Skip to contentSkip to conversation

exportfs: Warning: /adir does not support NFS export.

DISCUSSION Norbert van Bolhuis 2 participants 7 messages Nov 10, 2009 – Nov 12, 2009 3 messages not in the archive

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

I get the following exportfs 1.2.0 warning:

exportfs: Warning: /adir does not support NFS export.

Although everything works fine, I'm worried about this.

The directoy "/adir" is the path to a ISOZFS loop mounted image.
The ISO(Z)FS image itself resides on a UBIFS filesystem (/flashfs/isozfs_image.iso). The root dir ("/"), as well as "/adir" and "/flashfs" is initramfs.

So afaik I'm exporting a ISOFS, this is supported by nfsd (in the kernel), so why is the warning there ?

I know UBIFS doesn't support to be (nfsd) exported by the kernel, but ISO(Z)FS and initramfs do, right ?

Am I doing something illegal ?

any feedback is appreciated, please cc me in the reply as I am not subscribed.

#2 lore raw
In reply to a message not in the archive
Quoted 8 lines · Norbert van Bolhuis

I get the following exportfs 1.2.0 warning:

exportfs: Warning: /adir does not support NFS export.

Although everything works fine, I'm worried about this.

The directoy "/adir" is the path to a ISOZFS loop mounted image.

What's ISOZFS?

Quoted 10 lines

The ISO(Z)FS image itself resides on a UBIFS filesystem (/flashfs/isozfs_image.iso). The root dir ("/"), as well as "/adir" and "/flashfs" is initramfs.

So afaik I'm exporting a ISOFS, this is supported by nfsd (in the kernel), so why is the warning there ?

I know UBIFS doesn't support to be (nfsd) exported by the kernel, but ISO(Z)FS and initramfs do, right ?

Am I doing something illegal ?

Which distribution are you using? Is it something that worked before, and stopped working, or is this the first time you've tried it?

--b.

#3 lore raw
Quoted 11 lines · J. Bruce Fields
Quoted 7 lines · Norbert van Bolhuis

I get the following exportfs 1.2.0 warning:

exportfs: Warning: /adir does not support NFS export.

Although everything works fine, I'm worried about this.

The directoy "/adir" is the path to a ISOZFS loop mounted image.

What's ISOZFS?

The ISO9660 filesystem (with rockridge extension), see mkzftree(1).

Quoted 9 lines
Quoted 9 lines

The ISO(Z)FS image itself resides on a UBIFS filesystem (/flashfs/isozfs_image.iso). The root dir ("/"), as well as "/adir" and "/flashfs" is initramfs.

So afaik I'm exporting a ISOFS, this is supported by nfsd (in the kernel), so why is the warning there ?

I know UBIFS doesn't support to be (nfsd) exported by the kernel, but ISO(Z)FS and initramfs do, right ?

Quoted 6 lines
Quoted 1 line

Am I doing something illegal ?

Which distribution are you using? Is it something that worked before, and stopped working, or is this the first time you've tried it?

--b.

I'm building an embedded linux system.
This is the first time I try this.

#5 lore raw
In reply to a message not in the archive
Quoted 24 lines · Norbert van Bolhuis
Quoted 11 lines · J. Bruce Fields
Quoted 7 lines · Norbert van Bolhuis

I get the following exportfs 1.2.0 warning:

exportfs: Warning: /adir does not support NFS export.

Although everything works fine, I'm worried about this.

The directoy "/adir" is the path to a ISOZFS loop mounted image.

What's ISOZFS?

The ISO9660 filesystem (with rockridge extension), see mkzftree(1).

Quoted 9 lines
Quoted 9 lines

The ISO(Z)FS image itself resides on a UBIFS filesystem (/flashfs/isozfs_image.iso). The root dir ("/"), as well as "/adir" and "/flashfs" is initramfs.

So afaik I'm exporting a ISOFS, this is supported by nfsd (in the kernel), so why is the warning there ?

I know UBIFS doesn't support to be (nfsd) exported by the kernel, but ISO(Z)FS and initramfs do, right ?

Quoted 8 lines
Quoted 6 lines
Quoted 1 line

Am I doing something illegal ?

Which distribution are you using? Is it something that worked before, and stopped working, or is this the first time you've tried it?

--b.

I'm building an embedded linux system.

What source are you using for nfs-utils?

--b.

Quoted 2 lines

This is the first time I try this.

#8 lore raw
In reply to a message not in the archive
Quoted 9 lines · Norbert van Bolhuis
Quoted 3 lines

What source are you using for nfs-utils?

779cf81044e92cb51ad590960e7b3671 nfs-utils-1.2.0.tar.bz2

I got it from:
http://sourceforge.net/projects/nfs/files/nfs-utils/nfs-utils-1.2.0.tar.bz2

Thanks. From your description, yes, that sounds like a configuration that should work. But maybe there's some detail wrong--could you show us the full output of the "mount" and "exportfs -v" commands?

--b.

#9 lore raw
Quoted 5 lines

Thanks. From your description, yes, that sounds like a configuration that should work. But maybe there's some detail wrong--could you show us the full output of the "mount" and "exportfs -v" commands?

ok.

# mount
proc on /proc type proc (rw)
devpts on /dev/pts type devpts (rw,gid=5,mode=620)
sysfs on /sys type sysfs (rw)
ubi0:rootfs on /flashfs type ubifs (rw)
/flashfs/isd0 on /mountedisd type iso9660 (rw,loop=/dev/loop0,offset=1024)
# exportfs -v
/mountedisd     172.31.0.0/255.255.0.0(ro,wdelay,no_root_squash,no_subtree_check)

thanks for helping me with this.