Skip to contentSkip to conversation

linux-omap-2.6 does not allow configuring rt2xx

DISCUSSION Sid Boyce 2 participants 3 messages Nov 10, 2009 – Nov 11, 2009

lore
Share & tools
lore

Sid Boyce

author
#0 lore raw

Spotted over the last few days.
"make ARCH=arm CROSS_COMPILE=/opt/arm-2009q1/bin/arm-none-linux/gnueabi- omap3_beagle_defconfig", then xconfig/menuconfig/config, the option never shows up.
Regards
Sid.

Signature · 4 lines
Sid Boyce ... Hamradio License G3VBV, Licensed Private Pilot
Emeritus IBM/Amdahl Mainframes and Sun/Fujitsu Servers Tech Support
Specialist, Cricket Coach
Microsoft Windows Free Zone - Linux used for all Computing Tasks
#1 lore raw
Quoted 4 lines · Sid Boyce

Spotted over the last few days.
"make ARCH=arm CROSS_COMPILE=/opt/arm-2009q1/bin/arm-none-linux/gnueabi- omap3_beagle_defconfig", then xconfig/menuconfig/config, the option never shows up.

Have you tried enabling cfg80211 and mac80211 in "Networking support -> Wireless"?

Quoted 2 lines

Regards
Sid.

Signature · 2 lines
Sincerely yours,
Mike.
author
#2 lore raw
Quoted 13 lines · Mike Rapoport
Quoted 4 lines · Sid Boyce

Spotted over the last few days.
"make ARCH=arm CROSS_COMPILE=/opt/arm-2009q1/bin/arm-none-linux/gnueabi- omap3_beagle_defconfig", then xconfig/menuconfig/config, the option never shows up.

Have you tried enabling cfg80211 and mac80211 in "Networking support -> Wireless"?

Quoted 2 lines

Regards
Sid.

Thanks, that did it. I thought I had tried those earlier. Regards
Sid.

Signature · 4 lines
Sid Boyce ... Hamradio License G3VBV, Licensed Private Pilot
Emeritus IBM/Amdahl Mainframes and Sun/Fujitsu Servers Tech Support
Specialist, Cricket Coach
Microsoft Windows Free Zone - Linux used for all Computing Tasks