Skip to contentSkip to conversation

S3C6410 / SMDK6410 USB OTG Host status

DISCUSSION Ivan Kuten 2 participants 2 messages Oct 29, 2009 – Oct 30, 2009

lore
Share & tools
lore

Ivan Kuten

author
#0 lore raw

Anybody has working USB OTG Host on S3C6410 on SMDK6410 or other board? If possible please post an output with debug enabled in drivers/usb/host/s3c-otg

Best regards,
Ivan

#1 lore raw

hi,i have test samsung s3c6410 usb otg,if didn't use USB HUB(2.0) between usb otg and usb 2.0 device,it is ok,if use USB HUB 2.0 between them,will failed ,say "usb device error -62"!

?2009-10-30?02:16:41?"Ivan?Kuten"?<[email protected]>????

Quoted 11 lines

Anybody?has?working?USB?OTG?Host?on?S3C6410?on?SMDK6410?or?other?board? If?possible?please?post?an?output?with?debug?enabled?in?drivers/usb/host/s3c-otg

Best?regards,
Ivan

_______________________________________________
linux-arm-kernel?mailing?list
linux-arm-kernel at lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20091030/15906df2/attachment.htm>