Skip to contentSkip to conversation

OMAP DSS2 - bpp problem

DISCUSSION Tomi Valkeinen 1 participant 1 message Oct 28, 2009 1 message not in the archive

lore
Share & tools
lore

A message that is not in the archive (sent off-list or not yet received): [email protected]

#1 lore raw

Hi,

You can define default modes in board file, using platform data for omapfb.

See omapfb.h:

struct omapfb_platform_data
struct omapfb_mem_desc
struct omapfb_mem_region
omapfb_set_platform_data().

If you need to do it dynamically in boot scripts, you can change the mode via the normal fb interface. You don't need to expose recommended_bpp.

Tomi

Ps. Please also cc linux-omap mailing list, so other people will see the answers also.

Quoted 44 lines · ext Laurent Epinat

Hello Tomi,

I would like to know your opinion.

We had own board with 2 differents configuration
First with VGA/DVI display and the other with LCD panel (Prime view) for each configuration we need to used 2 differents color depth (24 bpp, 16 bpp).

For the vga I can override the parameters with the module args (mode=dvi:1024x768-16@60)
but for the lcd panel is not working, I seen in the display.c than the get_recommended_bpp() return the data_lines of the panel (own panel has 18 physical lines but connected like 24 lines)

I decided to expose the variable panel.recommended_bpp in the sysfs for forcing the value, it works but I think it's really dirty cause in one case I'm using

	modprobe omapdss def_disp=lcd
	modprobe panel_primeview_pm070wt3
	if [ x${OGLES} = x"yes" ]; then
  		echo "16" > /sys/devices/omapdss/display0/recommended_bpp
     	fi
     	modprobe omapfb vram=0:4M,1:4M,2:4M

and the other case :

	modprobe omapdss def_disp=dvi
	modprobe panel_generic
	if [ x${OGLES} = x"yes" ]; then
		SCREEN_MODE="mode=dvi:1024x768-16@60"
	else
		SCREEN_MODE="mode=dvi:1024x768-24@60"
	fi
	modprobe omapfb vram=0:4M,1:4M,2:4M :${SCREEN_MODE}

Have you any ideas to do it better?

sorry for my english