Skip to contentSkip to conversation

Please help with NFS on Kubuntu Karmic 9.10

NFS Larry Alkoff 2 participants 6 messages Dec 5, 2009 – Dec 8, 2009

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

I am unable to connect with Kubuntu netbook remix Karmic 9.10.

I have seen many posts and articles on this issue.

The problem seems to be centered around the nfs version being used and I have placed the following 2 lines in /etc/fstab:

kata:/          /mnt/kata       nfs     defaults,noauto,nfsver=2  0 0
kata:/home      /mnt/kata/home  nfs     defaults,noauto,nfsver=2  0 0

kata is the netbook server which I am trying to mount on the client called arriba which runs on Kubuntu 8.04 LSB.

Most of the posts I have read say to add 'nfsver-2' to the fstab lines. However on both client and server, cat /proc/filesystems |grep nfs shows only:
nodev nfs
nodev nfs4 and
nodev nfsd.

It seems that this problem appears when people upgrade to (K)ubuntu 9.10 from an earlier version. In my case, this is a new netbook and I loaded the most recent version Kubuntu 9.10. Efforts to load Kubuntu 8.04 LTS which I use on my other machines failed - possibly because of the limited facilities on this small HP 110 Netbook.

This result happens on both server kata and client arriba. I don't know that the 'nodev' means.

I would like to add either nfs2 or nfs3 but have no idea how to specify this in apt-get or aptitude.

I'd also like to add that I have used Linux desktops and nfs for years (mostly on the command line) and believe it's setup correctly.

Please I am requesting troubleshooting advice.
It's getting really old to have to use a thumb drive to transfer files.

Larryalk

------------------------------------------------------------------------------
Join us December 9, 2009 for the Red Hat Virtual Experience, a free event focused on virtualization and cloud computing. Attend in-depth sessions from your desk. Your couch. Anywhere.
http://p.sf.net/sfu/redhat-sfdev2dev
_______________________________________________
NFS maillist - [email protected]
https://lists.sourceforge.net/lists/listinfo/nfs
_______________________________________________
Please note that [email protected] is being discontinued. Please subscribe to [email protected] instead.
http://vger.kernel.org/vger-lists.html#linux-nfs

#1 lore raw
Quoted 31 lines · Larry Alkoff

I am unable to connect with Kubuntu netbook remix Karmic 9.10.

I have seen many posts and articles on this issue.

The problem seems to be centered around the nfs version being used and I have placed the following 2 lines in /etc/fstab:

kata:/          /mnt/kata       nfs     defaults,noauto,nfsver=2  0 0
kata:/home      /mnt/kata/home  nfs     defaults,noauto,nfsver=2  0 0

kata is the netbook server which I am trying to mount on the client called arriba which runs on Kubuntu 8.04 LSB.

Most of the posts I have read say to add 'nfsver-2' to the fstab lines. However on both client and server, cat /proc/filesystems |grep nfs shows only:
nodev nfs
nodev nfs4 and
nodev nfsd.

It seems that this problem appears when people upgrade to (K)ubuntu 9.10 from an earlier version. In my case, this is a new netbook and I loaded the most recent version Kubuntu 9.10. Efforts to load Kubuntu 8.04 LTS which I use on my other machines failed - possibly because of the limited facilities on this small HP 110 Netbook.

This result happens on both server kata and client arriba. I don't know that the 'nodev' means.

I would like to add either nfs2 or nfs3 but have no idea how to specify this in apt-get or aptitude.

Quoted 10 lines

I'd also like to add that I have used Linux desktops and nfs for years (mostly on the command line) and believe it's setup correctly.

Please I am requesting troubleshooting advice.
It's getting really old to have to use a thumb drive to transfer files.

Larryalk

Just pointing out that you do not actually state what the problem is beyond "unable to connect". It might help if you described the symptoms a little further, ie, "I see mount error -13 on the console". For what it's worth, I think the "nodev" thing is a red herring; I see the same thing on my ubuntu server, and I can mount its exported filesystems just fine.

Rob Gardner

------------------------------------------------------------------------------
Join us December 9, 2009 for the Red Hat Virtual Experience, a free event focused on virtualization and cloud computing. Attend in-depth sessions from your desk. Your couch. Anywhere.
http://p.sf.net/sfu/redhat-sfdev2dev
_______________________________________________
NFS maillist - [email protected]
https://lists.sourceforge.net/lists/listinfo/nfs
_______________________________________________
Please note that [email protected] is being discontinued. Please subscribe to [email protected] instead.
http://vger.kernel.org/vger-lists.html#linux-nfs

#2 lore raw
Quoted 51 lines · Rob Gardner
Quoted 31 lines · Larry Alkoff

I am unable to connect with Kubuntu netbook remix Karmic 9.10.

I have seen many posts and articles on this issue.

The problem seems to be centered around the nfs version being used and I have placed the following 2 lines in /etc/fstab:

kata:/          /mnt/kata       nfs     defaults,noauto,nfsver=2  0 0
kata:/home      /mnt/kata/home  nfs     defaults,noauto,nfsver=2  0 0

kata is the netbook server which I am trying to mount on the client called arriba which runs on Kubuntu 8.04 LSB.

Most of the posts I have read say to add 'nfsver-2' to the fstab lines. However on both client and server, cat /proc/filesystems |grep nfs shows only:
nodev nfs
nodev nfs4 and
nodev nfsd.

It seems that this problem appears when people upgrade to (K)ubuntu 9.10 from an earlier version. In my case, this is a new netbook and I loaded the most recent version Kubuntu 9.10. Efforts to load Kubuntu 8.04 LTS which I use on my other machines failed - possibly because of the limited facilities on this small HP 110 Netbook.

This result happens on both server kata and client arriba. I don't know that the 'nodev' means.

I would like to add either nfs2 or nfs3 but have no idea how to specify this in apt-get or aptitude.

Quoted 10 lines

I'd also like to add that I have used Linux desktops and nfs for years (mostly on the command line) and believe it's setup correctly.

Please I am requesting troubleshooting advice.
It's getting really old to have to use a thumb drive to transfer files.

Larryalk

Just pointing out that you do not actually state what the problem is beyond "unable to connect". It might help if you described the symptoms a little further, ie, "I see mount error -13 on the console". For what it's worth, I think the "nodev" thing is a red herring; I see the same thing on my ubuntu server, and I can mount its exported filesystems just fine.

Quoted 3 lines

Rob Gardner

Hi Bob.

Here is what I have found so far.

I was able to mount kata / and /home about 1/2 hour ago. I used the mount to make a comparison between 2 files on kata.

However, the next thing I tried to do (an ls I think) the connection hung up. Every time I attempt to cd to the mount, konsole locks up and I have to quit the session.

In /var/log/syslog and messages I have repeated instances of:

Dec  5 15:58:50 arriba kernel: [164159.298317] nfs: server kata not 

responding, still trying

In /var/log/kern.log repeated instances of:

Dec  5 15:58:50 arriba kernel: [164159.298317] nfs: server kata not 

responding, still trying

I have a feeling that I have told nfs to use nfsver=2 and I don't actually have nfsver=2. However, I don't know how to find out what I do have except for what /proc/filesystems tells me. And I don't know how to load another version of the nfs system.

I've read a _lot_ of posts of Karmic users complaining that nfs won't run. Some have said it won't run unless you add nfsver=2 to the fstab line but it's not working for me. One person posted that he was able to change to nfsver=4 and I might try that since it's listed in /proc/filesystems but I thing nfs4 needs kerberos to run properly. I have zero experience with that.

It's kind of a big mess and I'm amazed that the Ubuntu people have not jumped on this since nfs is so crucial but I haven't heard a word.

I thought it would be a good idea to load Karmic on this netbook which would prepare me for all the UI changes that have been made until the LTS version coming in April but apparently not such a good decision. I have a big meeting Monday with the tax accountant and I don't dare to try and load something else coz I'll need the netbook. I'll probably just go to the meeting and turn over any files he wants on a thumb drive.

Here are a couple of urls on the problem:

http://ubuntuforums.org/showthread.php?p=8398721#post8398721
Man claims to have a working nfs but I don't understand what he's doing.
https://help.ubuntu.com/community/NFSv4Howto
Changing to nfs4 seems very complicated
http://ubuntuforums.org/showthread.php?t=1308241
Many peoples experiences on mounting nfs in nfs3
which isn't even on my list.

Thanks for trying to help,
Larryalk

------------------------------------------------------------------------------
Join us December 9, 2009 for the Red Hat Virtual Experience, a free event focused on virtualization and cloud computing. Attend in-depth sessions from your desk. Your couch. Anywhere.
http://p.sf.net/sfu/redhat-sfdev2dev
_______________________________________________
NFS maillist - [email protected]
https://lists.sourceforge.net/lists/listinfo/nfs
_______________________________________________
Please note that [email protected] is being discontinued. Please subscribe to [email protected] instead.
http://vger.kernel.org/vger-lists.html#linux-nfs

#3 lore raw
Quoted 54 lines · Larry Alkoff
Quoted 52 lines · Rob Gardner
Quoted 31 lines · Larry Alkoff

I am unable to connect with Kubuntu netbook remix Karmic 9.10.

I have seen many posts and articles on this issue.

The problem seems to be centered around the nfs version being used and I have placed the following 2 lines in /etc/fstab:

kata:/          /mnt/kata       nfs     defaults,noauto,nfsver=2  0 0
kata:/home      /mnt/kata/home  nfs     defaults,noauto,nfsver=2  0 0

kata is the netbook server which I am trying to mount on the client called arriba which runs on Kubuntu 8.04 LSB.

Most of the posts I have read say to add 'nfsver-2' to the fstab lines. However on both client and server, cat /proc/filesystems |grep nfs shows only:
nodev nfs
nodev nfs4 and
nodev nfsd.

It seems that this problem appears when people upgrade to (K)ubuntu 9.10 from an earlier version. In my case, this is a new netbook and I loaded the most recent version Kubuntu 9.10. Efforts to load Kubuntu 8.04 LTS which I use on my other machines failed - possibly because of the limited facilities on this small HP 110 Netbook.

This result happens on both server kata and client arriba. I don't know that the 'nodev' means.

I would like to add either nfs2 or nfs3 but have no idea how to specify this in apt-get or aptitude.

Quoted 11 lines

I'd also like to add that I have used Linux desktops and nfs for years (mostly on the command line) and believe it's setup correctly.

Please I am requesting troubleshooting advice.
It's getting really old to have to use a thumb drive to transfer files.

Larryalk

Just pointing out that you do not actually state what the problem is beyond "unable to connect". It might help if you described the symptoms a little further, ie, "I see mount error -13 on the console". For what it's worth, I think the "nodev" thing is a red herring; I see the same thing on my ubuntu server, and I can mount its exported filesystems just fine.

Quoted 7 lines
Quoted 4 lines

Rob Gardner

Hi Bob.

It's Rob.

Quoted 51 lines

Here is what I have found so far.

I was able to mount kata / and /home about 1/2 hour ago. I used the mount to make a comparison between 2 files on kata.

However, the next thing I tried to do (an ls I think) the connection hung up. Every time I attempt to cd to the mount, konsole locks up and I have to quit the session.

In /var/log/syslog and messages I have repeated instances of:

Dec  5 15:58:50 arriba kernel: [164159.298317] nfs: server kata not 

responding, still trying

In /var/log/kern.log repeated instances of:

Dec  5 15:58:50 arriba kernel: [164159.298317] nfs: server kata not 

responding, still trying

I have a feeling that I have told nfs to use nfsver=2 and I don't actually have nfsver=2. However, I don't know how to find out what I do have except for what /proc/filesystems tells me. And I don't know how to load another version of the nfs system.

I've read a _lot_ of posts of Karmic users complaining that nfs won't run. Some have said it won't run unless you add nfsver=2 to the fstab line but it's not working for me. One person posted that he was able to change to nfsver=4 and I might try that since it's listed in /proc/filesystems but I thing nfs4 needs kerberos to run properly. I have zero experience with that.

It's kind of a big mess and I'm amazed that the Ubuntu people have not jumped on this since nfs is so crucial but I haven't heard a word.

I thought it would be a good idea to load Karmic on this netbook which would prepare me for all the UI changes that have been made until the LTS version coming in April but apparently not such a good decision. I have a big meeting Monday with the tax accountant and I don't dare to try and load something else coz I'll need the netbook. I'll probably just go to the meeting and turn over any files he wants on a thumb drive.

Here are a couple of urls on the problem:

http://ubuntuforums.org/showthread.php?p=8398721#post8398721
Man claims to have a working nfs but I don't understand what he's doing.
https://help.ubuntu.com/community/NFSv4Howto
Changing to nfs4 seems very complicated
http://ubuntuforums.org/showthread.php?t=1308241
Many peoples experiences on mounting nfs in nfs3
which isn't even on my list.

Quoted 4 lines

Thanks for trying to help,
Larryalk

It's still not too clear what the problem is from those urls. Only the last one actually describes any problems, and some of them are mount problems. It sounds like your trouble can be boiled down to "nfs works for a while, then doesn't." The one situation in the last url that sounded like that turned out to be the server's ip address changing. Have you confirmed that this isn't happening in your situation?

Personally, I'm skeptical about the nfsver=2 suggestion. Versions 2 and 3 are in the same linux kernel module, so it would take some specific effort on the server to make nfsv3 fail while nfsv2 works ok.

Here's what I'd recommend to troubleshoot this further. First, when the connection "hangs", make sure the server's ip address is still valid. Can you ping the server? How about "rpcinfo -p"? It should show the usual services, ie, portmapper, nfs, mountd, etc. Could there be another server with the same ip address on the network? Or could it just be a generic network issue, ie, bad switch port? If all that looks ok, could it be a loss of access to the filesystem on the server? Log in to the server and check that the exported file systems are accessible. You can also enable debug output from nfs. On the client "echo 65535

Quoted 2 lines

/proc/sys/sunrpc/nfs_debug" and on the server "echo 65535 /proc/sys/sunrpc/nfsd_debug". Then try the connection again and look

for debug messages on the console or in /var/log/messages. There might be a hint about what the problem is. Post anything you feel is "interesting".

Rob Gardner

------------------------------------------------------------------------------
Join us December 9, 2009 for the Red Hat Virtual Experience, a free event focused on virtualization and cloud computing. Attend in-depth sessions from your desk. Your couch. Anywhere.
http://p.sf.net/sfu/redhat-sfdev2dev
_______________________________________________
NFS maillist - [email protected]
https://lists.sourceforge.net/lists/listinfo/nfs
_______________________________________________
Please note that [email protected] is being discontinued. Please subscribe to [email protected] instead.
http://vger.kernel.org/vger-lists.html#linux-nfs

#4 lore raw
Quoted 145 lines · Rob Gardner
Quoted 55 lines · Larry Alkoff
Quoted 53 lines · Rob Gardner
Quoted 33 lines · Larry Alkoff

I am unable to connect with Kubuntu netbook remix Karmic 9.10.

I have seen many posts and articles on this issue.

The problem seems to be centered around the nfs version being used and I have placed the following 2 lines in /etc/fstab:

kata:/          /mnt/kata       nfs     defaults,noauto,nfsver=2  0 0
kata:/home      /mnt/kata/home  nfs     defaults,noauto,nfsver=2  0 0

kata is the netbook server which I am trying to mount on the client called arriba which runs on Kubuntu 8.04 LSB.

Most of the posts I have read say to add 'nfsver-2' to the fstab lines. However on both client and server, cat /proc/filesystems |grep nfs shows only:
nodev nfs
nodev nfs4 and
nodev nfsd.

It seems that this problem appears when people upgrade to (K)ubuntu 9.10
from an earlier version. In my case, this is a new netbook and I loaded the most recent version Kubuntu 9.10. Efforts to load Kubuntu 8.04 LTS
which I use on my other machines failed - possibly because of the limited facilities on this small HP 110 Netbook.

This result happens on both server kata and client arriba. I don't know that the 'nodev' means.

I would like to add either nfs2 or nfs3 but have no idea how to specify this in apt-get or aptitude.

Quoted 10 lines

I'd also like to add that I have used Linux desktops and nfs for years (mostly on the command line) and believe it's setup correctly.

Please I am requesting troubleshooting advice.
It's getting really old to have to use a thumb drive to transfer files.

Larryalk

Just pointing out that you do not actually state what the problem is beyond "unable to connect". It might help if you described the symptoms a little further, ie, "I see mount error -13 on the console". For what it's worth, I think the "nodev" thing is a red herring; I see the same thing on my ubuntu server, and I can mount its exported filesystems just fine.

Quoted 7 lines
Quoted 4 lines

Rob Gardner

Hi Bob.

It's Rob.

Quoted 53 lines

Here is what I have found so far.

I was able to mount kata / and /home about 1/2 hour ago. I used the mount to make a comparison between 2 files on kata.

However, the next thing I tried to do (an ls I think) the connection hung up. Every time I attempt to cd to the mount, konsole locks up and I have to quit the session.

In /var/log/syslog and messages I have repeated instances of:

Dec  5 15:58:50 arriba kernel: [164159.298317] nfs: server kata not 

responding, still trying

In /var/log/kern.log repeated instances of:

Dec  5 15:58:50 arriba kernel: [164159.298317] nfs: server kata not 

responding, still trying

I have a feeling that I have told nfs to use nfsver=2 and I don't actually have nfsver=2. However, I don't know how to find out what I do have except for what /proc/filesystems tells me. And I don't know how to load another version of the nfs system.

I've read a _lot_ of posts of Karmic users complaining that nfs won't run. Some have said it won't run unless you add nfsver=2 to the fstab line but it's not working for me. One person posted that he was able to change to nfsver=4 and I might try that since it's listed in /proc/filesystems but I thing nfs4 needs kerberos to run properly. I have zero experience with that.

It's kind of a big mess and I'm amazed that the Ubuntu people have not jumped on this since nfs is so crucial but I haven't heard a word.

I thought it would be a good idea to load Karmic on this netbook which would prepare me for all the UI changes that have been made until the LTS version coming in April but apparently not such a good decision. I have a big meeting Monday with the tax accountant and I don't dare to try and load something else coz I'll need the netbook. I'll probably just go to the meeting and turn over any files he wants on a thumb drive.

Here are a couple of urls on the problem:

http://ubuntuforums.org/showthread.php?p=8398721#post8398721
Man claims to have a working nfs but I don't understand what he's
doing.
https://help.ubuntu.com/community/NFSv4Howto
Changing to nfs4 seems very complicated
http://ubuntuforums.org/showthread.php?t=1308241
Many peoples experiences on mounting nfs in nfs3
which isn't even on my list.

Quoted 4 lines

Thanks for trying to help,
Larryalk

It's still not too clear what the problem is from those urls. Only the last one actually describes any problems, and some of them are mount problems. It sounds like your trouble can be boiled down to "nfs works for a while, then doesn't." The one situation in the last url that sounded like that turned out to be the server's ip address changing. Have you confirmed that this isn't happening in your situation?

Personally, I'm skeptical about the nfsver=2 suggestion. Versions 2 and 3 are in the same linux kernel module, so it would take some specific effort on the server to make nfsv3 fail while nfsv2 works ok.

Here's what I'd recommend to troubleshoot this further. First, when the connection "hangs", make sure the server's ip address is still valid. Can you ping the server? How about "rpcinfo -p"? It should show the usual services, ie, portmapper, nfs, mountd, etc. Could there be another server with the same ip address on the network? Or could it just be a generic network issue, ie, bad switch port? If all that looks ok, could it be a loss of access to the filesystem on the server? Log in to the server and check that the exported file systems are accessible. You can also enable debug output from nfs. On the client "echo 65535

Quoted 9 lines
Quoted 2 lines

/proc/sys/sunrpc/nfs_debug" and on the server "echo 65535 /proc/sys/sunrpc/nfsd_debug". Then try the connection again and look

for debug messages on the console or in /var/log/messages. There might be a hint about what the problem is. Post anything you feel is "interesting".

Rob Gardner

Hello Rob.

Well I've had quite a ride but the problem is solved. Trouble is, I'm not really sure how.

While troubleshooting using your suggestions above, Karmic popped up and said there were some critical updates. They seemed to be most lib files but there was no indication what they did.

IAC, after that NFS started working properly so I'm going to ASSume that Canonical fixed the problems that so many users were complaining about upgrading from Jaunty to Karmic. In my case, I installed Karmic from scratch.

I even removed 'nfsver=3' from my entries in fstab and it's still rock solid.

Thanks very much for your help on this. I'm saving this email with your troubleshooting suggestions in case of need in the future - several of your tips were new to me.

Gratefully,
Larryalk

------------------------------------------------------------------------------
Return on Information:
Google Enterprise Search pays you back
Get the facts.
http://p.sf.net/sfu/google-dev2dev
_______________________________________________
NFS maillist - [email protected]
https://lists.sourceforge.net/lists/listinfo/nfs
_______________________________________________
Please note that [email protected] is being discontinued. Please subscribe to [email protected] instead.
http://vger.kernel.org/vger-lists.html#linux-nfs

#5 lore raw
Quoted 179 lines · Larry Alkoff
Quoted 149 lines · Rob Gardner
Quoted 58 lines · Larry Alkoff
Quoted 55 lines · Rob Gardner
Quoted 33 lines · Larry Alkoff

I am unable to connect with Kubuntu netbook remix Karmic 9.10.

I have seen many posts and articles on this issue.

The problem seems to be centered around the nfs version being used and I have placed the following 2 lines in /etc/fstab:

kata:/          /mnt/kata       nfs     defaults,noauto,nfsver=2  0 0
kata:/home      /mnt/kata/home  nfs     defaults,noauto,nfsver=2  0 0

kata is the netbook server which I am trying to mount on the client called arriba which runs on Kubuntu 8.04 LSB.

Most of the posts I have read say to add 'nfsver-2' to the fstab lines. However on both client and server, cat /proc/filesystems |grep nfs shows only:
nodev nfs
nodev nfs4 and
nodev nfsd.

It seems that this problem appears when people upgrade to (K)ubuntu 9.10
from an earlier version. In my case, this is a new netbook and I loaded the most recent version Kubuntu 9.10. Efforts to load Kubuntu 8.04 LTS
which I use on my other machines failed - possibly because of the limited facilities on this small HP 110 Netbook.

This result happens on both server kata and client arriba. I don't know that the 'nodev' means.

I would like to add either nfs2 or nfs3 but have no idea how to specify this in apt-get or aptitude.

Quoted 11 lines

I'd also like to add that I have used Linux desktops and nfs for years (mostly on the command line) and believe it's setup correctly.

Please I am requesting troubleshooting advice.
It's getting really old to have to use a thumb drive to transfer files.

Larryalk

Just pointing out that you do not actually state what the problem is beyond "unable to connect". It might help if you described the symptoms a little further, ie, "I see mount error -13 on the console". For what it's worth, I think the "nodev" thing is a red herring; I see the same thing on my ubuntu server, and I can mount its exported filesystems just fine.

Quoted 8 lines
Quoted 5 lines

Rob Gardner

Hi Bob.

It's Rob.

Quoted 53 lines

Here is what I have found so far.

I was able to mount kata / and /home about 1/2 hour ago. I used the mount to make a comparison between 2 files on kata.

However, the next thing I tried to do (an ls I think) the connection hung up. Every time I attempt to cd to the mount, konsole locks up and I have to quit the session.

In /var/log/syslog and messages I have repeated instances of:

Dec  5 15:58:50 arriba kernel: [164159.298317] nfs: server kata not 

responding, still trying

In /var/log/kern.log repeated instances of:

Dec  5 15:58:50 arriba kernel: [164159.298317] nfs: server kata not 

responding, still trying

I have a feeling that I have told nfs to use nfsver=2 and I don't actually have nfsver=2. However, I don't know how to find out what I do have except for what /proc/filesystems tells me. And I don't know how to load another version of the nfs system.

I've read a _lot_ of posts of Karmic users complaining that nfs won't run. Some have said it won't run unless you add nfsver=2 to the fstab line but it's not working for me. One person posted that he was able to change to nfsver=4 and I might try that since it's listed in /proc/filesystems but I thing nfs4 needs kerberos to run properly. I have zero experience with that.

It's kind of a big mess and I'm amazed that the Ubuntu people have not jumped on this since nfs is so crucial but I haven't heard a word.

I thought it would be a good idea to load Karmic on this netbook which would prepare me for all the UI changes that have been made until the LTS version coming in April but apparently not such a good decision. I have a big meeting Monday with the tax accountant and I don't dare to try and load something else coz I'll need the netbook. I'll probably just go to the meeting and turn over any files he wants on a thumb drive.

Here are a couple of urls on the problem:

http://ubuntuforums.org/showthread.php?p=8398721#post8398721
Man claims to have a working nfs but I don't understand what he's
doing.
https://help.ubuntu.com/community/NFSv4Howto
Changing to nfs4 seems very complicated
http://ubuntuforums.org/showthread.php?t=1308241
Many peoples experiences on mounting nfs in nfs3
which isn't even on my list.

Quoted 5 lines

Thanks for trying to help,
Larryalk

It's still not too clear what the problem is from those urls. Only the last one actually describes any problems, and some of them are mount problems. It sounds like your trouble can be boiled down to "nfs works for a while, then doesn't." The one situation in the last url that sounded like that turned out to be the server's ip address changing. Have you confirmed that this isn't happening in your situation?

Personally, I'm skeptical about the nfsver=2 suggestion. Versions 2 and 3 are in the same linux kernel module, so it would take some specific effort on the server to make nfsv3 fail while nfsv2 works ok.

Here's what I'd recommend to troubleshoot this further. First, when the connection "hangs", make sure the server's ip address is still valid. Can you ping the server? How about "rpcinfo -p"? It should show the usual services, ie, portmapper, nfs, mountd, etc. Could there be another server with the same ip address on the network? Or could it just be a generic network issue, ie, bad switch port? If all that looks ok, could it be a loss of access to the filesystem on the server? Log in to the server and check that the exported file systems are accessible. You can also enable debug output from nfs. On the client "echo 65535

Quoted 10 lines
Quoted 2 lines

/proc/sys/sunrpc/nfs_debug" and on the server "echo 65535 /proc/sys/sunrpc/nfsd_debug". Then try the connection again and look

for debug messages on the console or in /var/log/messages. There might be a hint about what the problem is. Post anything you feel is "interesting".

Rob Gardner

Hello Rob.

Well I've had quite a ride but the problem is solved. Trouble is, I'm not really sure how.

While troubleshooting using your suggestions above, Karmic popped up and said there were some critical updates. They seemed to be most lib files but there was no indication what they did.

IAC, after that NFS started working properly so I'm going to ASSume that Canonical fixed the problems that so many users were complaining about upgrading from Jaunty to Karmic. In my case, I installed Karmic from scratch.

I even removed 'nfsver=3' from my entries in fstab and it's still rock solid.

Quoted 7 lines

Thanks very much for your help on this. I'm saving this email with your troubleshooting suggestions in case of need in the future - several of your tips were new to me.

Gratefully,
Larryalk

Glad I was able to solve your problem. ;)

Rob Gardner

------------------------------------------------------------------------------
Return on Information:
Google Enterprise Search pays you back
Get the facts.
http://p.sf.net/sfu/google-dev2dev
_______________________________________________
NFS maillist - [email protected]
https://lists.sourceforge.net/lists/listinfo/nfs
_______________________________________________
Please note that [email protected] is being discontinued. Please subscribe to [email protected] instead.
http://vger.kernel.org/vger-lists.html#linux-nfs