Skip to contentSkip to conversation

PCI hotplug: use correct term for PCI Express

PATCH In review Stefan Assmann 2 participants 4 messages Oct 26, 2009 PCI

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 PCI hotplug: use correct term for PCI Express

Change PCI-E to PCIe which is the correct term according to
http://www.pcisig.com/developers/procedures/logos/Trademark_and_Logo_Usage_Guidelines_updated_112206.pdf.

---

drivers/pci/hotplug/pci_hotplug_core.c +2 -2
index 0325d98..1286c3a 100644
@@ -86,8 +86,8 @@ static char *pci_bus_speed_strings[] = {
 	"66 MHz PCIX 533",	/* 0x11 */
 	"100 MHz PCIX 533",	/* 0x12 */
 	"133 MHz PCIX 533",	/* 0x13 */
-	"2.5 GT/s PCI-E",	/* 0x14 */
-	"5.0 GT/s PCI-E",	/* 0x15 */
+	"2.5 GT/s PCIe",	/* 0x14 */
+	"5.0 GT/s PCIe",	/* 0x15 */
 };
 
 #ifdef CONFIG_HOTPLUG_PCI_CPCI
#1 lore raw
Quoted 2 lines · Stefan Assmann

Change PCI-E to PCIe which is the correct term according to
http://www.pcisig.com/developers/procedures/logos/Trademark_and_Logo_Usage_Guidelines_updated_112206.pdf.

Right.

drivers/pci/hotplug/pci_hotplug_core.c static char *pci_bus_speed_strings[] = { · line 90

Quoted 9 lines

+++ b/drivers/pci/hotplug/pci_hotplug_core.c

drivers/pci/hotplug/pci_hotplug_core.c +2 -2
@@ -86,8 +86,8 @@ static char *pci_bus_speed_strings[] = {
 	"66 MHz PCIX 533",	/* 0x11 */
 	"100 MHz PCIX 533",	/* 0x12 */
 	"133 MHz PCIX 533",	/* 0x13 */
-	"2.5 GT/s PCI-E",	/* 0x14 */
-	"5.0 GT/s PCI-E",	/* 0x15 */
+	"2.5 GT/s PCIe",	/* 0x14 */
+	"5.0 GT/s PCIe",	/* 0x15 */

In addition to this, it seems "PCIX" should also be changed to "PCI-X", shouldn't it?

Signature · 1 line
Krzysztof Halasa
#2 lore raw
Quoted 7 lines · Krzysztof Halasa
Quoted 2 lines · Stefan Assmann

Change PCI-E to PCIe which is the correct term according to
http://www.pcisig.com/developers/procedures/logos/Trademark_and_Logo_Usage_Guidelines_updated_112206.pdf.

Right.

Quoted 12 lines

drivers/pci/hotplug/pci_hotplug_core.c static char *pci_bus_speed_strings[] = { · line 90

Quoted 9 lines

+++ b/drivers/pci/hotplug/pci_hotplug_core.c

drivers/pci/hotplug/pci_hotplug_core.c +2 -2
@@ -86,8 +86,8 @@ static char *pci_bus_speed_strings[] = {
 	"66 MHz PCIX 533",	/* 0x11 */
 	"100 MHz PCIX 533",	/* 0x12 */
 	"133 MHz PCIX 533",	/* 0x13 */
-	"2.5 GT/s PCI-E",	/* 0x14 */
-	"5.0 GT/s PCI-E",	/* 0x15 */
+	"2.5 GT/s PCIe",	/* 0x14 */
+	"5.0 GT/s PCIe",	/* 0x15 */

In addition to this, it seems "PCIX" should also be changed to "PCI-X", shouldn't it?

Thanks for reminding me Krzysztof. I'll repost a patch with the changes included.

Stefan
--

Stefan Assmann         | Red Hat GmbH
Software Engineer      | Otto-Hahn-Strasse 20, 85609 Dornach
                       | HR: Amtsgericht Muenchen HRB 153243
                       | GF: Brendan Lane, Charlie Peters,
sassmann at redhat.com |     Michael Cunningham, Charles Cachera
#3 lore raw
Quoted 5 lines · Stefan Assmann
Quoted 2 lines

In addition to this, it seems "PCIX" should also be changed to "PCI-X", shouldn't it?

Thanks for reminding me Krzysztof. I'll repost a patch with the changes included.

Great and thanks a lot.

Signature · 1 line
Krzysztof Halasa