8250 serial port support
#
# CONFIG_SERIAL_MAX3100 is not setCONFIG_SERIAL_CORE=yCONFIG_SERIAL_CORE_CONSOLE=yCONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
# CONFIG_IPMI_HANDLER is not setCONFIG_HW_RANDOM=yCONFIG_HW_RANDOM_TIMERIOMEM=y
# CONFIG_R3964 is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not setCONFIG_I2C=yCONFIG_I2C_BOARDINFO=yCONFIG_I2C_COMPAT=yCONFIG_I2C_CHARDEV=yCONFIG_I2C_HELPER_AUTO=y
#
# I2C Hardware Bus support
#
#
# I2C system bus drivers (mostly embedded / system-on-chip) #
# CONFIG_I2C_DESIGNWARE is not set
# CONFIG_I2C_GPIO is not set
# CONFIG_I2C_OCORES is not setCONFIG_I2C_OMAP=y
# CONFIG_I2C_SIMTEC is not set
#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set
#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_STUB is not set
#
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not setCONFIG_SPI=y
# CONFIG_SPI_DEBUG is not setCONFIG_SPI_MASTER=y
#
# SPI Master Controller Drivers
#
# CONFIG_SPI_BITBANG is not set
# CONFIG_SPI_GPIO is not setCONFIG_SPI_OMAP24XX=y
#
# SPI Protocol Masters
#
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set
#
# PPS support
#
# CONFIG_PPS is not setCONFIG_ARCH_REQUIRE_GPIOLIB=yCONFIG_GPIOLIB=y
# CONFIG_DEBUG_GPIO is not setCONFIG_GPIO_SYSFS=y
#
# Memory mapped GPIO expanders:
#
#
# I2C GPIO expanders:
#CONFIG_GPIO_MAX732X=mCONFIG_GPIO_PCA953X=mCONFIG_GPIO_PCF857X=mCONFIG_GPIO_TWL4030=y
#
# PCI GPIO expanders:
#
#
# SPI GPIO expanders:
#CONFIG_GPIO_MAX7301=mCONFIG_GPIO_MCP23S08=m
# CONFIG_GPIO_MC33880 is not set
#
# AC97 GPIO expanders:
#
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not setCONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Native drivers
#
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADCXX is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7473 is not set
# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM70 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4245 is not set
# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_MAX1111 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_SHT15 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_TMP421 is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_SENSORS_LIS3_SPI is not setCONFIG_THERMAL=y
# CONFIG_THERMAL_HWMON is not setCONFIG_WATCHDOG=yCONFIG_WATCHDOG_NOWAYOUT=y
#
# Watchdog Device Drivers
#
# CONFIG_SOFT_WATCHDOG is not setCONFIG_OMAP_WATCHDOG=y
# CONFIG_TWL4030_WATCHDOG is not set
#
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not setCONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
# CONFIG_SSB is not set
#
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_MFD_ASIC3 is not set
# CONFIG_HTC_EGPIO is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_TPS65010 is not setCONFIG_TWL4030_CORE=y
# CONFIG_TWL4030_POWER is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_MFD_T7L66XB is not set
# CONFIG_MFD_TC6387XB is not set
# CONFIG_MFD_TC6393XB is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_MFD_MC13783 is not set
# CONFIG_AB3100_CORE is not set
# CONFIG_EZX_PCAP is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
#
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
# CONFIG_FB is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Display device support
#CONFIG_DISPLAY_SUPPORT=y
#
# Display hardware drivers
#
#
# Console display driver support
#
# CONFIG_VGA_CONSOLE is not setCONFIG_DUMMY_CONSOLE=y
# CONFIG_SOUND is not setCONFIG_HID_SUPPORT=yCONFIG_HID=y
# CONFIG_HIDRAW is not set
#
# USB Input Devices
#CONFIG_USB_HID=y
# CONFIG_HID_PID is not set
# CONFIG_USB_HIDDEV is not set
#
# Special HID drivers
#CONFIG_HID_A4TECH=yCONFIG_HID_APPLE=yCONFIG_HID_BELKIN=yCONFIG_HID_CHERRY=yCONFIG_HID_CHICONY=yCONFIG_HID_CYPRESS=y
# CONFIG_HID_DRAGONRISE is not setCONFIG_HID_EZKEY=y
# CONFIG_HID_KYE is not setCONFIG_HID_GYRATION=y
# CONFIG_HID_TWINHAN is not set
# CONFIG_HID_KENSINGTON is not setCONFIG_HID_LOGITECH=y
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not setCONFIG_HID_MICROSOFT=yCONFIG_HID_MONTEREY=y
# CONFIG_HID_NTRIG is not setCONFIG_HID_PANTHERLORD=y
# CONFIG_PANTHERLORD_FF is not setCONFIG_HID_PETALYNX=yCONFIG_HID_SAMSUNG=yCONFIG_HID_SONY=yCONFIG_HID_SUNPLUS=y
# CONFIG_HID_GREENASIA is not set
# CONFIG_HID_SMARTJOYPLUS is not set
# CONFIG_HID_TOPSEED is not set
# CONFIG_HID_THRUSTMASTER is not set
# CONFIG_HID_WACOM is not set
# CONFIG_HID_ZEROPLUS is not setCONFIG_USB_SUPPORT=yCONFIG_USB_ARCH_HAS_HCD=yCONFIG_USB_ARCH_HAS_OHCI=yCONFIG_USB_ARCH_HAS_EHCI=yCONFIG_USB=yCONFIG_USB_DEBUG=yCONFIG_USB_ANNOUNCE_NEW_DEVICES=y
#
# Miscellaneous USB options
#CONFIG_USB_DEVICEFS=yCONFIG_USB_DEVICE_CLASS=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_OTG is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not setCONFIG_USB_MON=y
# CONFIG_USB_WUSB is not set
# CONFIG_USB_WUSB_CBAF is not set
#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
# CONFIG_USB_EHCI_HCD is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
# CONFIG_USB_ISP1362_HCD is not set
# CONFIG_USB_OHCI_HCD is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_HWA_HCD is not setCONFIG_USB_MUSB_HDRC=yCONFIG_USB_MUSB_SOC=y
#
# OMAP 343x high speed USB support
#CONFIG_USB_MUSB_HOST=y
# CONFIG_USB_MUSB_PERIPHERAL is not set
# CONFIG_USB_MUSB_OTG is not setCONFIG_USB_MUSB_HDRC_HCD=y
# CONFIG_MUSB_PIO_ONLY is not setCONFIG_USB_INVENTRA_DMA=y
# CONFIG_USB_TI_CPPI_DMA is not set
# CONFIG_USB_MUSB_DEBUG is not set
#
# USB Device Class drivers
#CONFIG_USB_ACM=m
# CONFIG_USB_PRINTER is not setCONFIG_USB_WDM=y
# CONFIG_USB_TMC is not set
#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may #
#
# also be needed; see USB_STORAGE Help for more info # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set # CONFIG_USB_STORAGE_ISD200 is not set # CONFIG_USB_STORAGE_USBAT is not set # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set # CONFIG_USB_STORAGE_ALAUDA is not set # CONFIG_USB_STORAGE_ONETOUCH is not set # CONFIG_USB_STORAGE_KARMA is not set # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_LIBUSUAL is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
#
# USB port drivers
#CONFIG_USB_SERIAL=y
# CONFIG_USB_SERIAL_CONSOLE is not set
# CONFIG_USB_EZUSB is not setCONFIG_USB_SERIAL_GENERIC=y
# CONFIG_USB_SERIAL_AIRCABLE is not set
# CONFIG_USB_SERIAL_ARK3116 is not set
# CONFIG_USB_SERIAL_BELKIN is not set
# CONFIG_USB_SERIAL_CH341 is not set
# CONFIG_USB_SERIAL_WHITEHEAT is not set
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
# CONFIG_USB_SERIAL_CP210X is not set
# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
# CONFIG_USB_SERIAL_EMPEG is not setCONFIG_USB_SERIAL_FTDI_SIO=y
# CONFIG_USB_SERIAL_FUNSOFT is not set
# CONFIG_USB_SERIAL_VISOR is not set
# CONFIG_USB_SERIAL_IPAQ is not set
# CONFIG_USB_SERIAL_IR is not set
# CONFIG_USB_SERIAL_EDGEPORT is not set
# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
# CONFIG_USB_SERIAL_GARMIN is not set
# CONFIG_USB_SERIAL_IPW is not set
# CONFIG_USB_SERIAL_IUU is not set
# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
# CONFIG_USB_SERIAL_KEYSPAN is not set
# CONFIG_USB_SERIAL_KLSI is not set
# CONFIG_USB_SERIAL_KOBIL_SCT is not set
# CONFIG_USB_SERIAL_MCT_U232 is not set
# CONFIG_USB_SERIAL_MOS7720 is not set
# CONFIG_USB_SERIAL_MOS7840 is not set
# CONFIG_USB_SERIAL_MOTOROLA is not set
# CONFIG_USB_SERIAL_NAVMAN is not setCONFIG_USB_SERIAL_PL2303=y
# CONFIG_USB_SERIAL_OTI6858 is not set
# CONFIG_USB_SERIAL_QUALCOMM is not set
# CONFIG_USB_SERIAL_SPCP8X5 is not set
# CONFIG_USB_SERIAL_HP4X is not set
# CONFIG_USB_SERIAL_SAFE is not set
# CONFIG_USB_SERIAL_SIEMENS_MPI is not set
# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
# CONFIG_USB_SERIAL_SYMBOL is not set
# CONFIG_USB_SERIAL_TI is not set
# CONFIG_USB_SERIAL_CYBERJACK is not set
# CONFIG_USB_SERIAL_XIRCOM is not set
# CONFIG_USB_SERIAL_OPTION is not set
# CONFIG_USB_SERIAL_OMNINET is not set
# CONFIG_USB_SERIAL_OPTICON is not set
# CONFIG_USB_SERIAL_DEBUG is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_BERRY_CHARGE is not setCONFIG_USB_LED=m
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
#
# OTG and related infrastructure
#CONFIG_USB_OTG_UTILS=y
# CONFIG_USB_GPIO_VBUS is not set
# CONFIG_ISP1301_OMAP is not set
# CONFIG_NOP_USB_XCEIV is not setCONFIG_MMC=y
# CONFIG_MMC_DEBUG is not set
# CONFIG_MMC_UNSAFE_RESUME is not set
#
# MMC/SD/SDIO Card Drivers
#CONFIG_MMC_BLOCK=yCONFIG_MMC_BLOCK_BOUNCE=yCONFIG_SDIO_UART=y
# CONFIG_MMC_TEST is not set
#
# MMC/SD/SDIO Host Controller Drivers
#CONFIG_MMC_SDHCI=yCONFIG_MMC_SDHCI_PLTFM=y
# CONFIG_MMC_OMAP is not setCONFIG_MMC_OMAP_HS=y
# CONFIG_MMC_AT91 is not set
# CONFIG_MMC_ATMELMCI is not set
# CONFIG_MMC_SPI is not set
# CONFIG_MEMSTICK is not setCONFIG_NEW_LEDS=yCONFIG_LEDS_CLASS=y
#
# LED drivers
#
# CONFIG_LEDS_PCA9532 is not setCONFIG_LEDS_GPIO=yCONFIG_LEDS_GPIO_PLATFORM=y
# CONFIG_LEDS_LP3944 is not set
# CONFIG_LEDS_PCA955X is not set
# CONFIG_LEDS_DAC124S085 is not set
# CONFIG_LEDS_BD2802 is not set
#
# LED Triggers
#CONFIG_LEDS_TRIGGERS=yCONFIG_LEDS_TRIGGER_TIMER=yCONFIG_LEDS_TRIGGER_HEARTBEAT=y
# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
# CONFIG_LEDS_TRIGGER_GPIO is not set
# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
#
# iptables trigger is under Netfilter config (LED target) # # CONFIG_ACCESSIBILITY is not set CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y CONFIG_RTC_HCTOSYS=y CONFIG_RTC_HCTOSYS_DEVICE="rtc0" # CONFIG_RTC_DEBUG is not set
#
# RTC interfaces
#CONFIG_RTC_INTF_SYSFS=yCONFIG_RTC_INTF_PROC=yCONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set
#
# I2C RTC drivers
#
# CONFIG_RTC_DRV_DS1307 is not set
# CONFIG_RTC_DRV_DS1374 is not set
# CONFIG_RTC_DRV_DS1672 is not set
# CONFIG_RTC_DRV_MAX6900 is not set
# CONFIG_RTC_DRV_RS5C372 is not set
# CONFIG_RTC_DRV_ISL1208 is not set
# CONFIG_RTC_DRV_X1205 is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not setCONFIG_RTC_DRV_TWL4030=y
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
# CONFIG_RTC_DRV_RX8025 is not set
#
# SPI RTC drivers
#
# CONFIG_RTC_DRV_M41T94 is not set
# CONFIG_RTC_DRV_DS1305 is not set
# CONFIG_RTC_DRV_DS1390 is not set
# CONFIG_RTC_DRV_MAX6902 is not set
# CONFIG_RTC_DRV_R9701 is not set
# CONFIG_RTC_DRV_RS5C348 is not set
# CONFIG_RTC_DRV_DS3234 is not set
# CONFIG_RTC_DRV_PCF2123 is not set
#
# Platform RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not set
# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# on-CPU RTC drivers
#CONFIG_DMADEVICES=y
#
# DMA Devices
#
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
#
# TI VLYNQ
#
# CONFIG_STAGING is not set
#
# CBUS support
#
# CONFIG_CBUS is not set
#
# File systems
#CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not setCONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
# CONFIG_EXT3_FS_XATTR is not set
# CONFIG_EXT4_FS is not setCONFIG_JBD=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not setCONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
# CONFIG_NILFS2_FS is not setCONFIG_FILE_LOCKING=yCONFIG_FSNOTIFY=yCONFIG_DNOTIFY=yCONFIG_INOTIFY=yCONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS_FS is not setCONFIG_AUTOFS4_FS=yCONFIG_FUSE_FS=y
# CONFIG_CUSE is not set
#
# Caches
#
# CONFIG_FSCACHE is not set
#
# CD-ROM/DVD Filesystems
#CONFIG_ISO9660_FS=mCONFIG_JOLIET=yCONFIG_ZISOFS=yCONFIG_UDF_FS=mCONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#CONFIG_FAT_FS=yCONFIG_MSDOS_FS=yCONFIG_VFAT_FS=yCONFIG_FAT_DEFAULT_CODEPAGE=437CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#CONFIG_PROC_FS=yCONFIG_PROC_SYSCTL=yCONFIG_PROC_PAGE_MONITOR=yCONFIG_SYSFS=yCONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not setCONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not setCONFIG_JFFS2_FS=yCONFIG_JFFS2_FS_DEBUG=0CONFIG_JFFS2_FS_WRITEBUFFER=y
# CONFIG_JFFS2_FS_WBUF_VERIFY is not setCONFIG_JFFS2_SUMMARY=yCONFIG_JFFS2_FS_XATTR=yCONFIG_JFFS2_FS_POSIX_ACL=yCONFIG_JFFS2_FS_SECURITY=yCONFIG_JFFS2_COMPRESSION_OPTIONS=yCONFIG_JFFS2_ZLIB=yCONFIG_JFFS2_LZO=yCONFIG_JFFS2_RTIME=yCONFIG_JFFS2_RUBIN=y
# CONFIG_JFFS2_CMODE_NONE is not setCONFIG_JFFS2_CMODE_PRIORITY=y
# CONFIG_JFFS2_CMODE_SIZE is not set
# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not setCONFIG_NETWORK_FILESYSTEMS=yCONFIG_NFS_FS=yCONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not setCONFIG_NFS_V4=y
# CONFIG_NFS_V4_1 is not setCONFIG_ROOT_NFS=y
# CONFIG_NFSD is not setCONFIG_LOCKD=yCONFIG_LOCKD_V4=yCONFIG_NFS_COMMON=yCONFIG_SUNRPC=yCONFIG_SUNRPC_GSS=yCONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not setCONFIG_CIFS=y
# CONFIG_CIFS_STATS is not set
# CONFIG_CIFS_WEAK_PW_HASH is not set
# CONFIG_CIFS_XATTR is not set
# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_CIFS_EXPERIMENTAL is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# Partition Types
#CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not setCONFIG_MSDOS_PARTITION=y
# CONFIG_BSD_DISKLABEL is not set
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
# CONFIG_LDM_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
# CONFIG_SYSV68_PARTITION is not setCONFIG_NLS=yCONFIG_NLS_DEFAULT="iso8859-1"CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not setCONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
# CONFIG_DLM is not set
#
# Kernel hacking
#CONFIG_PRINTK_TIME=yCONFIG_ENABLE_WARN_DEPRECATED=yCONFIG_ENABLE_MUST_CHECK=yCONFIG_FRAME_WARN=1024CONFIG_MAGIC_SYSRQ=y
# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not setCONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not setCONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not setCONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0CONFIG_DETECT_HUNG_TASK=y
# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not setCONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_DEBUG_CREDENTIALS is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
# CONFIG_PAGE_POISONING is not setCONFIG_HAVE_FUNCTION_TRACER=yCONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
# CONFIG_SAMPLES is not setCONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not setCONFIG_ARM_UNWIND=y
# CONFIG_DEBUG_USER is not setCONFIG_DEBUG_ERRORS=y
# CONFIG_DEBUG_STACK_USAGE is not setCONFIG_DEBUG_LL=y
# CONFIG_DEBUG_ICEDCC is not set
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not setCONFIG_CRYPTO=y
#
# Crypto core or helper
#CONFIG_CRYPTO_ALGAPI=yCONFIG_CRYPTO_ALGAPI2=yCONFIG_CRYPTO_AEAD2=yCONFIG_CRYPTO_BLKCIPHER=yCONFIG_CRYPTO_BLKCIPHER2=yCONFIG_CRYPTO_HASH=yCONFIG_CRYPTO_HASH2=yCONFIG_CRYPTO_RNG2=yCONFIG_CRYPTO_PCOMP=yCONFIG_CRYPTO_MANAGER=yCONFIG_CRYPTO_MANAGER2=yCONFIG_CRYPTO_GF128MUL=mCONFIG_CRYPTO_NULL=mCONFIG_CRYPTO_WORKQUEUE=yCONFIG_CRYPTO_CRYPTD=m
# CONFIG_CRYPTO_AUTHENC is not setCONFIG_CRYPTO_TEST=m
#
# Authenticated Encryption with Associated Data
#
# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_GCM is not set
# CONFIG_CRYPTO_SEQIV is not set
#
# Block modes
#CONFIG_CRYPTO_CBC=y
# CONFIG_CRYPTO_CTR is not set
# CONFIG_CRYPTO_CTS is not setCONFIG_CRYPTO_ECB=yCONFIG_CRYPTO_LRW=mCONFIG_CRYPTO_PCBC=m
# CONFIG_CRYPTO_XTS is not set
#
# Hash modes
#CONFIG_CRYPTO_HMAC=mCONFIG_CRYPTO_XCBC=m
# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#CONFIG_CRYPTO_CRC32C=y
# CONFIG_CRYPTO_GHASH is not setCONFIG_CRYPTO_MD4=mCONFIG_CRYPTO_MD5=yCONFIG_CRYPTO_MICHAEL_MIC=y
# CONFIG_CRYPTO_RMD128 is not set
# CONFIG_CRYPTO_RMD160 is not set
# CONFIG_CRYPTO_RMD256 is not set
# CONFIG_CRYPTO_RMD320 is not setCONFIG_CRYPTO_SHA1=mCONFIG_CRYPTO_SHA256=mCONFIG_CRYPTO_SHA512=mCONFIG_CRYPTO_TGR192=mCONFIG_CRYPTO_WP512=m
#
# Ciphers
#CONFIG_CRYPTO_AES=yCONFIG_CRYPTO_ANUBIS=mCONFIG_CRYPTO_ARC4=yCONFIG_CRYPTO_BLOWFISH=mCONFIG_CRYPTO_CAMELLIA=mCONFIG_CRYPTO_CAST5=mCONFIG_CRYPTO_CAST6=mCONFIG_CRYPTO_DES=yCONFIG_CRYPTO_FCRYPT=mCONFIG_CRYPTO_KHAZAD=m
# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_SEED is not setCONFIG_CRYPTO_SERPENT=mCONFIG_CRYPTO_TEA=mCONFIG_CRYPTO_TWOFISH=mCONFIG_CRYPTO_TWOFISH_COMMON=m
#
# Compression
#CONFIG_CRYPTO_DEFLATE=m
# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
# Random Number Generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not setCONFIG_CRYPTO_HW=y
# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#CONFIG_BITREVERSE=yCONFIG_GENERIC_FIND_LAST_BIT=yCONFIG_CRC_CCITT=yCONFIG_CRC16=yCONFIG_CRC_T10DIF=yCONFIG_CRC_ITU_T=yCONFIG_CRC32=yCONFIG_CRC7=yCONFIG_LIBCRC32C=yCONFIG_ZLIB_INFLATE=yCONFIG_ZLIB_DEFLATE=yCONFIG_LZO_COMPRESS=yCONFIG_LZO_DECOMPRESS=yCONFIG_DECOMPRESS_GZIP=yCONFIG_HAS_IOMEM=yCONFIG_HAS_IOPORT=yCONFIG_HAS_DMA=yCONFIG_NLATTR=y
Quoted 15 lines
-----Original Message-----
From: [email protected] [mailto:[email protected]] On Behalf Of Janosch Machowinski
Sent: Monday, October 19, 2009 9:15 AM
To: [email protected]
Subject: Re: stable kernel versionQuoted 5 lines
Can you try it with the omap-debug branch, and enable the
CONFIG_DEBUG_LLoption in your .config?Tony
Quoted 7 lines
This time I got some debug output, looks like it crashed somewhere in the USB Code. Deactivating the USB suspend option didn't help. Any ideas how to debug this further / fix it ?
Attached you'll finde the debug output and my kernel config.
Here's the problem:
<3>HS USB OTG: no transceiver configured
<3>musb_hdrc musb_hdrc: musb_init_controller failed with status -19
Depending on your board, you will have to define the transceiver for MUSB. It could be TWL4030 or NO-transceiver...
Drivers -> USB -> (last options) *** OTG and related infrastructure ***
Or do u want to disable USB to start with !!
Quoted 2 lines
Regards
Janosch
Quoted 7 lines · Vikram
Here's the problem:
<3>HS USB OTG: no transceiver configured
<3>musb_hdrcmusb_hdrc:musb_init_controllerfailed with status -19Depending on your board, you will have to define the transceiver for MUSB. It could be TWL4030 or NO-transceiver...
I got an Gumstix Overo Earth so which one would it be then ?
I tried one kernel, with only NOOP,
and one with all three options enabled,
same result any time (crash).
Quoted 4 lines
Drivers -> USB -> (last options) *** OTG and related infrastructure ***
Or do u want to disable USB to start with !!
Actually USB is the feature why I started compiling a new kernel in the fist place ;-)
Regards
Janosch
Hi Machowinski,
Enabling TWL4030 USB Transceiver Driver on your menuconfig the issue that you mentioned on a log file attached on previous mails is corrected. I had the same problem. Like an introduction, my name is Ivan Maldonado Zambrano and I'm working on USB tests for zoom3 and sdp. Attached my log file, if you compare with yours is the same problem.
Regards
Maldonado Zambrano, Ivan
[email protected]
Project L23x3630.
-----Original Message-----
From: [email protected] [mailto:[email protected]] On Behalf Of Janosch Machowinski
Sent: Monday, October 19, 2009 11:32 AM
To: [email protected]
Subject: Re: stable kernel version
Quoted 7 lines · Vikram
Here's the problem:
<3>HS USB OTG: no transceiver configured
<3>musb_hdrcmusb_hdrc:musb_init_controllerfailed with status -19Depending on your board, you will have to define the transceiver for MUSB. It could be TWL4030 or NO-transceiver...
I got an Gumstix Overo Earth so which one would it be then ?
I tried one kernel, with only NOOP,
and one with all three options enabled,
same result any time (crash).
Quoted 4 lines
Drivers -> USB -> (last options) *** OTG and related infrastructure ***
Or do u want to disable USB to start with !!
Actually USB is the feature why I started compiling a new kernel in the fist place ;-)
Regards
Janosch
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
j"*3*"��'"'"'"'"#"gR!R#"'"#"#"#2#*!('#*'*':!8gRgR'2'!(!8# ! 'gZ'*':!Z#"'':':':':
'*':':''':':'*'*''':':'"'"'"'"'"'2'2'"'"'"#"'2'&~?~~?~��
U-Boot 1.1.4-gd0eef958 (Oct 14 2009 - 17:53:38)
OMAP3630-GP rev 1, CPU-OPP2 L3-165MHz
OMAP3630Zoom3 1.0 Version + mDDR (Boot NOR)
DRAM: 512 MB
NAND:512 MiB
Reading data from 0x1c0000 -- 1% complete.Reading data from 0x1c0800 -- 3% complete.Reading data from 0x1c1000 -- 4% complete.Reading data from 0x1c1800 -- 6% complete.Reading data from 0x1c2000 -- 7% complete.Reading data from 0x1c2800 -- 9% complete.Reading data from 0x1c3000 -- 10% complete.Reading data from 0x1c3800 -- 12% complete.Reading data from 0x1c4000 -- 14% complete.Reading data from 0x1c4800 -- 15% complete.Reading data from 0x1c5000 -- 17% complete.Reading data from 0x1c5800 -- 18% complete.Reading data from 0x1c6000 -- 20% complete.Reading data from 0x1c6800 -- 21% complete.Reading data from 0x1c7000 -- 23% complete.Reading data from 0x1c7800 -- 25% complete.Reading data from 0x1c8000 -- 26% complete.Reading data from 0x1c8800 -- 28% complete.Reading data from 0x1c9000 -- 29% complete.Reading data from 0x1c9800 -- 31% complete.Reading data from 0x1ca000 -- 32% complete.Reading data from 0x1ca800 -- 34% complete.Reading data from 0x1cb000 -- 35% complete.Reading data from 0x1cb800 -- 37% complete.Reading data from 0x1cc000 -- 39% complete.Reading data from 0x1cc800 -- 40% complete.Reading data from 0x1cd000 -- 42% complete.Reading data from 0x1cd800 -- 43% complete.Reading data from 0x1ce000 -- 45% complete.Reading data from 0x1ce800 -- 46% complete.Reading data from 0x1cf000 -- 48% complete.Reading data from 0x1cf800 -- 50% complete.Reading data from 0x1d0000 -- 51% complete.Reading data from 0x1d0800 -- 53% complete.Reading data from 0x1d1000 -- 54% complete.Reading data from 0x1d1800 -- 56% complete.Reading data from 0x1d2000 -- 57% complete.Reading data from 0x1d2800 -- 59% complete.Reading data from 0x1d3000 -- 60% complete.Reading data from 0x1d3800 -- 62% complete.Reading data from 0x1d4000 -- 64% complete.Reading data from 0x1d4800 -- 65% complete.Reading data from 0x1d5000 -- 67% complete.Reading data from 0x1d5800 -- 68% complete.Reading data from 0x1d6000 -- 70% complete.Reading data from 0x1d6800 -- 71% complete.Reading data from 0x1d7000 -- 73% complete.Reading data from 0x1d7800 -- 75% complete.Reading data from 0x1d8000 -- 76% complete.Reading data from 0x1d8800 -- 78% complete.Reading data from 0x1d9000 -- 79% complete.Reading data from 0x1d9800 -- 81% complete.Reading data from 0x1da000 -- 82% complete.Reading data from 0x1da800 -- 84% complete.Reading data from 0x1db000 -- 85% complete.Reading data from 0x1db800 -- 87% complete.Reading data from 0x1dc000 -- 89% complete.Reading data from 0x1dc800 -- 90% complete.Reading data from 0x1dd000 -- 92% complete.Reading data from 0x1dd800 -- 93% complete.Reading data from 0x1de000 -- 95% complete.Reading data from 0x1de800 -- 96% complete.Reading data from 0x1df000 -- 98% complete.Reading data from 0x1df800 -- 100% complete.
In: serial Out: serial Err: serial Battery levels: main 4210 mV, backup 3206 mV Hit any key to stop autoboot: 10 9 0
OMAP36XX ZOOM2 # printenv
baudrate=115200
dieid#=327c00020000000004013ddd05026013
kernel_nand_offset=0x200000
kernel_nand_size=0x239800
bootdelay=10
ipaddr=10.87.224.61
serverip=10.87.231.150
gatewayip=10.87.224.1
gateway=10.87.224.1
netmask=255.255.254.0
bootcmd=tftpboot 80300000 ${bootfile};bootm; rootpath=10.87.231.150:/data/EVM_filesystems/x0109876/fs_zoom3/zoom3 ethaddr=00:08:EE:03:3A:1D
bootargs=mem=256M console=ttyS0,115200n8 noinitrd root=/dev/nfs rw nfsroot=10.87 .231.150:/data/EVM_filesystems/x0109876/fs_zoom3/zoom3,nolock,tcp,rsize=1024,wsi ze=1024 ip=10.87.224.61 devfs=mount bootfile=/data/EVM_filesystems/x0109876/tftpboot/uImage_3630_zoom3_OE_HCI stdin=serial
stdout=serial
stderr=serial
Environment size: 681/131068 bytes
OMAP36XX ZOOM2 # boot
LAN9x18 (0x92210000) detected.
Read mac address: 00:08:EE:03:3A:1D
start Auto negotiation... (take ~2sec)
Auto negotiation complete, 100BaseTX, full duplex
TFTP from server 10.87.231.150; our IP address is 10.87.224.61; sending through gateway 10.87.224.1
Filename '/data/EVM_filesystems/x0109876/tftpboot/uImage_3630_zoom3_OE_HCI'. Load address: 0x80300000
Loading: *#################################################################
################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ######################### done Bytes transferred = 2457336 (257ef8 hex) ## Booting image at 80300000 ... Image Name: Linux-2.6.31-rc7-omap1-06759-ga5 Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 2457272 Bytes = 2.3 MB
Load Address: 80008000
Entry Point: 80008000
Verifying Checksum ... OK
OK
Starting kernel ...
Uncompressing Linux.............................................................
................................................................................
................ done, booting the kernel.
<5>Linux version 2.6.31-rc7-omap1-06759-ga5386d1 (ivan@phoenix) (gcc version 4.3 .2 (Sourcery G++ Lite 2008q3-72) ) #1 PREEMPT Fri Oct 16 20:30:35 CDT 2009
CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c53c7f
CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
Machine: OMAP Zoom3 board
Memory policy: ECC disabled, Data cache writeback
<7>On node 0 totalpages: 65536
<7>free_area_init_node: node 0, pgdat c04d5c74, node_mem_map c04f5000
<7> Normal zone: 512 pages used for memmap <7> Normal zone: 0 pages reserved <7> Normal zone: 65024 pages, LIFO batch:15
<6>OMAP3630 ES1.0
<6>SRAM: Mapped pa 0x40200000 to va 0xe3000000 size: 0x100000 <6>Reserving 4194304 bytes SDRAM for VRAM
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 65024 <5>Kernel command line: mem=256M console=ttyS0,115200n8 noinitrd root=/dev/nfs r w nfsroot=10.87.231.150:/data/EVM_filesystems/x0109876/fs_zoom3/zoom3,nolock,tcp ,rsize=1024,wsize=1024 ip=10.87.224.61 devfs=mount
PID hash table entries: 1024 (order: 10, 4096 bytes)
<6>Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) <6>Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) <6>Memory: 256MB = 256MB total
<5>Memory: 244352KB available (4380K code, 371K data, 148K init, 0K highmem) <6>SLUB: Genslabs=11, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 <6>NR_IRQS:402
<6>Clocking rate (Crystal/Core/MPU): 26.0/332/660 MHz <6>Reprogramming SDRC clock to 332000000 Hz
<6>GPMC revision 5.0
<6>IRQ: Found an INTC at 0xd8200000 (revision 4.0) with 96 interrupts <6>Total of 96 interrupts on 1 active controller
<6>OMAP34xx GPIO hardware version 2.5
<6>OMAP clockevent source: GPTIMER1 at 32768 Hz
Console: colour dummy device 80x30
<6>Calibrating delay loop... <c>658.56 BogoMIPS (lpj=2572288) Mount-cache hash table entries: 512
<6>CPU: Testing write buffer coherency: ok
<7>PM: Adding info for No Bus:platform
<7>PM: Adding info for No Bus:omapdss
<6>regulator: core version 0.5
<6>NET: Registered protocol family 16
<7>PM: Adding info for No Bus:vtcon0
<7>PM: Adding info for platform:i2c_omap.1
<7>PM: Adding info for platform:i2c_omap.2
<7>PM: Adding info for platform:i2c_omap.3
<7>PM: Adding info for platform:zoom2_cam
<7>PM: Adding info for platform:omapdss
<4>MUX: setup H18_34XX_GPIO163 (0xd800219a): 0x0108 -> 0x011c <7>PM: Adding info for platform:serial8250.0
<7>PM: Adding info for platform:serial8250.1
<7>PM: Adding info for platform:serial8250.2
<7>PM: Adding info for platform:smsc911x
<7>PM: Adding info for platform:serial8250.3
<7>PM: Adding info for platform:musb_hdrc
<4>MUX: setup C25_34XX_GPIO96 (0xd8002110): 0x0000 -> 0x0004 <4>MUX: setup AF26_34XX_SYS_NIRQ (0xd80021e0): 0x0118 -> 0x4118 <4>MUX: setup H26_3630_DSS_DATA18 (0xd8002100): 0x0003 -> 0x010b <4>MUX: setup H25_3630_DSS_DATA19 (0xd8002102): 0x0003 -> 0x010b <4>MUX: setup J26_3630_DSS_DATA21 (0xd8002106): 0x0003 -> 0x010b <7>PM: Adding info for platform:omap2-nand.0
<7>PM: Adding info for platform:omap3isp
<7>PM: Adding info for platform:omap2_mcspi.1
<7>PM: Adding info for platform:omap2_mcspi.2
<7>PM: Adding info for platform:omap-mcbsp.1
<7>PM: Adding info for platform:omap-mcbsp.2
<7>PM: Adding info for platform:omap-mcbsp.3
<7>PM: Adding info for platform:omap-mcbsp.4
<7>PM: Adding info for platform:omap-mcbsp.5
<7>PM: Adding info for platform:omap_vout
<6>OMAP DMA hardware revision 5.0
<7>PM: Adding info for platform:omapfb
<7>PM: Adding info for No Bus:default
bio: create slab <bio-0> at 0
<6>i2c_omap i2c_omap.1: bus 1 rev4.0 at 2600 kHz
<7>PM: Adding info for No Bus:i2c-1
<7>PM: Adding info for i2c:1-0048
<7>PM: Adding info for i2c:1-0049
<7>PM: Adding info for i2c:1-004a
<7>PM: Adding info for i2c:1-004b
<4>TWL4030: Wakeup script not yet loaded. Might lead to boot failure on some boa rds
<6>twl4030: PIH (irq 7) chaining IRQs 368..375
<6>twl4030: power (irq 373) chaining IRQs 376..383
<7>PM: Adding info for platform:twl4030_bci
<7>PM: Adding info for platform:twl4030_gpio
<6>twl4030: gpio (irq 368) chaining IRQs 384..401
<7>PM: Adding info for platform:mmci-omap-hs.0
<7>PM: Adding info for platform:mmci-omap-hs.1
<7>PM: Adding info for platform:twl4030_keypad
<7>PM: Adding info for platform:twl4030_madc
<7>PM: Adding info for platform:twl4030_rtc
<7>PM: Adding info for platform:twl4030_reg.6
<7>PM: Adding info for No Bus:regulator.0
<6>regulator: VMMC1: 1850 <--> 3150 mV normal standby
<7>PM: Adding info for platform:twl4030_reg.3
<7>PM: Adding info for No Bus:regulator.1
<6>regulator: VDAC: 1800 mV normal standby
<7>PM: Adding info for platform:twl4030_reg.10
<7>PM: Adding info for No Bus:regulator.2
<6>regulator: VAUX2_4030: 2800 mV normal standby
<7>PM: Adding info for platform:twl4030_reg.7
<7>PM: Adding info for No Bus:regulator.3
<6>regulator: VMMC2: 1850 mV normal standby
<7>PM: Adding info for platform:twl4030_reg.8
<7>PM: Adding info for No Bus:regulator.4
<6>regulator: VSIM: 1800 <--> 3000 mV normal standby
<7>PM: Adding info for platform:twl4030_reg.13
<7>PM: Adding info for No Bus:regulator.5
<6>regulator: VAUX4: 1800 mV normal standby
<6>i2c_omap i2c_omap.2: bus 2 rev4.0 at 100 kHz
<7>PM: Adding info for No Bus:i2c-2
<7>PM: Adding info for i2c:2-0020
<7>PM: Adding info for i2c:2-001a
<7>PM: Adding info for i2c:2-0072
<6>i2c_omap i2c_omap.3: bus 3 rev4.0 at 400 kHz
<7>PM: Adding info for No Bus:i2c-3
<5>SCSI subsystem initialized
<7>PM: Adding info for No Bus:spi1
<7>PM: Adding info for spi:spi1.2
<7>PM: Adding info for No Bus:spi2
<6>usbcore: registered new interface driver usbfs
<6>usbcore: registered new interface driver hub
<6>usbcore: registered new device driver usb
<7>PM: Adding info for No Bus:lo
<7>PM: Adding info for No Bus:mem
<7>Switched to high resolution mode on CPU 0
<7>PM: Adding info for No Bus:kmem
<7>PM: Adding info for No Bus:null
<7>PM: Adding info for No Bus:zero
<7>PM: Adding info for No Bus:full
<7>PM: Adding info for No Bus:random
<7>PM: Adding info for No Bus:urandom
<7>PM: Adding info for No Bus:kmsg
<6>musb_hdrc: version 6.0, musb-dma, otg (peripheral+host), debug=0 <3>HS USB OTG: no transceiver configured
<3>musb_hdrc musb_hdrc: musb_init_controller failed with status -19 <1>Unable to handle kernel NULL pointer dereference at virtual address 00000028 <1>pgd = c0004000
<1>[00000028] *pgd=00000000
Internal error: Oops: 5 [#1] PREEMPT <d>Modules linked in: CPU: 0 Not tainted (2.6.31-rc7-omap1-06759-ga5386d1 #1) PC is at musb_platform_suspend+0x40/0x88 LR is at musb_platform_suspend+0x3c/0x88 pc : [<c025c238>] lr : [<c025c234>] psr: a0000013
sp : cf825e00 ip : 00000064 fp : c04a4ee0
r10: cf81a150 r9 : 00000000 r8 : c04c2b80
r7 : cf8af000 r6 : cf81a0d0 r5 : cf81a0d0 r4 : cf81a0d0 r3 : c04a0d44 r2 : cf825da8 r1 : d80ab404 r0 : 00000000
Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel
Control: 10c5387d Table: 80004019 DAC: 00000017 Process swapper (pid: 1, stack limit = 0xcf8242e8)
Stack: (0xcf825e00 to 0xcf826000)
5e00: cf81a0d0 c025c28c 00000000 c025aef4 ffffffed 00000000 cf81a0d0 c001d348 5e20: cf825e64 00000002 00000000 cf824000 c04a4ee8 0000005c d80ab000 c04a4ec4 5e40: cf81a000 c01bb4a8 000041ed cf825e9c c04982e4 cf806850 00000000 c00a9c78 5e60: c1131e74 c00f8b28 cf84bcc0 cf801200 00000000 c0360ca4 00000000 cf825ec0 5e80: cf956720 c00f9334 cf956720 cf825ec0 cf956720 c00f8ef8 cf956720 cf825ec0 5ea0: cf825ec0 00000000 cf825ec0 cf956720 cf84bcc0 00000001 00000000 c00f9e70 5ec0: cf84bcc0 00000000 00000000 c04a4ee8 c04a4ee8 c04c833c cf8af000 c04c2b80 5ee0: 00000000 00000000 00000000 c020f380 c04a4ee8 c020e698 c04a4ee8 c04a4f1c 5f00: c04c833c cf8af000 c04c2b80 c020e7a4 00000000 c020e744 c04c833c c020df70 5f20: cf8045b8 cf849c90 c00252e8 c04c8320 c04c833c c020d8d4 c037cfb0 c037cfb0 5f40: cf825f40 c00252e8 c04c8320 c04c833c c001c694 00000001 00000000 c020ea74 5f60: c00252e8 c04c8320 00000000 c001c694 00000001 c020f7b4 c00252e8 00000000 5f80: 00000000 c002d2cc cf825fb4 c04059c2 00008124 0000024e c04afa00 cf845680 5fa0: c04afa38 0000015f c04df070 c00f31b4 c04059c2 cf844840 cf825fc6 c0082194 5fc0: 00000000 35339a80 00000031 00000000 00000000 00000192 c00252e8 00000000 5fe0: 00000000 00000000 00000000 c0008578 00000000 c002e8a0 ffffffff fffffffb [<c025c238>] (musb_platform_suspend+0x40/0x88) from [<c025c28c>] (musb_platform_
exit+0xc/0x20) [<c025c28c>] (musb_platform_exit+0xc/0x20) from [<c025aef4>] (musb_free+0x94/0xd
8)
[<c025aef4>] (musb_free+0x94/0xd8) from [<c001d348>] (musb_probe+0xb14/0xc0c) [<c001d348>] (musb_probe+0xb14/0xc0c) from [<c020f380>] (platform_drv_probe+0x18 /0x1c)
[<c020f380>] (platform_drv_probe+0x18/0x1c) from [<c020e698>] (driver_probe_devi
ce+0xa0/0x14c) [<c020e698>] (driver_probe_device+0xa0/0x14c) from [<c020e7a4>] (__driver_attach +0x60/0x84) [<c020e7a4>] (__driver_attach+0x60/0x84) from [<c020df70>] (bus_for_each_dev+0x4
4/0x74)
[<c020df70>] (bus_for_each_dev+0x44/0x74) from [<c020d8d4>] (bus_add_driver+0x98 /0x210)
[<c020d8d4>] (bus_add_driver+0x98/0x210) from [<c020ea74>] (driver_register+0xa8 /0x130)
[<c020ea74>] (driver_register+0xa8/0x130) from [<c020f7b4>] (platform_driver_pro
be+0x10/0x90) [<c020f7b4>] (platform_driver_probe+0x10/0x90) from [<c002d2cc>] (do_one_initcal l+0x54/0x194) [<c002d2cc>] (do_one_initcall+0x54/0x194) from [<c0008578>] (kernel_init+0x90/0x 10c) [<c0008578>] (kernel_init+0x90/0x10c) from [<c002e8a0>] (kernel_thread_exit+0x0/ 0x8) Code: e59f104c e3800004 ebf7a073 e5940074 (e5903028)
<4>---[ end trace 1b75b31a2719ed1c ]--- <0>Kernel panic - not syncing: Attempted to kill init!
Hi,
Does this commit fixes the issue?
[v2] usb: musb: Warn and check for OTG transceiver misconfiguration
Warn if OTG is selected in Kconfig but not initialized by platform code. Add checks to prevent NULL pointer exception in case the
OTG transceiver has not been initialized. i.e. musb->xceiv == NULL
--- drivers/usb/musb/musb_core.c | 7 ++++++- drivers/usb/musb/omap2430.c | 3 ++- 2 files changed, 8 insertions(+), 2 deletions(-)
Cheers,
Ameya.
Quoted 37 lines · Ivan
Hi Machowinski,
Enabling TWL4030 USB Transceiver Driver on your menuconfig the issue that you mentioned on a log file attached on previous mails is corrected. I had the same problem. Like an introduction, my name is Ivan Maldonado Zambrano and I'm working on USB tests for zoom3 and sdp. Attached my log file, if you compare with yours is the same problem.
Regards
Maldonado Zambrano, Ivan
[email protected]
Project L23x3630.-----Original Message-----
From: [email protected] [mailto:[email protected]] On Behalf Of Janosch Machowinski
Sent: Monday, October 19, 2009 11:32 AM
To: [email protected]
Subject: Re: stable kernel versionQuoted 7 lines · Vikram
Here's the problem:
<3>HS USB OTG: no transceiver configured
<3>musb_hdrcmusb_hdrc:musb_init_controllerfailed with status -19Depending on your board, you will have to define the transceiver for MUSB. It could be TWL4030 or NO-transceiver...
I got an Gumstix Overo Earth so which one would it be then ?
I tried one kernel, with only NOOP,
and one with all three options enabled,
same result any time (crash).Quoted 4 lines
Drivers -> USB -> (last options) *** OTG and related infrastructure ***
Or do u want to disable USB to start with !!
Actually USB is the feature why I started compiling a new kernel in the fist place ;-)
Quoted 8 lines
Regards
Janosch
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Ameya,
The issue that I'm talking about is:
<3>HS USB OTG: no transceiver configured
<3>musb_hdrc musb_hdrc: musb_init_controller failed with status -19
Actually I'm running usb tests. At the moment of boot my zoom3 I had this issue. Taking the suggestion of Vikram the issue was solved.
Regards
Maldonado Zambrano, Ivan
[email protected]
Project L23x3630.
-----Original Message-----
From: Ameya Palande [mailto:[email protected]]
Sent: Monday, October 19, 2009 12:29 PM
To: Maldonado Zambrano, Ivan
Cc: Janosch Machowinski; [email protected]
Subject: Re: stable kernel version
Hi,
Does this commit fixes the issue?
[v2] usb: musb: Warn and check for OTG transceiver misconfiguration
Warn if OTG is selected in Kconfig but not initialized by platform code. Add checks to prevent NULL pointer exception in case the
OTG transceiver has not been initialized. i.e. musb->xceiv == NULL
--- drivers/usb/musb/musb_core.c | 7 ++++++- drivers/usb/musb/omap2430.c | 3 ++- 2 files changed, 8 insertions(+), 2 deletions(-)
Cheers,
Ameya.
Quoted 37 lines · Ivan
Hi Machowinski,
Enabling TWL4030 USB Transceiver Driver on your menuconfig the issue that you mentioned on a log file attached on previous mails is corrected. I had the same problem. Like an introduction, my name is Ivan Maldonado Zambrano and I'm working on USB tests for zoom3 and sdp. Attached my log file, if you compare with yours is the same problem.
Regards
Maldonado Zambrano, Ivan
[email protected]
Project L23x3630.-----Original Message-----
From: [email protected] [mailto:[email protected]] On Behalf Of Janosch Machowinski
Sent: Monday, October 19, 2009 11:32 AM
To: [email protected]
Subject: Re: stable kernel versionQuoted 7 lines · Vikram
Here's the problem:
<3>HS USB OTG: no transceiver configured
<3>musb_hdrcmusb_hdrc:musb_init_controllerfailed with status -19Depending on your board, you will have to define the transceiver for MUSB. It could be TWL4030 or NO-transceiver...
I got an Gumstix Overo Earth so which one would it be then ?
I tried one kernel, with only NOOP,
and one with all three options enabled,
same result any time (crash).Quoted 4 lines
Drivers -> USB -> (last options) *** OTG and related infrastructure ***
Or do u want to disable USB to start with !!
Actually USB is the feature why I started compiling a new kernel in the fist place ;-)
Quoted 8 lines
Regards
Janosch
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Ameya,
this patch fixes the kernel panic. For my taste
there should be a more verbose message, that
the USB won't work, but otherwise it is fine ;-)
Regards
Janosch
Quoted 76 lines · Ameya Palande
Hi,
Does this commit fixes the issue?
[v2] usb: musb: Warn and check for OTG transceiver misconfiguration
Warn if OTG is selected in
Kconfigbut not initialized by platform code. Add checks to prevent NULL pointer exception in case the
OTG transceiver has not been initialized. i.e.musb->xceiv== NULLSigned-off-by Roger Quadros <[email protected]>--- drivers/usb/musb/musb_core.c | 7 ++++++- drivers/usb/musb/omap2430.c | 3 ++- 2 files changed, 8 insertions(+), 2 deletions(-)Cheers,
Ameya.Quoted 50 lines · Ivan
Hi Machowinski,
Enabling TWL4030 USB Transceiver Driver on your menuconfig the issue that you mentioned on a log file attached on previous mails is corrected. I had the same problem. Like an introduction, my name is Ivan Maldonado Zambrano and I'm working on USB tests for zoom3 and sdp. Attached my log file, if you compare with yours is the same problem.
Regards
Maldonado Zambrano, Ivan
[email protected]
Project L23x3630.-----Original Message-----
From: [email protected] [mailto:[email protected]] On Behalf Of Janosch Machowinski
Sent: Monday, October 19, 2009 11:32 AM
To: [email protected]
Subject: Re: stable kernel versionQuoted 8 lines · Vikram
Here's the problem:
<3>HS USB OTG: no transceiver configured
<3>musb_hdrcmusb_hdrc:musb_init_controllerfailed with status -19Depending on your board, you will have to define the transceiver for MUSB. It could be TWL4030 or NO-transceiver...
I got an Gumstix Overo Earth so which one would it be then ?
I tried one kernel, with only NOOP,
and one with all three options enabled,
same result any time (crash).Quoted 5 lines
Drivers -> USB -> (last options) *** OTG and related infrastructure ***
Or do u want to disable USB to start with !!
Actually USB is the feature why I started compiling a new kernel in the fist place ;-)
Regards
Janosch
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html