Skip to contentSkip to conversation

Subject: RE: port bound SAs : ip xfm state command ?

DISCUSSION ramaswamy.bm 2 participants 2 messages Nov 11, 2009

lore
Share & tools
lore
#0 lore raw

What is the command to write port based SA's using ip xfrm state.

iam using below command for writing SA's : ip xfrm state add src 192.168.1.20 dst 192.168.1.5 proto esp spi 0x354cb04b mode tunnel reqid 16385 replay-window 32 auth sha1 0xecf02a5cf6568556e1bdcd961c7ec3f92afd01cc enc aes 0x5c0cfa9672ce67ba545b593076dfb278 sel src 0.0.0.0/0 dst 0.0.0.0/0

Thanks in advance Ram

he pfkey / xfrm interface throws them away

i fixed racoon to send the port numbers and they were ignored

-----Original Message-----
From: Patrick McHardy [mailto:[email protected]] Sent: Tuesday, January 27, 2009 9:12 AM
To: Paul Moore
Cc: David Miller; [email protected]
Subject: Re: port bound SAs

Quoted 1 line · Paul Moore

i did exactly that (in the original message) and it makes this test

case

Quoted 6 lines

work but as I point out

a) it should not be necessary b) i get more SAs than I need
c) i can no longer say that a SA is optional (this is an error in the pfkey/xfrm/racoon interface to combine two orthogonal concepts)
d) I am not convinced that I have resolved all cases. Needs more

testing

IIRC I tested port selectors in SA a few years ago using "ip xfrm"
and they worked fine. The xfrm interface doesn't ignore them (copy_from_user_state()), I think the pfkey interface also doesn't.

Please try configuring them manually using "ip xfrm state", I'm pretty sure the bug is actually in racoon.
--
To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html

#1 lore raw
Quoted 7 lines · ramaswamy.bm

What is the command to write port based SA's using ip xfrm state.

iam using below command for writing SA's : ip xfrm state add src 192.168.1.20 dst 192.168.1.5 proto esp spi 0x354cb04b mode tunnel reqid 16385 replay-window 32 auth sha1 0xecf02a5cf6568556e1bdcd961c7ec3f92afd01cc enc aes 0x5c0cfa9672ce67ba545b593076dfb278 sel src 0.0.0.0/0 dst 0.0.0.0/0

Usually you don't want port-based SAs but port-based policies. The syntax is described in "ip xfrm policy help". Look for sport and dport.

Cheers,

Signature · 4 lines
Visit Openswan at http://www.openswan.org/
Email: Herbert Xu ~{PmV>HI~} <[email protected]>
Home Page: http://gondor.apana.org.au/~herbert/
PGP Key: http://gondor.apana.org.au/~herbert/pubkey.txt