Linux for MPC5554 or MPC5534 (core e200z6)?
Hi Grant,
Hello List,
is there anybody who was successfully run Linux kernel on Freescale MPC5554 [1], [2] or on Freescale MPC5534 [3], [4]? Both of these embedded PowerPC controllers have the e200z6 core.
Is there anybody who is working with these controllers or with the e200z6 core?
References:
[1] Freescale MPC5554
http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=MPC5554
[2] MPC5553/MPC5554 Microcontroller Reference Manual
http://www.freescale.com/files/32bit/doc/ref_manual/MPC5553_MPC5554_RM.pdf
[3] Freescale MPC5534
http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=MPC5534
[4] MPC5534 Microcontroller Reference Manual
http://www.freescale.com/files/32bit/doc/ref_manual/MPC5534RM.pdf
Regards,
Márton Németh
Quoted 10 lines · On Oct 20, 2009, at 5:21 PM, N=E9meth M=E1rton wrote:
Hi Grant,
Hello List,is there anybody who was successfully run Linux kernel on Freescale =20=
MPC5554
[1], [2] or on Freescale MPC5534 [3], [4]? Both of these embedded =20 PowerPC
controllers have the e200z6 core.
Quoted 6 lines
Is there anybody who is working with these controllers or with the =20 e200z6 core?
References:
[1] Freescale MPC5554
=
http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=3DMPC5554
Quoted 3 lines
[2] MPC5553/MPC5554 Microcontroller Reference Manual =
http://www.freescale.com/files/32bit/doc/ref_manual/MPC5553_MPC5554_RM.pdf=
Quoted 7 lines
[3] Freescale MPC5534
http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=3DMPC5534=[4] MPC5534 Microcontroller Reference Manual
http://www.freescale.com/files/32bit/doc/ref_manual/MPC5534RM.pdf
I'm not aware of anyone working on Linux for these chips based on the =20=
e200z6. What application do you have that you want to run Linux on =20 them?
- k=
Quoted 24 lines · Kumar Gala
Quoted 22 lines · Németh Márton
Hi Grant,
Hello List,is there anybody who was successfully run Linux kernel on Freescale MPC5554
[1], [2] or on Freescale MPC5534 [3], [4]? Both of these embedded PowerPC
controllers have the e200z6 core.Is there anybody who is working with these controllers or with the e200z6 core?
References:
[1] Freescale MPC5554
http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=MPC5554[2] MPC5553/MPC5554 Microcontroller Reference Manual
http://www.freescale.com/files/32bit/doc/ref_manual/MPC5553_MPC5554_RM.pdf[3] Freescale MPC5534
http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=MPC5534
Quoted 6 lines
Quoted 2 lines
[4] MPC5534 Microcontroller Reference Manual
http://www.freescale.com/files/32bit/doc/ref_manual/MPC5534RM.pdfI'm not aware of anyone working on Linux for these chips based on the e200z6. What application do you have that you want to run Linux on them?
At this time I am just looking to see what kind of operating systems these chips can run. I think the first step to run Linux would be that the MMU and serial console starts to work then maybe I would check how the PF_CAN interface ( http://lwn.net/Articles/253425/ ) would work on this device if a FlexCAN2 driver is available.
Is there any other powerpc port with e200z6 core?
Regards,
Márton Németh
Quoted 12 lines · On Oct 21, 2009, at 10:19 AM, N=E9meth M=E1rton wrote:
Quoted 11 lines · Kumar Gala
Quoted 9 lines · On Oct 20, 2009, at 5:21 PM, N=E9meth M=E1rton wrote:
Hi Grant,
Hello List,is there anybody who was successfully run Linux kernel on Freescale MPC5554
[1], [2] or on Freescale MPC5534 [3], [4]? Both of these embedded PowerPC
controllers have the e200z6 core.
Quoted 6 lines
Quoted 6 lines
Quoted 6 lines
Is there anybody who is working with these controllers or with the e200z6 core?
References:
[1] Freescale MPC5554
=
http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=3DMPC5554
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
[2] MPC5553/MPC5554 Microcontroller Reference Manual =
http://www.freescale.com/files/32bit/doc/ref_manual/MPC5553_MPC5554_RM.pdf=
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
[3] Freescale MPC5534
=
http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=3DMPC5534
Quoted 13 lines
Quoted 7 lines
Quoted 3 lines
[4] MPC5534 Microcontroller Reference Manual
http://www.freescale.com/files/32bit/doc/ref_manual/MPC5534RM.pdfI'm not aware of anyone working on Linux for these chips based on the e200z6. What application do you have that you want to run Linux on them?
At this time I am just looking to see what kind of operating systems =20=
these
chips can run. I think the first step to run Linux would be that the =20=
Quoted 8 lines
MMU
and serial console starts to work then maybe I would check how the =20PF_CAN
interface ( http://lwn.net/Articles/253425/ ) would work on this =20 device
if a FlexCAN2 driver is available.Is there any other powerpc port with e200z6 core?
I'm not aware of any other parts w/the e2002z6 core. The MMU code =20 exists in the kernel for e200, but probably needs some updating/=20 rehashing.
- k=
2009/10/21 N=E9meth M=E1rton <[email protected]>:
Quoted 4 lines
Hi Grant,
Hello List,is there anybody who was successfully run Linux kernel on Freescale MPC55=
54
Quoted 4 lines
[1], [2] or on Freescale MPC5534 [3], [4]? Both of these embedded PowerPC controllers have the e200z6 core.
Is there anybody who is working with these controllers or with the e200z6=
core?
I'm pretty sure nobody has done a Linux port to any of these chips. Nor do I know of any work having been done in the past.
g.
--=20
Grant Likely, B.Sc., P.Eng.
Secret Lab Technologies Ltd.