somebody messed something on xc2028 code?
Hi all, I just updated my ubuntu to karmic and found with surprise that with 2.6.31 kernel my device does not work... It seems to be related to the xc2028 code part since the kernel explosion happens when you try to tune the device, here it's my dmesg, any idea?
Albert
[ 1622.032196] usb 1-1: new high speed USB device using ehci_hcd and address 4 [ 1622.166041] usb 1-1: configuration #1 chosen from 1 choice [ 1622.167341] dvb-usb: found a 'Pinnacle Expresscard 320cx' in cold state, will try to load a firmware [ 1622.167353] usb 1-1: firmware: requesting dvb-usb-dib0700-1.20.fw [ 1622.188465] dvb-usb: downloading firmware from file 'dvb-usb-dib0700-1.20.fw' [ 1622.396737] dib0700: firmware started successfully. [ 1622.900198] dvb-usb: found a 'Pinnacle Expresscard 320cx' in warm state. [ 1622.900308] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. [ 1622.900759] DVB: registering new adapter (Pinnacle Expresscard 320cx) [ 1623.157839] DVB: registering adapter 0 frontend 0 (DiBcom 7000PC)... [ 1623.158165] xc2028 4-0061: creating new instance [ 1623.158173] xc2028 4-0061: type set to XCeive xc2028/xc3028 tuner [ 1623.158333] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1a.7/usb1/1-1/input/input16 [ 1623.158418] dvb-usb: schedule remote query interval to 50 msecs. [ 1623.158427] dvb-usb: Pinnacle Expresscard 320cx successfully initialized and connected. [ 1670.979678] CE: hpet increasing min_delta_ns to 15000 nsec [ 1753.316527] BUG: unable to handle kernel NULL pointer dereference at 00000008 [ 1753.316543] IP: [<c03a8a13>] _request_firmware+0x1f3/0x250 [ 1753.316562] *pde = 00000000 [ 1753.316570] Oops: 0000 [#2] SMP [ 1753.316578] last sysfs file: /sys/devices/LNXSYSTM:00/device:00/PNP0C0A:00/power_supply/BAT0/charge_full [ 1753.316586] Modules linked in: tuner_xc2028 dvb_usb_dib0700 dib7000p dib7000m dvb_usb dvb_core dib3000mc dibx000_common dib0070 hidp binfmt_misc vboxnetflt vboxnetadp vboxdrv ppdev parport_pc snd_hda_codec_idt snd_hda_intel snd_hda_codec snd_hwdep snd_pcm_oss snd_mixer_oss snd_pcm arc4 ecb snd_seq_dummy snd_seq_oss iwlagn bridge stp bnep snd_seq_midi iwlcore snd_rawmidi joydev iptable_nat snd_seq_midi_event mac80211 nf_nat snd_seq nf_conntrack_ipv4 nf_conntrack nf_defrag_ipv4 snd_timer snd_seq_device iptable_mangle snd sbp2 dell_wmi psmouse iptable_filter serio_raw ip_tables soundcore x_tables snd_page_alloc cfg80211 uvcvideo videodev v4l1_compat sdhci_pci sdhci led_class lp btusb dell_laptop dcdbas nvidia(P) parport usbhid dm_raid45 xor ohci1394 video output ieee1394 tg3 intel_agp agpgart [ 1753.316753]
...
_______________________________________________
linux-dvb users mailing list
For V4L/DVB development, please use instead [email protected] [email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Quoted 47 lines · Albert Comerma
Hi all, I just updated my ubuntu to karmic and found with surprise that with 2.6.31 kernel my device does not work... It seems to be related to the xc2028 code part since the kernel explosion happens when you try to tune the device, here it's my dmesg, any idea?
Albert
[ 1622.032196] usb 1-1: new high speed USB device using ehci_hcd and address 4 [ 1622.166041] usb 1-1: configuration #1 chosen from 1 choice [ 1622.167341] dvb-usb: found a 'Pinnacle Expresscard 320cx' in cold state, will try to load a firmware [ 1622.167353] usb 1-1: firmware: requesting dvb-usb-dib0700-1.20.fw [ 1622.188465] dvb-usb: downloading firmware from file 'dvb-usb-dib0700-1.20.fw' [ 1622.396737] dib0700: firmware started successfully. [ 1622.900198] dvb-usb: found a 'Pinnacle Expresscard 320cx' in warm state. [ 1622.900308] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. [ 1622.900759] DVB: registering new adapter (Pinnacle Expresscard 320cx) [ 1623.157839] DVB: registering adapter 0 frontend 0 (DiBcom 7000PC)... [ 1623.158165] xc2028 4-0061: creating new instance [ 1623.158173] xc2028 4-0061: type set to XCeive xc2028/xc3028 tuner [ 1623.158333] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1a.7/usb1/1-1/input/input16 [ 1623.158418] dvb-usb: schedule remote query interval to 50 msecs. [ 1623.158427] dvb-usb: Pinnacle Expresscard 320cx successfully initialized and connected. [ 1670.979678] CE: hpet increasing min_delta_ns to 15000 nsec [ 1753.316527] BUG: unable to handle kernel NULL pointer dereference at 00000008 [ 1753.316543] IP: [<c03a8a13>] _request_firmware+0x1f3/0x250 [ 1753.316562] *pde = 00000000 [ 1753.316570] Oops: 0000 [#2] SMP [ 1753.316578] last sysfs file: /sys/devices/LNXSYSTM:00/device:00/PNP0C0A:00/power_supply/BAT0/charge_full [ 1753.316586] Modules linked in: tuner_xc2028 dvb_usb_dib0700 dib7000pdib7000m
dvb_usbdvb_coredib3000mcdibx000_commondib0070 hidpbinfmt_miscvboxnetflt vboxnetadp vboxdrv ppdevparport_pcsnd_hda_codec_idtsnd_hda_intelsnd_hda_codecsnd_hwdepsnd_pcm_osssnd_mixer_osssnd_pcmarc4 ecbsnd_seq_dummysnd_seq_ossiwlagn bridge stp bnepsnd_seq_midiiwlcoresnd_rawmidijoydeviptable_natsnd_seq_midi_eventmac80211nf_natsnd_seqnf_conntrack_ipv4nf_conntracknf_defrag_ipv4snd_timersnd_seq_deviceiptable_manglesnd sbp2dell_wmipsmouseiptable_filterserio_rawip_tablessoundcorex_tablessnd_page_alloccfg80211 uvcvideo videodevv4l1_compatsdhci_pcisdhciled_classlp btusbdell_laptopdcdbas nvidia(P) parport usbhiddm_raid45xor ohci1394 video output ieee1394 tg3intel_agpagpgart
Quoted 1 line
[ 1753.316753]
This was actually a regression related to the dib7000 driver and any tuner that uses request_firmware(). I checked in a fix for one board that hit it. It was introduced because 2.6.28 started using the first parameter passed to request_firmware(), and the dib7000 driver was sending null.
Can you clarify which bridge your device uses.
Devin
Signature · 2 lines
Devin J. Heitmueller - Kernel Labs http://www.kernellabs.com
Quoted 6 lines · Albert Comerma
Hi all, I just updated my ubuntu to karmic and found with surprise that with 2.6.31 kernel my device does not work... It seems to be related to the xc2028 code part since the kernel explosion happens when you try to tune the device, here it's my dmesg, any idea?
Albert
Oh, you're using the stock 2.6.31 which didn't get my fix yet. Please try the latest v4l-dvb tree and see if it still happens.
Devin
Signature · 2 lines
Devin J. Heitmueller - Kernel Labs http://www.kernellabs.com
Yes, it worked! the current tree works well. Thanks.
Albert
En/na Devin Heitmueller ha escrit:
Quoted 17 lines
Quoted 7 lines · Albert Comerma
Hi all, I just updated my ubuntu to karmic and found with surprise that with 2.6.31 kernel my device does not work... It seems to be related to the xc2028 code part since the kernel explosion happens when you try to tune the device, here it's my dmesg, any idea?
Albert
Oh, you're using the stock 2.6.31 which didn't get my fix yet. Please try the latest v4l-dvb tree and see if it still happens.
Devin
Quoted 19 lines · Devin Heitmueller
Quoted 6 lines · Albert Comerma
Hi all, I just updated my ubuntu to karmic and found with surprise that with 2.6.31 kernel my device does not work... It seems to be related to the xc2028 code part since the kernel explosion happens when you try to tune the device, here it's my dmesg, any idea?
Albert
Oh, you're using the stock 2.6.31 which didn't get my fix yet. Please try the latest v4l-dvb tree and see if it still happens.
Devin
--
Devin J. Heitmueller - Kernel Labs
http://www.kernellabs.com
Quoted 5 lines
_______________________________________________
linux-dvb users mailing list
For V4L/DVB development, please use instead [email protected] [email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Might this have something to with problems that I am having with the Dvico dual digital 4 with karmic?