Skip to contentSkip to conversation

How to help with RTL2832U based TV?

DISCUSSION Peter Rasmussen 2 participants 2 messages Dec 3, 2009 Media (V4L/DVB)

lore
Share & tools
lore
#0 lore raw

I looked around in the archives of:

http://dir.gmane.org/gmane.linux.drivers.video-input-infrastructure
http://www.spinics.net/lists/linux-media/

as mentioned in the welcome email of this list, but it isn't apparent to me what the status in Linux of using a device based on this chip is?

When inserting the USB dongle I get the following:

Dec  3 20:56:22 kultorvet kernel: usb 1-1: new high speed USB device using ehci_hcd and address 5
Dec  3 20:56:22 kultorvet kernel: usb 1-1: New USB device found, idVendor=1d19, idProduct=1102
Dec  3 20:56:22 kultorvet kernel: usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Dec  3 20:56:22 kultorvet kernel: usb 1-1: Product: Rtl2832UDVB
Dec  3 20:56:22 kultorvet kernel: usb 1-1: Manufacturer: Realtek
Dec  3 20:56:22 kultorvet kernel: usb 1-1: SerialNumber: 1
Dec  3 20:56:22 kultorvet kernel: usb 1-1: configuration #1 chosen from 1 choice

In Windows Vista it runs fine, showing TV using both MPEG2 and MPEG4 encoded signals, but I would much rather run it with Linux.

I am also developing software for a living, but not this close to hardware, however I would like to help out the way I can.

Thanks,
Peter

#1 lore raw
Quoted 2 lines · Peter Rasmussen

as mentioned in the welcome email of this list, but it isn't apparent to me what the status in Linux of using a device based on this chip is?

I have got today device having this chip (thanks to verkkokauppa.com for sponsoring) and I am going to implement the driver. I am in hope I can share some code from the old RTL2831U chip driver. I haven't looked driver code yet nor taken any sniffs. I will do that during next week.

Anyhow, there is Realtek released driver spreading over the net for that chip, you can use it.

Antti

Signature · 1 line
http://palosaari.fi/