Skip to contentSkip to conversation

2.6.32: scripts/kconfig/streamline_config.pl :Malfunction

DISCUSSION Patrick Ringl 3 participants 3 messages Dec 4, 2009 Kbuild

lore
Share & tools
lore
#0 lore raw

Hi,

I have encountered the following malfunction of the recently added streamline_config script. When running the following occurs:

ack:~/linux-2.6.32# scripts/kconfig/streamline_config.pl >config_strip
using config: '.config'
Use of uninitialized value $ksource in concatenation (.) or string at
scripts/kconfig/streamline_config.pl line 117.
dock config not found!!
module pata_sis did not have configs CONFIG_PATA_SIS

As a result: it couldnt map one currently loaded module properly and the other module had been properly mapped, but somehow the dependency/integrity check triggered it, since it wasnt enabled properly.

I checked the output of the script and yea as I assumed CONFIG_ACPI_DOCK is not set.

'dock' refers to:

ack:~/linux-2.6.32# modinfo dock
filename:       /lib/modules/2.6.26-2-amd64/kernel/drivers/acpi/dock.ko

and the belonging Kconfig file says:

config ACPI_DOCK
bool "Dock"
depends on EXPERIMENTAL
help
This driver supports ACPI-controlled docking stations and
removable
drive bays such as the IBM Ultrabay and the Dell Module Bay.

The same with 'pata_sis' (CONFIG_PATA_SIS is also not set) ..

ack:~/linux-2.6.32# modinfo pata_sis
filename:       /lib/modules/2.6.26-2-amd64/kernel/drivers/ata/pata_sis.ko

and the belonging Kconfig file:

config SATA_SIS
tristate "SiS 964/965/966/180 SATA support" depends on PCI
select PATA_SIS
help
This option enables support for SiS Serial ATA on SiS 964/965/966/180 and Parallel ATA on SiS 180. The PATA support for SiS 180 requires additionally to enable the PATA_SIS driver in the config. If unsure, say N.

In the end (if one ignored the two missing modules) a make silentoldconfig didnt even work.

What I did to reproduce this was using the standard kernel config of debian lenny's amd64 branch.

PS: I wrote such software myself, but I am going a totally different approach. Your idea is not that bad actually (I am enabling kernel config options and I am tracking all dependencies properly, while you can just ignore them, since your script only disables stuff).

regards,
Patrick

#1 lore raw
Quoted 6 lines · Patrick Ringl

Hi,

I have encountered the following malfunction of the recently added streamline_config script. When running the following occurs:

ack:~/linux-2.6.32# scripts/kconfig/streamline_config.pl >config_strip

Note, I usually use "make localmodconfig", I know you know that, but in case anyone else is using this as a reference.

Quoted 46 lines

using config: '.config'
Use of uninitialized value $ksource in concatenation (.) or string at scripts/kconfig/streamline_config.pl line 117.
dock config not found!!
module pata_sis did not have configs CONFIG_PATA_SIS

As a result: it couldnt map one currently loaded module properly and the other module had been properly mapped, but somehow the dependency/integrity check triggered it, since it wasnt enabled properly.

I checked the output of the script and yea as I assumed CONFIG_ACPI_DOCK is not set.

'dock' refers to:

ack:~/linux-2.6.32# modinfo dock
filename:       /lib/modules/2.6.26-2-amd64/kernel/drivers/acpi/dock.ko

and the belonging Kconfig file says:

config ACPI_DOCK
bool "Dock"
depends on EXPERIMENTAL
help
This driver supports ACPI-controlled docking stations and
removable
drive bays such as the IBM Ultrabay and the Dell Module Bay.

The same with 'pata_sis' (CONFIG_PATA_SIS is also not set) ..

ack:~/linux-2.6.32# modinfo pata_sis
filename:       /lib/modules/2.6.26-2-amd64/kernel/drivers/ata/pata_sis.ko

and the belonging Kconfig file:

config SATA_SIS
tristate "SiS 964/965/966/180 SATA support" depends on PCI
select PATA_SIS
help
This option enables support for SiS Serial ATA on SiS 964/965/966/180 and Parallel ATA on SiS 180. The PATA support for SiS 180 requires additionally to enable the PATA_SIS driver in the config. If unsure, say N.

Quoted 2 lines

In the end (if one ignored the two missing modules) a make silentoldconfig didnt even work.

How did it fail?

Quoted 3 lines

What I did to reproduce this was using the standard kernel config of debian lenny's amd64 branch.

I don't know where to find that config, could you email it to me, or post a url of it. Also send me your lsmod as well.

Quoted 6 lines

PS: I wrote such software myself, but I am going a totally different approach. Your idea is not that bad actually (I am enabling kernel config options and I am tracking all dependencies properly, while you can just ignore them, since your script only disables stuff).

Yeah, I toyed with doing the dependency game, but that got quite complex and fragile. I found the safest thing is to just turn off modules that you don't want. 99% of the time, that's good enough.

-- Steve

#2 lore raw

Hi,

Quoted 61 lines · Steven Rostedt
Quoted 7 lines · Patrick Ringl

Hi,

I have encountered the following malfunction of the recently added streamline_config script. When running the following occurs:

ack:~/linux-2.6.32# scripts/kconfig/streamline_config.pl >config_strip

Note, I usually use "make localmodconfig", I know you know that, but in case anyone else is using this as a reference.

Quoted 46 lines

using config: '.config'
Use of uninitialized value $ksource in concatenation (.) or string at scripts/kconfig/streamline_config.pl line 117.
dock config not found!!
module pata_sis did not have configs CONFIG_PATA_SIS

As a result: it couldnt map one currently loaded module properly and the other module had been properly mapped, but somehow the dependency/integrity check triggered it, since it wasnt enabled properly.

I checked the output of the script and yea as I assumed CONFIG_ACPI_DOCK is not set.

'dock' refers to:

ack:~/linux-2.6.32# modinfo dock
filename:       /lib/modules/2.6.26-2-amd64/kernel/drivers/acpi/dock.ko

and the belonging Kconfig file says:

config ACPI_DOCK
bool "Dock"
depends on EXPERIMENTAL
help
This driver supports ACPI-controlled docking stations and
removable
drive bays such as the IBM Ultrabay and the Dell Module Bay.

The same with 'pata_sis' (CONFIG_PATA_SIS is also not set) ..

ack:~/linux-2.6.32# modinfo pata_sis
filename:       /lib/modules/2.6.26-2-amd64/kernel/drivers/ata/pata_sis.ko

and the belonging Kconfig file:

config SATA_SIS
tristate "SiS 964/965/966/180 SATA support" depends on PCI
select PATA_SIS
help
This option enables support for SiS Serial ATA on SiS 964/965/966/180 and Parallel ATA on SiS 180. The PATA support for SiS 180 requires additionally to enable the PATA_SIS driver in the config. If unsure, say N.

Quoted 7 lines
Quoted 3 lines

In the end (if one ignored the two missing modules) a make silentoldconfig didnt even work.

How did it fail?

Well it started the configuration itself all over thus the first question that waited was:

Kernel compression mode

Quoted 1 line

1. Gzip (KERNEL_GZIP) (NEW)

2. Bzip2 (KERNEL_BZIP2) (NEW)
3. LZMA (KERNEL_LZMA) (NEW)
choice[1-3?]: ^Cmake[1]: *** [silentoldconfig] Interrupt

Quoted 8 lines
Quoted 3 lines

What I did to reproduce this was using the standard kernel config of debian lenny's amd64 branch.

I don't know where to find that config, could you email it to me, or post a url of it. Also send me your lsmod as well.

It is located in /boot/config-uname -r if you have Debian installed. Accessing it from the outside, you have to download the appropriate linux-image or rather the patch where Debian stores it's changed:

http://security.debian.org/debian-security/pool/updates/main/l/linux-2.6/linux-2.6_2.6.26-19lenny2.diff.gz

..But just for the record: I copied the kernelconfig to .config in the kernel source dir just to be sure ;-)

Quoted 6 lines
Quoted 5 lines

PS: I wrote such software myself, but I am going a totally different approach. Your idea is not that bad actually (I am enabling kernel config options and I am tracking all dependencies properly, while you can just ignore them, since your script only disables stuff).

Quoted 6 lines

Yeah, I toyed with doing the dependency game, but that got quite complex and fragile. I found the safest thing is to just turn off modules that you don't want. 99% of the time, that's good enough.

-- Steve

Heh, yea the dependency 'game' is quite wodge tho .. but there's other methods of fetching them than parsing the Kconfig files .. I didnt follow THIS approach after playing a lot with it ..

PS: lsmod is attached

Module                  Size  Used by
ext2                   66576  1 
ipmi_devintf           13200  2 
ipmi_si                43628  1 
ipmi_msghandler        38520  2 ipmi_devintf,ipmi_si
snd_pcsp               14588  0 
snd_pcm                81800  1 snd_pcsp
snd_timer              25744  1 snd_pcm
snd                    63688  3 snd_pcsp,snd_pcm,snd_timer
soundcore              12064  1 snd
snd_page_alloc         13072  1 snd_pcm
rng_core                8968  0 
i2c_i801               13596  0 
i2c_core               27936  1 i2c_i801
serio_raw               9988  0 
psmouse                42268  0 
shpchp                 34208  0 
pci_hotplug            32056  1 shpchp
i5000_edac             12936  0 
edac_core              49560  3 i5000_edac
evdev                  14208  0 
ext3                  125072  1 
jbd                    51240  1 ext3
mbcache                12804  2 ext2,ext3
raid1                  24192  2 
md_mod                 80292  3 raid1
usbhid                 45792  0 
hid                    41792  1 usbhid
ff_memless              9224  1 usbhid
ahci                   33036  6 
ehci_hcd               36108  0 
uhci_hcd               25760  0 
bnx2                   63496  0 
firmware_class         12544  1 bnx2
thermal_sys            17728  0 
tg3                    97156  0 
sd_mod                 29376  8 
sata_nv                28680  0 
sata_sis               10500  0 
pata_sis                7936  1 sata_sis
sata_via               13060  0 
ata_piix               22660  0 
libata                165600  6 ahci,sata_nv,sata_sis,pata_sis,sata_via,ata_piix
dock                   14112  1 libata
piix                   12424  0 [permanent]
ide_core              128284  1 piix
3w_xxxx                28064  0 
scsi_mod              161016  3 sd_mod,libata,3w_xxxx