Skip to contentSkip to conversation

Do defconfigs work for 2.6.32-rc5 mainline kernels?

DISCUSSION Bill Gatliff 4 participants 4 messages Oct 30, 2009 – Nov 2, 2009

lore
Share & tools
lore
#0 lore raw

I'm trying to build a kernel for beagleboard, using the defconfig found in 2.6.32-rc5 and the 2.6.32-rc5 source code.

Said kernel hangs after the uncompressor, I'm just trying to figure out if this is a known issue or not. The defconfig in the linux-omap tree does seem to work with the linux-omap source code, FWIW...

b.g.

Signature · 2 lines
Bill Gatliff
[email protected]
#1 lore raw
Quoted 6 lines · Bill Gatliff

I'm trying to build a kernel for beagleboard, using the defconfig found in 2.6.32-rc5 and the 2.6.32-rc5 source code.

Said kernel hangs after the uncompressor, I'm just trying to figure out if this is a known issue or not. The defconfig in the linux-omap tree does seem to work with the linux-omap source code, FWIW...

Short story:
I found that the omap OSK defconfig is broken in mainline also.

Long story:
I found that the defconfig in the mainline 2.6.32-rc1 kernel didn't work on an OMAP OSK board. Thinking there was some problem in the code itself, I bisected from a known working config on 2.6.29 all the way back up to 2.6.32-rc1. When I was done I was at the current code base, but with a .config that had about 650 differences.

I haven't had time to go back and find the individual config option that changed to break things. I would need some kind of "config bisect" to find this efficiently.

I didn't think to try the OSK defconfig in the omap tree. (Silly me, might have saved me some grief. :-)

Is there a maintainer for individual defconfig files? In other words, if I repair the OSK defconfig, who do I send it to?

-- Tim

=============================
Tim Bird
Architecture Group Chair, CE Linux Forum Senior Staff Engineer, Sony Corporation of America
=============================

#2 lore raw
Quoted 36 lines

-----Original Message-----
From: [email protected] [mailto:[email protected]] On Behalf Of Tim Bird
Sent: Monday, November 02, 2009 12:21 PM
To: Bill Gatliff
Cc: [email protected]
Subject: Re: Do defconfigs work for 2.6.32-rc5 mainline kernels?

Quoted 1 line · Bill Gatliff

I'm trying to build a kernel for beagleboard, using the

defconfig found

Quoted 3 lines

in 2.6.32-rc5 and the 2.6.32-rc5 source code.

Said kernel hangs after the uncompressor, I'm just trying

to figure out

Quoted 1 line

if this is a known issue or not. The defconfig in the

linux-omap tree

Quoted 1 line

does seem to work with the linux-omap source code, FWIW...

Short story:
I found that the omap OSK defconfig is broken in mainline also.

Long story:
I found that the defconfig in the mainline 2.6.32-rc1 kernel didn't work on an OMAP OSK board. Thinking there was some problem in the code itself, I bisected from a known working config on 2.6.29 all the way back up to 2.6.32-rc1. When I was done I was at the current code base, but with a .config that had about 650 differences.

I haven't had time to go back and find the individual config option that changed to break things. I would need some kind of "config bisect" to find this efficiently.

Quoted 6 lines

I didn't think to try the OSK defconfig in the omap tree. (Silly me, might have saved me some grief. :-)

Is there a maintainer for individual defconfig files? In other words, if I repair the OSK defconfig, who do I send it to?

Why don't you guys enable Kernel Low level prints and send the logs?

Otherwise its pretty hard to see what's wrong.

Regards,
Sergio

Quoted 16 lines

-- Tim

=============================
Tim Bird
Architecture Group Chair, CE Linux Forum Senior Staff Engineer, Sony Corporation of America
=============================

--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html

#3 lore raw
Quoted 36 lines · Aguirre Rodriguez, Sergio Alberto
Quoted 36 lines

-----Original Message-----
From: [email protected] [mailto:[email protected]] On Behalf Of Tim Bird
Sent: Monday, November 02, 2009 12:21 PM
To: Bill Gatliff
Cc: [email protected]
Subject: Re: Do defconfigs work for 2.6.32-rc5 mainline kernels?

Quoted 1 line · Bill Gatliff

I'm trying to build a kernel for beagleboard, using the

defconfig found

Quoted 3 lines

in 2.6.32-rc5 and the 2.6.32-rc5 source code.

Said kernel hangs after the uncompressor, I'm just trying

to figure out

Quoted 1 line

if this is a known issue or not. The defconfig in the

linux-omap tree

Quoted 1 line

does seem to work with the linux-omap source code, FWIW...

Short story:
I found that the omap OSK defconfig is broken in mainline also.

Long story:
I found that the defconfig in the mainline 2.6.32-rc1 kernel didn't work on an OMAP OSK board. Thinking there was some problem in the code itself, I bisected from a known working config on 2.6.29 all the way back up to 2.6.32-rc1. When I was done I was at the current code base, but with a .config that had about 650 differences.

I haven't had time to go back and find the individual config option that changed to break things. I would need some kind of "config bisect" to find this efficiently.

Quoted 6 lines
Quoted 6 lines

I didn't think to try the OSK defconfig in the omap tree. (Silly me, might have saved me some grief. :-)

Is there a maintainer for individual defconfig files? In other words, if I repair the OSK defconfig, who do I send it to?

Just send the fixes to this list as usual.

Quoted 1 line

Why don't you guys enable Kernel Low level prints and send the logs?

Right, maybe checkout omap-debug branch, and enable DEBUG_LL to see what happens? Also, some compilers have bugs with CONFIG_ARM_UNWIND=y AFAIK.

Quoted 1 line

Otherwise its pretty hard to see what's wrong.

Agreed. I've been booting various boards with the mainline kernel, including OSK here and there. There should not be anything seriously wrong. And we still have time to send in fixes for this -rc cycle.

Tony