Reading /dev/mem by dd
Hello everyone!
I've found strange behavior of reading /dev/mem:
for i in 0 1 2; do
echo $i
dd if=/dev/mem of=/dev/null skip=$((6+$i)) bs=$((0x20000000)) count=1
done
On some systems with Supermicro X8DTU I've got several messages during first 512Mb starting from 0xc000_0000:
"BUG: soft lockup - CPU#xx stuck for 61s!"
On other systems with the sameboard I've stuck without any errors at last 10Mb before 0x1_0000_0000. Local APIC access?
On E5440 (Dell PowerEdge 1950) I've just got several:
APIC error on CPU3: 00(80)
APIC error on CPU3: 80(80)
...
APIC error on CPU3: 80(80)
That looks like wrong register access.
[E5530] $ cat /proc/iomem 00000000-0000ffff : reserved 00010000-0009dbff : System RAM 0009dc00-0009ffff : reserved 000c0000-000cffff : pnp 00:0e 000e0000-000fffff : reserved 00100000-bf77ffff : System RAM
00200000-006a37de : Kernel code 006a37df-0091a57f : Kernel data 00a68000-00b7cbaf : Kernel bss
bf78e000-bf78ffff : reserved bf790000-bf79dfff : ACPI Tables bf79e000-bf7cffff : ACPI Non-volatile Storage bf7d0000-bf7dffff : reserved bf7ec000-bfffffff : reserved e0000000-efffffff : PCI MMCONFIG 0
e0000000-efffffff : reserved
e0000000-efffffff : pnp 00:0d
f9000000-f9ffffff : PCI Bus 0000:07
f9000000-f9ffffff : 0000:07:01.0
faeda000-faeda0ff : 0000:00:1f.3 faedc000-faedc3ff : 0000:00:1d.7
faedc000-faedc3ff : ehci_hcd
faede000-faede3ff : 0000:00:1a.7
faede000-faede3ff : ehci_hcd
faee0000-faee3fff : 0000:00:16.7 faee4000-faee7fff : 0000:00:16.6 faee8000-faeebfff : 0000:00:16.5 faeec000-faeeffff : 0000:00:16.4 faef0000-faef3fff : 0000:00:16.3 faef4000-faef7fff : 0000:00:16.2 faef8000-faefbfff : 0000:00:16.1 faefc000-faefffff : 0000:00:16.0 faf00000-faffffff : PCI Bus 0000:01
faf00000-faf1ffff : 0000:01:00.1 faf3c000-faf3ffff : 0000:01:00.1
faf3c000-faf3ffff : igb
faf40000-faf5ffff : 0000:01:00.1
faf40000-faf5ffff : igb
faf60000-faf7ffff : 0000:01:00.1
faf60000-faf7ffff : igb
faf80000-faf9ffff : 0000:01:00.0 fafbc000-fafbffff : 0000:01:00.0
fafbc000-fafbffff : igb
fafc0000-fafdffff : 0000:01:00.0
fafc0000-fafdffff : igb
fafe0000-faffffff : 0000:01:00.0
fafe0000-faffffff : igb
fb000000-fbefffff : PCI Bus 0000:07
fb000000-fb7fffff : 0000:07:01.0 fbefc000-fbefffff : 0000:07:01.0
fec00000-fec00fff : IOAPIC 0
fec00000-fec00fff : pnp 00:0c
fed00000-fed003ff : HPET 0 fed1c000-fed1ffff : pnp 00:01
fed1c000-fed1ffff : pnp 00:0a
fed20000-fed3ffff : pnp 00:0a fed40000-fed8ffff : pnp 00:0a fee00000-fee00fff : Local APIC
fee00000-fee00fff : reserved
fee00000-fee00fff : pnp 00:0c
ffc00000-ffffffff : reserved 100000000-13fffffff : System RAM
[ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009dc00 (usable) [ 0.000000] BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bf780000 (usable) [ 0.000000] BIOS-e820: 00000000bf78e000 - 00000000bf790000 type 9 [ 0.000000] BIOS-e820: 00000000bf790000 - 00000000bf79e000 (ACPI data) [ 0.000000] BIOS-e820: 00000000bf79e000 - 00000000bf7d0000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bf7d0000 - 00000000bf7e0000 (reserved) [ 0.000000] BIOS-e820: 00000000bf7ec000 - 00000000c0000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ffc00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
[E5440] $ cat /proc/iomem 00000000-0009ffff : System RAM
00000000-00000000 : Crash kernel
000a0000-000bffff : Video RAM area 000c0000-000c7fff : Video ROM 000c9000-000c9fff : Adapter ROM 000ca000-000cfbff : Adapter ROM 000d0000-000d1dff : Adapter ROM 000d2000-000d71ff : Adapter ROM 000f0000-000fffff : System ROM 00100000-bfb4ffff : System RAM
00200000-003e1fbc : Kernel code 003e1fbd-004bafe7 : Kernel data
bfb50000-bfb65fff : reserved bfb66000-bfb85bff : ACPI Tables bfb85c00-bfffffff : reserved d0000000-d7ffffff : PCI Bus #10
d0000000-d7ffffff : 0000:10:0d.0
d8000000-d80fffff : PCI Bus #0c
d8000000-d80fffff : PCI Bus #0d
d80f0000-d80fffff : 0000:0d:0e.0
d80f0000-d80fffff : megasas: LSI Logic
e0000000-efffffff : reserved f2000000-f7ffffff : PCI Bus #04
f4000000-f7ffffff : PCI Bus #05
f4000000-f7ffffff : PCI Bus #06
f4000000-f7ffffff : PCI Bus #07
f4000000-f5ffffff : 0000:07:00.0
f4000000-f5ffffff : bnx2
f8000000-fbffffff : PCI Bus #02
f8000000-fbffffff : PCI Bus #03
f8000000-f9ffffff : 0000:03:00.0
f8000000-f9ffffff : bnx2fc100000-fc2fffff : PCI Bus #10
fc100000-fc11ffff : 0000:10:0d.0 fc2d0000-fc2dffff : 0000:10:0d.0
fc300000-fc5fffff : PCI Bus #0c
fc400000-fc5fffff : PCI Bus #0d
fc400000-fc407fff : 0000:0d:0e.0 fc5c0000-fc5dffff : 0000:0d:0e.0
fc5c0000-fc5dffff : megasas: LSI Logic
fc600000-fc8fffff : PCI Bus #01
fc7e0000-fc7effff : 0000:01:00.0 fc7fc000-fc7fffff : 0000:01:00.0 fc800000-fc8fffff : 0000:01:00.0
fc900000-fc9003ff : 0000:00:1d.7
fc900000-fc9003ff : ehci_hcd
fe000000-ffffffff : reserved 100000000-43fffffff : System RAM
HP - ProLiant DL160G6 says:
http://www.pixsup.com/uploads/7134cd3e33.png
Rgds,
Anton
Quoted 9 lines · Anton D. Kachalov
Hello everyone!
I've found strange behavior of reading
/dev/mem:for i in 0 1 2; do
echo $i
dd if=/dev/mem of=/dev/null skip=$((6+$i)) bs=$((0x20000000)) count=1
done
Quoted 7 lines
On some systems with Supermicro X8DTU I've got several messages during first 512Mb starting from 0xc000_0000:
"BUG: soft lockup - CPU#xx stuck for 61s!"
On other systems with the sameboard I've stuck without any errors at last 10Mb before 0x1_0000_0000. Local APIC access?
What is the full backtrace? And which version of kernel are you running?
Quoted 147 lines
On E5440 (Dell PowerEdge 1950) I've just got several:
APIC error on CPU3: 00(80)
APIC error on CPU3: 80(80)
...
APIC error on CPU3: 80(80)
That looks like wrong register access.[E5530] $ cat
/proc/iomem
00000000-0000ffff : reserved
00010000-0009dbff : System RAM
0009dc00-0009ffff : reserved
000c0000-000cffff : pnp 00:0e
000e0000-000fffff : reserved
00100000-bf77ffff : System RAM
00200000-006a37de : Kernel code
006a37df-0091a57f : Kernel data
00a68000-00b7cbaf : Kernel bss
bf78e000-bf78ffff : reserved
bf790000-bf79dfff : ACPI Tables
bf79e000-bf7cffff : ACPI Non-volatile Storage
bf7d0000-bf7dffff : reserved
bf7ec000-bfffffff : reserved
e0000000-efffffff : PCI MMCONFIG 0
e0000000-efffffff : reserved
e0000000-efffffff : pnp 00:0d
f9000000-f9ffffff : PCI Bus 0000:07
f9000000-f9ffffff : 0000:07:01.0
faeda000-faeda0ff : 0000:00:1f.3
faedc000-faedc3ff : 0000:00:1d.7
faedc000-faedc3ff :ehci_hcd
faede000-faede3ff : 0000:00:1a.7
faede000-faede3ff :ehci_hcd
faee0000-faee3fff : 0000:00:16.7
faee4000-faee7fff : 0000:00:16.6
faee8000-faeebfff : 0000:00:16.5
faeec000-faeeffff : 0000:00:16.4
faef0000-faef3fff : 0000:00:16.3
faef4000-faef7fff : 0000:00:16.2
faef8000-faefbfff : 0000:00:16.1
faefc000-faefffff : 0000:00:16.0
faf00000-faffffff : PCI Bus 0000:01
faf00000-faf1ffff : 0000:01:00.1
faf3c000-faf3ffff : 0000:01:00.1
faf3c000-faf3ffff : igb
faf40000-faf5ffff : 0000:01:00.1
faf40000-faf5ffff : igb
faf60000-faf7ffff : 0000:01:00.1
faf60000-faf7ffff : igb
faf80000-faf9ffff : 0000:01:00.0
fafbc000-fafbffff : 0000:01:00.0
fafbc000-fafbffff : igb
fafc0000-fafdffff : 0000:01:00.0
fafc0000-fafdffff : igb
fafe0000-faffffff : 0000:01:00.0
fafe0000-faffffff : igb
fb000000-fbefffff : PCI Bus 0000:07
fb000000-fb7fffff : 0000:07:01.0
fbefc000-fbefffff : 0000:07:01.0
fec00000-fec00fff : IOAPIC 0
fec00000-fec00fff : pnp 00:0c
fed00000-fed003ff : HPET 0
fed1c000-fed1ffff : pnp 00:01
fed1c000-fed1ffff : pnp 00:0a
fed20000-fed3ffff : pnp 00:0a
fed40000-fed8ffff : pnp 00:0a
fee00000-fee00fff : Local APIC
fee00000-fee00fff : reserved
fee00000-fee00fff : pnp 00:0c
ffc00000-ffffffff : reserved
100000000-13fffffff : System RAM[ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009dc00 (usable) [ 0.000000] BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bf780000 (usable) [ 0.000000] BIOS-e820: 00000000bf78e000 - 00000000bf790000 type 9 [ 0.000000] BIOS-e820: 00000000bf790000 - 00000000bf79e000 (ACPI data) [ 0.000000] BIOS-e820: 00000000bf79e000 - 00000000bf7d0000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bf7d0000 - 00000000bf7e0000 (reserved) [ 0.000000] BIOS-e820: 00000000bf7ec000 - 00000000c0000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ffc00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000140000000 (usable)[E5440] $ cat
/proc/iomem
00000000-0009ffff : System RAM
00000000-00000000 : Crash kernel
000a0000-000bffff : Video RAM area
000c0000-000c7fff : Video ROM
000c9000-000c9fff : Adapter ROM
000ca000-000cfbff : Adapter ROM
000d0000-000d1dff : Adapter ROM
000d2000-000d71ff : Adapter ROM
000f0000-000fffff : System ROM
00100000-bfb4ffff : System RAM
00200000-003e1fbc : Kernel code
003e1fbd-004bafe7 : Kernel data
bfb50000-bfb65fff : reserved
bfb66000-bfb85bff : ACPI Tables
bfb85c00-bfffffff : reserved
d0000000-d7ffffff : PCI Bus #10
d0000000-d7ffffff : 0000:10:0d.0
d8000000-d80fffff : PCI Bus #0c
d8000000-d80fffff : PCI Bus #0d
d80f0000-d80fffff : 0000:0d:0e.0d80f0000-d80fffff : megasas: LSI Logice0000000-efffffff : reserved
f2000000-f7ffffff : PCI Bus #04
f4000000-f7ffffff : PCI Bus #05
f4000000-f7ffffff : PCI Bus #06f4000000-f7ffffff : PCI Bus #07 f4000000-f5ffffff : 0000:07:00.0 f4000000-f5ffffff : bnx2 f8000000-fbffffff : PCI Bus #02 f8000000-fbffffff : PCI Bus #03 f8000000-f9ffffff : 0000:03:00.0 f8000000-f9ffffff : bnx2fc100000-fc2fffff : PCI Bus #10
fc100000-fc11ffff : 0000:10:0d.0
fc2d0000-fc2dffff : 0000:10:0d.0
fc300000-fc5fffff : PCI Bus #0c
fc400000-fc5fffff : PCI Bus #0d
fc400000-fc407fff : 0000:0d:0e.0
fc5c0000-fc5dffff : 0000:0d:0e.0
fc5c0000-fc5dffff : megasas: LSI Logic
fc600000-fc8fffff : PCI Bus #01
fc7e0000-fc7effff : 0000:01:00.0
fc7fc000-fc7fffff : 0000:01:00.0
fc800000-fc8fffff : 0000:01:00.0
fc900000-fc9003ff : 0000:00:1d.7
fc900000-fc9003ff :ehci_hcd
fe000000-ffffffff : reserved
100000000-43fffffff : System RAMHP - ProLiant DL160G6 says:
http://www.pixsup.com/uploads/7134cd3e33.pngRgds,
Anton
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Signature · 1 line
Live like a child, think like the god.
Quoted 13 lines · Américo Wang
Quoted 11 lines · Anton D. Kachalov
Hello everyone!
I've found strange behavior of reading
/dev/mem:for i in 0 1 2; do
echo $i
dd if=/dev/mem of=/dev/null skip=$((6+$i)) bs=$((0x20000000)) count=1
doneOn some systems with Supermicro X8DTU I've got several messages during first 512Mb starting from 0xc000_0000:
Quoted 10 lines
Quoted 4 lines
"BUG: soft lockup - CPU#xx stuck for 61s!"
On other systems with the sameboard I've stuck without any errors at last 10Mb before 0x1_0000_0000. Local APIC access?
What is the full backtrace? And which version of kernel are you running?
Ubuntu 2.6.28-16-server and 2.6.31-11-server.
Nov 10 17:59:10 localhost kernel: [ 243.749254] BUG: soft lockup - CPU#11 stuck for 61s! [dd:4325] Nov 10 17:59:10 localhost kernel: [ 243.749256] Modules linked in: ip_queue ipt_LOG xt_limit ipt_REJECT nf_conntrack_ipv4 nf_defrag_ipv4 xt_state xt_tcpudp x t_multiport xt_NOTRACK nf_conntrack iptable_raw video output iptable_filter ip_tables x_tables dummy parport_pc lp parport igb dca snd_pcm serio_raw snd_timer snd soundcore snd_page_alloc iTCO_wdt iTCO_vendor_support shpchp pcspkr raid10 raid456 raid6_pq async_xor async_memcpy async_tx xor raid1 raid0 multipath linear fbcon tileblit font bitblit softcursor Nov 10 17:59:10 localhost kernel: [ 243.749282] CPU 11: Nov 10 17:59:10 localhost kernel: [ 243.749284] Modules linked in: ip_queue ipt_LOG xt_limit ipt_REJECT nf_conntrack_ipv4 nf_defrag_ipv4 xt_state xt_tcpudp xt_multiport xt_NOTRACK nf_conntrack iptable_raw video output iptable_filter ip_tables x_tables dummy parport_pc lp parport igb dca snd_pcm serio_raw snd_timer snd soundcore snd_page_alloc iTCO_wdt iTCO_vendor_support shpchp pcspkr raid10 raid456 raid6_pq async_xor async_memcpy async_tx xor raid1 raid0 multipath linear fbcon tileblit font bitblit softcursor Nov 10 17:59:10 localhost kernel: [ 243.749305] Pid: 4325, comm: dd Not tainted 2.6.31-11-server #36ya3 X8DTU Nov 10 17:59:10 localhost kernel: [ 243.749307] RIP: 0010:[<ffffffff81061fd5>] [<ffffffff81061fd5>] r_next+0x5/0x30 Nov 10 17:59:10 localhost kernel: [ 243.749316] RSP: 0018:ffff88012b55fe48 EFLAGS: 00000206 Nov 10 17:59:10 localhost kernel: [ 243.749317] RAX: ffff8800280211e0 RBX: ffff88012b55fe88 RCX: 0000000000000118 Nov 10 17:59:10 localhost kernel: [ 243.749319] RDX: ffff88012b55fe60 RSI: ffff8800280211e0 RDI: 0000000000000000 Nov 10 17:59:10 localhost kernel: [ 243.749320] RBP: ffffffff81012aee R08: 000000000000000e R09: ffffffff81795be0 Nov 10 17:59:10 localhost kernel: [ 243.749322] R10: 8000000000000563 R11: 8000000000000573 R12: ffffffff81516179 Nov 10 17:59:10 localhost kernel: [ 243.749323] R13: ffff88012b55fdf8 R14: ffffffff81078449 R15: ffff88012b55fda8 Nov 10 17:59:10 localhost kernel: [ 243.749325] FS: 00007fb8fe3646e0(0000) GS:ffff880028161000(0000) knlGS:0000000000000000 Nov 10 17:59:10 localhost kernel: [ 243.749327] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b Nov 10 17:59:10 localhost kernel: [ 243.749328] CR2: 00007fb8de930000 CR3: 000000012b4fd000 CR4: 00000000000006a0 Nov 10 17:59:10 localhost kernel: [ 243.749330] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 Nov 10 17:59:10 localhost kernel: [ 243.749331] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Nov 10 17:59:10 localhost kernel: [ 243.749333] Call Trace: Nov 10 17:59:10 localhost kernel: [ 243.749337] [<ffffffff8106294a>] ? iomem_is_exclusive+0x8a/0xb0 Nov 10 17:59:10 localhost kernel: [ 243.749342] [<ffffffff81037cbc>] ? devmem_is_allowed+0x2c/0x50 Nov 10 17:59:10 localhost kernel: [ 243.749346] [<ffffffff812e2828>] ? read_mem+0xa8/0x180 Nov 10 17:59:10 localhost kernel: [ 243.749350] [<ffffffff81117314>] ? vfs_read+0xc4/0x190 Nov 10 17:59:10 localhost kernel: [ 243.749352] [<ffffffff81117530>] ? sys_read+0x50/0x90 Nov 10 17:59:10 localhost kernel: [ 243.749356] [<ffffffff81011f42>] ? system_call_fastpath+0x16/0x1b
Same problem with soft lockup I have on this platform under heavy system load but I can't get backtrace for it...
Quoted 17 lines · Anton D. Kachalov
Hello everyone!
I've found strange behavior of reading
/dev/mem:for i in 0 1 2; do
echo $i
dd if=/dev/mem of=/dev/null skip=$((6+$i)) bs=$((0x20000000)) count=1 doneOn some systems with Supermicro X8DTU I've got several messages during first 512Mb starting from 0xc000_0000:
"BUG: soft lockup - CPU#xx stuck for 61s!"
On other systems with the sameboard I've stuck without any errors at last 10Mb before 0x1_0000_0000. Local APIC access?
Quoted 6 lines
On E5440 (Dell PowerEdge 1950) I've just got several:
APIC error on CPU3: 00(80)
APIC error on CPU3: 80(80)
...
APIC error on CPU3: 80(80)
That looks like wrong register access.
I don't think that we prevent any access to device registers in /dev/mem - if you read something that has side effects and something breaks, well I guess you get to keep both pieces :-) There's a reason it's root-only..
Quoted 4 lines · Robert Hancock
I don't think that we prevent any access to device registers in
/dev/mem- if you read something that has side effects and something breaks, well I guess you get to keep both pieces :-) There's a reason it's root-only..
We should. Imaging /dev/mem is one of the oldest tricks in the book of the forensics people, they do it to live systems to help track down WTF happened to a compromised host. This kind of crap bites them hard.
IMO: if you're going to provide /dev/mem, make it as safe as possible.
Signature · 4 lines
"One disk to rule them all, One disk to find them. One disk to bring them all and in the darkness grind them. In the Land of Redmond where the shadows lie." -- The Silicon Valley Tarot Henrique Holschuh
Quoted 9 lines · On Thu, 12 Nov 2009 00:12:09 -0200 Henrique de Moraes Holschuh…
Quoted 4 lines · Robert Hancock
I don't think that we prevent any access to device registers in
/dev/mem- if you read something that has side effects and something breaks, well I guess you get to keep both pieces :-) There's a reason it's root-only..We should. Imaging
/dev/memis one of the oldest tricks in the book of the forensics people, they do it to live systems to help track down WTF happened to a compromised host. This kind of crap bites them hard.
Any forensics person who images /dev/mem needs to go back to school.
Alan
Quoted 8 lines · Alan Cox
Quoted 6 lines · On Thu, 12 Nov 2009 00:12:09 -0200 Henrique de Moraes Holschuh…
Quoted 4 lines · Robert Hancock
I don't think that we prevent any access to device registers in
/dev/mem- if you read something that has side effects and something breaks, well I guess you get to keep both pieces :-) There's a reason it's root-only..
Quoted 6 lines
Quoted 4 lines
We should. Imaging
/dev/memis one of the oldest tricks in the book of the forensics people, they do it to live systems to help track down WTF happened to a compromised host. This kind of crap bites them hard.Any forensics person who images
/dev/memneeds to go back to school.
While I do agree with you, I can assure you they do it all the time at least around here, and it is still listed as "best practice" in the notebooks of many.
Signature · 4 lines
"One disk to rule them all, One disk to find them. One disk to bring them all and in the darkness grind them. In the Land of Redmond where the shadows lie." -- The Silicon Valley Tarot Henrique Holschuh
Quoted 5 lines
Quoted 1 line
Any forensics person who images
/dev/memneeds to go back to school.While I do agree with you, I can assure you they do it all the time at least around here, and it is still listed as "best practice" in the notebooks of many.
Oh dear me. Well the purpose of the kernel isn't to provide an idiot filter, that is what the security policies and not giving people root is for.
You have a people problem. Technical fixes to people problems rarely work.
Quoted 4 lines · Henrique de Moraes Holschuh
We should. Imaging
/dev/memis one of the oldest tricks in the book of the forensics people, they do it to live systems to help track down WTF happened to a compromised host. This kind of crap bites them hard.
It seems more like a case of hurting themselves.
Quoted 2 lines
IMO: if you're going to provide
/dev/mem, make it as safe as possible.
That would also make it useless for people who want to access MMIO using /dev/mem. Which is a lot of programs.
-Andi
Signature · 1 line
[email protected] -- Speaking for myself only.
Quoted 6 lines · Andi Kleen
Quoted 2 lines · Henrique de Moraes Holschuh
IMO: if you're going to provide
/dev/mem, make it as safe as possible.That would also make it useless for people who want to access MMIO using
/dev/mem. Which is a lot of programs.
In this case, the problem seems to be access over /dev/mem to stuff the kernel is already taking care of. Certainly "as safe as possible" does not have to mean making /dev/mem useless for whatever good uses it has.
Signature · 4 lines
"One disk to rule them all, One disk to find them. One disk to bring them all and in the darkness grind them. In the Land of Redmond where the shadows lie." -- The Silicon Valley Tarot Henrique Holschuh
Quoted 2 lines
In this case, the problem seems to be access over
/dev/memto stuff the kernel is already taking care of. Certainly "as safe as possible" does
Which is often what is desired - eg debugging driver stuff.
Quoted 1 line
not have to mean making
/dev/memuseless for whatever good uses it has.
It does. Plain and simple.
Quoted 8 lines · Alan Cox
Quoted 2 lines
In this case, the problem seems to be access over
/dev/memto stuff the kernel is already taking care of. Certainly "as safe as possible" doesWhich is often what is desired - eg debugging driver stuff.
Quoted 1 line
not have to mean making
/dev/memuseless for whatever good uses it has.It does. Plain and simple.
Is that the only valid use of /dev/mem, or even its main use?
Signature · 4 lines
"One disk to rule them all, One disk to find them. One disk to bring them all and in the darkness grind them. In the Land of Redmond where the shadows lie." -- The Silicon Valley Tarot Henrique Holschuh
Quoted 11 lines · On Thu, 12 Nov 2009 15:57:49 -0200 "Henrique de Moraes Holschuh"…
Quoted 8 lines · Alan Cox
Quoted 2 lines
In this case, the problem seems to be access over
/dev/memto stuff the kernel is already taking care of. Certainly "as safe as possible" doesWhich is often what is desired - eg debugging driver stuff.
Quoted 1 line
not have to mean making
/dev/memuseless for whatever good uses it has.It does. Plain and simple.
Is that the only valid use of
/dev/mem, or even its main use?
These days it is the primary use. Things like X11 were historically probably the biggest user of it, and things like LRMI sometimes need that sort of stuff.
The X case also involves X and the kernel both working with the same resource and in many cases that resource having registers that can crash a system if mis-accessed.
Alan
Quoted 9 lines · Alan Cox
Quoted 7 lines · On Thu, 12 Nov 2009 15:57:49 -0200 "Henrique de Moraes Holschuh"…
Quoted 5 lines · Alan Cox
Quoted 3 lines
In this case, the problem seems to be access over
/dev/memto stuff the kernel is already taking care of. Certainly "as safe as possible" doesWhich is often what is desired - eg debugging driver stuff.
[...]
Quoted 5 lines
Quoted 1 line
Is that the only valid use of
/dev/mem, or even its main use?These days it is the primary use. Things like X11 were historically probably the biggest user of it, and things like LRMI sometimes need that sort of stuff.
Well, if debugging is the primary use, maybe the best long term plan would be to get rid of the need for /dev/mem for anything other than debugging, and after that is accomplished, move it to debugfs or make it optional?
Quoted 3 lines
The X case also involves X and the kernel both working with the same resource and in many cases that resource having registers that can crash a system if mis-accessed.
I see. That also tells me that whatever dark sides KMS has, it is much better than the alternative :-)
Signature · 4 lines
"One disk to rule them all, One disk to find them. One disk to bring them all and in the darkness grind them. In the Land of Redmond where the shadows lie." -- The Silicon Valley Tarot Henrique Holschuh
Quoted 4 lines
Well, if debugging is the primary use, maybe the best long term plan would be to get rid of the need for
/dev/memfor anything other than debugging, and after that is accomplished, move it to debugfs or make it optional?
/dev/mem is ABI and API. It's also part of Unix tradition and all sorts of other stuff. It's just fine where it is.
Quoted 6 lines
Quoted 3 lines
The X case also involves X and the kernel both working with the same resource and in many cases that resource having registers that can crash a system if mis-accessed.
I see. That also tells me that whatever dark sides KMS has, it is much better than the alternative :-)
Modern video doesn't really fit the simple kernel frame buffer model anyway but it is important that the kernel now manages the resources for all sorts of reasons including hotplug.
Quoted 2 lines · Henrique de Moraes Holschuh
In this case, the problem seems to be access over
/dev/memto stuff the kernel is already taking care of.
Not sure if local APIC counts as "PCI space and the BIOS code and data regions" but:
$ grep STRICT_DEVMEM -A 15 arch/x86/Kconfig.debug
config STRICT_DEVMEM
bool "Filter access to /dev/mem"
---help---
If this option is disabled, you allow userspace (root) access to all
of memory, including kernel and userspace memory. Accidental
access to this is obviously disastrous, but specific access can
be used by people debugging the kernel. Note that with PAT support
enabled, even in this case there are restrictions on /dev/mem
use due to the cache aliasing requirements. If this option is switched on, the /dev/mem file only allows userspace access to PCI space and the BIOS code and data regions. This is sufficient for dosemu and X and all common users of /dev/mem.
If in doubt, say Y.
Quoted 2 lines
Certainly "as safe as possible" does
not have to mean making/dev/memuseless for whatever good uses it has.
For debugging you need absolutely full access to whole address space(s). One mistake (or intentional action) and the system is dead, this is by design. It's BTW not very dangerous, compared to accessing flash ROM/EEPROM/"fuses"/FPGA/CPLD/etc.
Signature · 1 line
Krzysztof Halasa
Quoted 5 lines · Krzysztof Halasa
Quoted 2 lines · Henrique de Moraes Holschuh
In this case, the problem seems to be access over
/dev/memto stuff the kernel is already taking care of.
Quoted 8 lines
Not sure if local APIC counts as "PCI space and the BIOS code and data regions" but:
$ grep STRICT_DEVMEM -A 15 arch/x86/Kconfig.debug config STRICT_DEVMEM bool "Filter access to /dev/mem" ---help---
Yes, having this option turned on an access to LAPIC/IO_APIC space will be forbidden.
-- Cyrill