Skip to contentSkip to conversation

Problems with Terratec Cinergy C PCI (DVB-C)

DISCUSSION Justin Raug Veggerby 1 participant 1 message Nov 5, 2009 Media (V4L/DVB)

lore
Share & tools
lore
#0 lore raw

Hi there,

I am at the point where I almost give up.

I have tried to get my mediacenter to recognize and use the Terratech Cinergy C card, the lspci output looks like the lspci output on the wiki page about this card:
http://www.linuxtv.org/wiki/index.php/TerraTec_Cinergy_C_DVB-C

I am not a C programmer, but I have looked at the sources from:

http://mercurial.intuxication.org/hg/s2-liplianin

And from what I can tell (from inserting some debug printk) the tda10023_attach is called, but it fails as the id is returned as being 255. I know it reaches this line:
if ((id & 0xf0) != 0x70) goto error;

But it doesn't reach the printk below that:
printk("TDA10023: i2c-addr = 0x%02x, id = 0x%02x\n", state->config->demod_address, id);

Can anybody help me?

Best regards
Justin