Skip to contentSkip to conversation

Backlight not working after resume

DISCUSSION Jean-Denis Girard 1 participant 1 message Nov 1, 2009 ACPI

lore
Share & tools
lore
#0 lore raw

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Hi list,

I have a Samsung q30 ultra-portable; ACPI video seems supported by standard driver. After boot, backlight control works fine with the dedicated laptop keys, but it no longer works after suspend / resume. The laptop itself is still working: I can ssh, even X is working. I can add an external screen and everything is OK, it's just the panel backlight is off. I have tried several methods found on the Internet (setpci, xrandr, sysfs) without luck.

I can do:
echo x >/sys/class/backlight/acpi_video0/brightness
(x=0..7) to adjust brightness after boot. After resume, the command works, but has no effect.

Video is:
~ Intel Corporation 82852/855GM Integrated Graphics Device

I'm using KMS since 2.6.31-rc something (it was not working before). Before KMS, I used vbetool post to get my screen back on.

I filed a bug at freedesktop.org one month ago, there's more detail there (acpidump, ...):

	http://bugs.freedesktop.org/show_bug.cgi?id=24201

Problem persists with kernel version is 2.6.32-rc5.

I can provide more info, and I'm willing to try corrections / patches to solve this problem.

Thanks,
- --
Jean-Denis Girard

SysNux Systèmes Linux en Polynésie française
http://www.sysnux.pf/ Tél: +689 50 10 40 / GSM: +689 79 75 27
-----BEGIN PGP SIGNATURE-----

iEYEARECAAYFAkrt+BoACgkQuu7Rv+oOo/hkdwCdEUD7/TE8ZLpvbrStTchliNus Z2cAnRsDVUGZFKlqA2klZQDYOsb3NB2n
=faAb
-----END PGP SIGNATURE-----
--
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html