Skip to contentSkip to conversation

WinTV HVR-900 USB (B3C0)

linux-dvb Rob Beard 5 participants 6 messages Dec 8, 2009 – Dec 9, 2009 Media (V4L/DVB)

lore
Share & tools
lore

Rob Beard

author
#0 lore raw

Hi folks,

I've borrowed a WinTV HVR-900 USB stick from a friend of mine to see if I can get any reception in my area before forking out for one however I've run in to a couple of problems and wondered if anyone had used one of these sticks?

The device appears to support both analogue and DVB-T (Freeview) TV however when I plug the device in it only appears to enable the analogue side of things (it comes up as /dev/video1 as I have a webcam on my laptop).

I've downloaded and installed the firmware in /lib/firmware as per the instructions on the LinuxDVB web site and it appears to pick it up and I've even tried compiling the v4l-dvb drivers too which didn't appear to make any difference.

Just to check it wasn't me going mad, I tried the dvb-utils scan utility and also Kaffene, both of which doesn't work (and I can't find a /dev/dvb directory either).

If it helps, the output from /var/log/messages is here: http://pastebin.com/m34f1048f

I just wondered if anyone else had one of these sticks actually working under Ubuntu 9.10? (I'm running kernel 2.6.31-16-generic-pae).

Rob

_______________________________________________
linux-dvb users mailing list
For V4L/DVB development, please use instead [email protected] [email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

#1 lore raw
Quoted 20 lines · Rob Beard

Hi folks,

I've borrowed a WinTV HVR-900 USB stick from a friend of mine to see if I can get any reception in my area before forking out for one however I've run in to a couple of problems and wondered if anyone had used one of these sticks?

The device appears to support both analogue and DVB-T (Freeview) TV however when I plug the device in it only appears to enable the analogue side of things (it comes up as /dev/video1 as I have a webcam on my laptop).

I've downloaded and installed the firmware in /lib/firmware as per the instructions on the LinuxDVB web site
and it appears to pick it up and I've even tried compiling the v4l-dvb drivers too which didn't appear to make any difference.

Just to check it wasn't me going mad, I tried the dvb-utils scan utility and also Kaffene, both of which doesn't work (and I can't find a /dev/dvb directory either).

Quoted 5 lines

If it helps, the output from /var/log/messages is here:
http://pastebin.com/m34f1048f

I just wondered if anyone else had one of these sticks actually working under Ubuntu 9.10?  (I'm running kernel 2.6.31-16-generic-pae).

The DVB-T portion of that particular board is unsupported (I have some code in the works but there are issues with the firmware redistribution rights).

Cheers,

Devin

Signature · 2 lines
Devin J. Heitmueller - Kernel Labs
http://www.kernellabs.com
#2 lore raw
In reply to Rob Beard
Quoted 7 lines · Rob Beard

Hi folks,

I've borrowed a WinTV HVR-900 USB stick from a friend of mine to see if I can get any reception in my area before forking out for one however I've run in to a couple of problems and wondered if anyone had used one of these sticks?

[snip]

Quoted 6 lines

I just wondered if anyone else had one of these sticks actually working under Ubuntu 9.10? (I'm running kernel 2.6.31-16-generic-pae).

Rob

Hi Rob,
this device uses empia chips.

I have a similar situation with Pinnacle Hybrid Pro 330e (yes, 3_3_0e) : the only driver that works (and was great at it) was Markus Rechberger's em28xx-new project. (my device has cx88 tuner IIRC). The em28xx-new project had some modifications to some tuner drivers too. They were based both on RE and documentation for which Markus had NDA's signed (a vague recollection of past googling).

The mainline kernel unfortunately does not support it out of the box, and it is not only about the firmware you have to download; There is something severely nonfunctional.

Why am I writing in past tense ?
This driver (em28xx-new) has recently been abandoned, and its author went proprietary. I was using a ubuntu package prepared by some ubuntu user, named gborzi. Unfortunately the package cannot apply to more recent kernels any more.
The last kernel it worked with, was 2.6.27-14 (Ubuntu terminology) and I'm stuck with it.

I have emailed Markus but he seems to have lost any interest in the em28xx-new... can't blame him though, he gave his reasons, some of them unfortunately true.

To v4l developers : as it is the case now that we can consider em28xx-new abandonware, could somebody see, what got devices like ours working in his driver, and push it to mainline, please ? Just the DVB support would be fine...

To Markus : the above is not a call to _steal_your_code_ but merely to somebody have a look and modify the mainline drivers so it could support A 5 YEAR OLD DEVICE like mine. People could employ a 'clean room' like in alternative to Broadcom (b43) development.

At least mine, is a 5 YEARS OLD design (bought in 2006).
On my computer, which was middle spec 5 years ago, I've always had problems with this device under Windows (XP) : 100% CPU on max frequency (1.6GHz) all the time, when playing. Under Linux, stock Ubuntu 8.10 Kaffeine, and em28xx-new, it is max 30% CPU at lowest freq (800MHz)).

Stock em28xx driver only supports analog (with no sound under stock tvtime, supposedly patched tvtime required).

el es

author
#3 lore raw
Quoted 48 lines · Lukasz Sokol
Quoted 8 lines · Rob Beard

Hi folks,

I've borrowed a WinTV HVR-900 USB stick from a friend of mine to see if I can get any reception in my area before forking out for one however I've run in to a couple of problems and wondered if anyone had used one of these sticks?

[snip]

Quoted 6 lines

I just wondered if anyone else had one of these sticks actually working under Ubuntu 9.10? (I'm running kernel 2.6.31-16-generic-pae).

Rob

Hi Rob,
this device uses empia chips.

I have a similar situation with Pinnacle Hybrid Pro 330e (yes, 3_3_0e) : the only driver that works (and was great at it) was Markus Rechberger's em28xx-new project. (my device has cx88 tuner IIRC). The em28xx-new project had some modifications to some tuner drivers too. They were based both on RE and documentation for which Markus had NDA's signed (a vague recollection of past googling).

The mainline kernel unfortunately does not support it out of the box, and it is not only about the firmware you have to download; There is something severely nonfunctional.

Why am I writing in past tense ?
This driver (em28xx-new) has recently been abandoned, and its author went proprietary. I was using a ubuntu package prepared by some ubuntu user, named gborzi. Unfortunately the package cannot apply to more recent kernels any more.
The last kernel it worked with, was 2.6.27-14 (Ubuntu terminology) and I'm stuck with it.

I have emailed Markus but he seems to have lost any interest in the em28xx-new... can't blame him though, he gave his reasons, some of them unfortunately true.

To v4l developers : as it is the case now that we can consider em28xx-new abandonware, could somebody see, what got devices like ours working in his driver, and push it to mainline, please ? Just the DVB support would be fine...

To Markus : the above is not a call to _steal_your_code_ but merely to somebody have a look and modify the mainline drivers so it could support A 5 YEAR OLD DEVICE like mine. People could employ a 'clean room' like in alternative to Broadcom (b43) development.

Quoted 9 lines

At least mine, is a 5 YEARS OLD design (bought in 2006).
On my computer, which was middle spec 5 years ago, I've always had problems with this device under Windows (XP) : 100% CPU on max frequency (1.6GHz) all the time, when playing. Under Linux, stock Ubuntu 8.10 Kaffeine, and em28xx-new, it is max 30% CPU at lowest freq (800MHz)).

Stock em28xx driver only supports analog (with no sound under stock tvtime, supposedly patched tvtime required).

el es

Thanks for the heads up, I think I'll have a look and see what else is available out there then, luckily I only borrowed it to test if it would work.

Regards,

Rob

#5 lore raw
In reply to Rob Beard

hi,

Quoted 19 lines · Rob Beard

From: Rob Beard <[email protected]>
Subject: Re: [linux-dvb] WinTV HVR-900 USB (B3C0)
To: "Lukasz Sokol" <[email protected]>
Cc: [email protected], [email protected]
Date: Wednesday, December 9, 2009, 10:34 AM

Quoted 5 lines · Lukasz Sokol

Rob Beard wrote:

Quoted 3 lines

Hi folks,

I've borrowed a WinTV HVR-900 USB stick from a

friend of mine to see if

Quoted 1 line
Quoted 1 line

I can get any reception in my area before forking

out for one however

Quoted 1 line
Quoted 1 line

I've run in to a couple of problems and wondered

if anyone had used one

Quoted 2 lines
Quoted 2 lines

of these sticks?

Quoted 9 lines
Quoted 4 lines
Quoted 1 line

[snip]

Quoted 1 line

I just wondered if anyone else had one of these

sticks actually working

Quoted 1 line
Quoted 1 line

under Ubuntu 9.10?  (I'm running kernel

2.6.31-16-generic-pae).

Quoted 2 lines
Quoted 2 lines

Rob

I've been using one (AxC0 I think) for years until the hardware died earlier this year. I think I bought it 2006, not quite sure when exactly. I think what killed it was that it was working permanently for 1,5years, so it probably overheated somwhen in the summer. But it was working fine with analog and dvb signal.

Quoted 8 lines
Quoted 7 lines
Quoted 2 lines

Hi Rob,
this device uses empia chips.

I have a similar situation with Pinnacle Hybrid Pro

330e (yes, 3_3_0e) : the only

Quoted 8 lines
Quoted 1 line

driver that works (and was great at it) was Markus

Rechberger's em28xx-new project.

Quoted 1 line

(my device has cx88 tuner IIRC). The em28xx-new

project had some modifications to

Quoted 1 line

some tuner drivers too. They were based both on RE and

documentation for which

Quoted 1 line

Markus had NDA's signed (a vague recollection of past

googling).

I've never used the in-kernel module rather the v4l-dvb one for this specific card. I even did not compiled it recently.

Quoted 48 lines
Quoted 2 lines

The mainline kernel unfortunately does not support it

out of the box, and it is not only

Quoted 1 line

about the firmware you have to download; There is

something severely nonfunctional.

Quoted 3 lines

Why am I writing in past tense ?
This driver (em28xx-new) has recently been abandoned,

and its author went proprietary.

Quoted 1 line

I was using a ubuntu package prepared by some ubuntu

user, named gborzi.

Quoted 1 line

Unfortunately the package cannot apply to more recent

kernels any more.

Quoted 1 line

The last kernel it worked with, was 2.6.27-14 (Ubuntu

terminology) and I'm stuck with it.

Quoted 2 lines

I have emailed Markus but he seems to have lost any

interest in the em28xx-new...

Quoted 1 line

can't blame him though, he gave his reasons, some of

them unfortunately true.

Quoted 2 lines

To v4l developers : as it is the case now that we can

consider em28xx-new abandonware,

Quoted 1 line

could somebody see, what got devices like ours working

in his driver, and push it to

Quoted 1 line

mainline, please ? Just the DVB support would be

fine...

Quoted 2 lines

To Markus : the above is not a call to

_steal_your_code_ but merely to somebody have

Quoted 1 line

a look and modify the mainline drivers so it could

support A 5 YEAR OLD DEVICE like mine.

Quoted 1 line

People could employ a 'clean room' like in alternative

to Broadcom (b43) development.

Quoted 2 lines

At least mine, is a 5 YEARS OLD design (bought in

2006).

Quoted 1 line

On my computer, which was middle spec 5 years ago,

I've always had problems with this device

Quoted 1 line

under Windows (XP) : 100% CPU on max frequency

(1.6GHz) all the time, when playing.

Quoted 1 line

Under Linux, stock Ubuntu 8.10 Kaffeine, and

em28xx-new, it is max 30% CPU at lowest freq (800MHz)).

Quoted 2 lines

Stock em28xx driver only supports analog (with no

sound under stock tvtime, supposedly patched tvtime required).

Quoted 1 line
Quoted 8 lines
Quoted 2 lines

el es

Thanks for the heads up, I think I'll have a look and see what else is
available out there then, luckily I only borrowed it to test if it would
work.

I'm using now terratec for about 30€. There were again problems with the drivers so I'm compiling again the v4l-dvb code. I don't see anything wrong to do it on your own.

regards