Initial support for OMAP3 Thunder board
Subsystems (6)
PATCH 1/1 Initial support for OMAP3 Thunder board
Dear All,
See attached patch for this board: http://www.technexion.com/index.php/thunder
The patch contains board file, support for an LCD panel under DSS2 and support for Alsa sound.
/Signed-off-by Daniel Toussaint <[email protected]>
///
arch/arm/mach-omap2/Kconfig +5 -0
@@ -151,6 +151,11 @@ config MACH_OMAP_4430SDP bool "OMAP 4430 SDP board" depends on ARCH_OMAP4 +config MACH_OMAP3_THUNDER + bool "Thunder OMAP3530 board" + depends on ARCH_OMAP3 && ARCH_OMAP34XX + select OMAP_PACKAGE_CUS + config OMAP3_EMU bool "OMAP3 debugging peripherals" depends on ARCH_OMAP3
arch/arm/mach-omap2/Makefile +3 -0
@@ -105,6 +105,9 @@ obj-$(CONFIG_MACH_OMAP_4430SDP) += board-4430sdp.o obj-$(CONFIG_MACH_OMAP3517EVM) += board-am3517evm.o +obj-$(CONFIG_MACH_OMAP3_THUNDER) += board-omap3thunder.o \ + mmc-twl4030.o + # Platform specific device init code obj-y += usb-musb.o obj-$(CONFIG_MACH_OMAP2_TUSB6010) += usb-tusb6010.o
arch/arm/mach-omap2/board-omap3thunder.c new file +647 -0
647 lines not on this page · raw message
drivers/video/omap2/displays/Kconfig +7 -0
@@ -25,4 +25,11 @@ config PANEL_TAAL help Taal DSI command mode panel from TPO. +config PANEL_LG_LB043WQ2 + tristate "LG LB043WQ2 Panel" + depends on OMAP2_DSS + help + LG LB043WQ2 Panel on Thunder board + + endmenu
drivers/video/omap2/displays/Makefile +2 -0
@@ -3,3 +3,5 @@ obj-$(CONFIG_PANEL_SAMSUNG_LTE430WQ_F0C) += panel-samsung-lte430wq-f0c.o obj-$(CONFIG_PANEL_SHARP_LS037V7DW01) += panel-sharp-ls037v7dw01.o obj-$(CONFIG_PANEL_TAAL) += panel-taal.o +obj-$(CONFIG_PANEL_LG_LB043WQ2) += panel-lg-lb043wq2.o +
drivers/video/omap2/displays/panel-lg-lb043wq2.c new file +118 -0
118 lines not on this page · raw message
sound/soc/omap/Kconfig +10 -0
@@ -116,3 +116,13 @@ config SND_OMAP_SOC_IGEP0020 select SND_SOC_TWL4030 help Say Y if you want to add support for Soc audio on IGEP v2 board. + +config SND_OMAP_SOC_OMAP3_THUNDER + tristate "SoC Audio support for OMAP3 Thunder" + depends on TWL4030_CORE && SND_OMAP_SOC && MACH_OMAP3_THUNDER + select SND_OMAP_SOC_MCBSP + select SND_SOC_TWL4030 + help + Say Y if you want to add support for SoC audio on the Thunder Board. + +
sound/soc/omap/Makefile +3 -0
@@ -18,6 +18,7 @@ snd-soc-omap3pandora-objs := omap3pandora.o snd-soc-omap3beagle-objs := omap3beagle.o snd-soc-zoom2-objs := zoom2.o snd-soc-igep0020-objs := igep0020.o +snd-soc-omap3thunder-objs := omap3thunder.o obj-$(CONFIG_SND_OMAP_SOC_N810) += snd-soc-n810.o obj-$(CONFIG_SND_OMAP_SOC_AMS_DELTA) += snd-soc-ams-delta.o
@@ -31,3 +32,5 @@ obj-$(CONFIG_SND_OMAP_SOC_OMAP3_PANDORA) += snd-soc-omap3pandora.o obj-$(CONFIG_SND_OMAP_SOC_OMAP3_BEAGLE) += snd-soc-omap3beagle.o obj-$(CONFIG_SND_OMAP_SOC_ZOOM2) += snd-soc-zoom2.o obj-$(CONFIG_SND_OMAP_SOC_IGEP0020) += snd-soc-igep0020.o +obj-$(CONFIG_SND_OMAP_SOC_OMAP3_THUNDER) += snd-soc-omap3thunder.o +
sound/soc/omap/omap3thunder.c new file +160 -0
160 lines not on this page · raw message
Tony Lindgren
maintainerQuoted 6 lines · Daniel Toussaint
Dear All,
See attached patch for this board:
http://www.technexion.com/index.php/thunder
The patch contains board file, support for an LCD panel under DSS2 and support for Alsa sound.
Cool. Can you please split the the patches into following separate patches:
1. Add minimal board support
2. Add defconfig
3. Add ASoC support
4. Add DSS2 support
Then please run all the patches through scripts/checkpatch.pl --strict and fix the errors and warnings.
And please make sure things keep compiling through the all the patches, otherwise git bisect will break.
Cheers,
Tony
Quoted 1,040 lines
/Signed-off-by Daniel Toussaint <[email protected]>
///
arch/arm/mach-omap2/Kconfig +5
-0@@ -151,6 +151,11 @@ config MACH_OMAP_4430SDP bool "OMAP 4430 SDP board" depends on ARCH_OMAP4 +config MACH_OMAP3_THUNDER + bool "Thunder OMAP3530 board" + depends on ARCH_OMAP3 && ARCH_OMAP34XX + select OMAP_PACKAGE_CUS + config OMAP3_EMU bool "OMAP3 debugging peripherals" depends on ARCH_OMAP3arch/arm/mach-omap2/Makefile +3
-0@@ -105,6 +105,9 @@ obj-$(CONFIG_MACH_OMAP_4430SDP) += board-4430sdp.o obj-$(CONFIG_MACH_OMAP3517EVM) += board-am3517evm.o +obj-$(CONFIG_MACH_OMAP3_THUNDER) += board-omap3thunder.o \ + mmc-twl4030.o + # Platform specific device init code obj-y += usb-musb.o obj-$(CONFIG_MACH_OMAP2_TUSB6010) += usb-tusb6010.oarch/arm/mach-omap2/board-omap3thunder.c new file +647
-0@@ -0,0 +1,647 @@ +/* +* linux/arch/arm/mach-omap2/board-omap3touchbook.c +* +* Copyright (C) 2009 Technexion +* +* Modified from mach-omap2/board-omap3beagleboard.c +* +* +* This program is free software; you can redistribute it and/or modify +* it under the terms of the GNU General Public License version 2 as +* published by the Free Software Foundation. +*/ + + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/delay.h> +#include <linux/err.h> +#include <linux/clk.h> +#include <linux/io.h> +#include <linux/leds.h> +#include <linux/gpio.h> +#include <linux/input.h> +#include <linux/gpio_keys.h> + +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/mtd/nand.h> + +#include <linux/regulator/machine.h> +#include <linux/i2c/twl4030.h> + +#include <mach/hardware.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/mach/flash.h> + +#include <plat/board.h> +#include <plat/usb.h> +#include <linux/usb/otg.h> +#include <plat/common.h> +#include <plat/gpmc.h> +#include <plat/nand.h> +#include <plat/mux.h> +#include <plat/display.h> + +#include "mmc-twl4030.h" +#include "mux.h" + + +#include <linux/spi/spi.h> +#include <linux/spi/ads7846.h> +#include <plat/mcspi.h> + +#include <plat/mmc.h> + + +#define OMAP3_THUNDER_TS_GPIO 136 + +#define GPMC_CS0_BASE 0x60 +#define GPMC_CS_SIZE 0x30 + +#define NAND_BLOCK_SIZE SZ_128K + +#define THUNDER_DVI_PANEL_EN_GPIO 199/* GPIO 7 on TWL4030 */ +#define THUNDER_LCD_PANEL_ENVDD 138 +#define THUNDER_LCD_PON 139 + +#define TWL_INTBR_GPBR1 0x0c +#define TWL_INTBR_PMBR1 0x0d +#define TWL_PWM0_ON 0x00 +#define TWL_PWM0_OFF 0x01 + +static int lcd_enabled; +static int dvi_enabled; + +static void __init thunder_display_init (void ) +{ +gpio_request (THUNDER_LCD_PANEL_ENVDD ,"lcd_panel_envdd" ); +gpio_request (THUNDER_LCD_PON ,"lcd_panel_pon" ); +gpio_direction_output (THUNDER_LCD_PON ,1 ); +gpio_direction_output (THUNDER_LCD_PANEL_ENVDD ,0 ); +return ; +} + +static int thunder_enable_lcd (struct omap_dss_device *dssdev) +{ + +if (dvi_enabled) { +printk (KERN_ERR "cannot enable LCD, DVI is enabled\n" ); +return -EINVAL ; + } + +gpio_set_value (THUNDER_LCD_PANEL_ENVDD ,0 ); +gpio_set_value (THUNDER_LCD_PON ,1 ); + +/* This turns on the backlight, move this to backlight code later */ +twl4030_i2c_write_u8 (TWL4030_MODULE_PWM0 ,0x81 ,TWL_PWM0_ON ); +twl4030_i2c_write_u8 (TWL4030_MODULE_INTBR ,0x04 ,TWL_INTBR_PMBR1 ); +twl4030_i2c_write_u8 (TWL4030_MODULE_PWM0 ,6 +40 ,TWL_PWM0_OFF ); +twl4030_i2c_write_u8 (TWL4030_MODULE_INTBR ,0x05 ,TWL_INTBR_GPBR1 ); +twl4030_i2c_write_u8 (TWL4030_MODULE_PWM0 ,6 +50 ,TWL_PWM0_OFF ); +/* End of turning on Backlight */ + + lcd_enabled =1 ; +return 0 ; +} + +static void thunder_disable_lcd (struct omap_dss_device *dssdev) +{ +gpio_set_value (THUNDER_LCD_PANEL_ENVDD ,1 ); +gpio_set_value (THUNDER_LCD_PON ,0 ); + lcd_enabled =0 ; +} + + +static int thunder_set_backlight (struct omap_dss_device *dssdev,int level) +{ +return 0 ; +} + +static int thunder_get_backlight (struct omap_dss_device *dssdev) +{ +return 10 ; +} + + +static struct omap_dss_device thunder_lcd_device = { + .type =OMAP_DISPLAY_TYPE_DPI , + .name ="lcd" , + .driver_name ="panel-lg-lb043wq2" , + .phy.dpi.data_lines =24 , + .platform_enable = thunder_enable_lcd, + .platform_disable = thunder_disable_lcd, + + .get_backlight = thunder_get_backlight, + .set_backlight = thunder_set_backlight, + .max_backlight_level =100 , +}; + +static int thunder_enable_dvi (struct omap_dss_device *dssdev) +{ +if (lcd_enabled) { +printk (KERN_ERR "cannot enable DVI, LCD is enabled\n" ); +return -EINVAL ; + } + +gpio_set_value (THUNDER_DVI_PANEL_EN_GPIO ,1 ); + dvi_enabled =1 ; + +return 0 ; +} + +static void thunder_disable_dvi (struct omap_dss_device *dssdev) +{ +gpio_set_value (THUNDER_DVI_PANEL_EN_GPIO ,0 ); + dvi_enabled =0 ; +} + +static struct omap_dss_device thunder_dvi_device = { + .type =OMAP_DISPLAY_TYPE_DPI , + .name ="dvi" , + .driver_name ="generic_panel" , + .phy.dpi.data_lines =24 , + .platform_enable = thunder_enable_dvi, + .platform_disable = thunder_disable_dvi, +}; + +static struct omap_dss_device *thunder_dss_devices[] = { + &thunder_lcd_device, + &thunder_dvi_device, +}; + +static struct omap_dss_board_info thunder_dss_data = { + .num_devices =ARRAY_SIZE (thunder_dss_devices), + .devices = thunder_dss_devices, + .default_device = &thunder_lcd_device, +}; + +static struct platform_device thunder_dss_device = { + .name ="omapdss" , + .id =-1 , + .dev = { + .platform_data = &thunder_dss_data, + }, +}; + +static struct regulator_consumer_supply thunder_vdds_dsi_supply = { + .supply ="vdds_dsi" , + .dev = &thunder_dss_device.dev, +}; + +static struct mtd_partition omap3thunder_nand_partitions[] = { +/* All the partition sizes are listed in terms of NAND block size */ + { + .name ="X-Loader" , + .offset =0 , + .size =4 *NAND_BLOCK_SIZE , + .mask_flags =MTD_WRITEABLE ,/* force read-only */ + }, + { + .name ="U-Boot" , + .offset =MTDPART_OFS_APPEND ,/* Offset = 0x80000 */ + .size =15 *NAND_BLOCK_SIZE , + .mask_flags =MTD_WRITEABLE ,/* force read-only */ + }, + { + .name ="U-Boot Env" , + .offset =MTDPART_OFS_APPEND ,/* Offset = 0x260000 */ + .size =1 *NAND_BLOCK_SIZE , + }, + { + .name ="Kernel" , + .offset =MTDPART_OFS_APPEND ,/* Offset = 0x280000 */ + .size =32 *NAND_BLOCK_SIZE , + }, + { + .name ="File System" , + .offset =MTDPART_OFS_APPEND ,/* Offset = 0x680000 */ + .size =MTDPART_SIZ_FULL , + }, +}; + +static struct omap_nand_platform_data omap3thunder_nand_data = { + .options =NAND_BUSWIDTH_16 , + .parts = omap3thunder_nand_partitions, + .nr_parts =ARRAY_SIZE (omap3thunder_nand_partitions), + .dma_channel =-1 ,/* disable DMA in OMAP NAND driver */ + .nand_setup =NULL , + .dev_ready =NULL , +}; + +static struct resource omap3thunder_nand_resource = { + .flags =IORESOURCE_MEM , +}; + +static struct platform_device omap3thunder_nand_device = { + .name ="omap2-nand" , + .id =-1 , + .dev = { + .platform_data = &omap3thunder_nand_data, + }, + .num_resources =1 , + .resource = &omap3thunder_nand_resource, +}; + +#include "sdram-micron-mt46h32m32lf-6.h" + +static struct omap_uart_config omap3_thunder_uart_config__initdata = { + .enabled_uarts = ((1 <<0 ) | (1 <<1 ) | (1 <<2 )), +}; + +static struct twl4030_usb_data thunder_usb_data = { + .usb_mode =T2_USB_MODE_ULPI , +}; + +static struct twl4030_hsmmc_info mmc[] = { + { + .mmc =1 , + .wires =8 , + .gpio_cd = -EINVAL , + .gpio_wp =29 , + }, + { + .mmc =2 , + .wires =4 , + .gpio_cd = -EINVAL , + .gpio_wp = -EINVAL , + + }, + {}/* Terminator */ +}; + +static struct regulator_consumer_supply thunder_vmmc1_supply = { + .supply ="vmmc" , +}; + +static struct regulator_consumer_supply thunder_vmmc2_supply = { + .supply ="vmmc" , +}; + + +static struct regulator_consumer_supply thunder_vsim_supply = { + .supply ="vmmc_aux" , +}; + +static struct gpio_led gpio_leds[] = { + { + .name ="thunderboard::usr0" , + .default_trigger ="heartbeat" , + .gpio = -EINVAL ,/* gets replaced */ + .active_low = true, + }, +}; + +static int thunder_twl_gpio_setup (struct device *dev, +unsigned gpio,unsigned ngpio) +{ +omap_mux_init_gpio (29 ,OMAP_PIN_INPUT ); + mmc[0 ].gpio_cd = gpio +0 ; +twl4030_mmc_init (mmc); + +/* link regulators to MMC adapters */ + thunder_vmmc1_supply.dev = mmc[0 ].dev; + thunder_vmmc2_supply.dev = mmc[1 ].dev; + thunder_vsim_supply.dev = mmc[0 ].dev; + +/* the LED marked LED 2 (LEDA) */ + gpio_leds[0 ].gpio = gpio +TWL4030_GPIO_MAX +1 ; + +/* gpio + 7 == DVI Enable */ +gpio_request (gpio +7 ,"EN_DVI" ); +gpio_direction_output (gpio +7 ,0 ); + +return 0 ; +} + +static struct twl4030_gpio_platform_data thunder_gpio_data = { + .gpio_base =OMAP_MAX_GPIO_LINES , + .irq_base =TWL4030_GPIO_IRQ_BASE , + .irq_end =TWL4030_GPIO_IRQ_END , + .use_leds = false, + .pullups =BIT (1 ), + .pulldowns =BIT (2 ) |BIT (6 ) |BIT (7 ) |BIT (8 ) |BIT (13 ) + |BIT (15 ) |BIT (16 ) |BIT (17 ), + .setup = thunder_twl_gpio_setup, +}; + + +/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */ +static struct regulator_init_data thunder_vmmc1 = { + .constraints = { + .min_uV =1850000 , + .max_uV =3150000 , + .valid_modes_mask =REGULATOR_MODE_NORMAL + |REGULATOR_MODE_STANDBY , + .valid_ops_mask =REGULATOR_CHANGE_VOLTAGE + |REGULATOR_CHANGE_MODE + |REGULATOR_CHANGE_STATUS , + }, + .num_consumer_supplies =1 , + .consumer_supplies = &thunder_vmmc1_supply, +}; + + +static struct regulator_init_data thunder_vmmc2 = { + .constraints = { + .min_uV =1850000 , + .max_uV =3150000 , + .apply_uV = true, + .valid_modes_mask =REGULATOR_MODE_NORMAL + |REGULATOR_MODE_STANDBY , + .valid_ops_mask =REGULATOR_CHANGE_MODE + |REGULATOR_CHANGE_STATUS , + }, + .num_consumer_supplies =1 , + .consumer_supplies = &thunder_vmmc2_supply, +}; + +/* VSIM for MMC1 pins DAT4..DAT7 (2 mA, plus card == max 50 mA) */ +static struct regulator_init_data thunder_vsim = { + .constraints = { + .min_uV =1800000 , + .max_uV =3000000 , + .valid_modes_mask =REGULATOR_MODE_NORMAL + |REGULATOR_MODE_STANDBY , + .valid_ops_mask =REGULATOR_CHANGE_VOLTAGE + |REGULATOR_CHANGE_MODE + |REGULATOR_CHANGE_STATUS , + }, + .num_consumer_supplies =1 , + .consumer_supplies = &thunder_vsim_supply, +}; + +static struct regulator_consumer_supply thunder_vdda_dac_supply = { + .supply ="vdda_dac" , + .dev = &thunder_dss_device.dev, +}; + + +/* VDAC for DSS driving S-Video (8 mA unloaded, max 65 mA) */ +static struct regulator_init_data thunder_vdac = { + .constraints = { + .min_uV =1800000 , + .max_uV =1800000 , + .apply_uV = true, + .valid_modes_mask =REGULATOR_MODE_NORMAL + |REGULATOR_MODE_STANDBY , + .valid_ops_mask =REGULATOR_CHANGE_MODE + |REGULATOR_CHANGE_STATUS , + }, + .num_consumer_supplies =1 , + .consumer_supplies = &thunder_vdda_dac_supply, +}; + +/* VPLL2 for digital video outputs */ +static struct regulator_init_data thunder_vpll2 = { + .constraints = { + .name ="VDVI" , + .min_uV =1800000 , + .max_uV =1800000 , + .valid_modes_mask =REGULATOR_MODE_NORMAL + |REGULATOR_MODE_STANDBY , + .valid_ops_mask =REGULATOR_CHANGE_MODE + |REGULATOR_CHANGE_STATUS , + }, + .num_consumer_supplies =1 , + .consumer_supplies = &thunder_vdds_dsi_supply, +}; + + + +static struct twl4030_platform_data thunder_twldata = { + .irq_base =TWL4030_IRQ_BASE , + .irq_end =TWL4030_IRQ_END , + +/* platform_data for children goes here */ + .usb = &thunder_usb_data, + .gpio = &thunder_gpio_data, + .vmmc1 = &thunder_vmmc1, + .vmmc2 = &thunder_vmmc2, + .vsim = &thunder_vsim, + .vdac = &thunder_vdac, + .vpll2 = &thunder_vpll2, +}; + +static struct i2c_board_info __initdata thunder_i2c_boardinfo[] = { + { +I2C_BOARD_INFO ("twl4030" ,0x48 ), + .flags =I2C_CLIENT_WAKE , + .irq =INT_34XX_SYS_NIRQ , + .platform_data = &thunder_twldata, + }, +}; + +static int __init omap3_thunder_i2c_init (void ) +{ +omap_register_i2c_bus (1 ,2600 , thunder_i2c_boardinfo,ARRAY_SIZE (thunder_i2c_boardinfo)); +omap_register_i2c_bus (2 ,100 ,NULL ,0 ); +omap_register_i2c_bus (3 ,100 ,NULL ,0 ); +return 0 ; +} + +static void __init omap3_thunder_init_irq (void ) +{ +omap2_init_common_hw (mt46h32m32lf6_sdrc_params, mt46h32m32lf6_sdrc_params); +omap_init_irq (); +omap_gpio_init (); +} + +static struct gpio_led_platform_data gpio_led_info = { + .leds = gpio_leds, + .num_leds =ARRAY_SIZE (gpio_leds), +}; + +static struct platform_device leds_gpio = { + .name ="leds-gpio" , + .id =-1 , + .dev = { + .platform_data = &gpio_led_info, + }, +}; + +static struct gpio_keys_button gpio_buttons[] = { + { + .code =BTN_EXTRA , + .gpio =7 , + .desc ="user" , + .wakeup =1 , + }, +}; + +static struct gpio_keys_platform_data gpio_key_info = { + .buttons = gpio_buttons, + .nbuttons =ARRAY_SIZE (gpio_buttons), +}; + +static struct platform_device keys_gpio = { + .name ="gpio-keys" , + .id =-1 , + .dev = { + .platform_data = &gpio_key_info, + }, +}; + +static void ads7846_dev_init (void ) +{ +if (gpio_request (OMAP3_THUNDER_TS_GPIO ,"ADS7846 pendown" ) <0 ) +printk (KERN_ERR "can't get ads7846 pen down GPIO\n" ); + +gpio_direction_input (OMAP3_THUNDER_TS_GPIO ); + +omap_set_gpio_debounce (OMAP3_THUNDER_TS_GPIO ,1 ); +omap_set_gpio_debounce_time (OMAP3_THUNDER_TS_GPIO ,0xa ); +} + +static int ads7846_get_pendown_state (void ) +{ +return !gpio_get_value (OMAP3_THUNDER_TS_GPIO ); +} + +struct ads7846_platform_data ads7846_config = { + .x_max =0x0fff , + .y_max =0x0fff , + .x_plate_ohms =180 , + .pressure_max =255 , + .debounce_max =10 , + .debounce_tol =3 , + .debounce_rep =1 , + .get_pendown_state = ads7846_get_pendown_state, + .keep_vref_on =1 , + .settle_delay_usecs =150 , +}; + + +static struct omap2_mcspi_device_config ads7846_mcspi_config = { + .turbo_mode =0 , + .single_channel =1 ,/* 0: slave, 1: master */ +}; + + +struct spi_board_info omap3thunder_spi_board_touch[] = { + { + .modalias ="ads7846" , + .bus_num =1 , + .chip_select =0 , + .max_speed_hz =1500000 , + .controller_data = &ads7846_mcspi_config, + .irq =OMAP_GPIO_IRQ (OMAP3_THUNDER_TS_GPIO ), + .platform_data = &ads7846_config, + }, +}; + + +/* G-sensor on SPI bus 4 */ +static struct spi_board_info omap3thunder_spi_board_info[] = { + { + .modalias ="spidev" , + .max_speed_hz =1500000 , + .bus_num =4 , + .chip_select =0 , + .mode =SPI_MODE_0 , + }, +}; + +static struct omap_board_config_kernel omap3_thunder_config[]__initdata = { +}; + +static struct platform_device *omap3_thunder_devices[]__initdata = { + &thunder_dss_device, + &leds_gpio, + &keys_gpio, +}; + +static void __init omap3thunder_flash_init (void ) +{ +u8 cs =0 ; +u8 nandcs =GPMC_CS_NUM +1 ; + +u32 gpmc_base_add =OMAP34XX_GPMC_VIRT ; + +/* find out the chip-select on which NAND exists */ +while (cs <GPMC_CS_NUM ) { +u32 ret =0 ; + ret =gpmc_cs_read_reg (cs,GPMC_CS_CONFIG1 ); + +if ((ret &0xC00 ) ==0x800 ) { +printk (KERN_INFO "Found NAND on CS%d\n" , cs); +if (nandcs >GPMC_CS_NUM ) + nandcs = cs; + } + cs++; + } + +if (nandcs >GPMC_CS_NUM ) { +printk (KERN_INFO "NAND: Unable to find configuration " +"in GPMC\n " ); +return ; + } + +if (nandcs <GPMC_CS_NUM ) { + omap3thunder_nand_data.cs = nandcs; + omap3thunder_nand_data.gpmc_cs_baseaddr = (void *) + (gpmc_base_add +GPMC_CS0_BASE + nandcs *GPMC_CS_SIZE ); + omap3thunder_nand_data.gpmc_baseaddr = (void *) (gpmc_base_add); + +printk (KERN_INFO "Registering NAND on CS%d\n" , nandcs); +if (platform_device_register (&omap3thunder_nand_device) <0 ) +printk (KERN_ERR "Unable to register NAND device\n" ); + } +} + + +static struct ehci_hcd_omap_platform_data ehci_pdata__initconst = { + .port_mode[0 ] =EHCI_HCD_OMAP_MODE_UNKNOWN , + .port_mode[1 ] =EHCI_HCD_OMAP_MODE_PHY , + .port_mode[2 ] =EHCI_HCD_OMAP_MODE_UNKNOWN , + + .phy_reset = false, + .reset_gpio_port[0 ] = -EINVAL , + .reset_gpio_port[1 ] =162 , + .reset_gpio_port[2 ] = -EINVAL +}; + +static void __init omap3_thunder_init (void ) +{ +omap3_thunder_i2c_init (); + +/* Turn on Wireless LAN */ +gpio_request (157 ,"WIFI ENABLE" ); +gpio_direction_output (157 ,0 ); + +platform_add_devices (omap3_thunder_devices, +ARRAY_SIZE (omap3_thunder_devices)); + omap_board_config = omap3_thunder_config; + omap_board_config_size =ARRAY_SIZE (omap3_thunder_config); +omap_serial_init (); + +usb_musb_init (); +usb_ehci_init (&ehci_pdata); +omap3thunder_flash_init (); + +ads7846_dev_init (); +spi_register_board_info (omap3thunder_spi_board_touch,ARRAY_SIZE (omap3thunder_spi_board_touch)); +spi_register_board_info (omap3thunder_spi_board_info,ARRAY_SIZE (omap3thunder_spi_board_info)); + +thunder_display_init (); +} + +static void __init omap3_thunder_map_io (void ) +{ +omap2_set_globals_343x (); +omap2_map_common_io (); +} + +MACHINE_START (OMAP3_THUNDER ,"OMAP3 Thunder Board" ) +/* Maintainer: Daniel Toussaint [email protected] */ + .phys_io = 0x48000000, + .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, + .boot_params = 0x80000100, + .map_io = omap3_thunder_map_io, + .init_irq = omap3_thunder_init_irq, + .init_machine = omap3_thunder_init, + .timer = &omap_timer, +MACHINE_END drivers/video/omap2/displays/Kconfig +7
-0@@ -25,4 +25,11 @@ config PANEL_TAAL help Taal DSI command mode panel from TPO. +config PANEL_LG_LB043WQ2 + tristate "LG LB043WQ2 Panel" + depends on OMAP2_DSS + help + LG LB043WQ2 Panel on Thunder board + + endmenudrivers/video/omap2/displays/Makefile +2
-0@@ -3,3 +3,5 @@ obj-$(CONFIG_PANEL_SAMSUNG_LTE430WQ_F0C) += panel-samsung-lte430wq-f0c.o obj-$(CONFIG_PANEL_SHARP_LS037V7DW01) += panel-sharp-ls037v7dw01.o obj-$(CONFIG_PANEL_TAAL) += panel-taal.o +obj-$(CONFIG_PANEL_LG_LB043WQ2) += panel-lg-lb043wq2.o +drivers/video/omap2/displays/panel-lg-lb043wq2.c new file +118
-0@@ -0,0 +1,118 @@ +/* +* LCD panel driver for LG LB043WQ2 panel +* +* Daniel Toussaint <[email protected]> +* +* Modified from Sharp LS037V7DW01 +* This program is free software; you can redistribute it and/or modify it +* under the terms of the GNU General Public License version 2 as published by +* the Free Software Foundation. +* +* This program is distributed in the hope that it will be useful, but WITHOUT +* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or +* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for +* more details. +* +* You should have received a copy of the GNU General Public License along with +* this program. If not, see <http://www.gnu.org/licenses/>. +*/ + + + +#include <linux/module.h> +#include <linux/delay.h> + +#include <plat/display.h> + +static struct omap_video_timings lg_lb043wq2_timings = { + .x_res =480 , + .y_res =272 , + + .hsw =41 , + .hfp =8 , + .hbp =45 -41 , + + .vsw =10 , + .vfp =4 , + .vbp =12 -10 , + + + .pixel_clock =8000 , + +}; + +static int lg_lb043wq2_panel_probe (struct omap_dss_device *dssdev) +{ + dssdev->panel.config =OMAP_DSS_LCD_TFT |OMAP_DSS_LCD_IVS | +OMAP_DSS_LCD_IHS ; + dssdev->panel.timings = lg_lb043wq2_timings; + +return 0 ; +} + +static void lg_lb043wq2_panel_remove (struct omap_dss_device *dssdev) +{ +} + +static int lg_lb043wq2_panel_enable (struct omap_dss_device *dssdev) +{ +int r =0 ; + +/* wait couple of vsyncs until enabling the LCD */ +msleep (50 ); + +if (dssdev->platform_enable) + r = dssdev->platform_enable (dssdev); + +return r; +} + +static void lg_lb043wq2_panel_disable (struct omap_dss_device *dssdev) +{ +if (dssdev->platform_disable) + dssdev->platform_disable (dssdev); + +/* wait at least 5 vsyncs after disabling the LCD */ + +msleep (100 ); +} + +static int lg_lb043wq2_panel_suspend (struct omap_dss_device *dssdev) +{ +lg_lb043wq2_panel_disable (dssdev); +return 0 ; +} + +static int lg_lb043wq2_panel_resume (struct omap_dss_device *dssdev) +{ +return lg_lb043wq2_panel_enable (dssdev); +} + +static struct omap_dss_driver lg_lb043wq2_driver = { + .probe = lg_lb043wq2_panel_probe, + .remove = lg_lb043wq2_panel_remove, + + .enable = lg_lb043wq2_panel_enable, + .disable = lg_lb043wq2_panel_disable, + .suspend = lg_lb043wq2_panel_suspend, + .resume = lg_lb043wq2_panel_resume, + + .driver = { + .name ="panel-lg-lb043wq2" , + .owner =THIS_MODULE , + }, +}; + +static int __init lg_lb043wq2_panel_drv_init (void ) +{ +return omap_dss_register_driver (&lg_lb043wq2_driver); +} + +static void __exit lg_lb043wq2_panel_drv_exit(void) +{ +omap_dss_unregister_driver (&lg_lb043wq2_driver); +} + +module_init (lg_lb043wq2_panel_drv_init); +module_exit (lg_lb043wq2_panel_drv_exit); +MODULE_LICENSE ("GPL" );sound/soc/omap/Kconfig +10
-0@@ -116,3 +116,13 @@ config SND_OMAP_SOC_IGEP0020 select SND_SOC_TWL4030 help Say Y if you want to add support for Soc audio on IGEP v2 board. + +config SND_OMAP_SOC_OMAP3_THUNDER + tristate "SoC Audio support for OMAP3 Thunder" + depends on TWL4030_CORE && SND_OMAP_SOC && MACH_OMAP3_THUNDER + select SND_OMAP_SOC_MCBSP + select SND_SOC_TWL4030 + help + Say Y if you want to add support for SoC audio on the Thunder Board. + +sound/soc/omap/Makefile +3
-0@@ -18,6 +18,7 @@ snd-soc-omap3pandora-objs := omap3pandora.o snd-soc-omap3beagle-objs := omap3beagle.o snd-soc-zoom2-objs := zoom2.o snd-soc-igep0020-objs := igep0020.o +snd-soc-omap3thunder-objs := omap3thunder.o obj-$(CONFIG_SND_OMAP_SOC_N810) += snd-soc-n810.o obj-$(CONFIG_SND_OMAP_SOC_AMS_DELTA) += snd-soc-ams-delta.o@@ -31,3 +32,5 @@ obj-$(CONFIG_SND_OMAP_SOC_OMAP3_PANDORA) += snd-soc-omap3pandora.o obj-$(CONFIG_SND_OMAP_SOC_OMAP3_BEAGLE) += snd-soc-omap3beagle.o obj-$(CONFIG_SND_OMAP_SOC_ZOOM2) += snd-soc-zoom2.o obj-$(CONFIG_SND_OMAP_SOC_IGEP0020) += snd-soc-igep0020.o +obj-$(CONFIG_SND_OMAP_SOC_OMAP3_THUNDER) += snd-soc-omap3thunder.o +sound/soc/omap/omap3thunder.c new file +160
-0@@ -0,0 +1,160 @@ +/* +* omap3 audio support for Technexion Thunder boards. +* Modified from omap3beagle.c +* Daniel Toussaint <[email protected]> +* +* This program is free software; you can redistribute it and/or +* modify it under the terms of the GNU General Public License +* version 2 as published by the Free Software Foundation. +* +* This program is distributed in the hope that it will be useful, but +* WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +* General Public License for more details. +* +* You should have received a copy of the GNU General Public License +* along with this program; if not, write to the Free Software +* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA +* 02110-1301 USA +* +*/ + + +#include <linux/clk.h> +#include <linux/platform_device.h> +#include <sound/core.h> +#include <sound/pcm.h> +#include <sound/soc.h> +#include <sound/soc-dapm.h> + +#include <asm/mach-types.h> +#include <plat/hardware.h> +#include <plat/gpio.h> +#include <plat/mcbsp.h> + +#include "omap-mcbsp.h" +#include "omap-pcm.h" +#include "../codecs/twl4030.h" + +static int omap3thunder_hw_params (struct snd_pcm_substream *substream, +struct snd_pcm_hw_params *params) +{ +struct snd_soc_pcm_runtime *rtd = substream->private_data; +struct snd_soc_dai *codec_dai = rtd->dai->codec_dai; +struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai; +unsigned int fmt; +int ret; + +switch (params_channels (params)) { +case 2 :/* Stereo I2S mode */ + fmt =SND_SOC_DAIFMT_I2S | +SND_SOC_DAIFMT_NB_NF | +SND_SOC_DAIFMT_CBM_CFM ; +break ; +case 4 :/* Four channel TDM mode */ + fmt =SND_SOC_DAIFMT_DSP_A | +SND_SOC_DAIFMT_IB_NF | +SND_SOC_DAIFMT_CBM_CFM ; +break ; +default : +return -EINVAL ; + } + +/* Set codec DAI configuration */ + ret =snd_soc_dai_set_fmt (codec_dai, fmt); +if (ret <0 ) { +printk (KERN_ERR "can't set codec DAI configuration\n" ); +return ret; + } + +/* Set cpu DAI configuration */ + ret =snd_soc_dai_set_fmt (cpu_dai, fmt); +if (ret <0 ) { +printk (KERN_ERR "can't set cpu DAI configuration\n" ); +return ret; + } + +/* Set the codec system clock for DAC and ADC */ + ret =snd_soc_dai_set_sysclk (codec_dai,0 ,26000000 , +SND_SOC_CLOCK_IN ); +if (ret <0 ) { +printk (KERN_ERR "can't set codec system clock\n" ); +return ret; + } + +return 0 ; +} + +static struct snd_soc_ops omap3thunder_ops = { + .hw_params = omap3thunder_hw_params, +}; + +/* Digital audio interface glue - connects codec <--> CPU */ +static struct snd_soc_dai_link omap3thunder_dai = { + .name ="TWL4030" , + .stream_name ="TWL4030" , + .cpu_dai = &omap_mcbsp_dai[0 ], + .codec_dai = &twl4030_dai[TWL4030_DAI_HIFI ], + .ops = &omap3thunder_ops, +}; + +/* Audio machine driver */ +static struct snd_soc_card snd_soc_omap3thunder = { + .name ="omap3thunder" , + .platform = &omap_soc_platform, + .dai_link = &omap3thunder_dai, + .num_links =1 , +}; + +/* Audio subsystem */ +static struct snd_soc_device omap3thunder_snd_devdata = { + .card = &snd_soc_omap3thunder, + .codec_dev = &soc_codec_dev_twl4030, +}; + +static struct platform_device *omap3thunder_snd_device; + +static int __init omap3thunder_soc_init (void ) +{ +int ret; + +if (!machine_is_omap3_thunder ()) { +pr_debug ("Not OMAP3 thunder!\n" ); +return -ENODEV ; + } +pr_info ("OMAP3 thunder SoC init\n" ); + + omap3thunder_snd_device =platform_device_alloc ("soc-audio" ,-1 ); +if (!omap3thunder_snd_device) { +printk (KERN_ERR "Platform device allocation failed\n" ); +return -ENOMEM ; + } + +platform_set_drvdata (omap3thunder_snd_device, &omap3thunder_snd_devdata); + omap3thunder_snd_devdata.dev = &omap3thunder_snd_device->dev; + *(unsigned int *)omap3thunder_dai.cpu_dai->private_data =1 ;/* McBSP2 */ + + ret =platform_device_add (omap3thunder_snd_device); +if (ret) + goto err1; + +return 0 ; + +err1: +printk (KERN_ERR "Unable to add platform device\n" ); +platform_device_put (omap3thunder_snd_device); + +return ret; +} + +static void __exit omap3thunder_soc_exit(void) +{ +platform_device_unregister (omap3thunder_snd_device); +} + +module_init (omap3thunder_soc_init); +module_exit (omap3thunder_soc_exit); + +MODULE_AUTHOR ("Steve Sakoman <[email protected]>" ); +MODULE_DESCRIPTION ("ALSA SoC OMAP3 thunder" ); +MODULE_LICENSE ("GPL" );
Quoted 13 lines · ext Tony Lindgren
Quoted 4 lines
See attached patch for this board:
http://www.technexion.com/index.php/thunder
The patch contains board file, support for an LCD panel under DSS2 and support for Alsa sound.Cool. Can you please split the the patches into following separate patches:
1. Add minimal board support
2. Add defconfig
3. Add ASoC support
4. Add DSS2 support
Quoted 5 lines
Then please run all the patches through
scripts/checkpatch.pl--strict and fix the errors and warnings.And please make sure things keep compiling through the all the patches, otherwise git bisect will break.
if possible, please run sparse as well.
Signature · 1 line
balbi
Quoted 8 lines
Cool. Can you please split the the patches into following separate patches:
1. Add minimal board support
2. Add defconfig
3. Add ASoC support
4. Add DSS2 support
Ok, so can the DSS2 related stuff be ifdef-ed in the board file ,or does it have to be completely seperated ?
Thanks
Quoted 1,043 lines
Then please run all the patches through
scripts/checkpatch.pl--strict and fix the errors and warnings.And please make sure things keep compiling through the all the patches, otherwise git bisect will break.
Cheers,
Tony
Quoted 1,032 lines
/Signed-off-by Daniel Toussaint <[email protected]>
///
arch/arm/mach-omap2/Kconfig +0
-0@@ -151,6 +151,11 @@ config MACH_OMAP_4430SDPbool "OMAP 4430 SDP board"
depends onARCH_OMAP4arch/arm/mach-omap2/Kconfig +5
-0+config MACH_OMAP3_THUNDER + bool "Thunder OMAP3530 board" + depends on ARCH_OMAP3 && ARCH_OMAP34XX + select OMAP_PACKAGE_CUS +config
OMAP3_EMU
bool "OMAP3 debugging peripherals"
depends onARCH_OMAP3arch/arm/mach-omap2/Makefile +0
-0@@ -105,6 +105,9 @@ obj-$(CONFIG_MACH_OMAP_4430SDP) += board-4430sdp.oobj-$(CONFIG_MACH_OMAP3517EVM) += board-am3517evm.o
arch/arm/mach-omap2/Makefile +3
-0+obj-$(CONFIG_MACH_OMAP3_THUNDER) += board-omap3thunder.o \ + mmc-twl4030.o +# Platform specific device init code
obj-y += usb-musb.o obj-$(CONFIG_MACH_OMAP2_TUSB6010) += usb-tusb6010.oarch/arm/mach-omap2/board-omap3thunder.c new file +647
-0@@ -0,0 +1,647 @@ +/* +* linux/arch/arm/mach-omap2/board-omap3touchbook.c +* +* Copyright (C) 2009 Technexion +* +* Modified from mach-omap2/board-omap3beagleboard.c +* +* +* This program is free software; you can redistribute it and/or modify +* it under the terms of the GNU General Public License version 2 as +* published by the Free Software Foundation. +*/ + + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/delay.h> +#include <linux/err.h> +#include <linux/clk.h> +#include <linux/io.h> +#include <linux/leds.h> +#include <linux/gpio.h> +#include <linux/input.h> +#include <linux/gpio_keys.h> + +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/mtd/nand.h> + +#include <linux/regulator/machine.h> +#include <linux/i2c/twl4030.h> + +#include <mach/hardware.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/mach/flash.h> + +#include <plat/board.h> +#include <plat/usb.h> +#include <linux/usb/otg.h> +#include <plat/common.h> +#include <plat/gpmc.h> +#include <plat/nand.h> +#include <plat/mux.h> +#include <plat/display.h> + +#include "mmc-twl4030.h" +#include "mux.h" + + +#include <linux/spi/spi.h> +#include <linux/spi/ads7846.h> +#include <plat/mcspi.h> + +#include <plat/mmc.h> + + +#define OMAP3_THUNDER_TS_GPIO 136 + +#define GPMC_CS0_BASE 0x60 +#define GPMC_CS_SIZE 0x30 + +#define NAND_BLOCK_SIZE SZ_128K + +#define THUNDER_DVI_PANEL_EN_GPIO 199/* GPIO 7 on TWL4030 */ +#define THUNDER_LCD_PANEL_ENVDD 138 +#define THUNDER_LCD_PON 139 + +#define TWL_INTBR_GPBR1 0x0c +#define TWL_INTBR_PMBR1 0x0d +#define TWL_PWM0_ON 0x00 +#define TWL_PWM0_OFF 0x01 + +static int lcd_enabled; +static int dvi_enabled; + +static void __init thunder_display_init (void ) +{ + gpio_request(THUNDER_LCD_PANEL_ENVDD, "lcd_panel_envdd"); + gpio_request(THUNDER_LCD_PON, "lcd_panel_pon"); + gpio_direction_output(THUNDER_LCD_PON, 1); + gpio_direction_output(THUNDER_LCD_PANEL_ENVDD, 0); + return; +} + +static int thunder_enable_lcd (struct omap_dss_device *dssdev) +{ + + if (dvi_enabled) { + printk(KERN_ERR "cannot enable LCD, DVI is enabled\n"); + return -EINVAL; + } + + gpio_set_value(THUNDER_LCD_PANEL_ENVDD, 0); + gpio_set_value(THUNDER_LCD_PON, 1); + + /* This turns on the backlight, move this to backlight code later */ + twl4030_i2c_write_u8(TWL4030_MODULE_PWM0, 0x81, TWL_PWM0_ON); + twl4030_i2c_write_u8(TWL4030_MODULE_INTBR, 0x04, TWL_INTBR_PMBR1); + twl4030_i2c_write_u8(TWL4030_MODULE_PWM0, 6 + 40 , TWL_PWM0_OFF); + twl4030_i2c_write_u8(TWL4030_MODULE_INTBR, 0x05, TWL_INTBR_GPBR1); + twl4030_i2c_write_u8(TWL4030_MODULE_PWM0, 6 + 50 , TWL_PWM0_OFF); + /* End of turning on Backlight */ + + lcd_enabled = 1; + return 0; +} + +static void thunder_disable_lcd (struct omap_dss_device *dssdev) +{ + gpio_set_value(THUNDER_LCD_PANEL_ENVDD, 1); + gpio_set_value(THUNDER_LCD_PON, 0); + lcd_enabled = 0; +} + + +static int thunder_set_backlight (struct omap_dss_device *dssdev,int level) +{ + return 0; +} + +static int thunder_get_backlight (struct omap_dss_device *dssdev) +{ + return 10; +} + + +static struct omap_dss_device thunder_lcd_device = { + .type = OMAP_DISPLAY_TYPE_DPI, + .name = "lcd", + .driver_name = "panel-lg-lb043wq2", + .phy.dpi.data_lines = 24, + .platform_enable = thunder_enable_lcd, + .platform_disable = thunder_disable_lcd, + + .get_backlight = thunder_get_backlight, + .set_backlight = thunder_set_backlight, + .max_backlight_level = 100, +}; + +static int thunder_enable_dvi (struct omap_dss_device *dssdev) +{ + if (lcd_enabled) { + printk(KERN_ERR "cannot enable DVI, LCD is enabled\n"); + return -EINVAL; + } + + gpio_set_value(THUNDER_DVI_PANEL_EN_GPIO, 1); + dvi_enabled = 1; + + return 0; +} + +static void thunder_disable_dvi (struct omap_dss_device *dssdev) +{ + gpio_set_value(THUNDER_DVI_PANEL_EN_GPIO, 0); + dvi_enabled = 0; +} + +static struct omap_dss_device thunder_dvi_device = { + .type = OMAP_DISPLAY_TYPE_DPI, + .name = "dvi", + .driver_name = "generic_panel", + .phy.dpi.data_lines = 24, + .platform_enable = thunder_enable_dvi, + .platform_disable = thunder_disable_dvi, +}; + +static struct omap_dss_device *thunder_dss_devices[] = { + &thunder_lcd_device, + &thunder_dvi_device, +}; + +static struct omap_dss_board_info thunder_dss_data = { + .num_devices = ARRAY_SIZE(thunder_dss_devices), + .devices = thunder_dss_devices, + .default_device = &thunder_lcd_device, +}; + +static struct platform_device thunder_dss_device = { + .name = "omapdss", + .id = -1, + .dev = { + .platform_data = &thunder_dss_data, + }, +}; + +static struct regulator_consumer_supply thunder_vdds_dsi_supply = { + .supply = "vdds_dsi", + .dev = &thunder_dss_device.dev, +}; + +static struct mtd_partition omap3thunder_nand_partitions[] = { + /* All the partition sizes are listed in terms of NAND block size */ + { + .name = "X-Loader", + .offset = 0, + .size = 4 * NAND_BLOCK_SIZE, + .mask_flags = MTD_WRITEABLE, /* force read-only */ + }, + { + .name = "U-Boot", + .offset = MTDPART_OFS_APPEND, /* Offset = 0x80000 */ + .size = 15 * NAND_BLOCK_SIZE, + .mask_flags = MTD_WRITEABLE, /* force read-only */ + }, + { + .name = "U-Boot Env", + .offset = MTDPART_OFS_APPEND, /* Offset = 0x260000 */ + .size = 1 * NAND_BLOCK_SIZE, + }, + { + .name = "Kernel", + .offset = MTDPART_OFS_APPEND, /* Offset = 0x280000 */ + .size = 32 * NAND_BLOCK_SIZE, + }, + { + .name = "File System", + .offset = MTDPART_OFS_APPEND, /* Offset = 0x680000 */ + .size = MTDPART_SIZ_FULL, + }, +}; + +static struct omap_nand_platform_data omap3thunder_nand_data = { + .options = NAND_BUSWIDTH_16, + .parts = omap3thunder_nand_partitions, + .nr_parts = ARRAY_SIZE(omap3thunder_nand_partitions), + .dma_channel = -1, /* disable DMA in OMAP NAND driver */ + .nand_setup = NULL, + .dev_ready = NULL, +}; + +static struct resource omap3thunder_nand_resource = { + .flags = IORESOURCE_MEM, +}; + +static struct platform_device omap3thunder_nand_device = { + .name = "omap2-nand", + .id = -1, + .dev = { + .platform_data = &omap3thunder_nand_data, + }, + .num_resources = 1, + .resource = &omap3thunder_nand_resource, +}; + +#include "sdram-micron-mt46h32m32lf-6.h" + +static struct omap_uart_config omap3_thunder_uart_config__initdata = { + .enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)), +}; + +static struct twl4030_usb_data thunder_usb_data = { + .usb_mode = T2_USB_MODE_ULPI, +}; + +static struct twl4030_hsmmc_info mmc[] = { + { + .mmc = 1, + .wires = 8, + .gpio_cd = -EINVAL, + .gpio_wp = 29, + }, + { + .mmc = 2, + .wires = 4, + .gpio_cd = -EINVAL, + .gpio_wp = -EINVAL, + + }, + {} /* Terminator */ +}; + +static struct regulator_consumer_supply thunder_vmmc1_supply = { + .supply = "vmmc", +}; + +static struct regulator_consumer_supply thunder_vmmc2_supply = { + .supply = "vmmc", +}; + + +static struct regulator_consumer_supply thunder_vsim_supply = { + .supply = "vmmc_aux", +}; + +static struct gpio_led gpio_leds[] = { + { + .name = "thunderboard::usr0", + .default_trigger = "heartbeat", + .gpio = -EINVAL, /* gets replaced */ + .active_low = true, + }, +}; + +static int thunder_twl_gpio_setup (struct device *dev, + unsigned gpio, unsigned ngpio) +{ + omap_mux_init_gpio(29,OMAP_PIN_INPUT); + mmc[0].gpio_cd = gpio + 0; + twl4030_mmc_init(mmc); + + /* link regulators to MMC adapters */ + thunder_vmmc1_supply.dev = mmc[0].dev; + thunder_vmmc2_supply.dev = mmc[1].dev; + thunder_vsim_supply.dev = mmc[0].dev; + + /* the LED marked LED 2 (LEDA) */ + gpio_leds[0].gpio = gpio + TWL4030_GPIO_MAX + 1; + + /* gpio + 7 == DVI Enable */ + gpio_request(gpio + 7, "EN_DVI"); + gpio_direction_output(gpio + 7, 0); + + return 0; +} + +static struct twl4030_gpio_platform_data thunder_gpio_data = { + .gpio_base = OMAP_MAX_GPIO_LINES, + .irq_base = TWL4030_GPIO_IRQ_BASE, + .irq_end = TWL4030_GPIO_IRQ_END, + .use_leds = false, + .pullups = BIT(1), + .pulldowns = BIT(2) | BIT(6) | BIT(7) | BIT(8) | BIT(13) + | BIT(15) | BIT(16) | BIT(17), + .setup = thunder_twl_gpio_setup, +}; + + +/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */ +static struct regulator_init_data thunder_vmmc1 = { + .constraints = { + .min_uV = 1850000, + .max_uV = 3150000, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE + | REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = 1, + .consumer_supplies = &thunder_vmmc1_supply, +}; + + +static struct regulator_init_data thunder_vmmc2 = { + .constraints = { + .min_uV = 1850000, + .max_uV = 3150000, + .apply_uV = true, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = 1, + .consumer_supplies = &thunder_vmmc2_supply, +}; + +/* VSIM for MMC1 pins DAT4..DAT7 (2 mA, plus card == max 50 mA) */ +static struct regulator_init_data thunder_vsim = { + .constraints = { + .min_uV = 1800000, + .max_uV = 3000000, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE + | REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = 1, + .consumer_supplies = &thunder_vsim_supply, +}; + +static struct regulator_consumer_supply thunder_vdda_dac_supply = { + .supply = "vdda_dac", + .dev = &thunder_dss_device.dev, +}; + + +/* VDAC for DSS driving S-Video (8 mA unloaded, max 65 mA) */ +static struct regulator_init_data thunder_vdac = { + .constraints = { + .min_uV = 1800000, + .max_uV = 1800000, + .apply_uV = true, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = 1, + .consumer_supplies = &thunder_vdda_dac_supply, +}; + +/* VPLL2 for digital video outputs */ +static struct regulator_init_data thunder_vpll2 = { + .constraints = { + .name = "VDVI", + .min_uV = 1800000, + .max_uV = 1800000, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = 1, + .consumer_supplies = &thunder_vdds_dsi_supply, +}; + + + +static struct twl4030_platform_data thunder_twldata = { + .irq_base = TWL4030_IRQ_BASE, + .irq_end = TWL4030_IRQ_END, + + /* platform_data for children goes here */ + .usb = &thunder_usb_data, + .gpio = &thunder_gpio_data, + .vmmc1 = &thunder_vmmc1, + .vmmc2 = &thunder_vmmc2, + .vsim = &thunder_vsim, + .vdac = &thunder_vdac, + .vpll2 = &thunder_vpll2, +}; + +static struct i2c_board_info __initdata thunder_i2c_boardinfo[] = { + { + I2C_BOARD_INFO("twl4030", 0x48), + .flags = I2C_CLIENT_WAKE, + .irq = INT_34XX_SYS_NIRQ, + .platform_data = &thunder_twldata, + }, +}; + +static int __init omap3_thunder_i2c_init (void ) +{ + omap_register_i2c_bus(1, 2600, thunder_i2c_boardinfo, ARRAY_SIZE(thunder_i2c_boardinfo)); + omap_register_i2c_bus(2, 100,NULL, 0); + omap_register_i2c_bus(3, 100, NULL, 0); + return 0; +} + +static void __init omap3_thunder_init_irq (void ) +{ + omap2_init_common_hw(mt46h32m32lf6_sdrc_params, mt46h32m32lf6_sdrc_params); + omap_init_irq(); + omap_gpio_init(); +} + +static struct gpio_led_platform_data gpio_led_info = { + .leds = gpio_leds, + .num_leds = ARRAY_SIZE(gpio_leds), +}; + +static struct platform_device leds_gpio = { + .name = "leds-gpio", + .id = -1, + .dev = { + .platform_data = &gpio_led_info, + }, +}; + +static struct gpio_keys_button gpio_buttons[] = { + { + .code = BTN_EXTRA, + .gpio = 7, + .desc = "user", + .wakeup = 1, + }, +}; + +static struct gpio_keys_platform_data gpio_key_info = { + .buttons = gpio_buttons, + .nbuttons = ARRAY_SIZE(gpio_buttons), +}; + +static struct platform_device keys_gpio = { + .name = "gpio-keys", + .id = -1, + .dev = { + .platform_data = &gpio_key_info, + }, +}; + +static void ads7846_dev_init (void ) +{ + if (gpio_request(OMAP3_THUNDER_TS_GPIO, "ADS7846 pendown") < 0) + printk(KERN_ERR "can't get ads7846 pen down GPIO\n"); + + gpio_direction_input(OMAP3_THUNDER_TS_GPIO); + + omap_set_gpio_debounce(OMAP3_THUNDER_TS_GPIO, 1); + omap_set_gpio_debounce_time(OMAP3_THUNDER_TS_GPIO, 0xa); +} + +static int ads7846_get_pendown_state (void ) +{ + return !gpio_get_value(OMAP3_THUNDER_TS_GPIO); +} + +struct ads7846_platform_data ads7846_config = { + .x_max = 0x0fff, + .y_max = 0x0fff, + .x_plate_ohms = 180, + .pressure_max = 255, + .debounce_max = 10, + .debounce_tol = 3, + .debounce_rep = 1, + .get_pendown_state = ads7846_get_pendown_state, + .keep_vref_on = 1, + .settle_delay_usecs = 150, +}; + + +static struct omap2_mcspi_device_config ads7846_mcspi_config = { + .turbo_mode = 0, + .single_channel = 1, /* 0: slave, 1: master */ +}; + + +struct spi_board_info omap3thunder_spi_board_touch[] = { + { + .modalias = "ads7846", + .bus_num = 1, + .chip_select = 0, + .max_speed_hz = 1500000, + .controller_data = &ads7846_mcspi_config, + .irq = OMAP_GPIO_IRQ(OMAP3_THUNDER_TS_GPIO), + .platform_data = &ads7846_config, + }, +}; + + +/* G-sensor on SPI bus 4 */ +static struct spi_board_info omap3thunder_spi_board_info[] = { + { + .modalias = "spidev", + .max_speed_hz = 1500000, + .bus_num = 4, + .chip_select = 0, + .mode = SPI_MODE_0, + }, +}; + +static struct omap_board_config_kernel omap3_thunder_config[]__initdata = { +}; + +static struct platform_device *omap3_thunder_devices[]__initdata = { + &thunder_dss_device, + &leds_gpio, + &keys_gpio, +}; + +static void __init omap3thunder_flash_init (void ) +{ + u8 cs = 0; + u8 nandcs = GPMC_CS_NUM + 1; + + u32 gpmc_base_add = OMAP34XX_GPMC_VIRT; + + /* find out the chip-select on which NAND exists */ + while (cs < GPMC_CS_NUM) { + u32 ret = 0; + ret = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1); + + if ((ret & 0xC00) == 0x800) { + printk(KERN_INFO "Found NAND on CS%d\n", cs); + if (nandcs > GPMC_CS_NUM) + nandcs = cs; + } + cs++; + } + + if (nandcs > GPMC_CS_NUM) { + printk(KERN_INFO "NAND: Unable to find configuration " + "in GPMC\n "); + return; + } + + if (nandcs < GPMC_CS_NUM) { + omap3thunder_nand_data.cs = nandcs; + omap3thunder_nand_data.gpmc_cs_baseaddr = (void *) + (gpmc_base_add + GPMC_CS0_BASE + nandcs * GPMC_CS_SIZE); + omap3thunder_nand_data.gpmc_baseaddr = (void *) (gpmc_base_add); + + printk(KERN_INFO "Registering NAND on CS%d\n", nandcs); + if (platform_device_register(&omap3thunder_nand_device) < 0) + printk(KERN_ERR "Unable to register NAND device\n"); + } +} + + +static struct ehci_hcd_omap_platform_data ehci_pdata__initconst = { + .port_mode[0] = EHCI_HCD_OMAP_MODE_UNKNOWN, + .port_mode[1] = EHCI_HCD_OMAP_MODE_PHY, + .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN, + + .phy_reset = false, + .reset_gpio_port[0] = -EINVAL, + .reset_gpio_port[1] = 162, + .reset_gpio_port[2] = -EINVAL +}; + +static void __init omap3_thunder_init (void ) +{ + omap3_thunder_i2c_init(); + + /* Turn on Wireless LAN */ + gpio_request( 157 , "WIFI ENABLE"); + gpio_direction_output( 157, 0); + + platform_add_devices(omap3_thunder_devices, + ARRAY_SIZE(omap3_thunder_devices)); + omap_board_config = omap3_thunder_config; + omap_board_config_size = ARRAY_SIZE(omap3_thunder_config); + omap_serial_init(); + + usb_musb_init(); + usb_ehci_init(&ehci_pdata); + omap3thunder_flash_init(); + + ads7846_dev_init(); + spi_register_board_info(omap3thunder_spi_board_touch, ARRAY_SIZE(omap3thunder_spi_board_touch)); + spi_register_board_info(omap3thunder_spi_board_info, ARRAY_SIZE(omap3thunder_spi_board_info)); + + thunder_display_init(); +} + +static void __init omap3_thunder_map_io (void ) +{ + omap2_set_globals_343x(); + omap2_map_common_io(); +} + +MACHINE_START (OMAP3_THUNDER ,"OMAP3 Thunder Board" ) + /* Maintainer: Daniel Toussaint [email protected] */ + .phys_io = 0x48000000, + .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, + .boot_params = 0x80000100, + .map_io = omap3_thunder_map_io, + .init_irq = omap3_thunder_init_irq, + .init_machine = omap3_thunder_init, + .timer = &omap_timer, +MACHINE_END drivers/video/omap2/displays/Kconfig +0
-0@@ -25,4 +25,11 @@ config PANEL_TAALhelp
Taal DSI command mode panel from TPO.drivers/video/omap2/displays/Kconfig +7
-0+config PANEL_LG_LB043WQ2 + tristate "LG LB043WQ2 Panel" + depends on OMAP2_DSS + help + LG LB043WQ2 Panel on Thunder board + +endmenu
drivers/video/omap2/displays/Makefile +0
-0@@ -3,3 +3,5 @@ obj-$(CONFIG_PANEL_SAMSUNG_LTE430WQ_F0C) += panel-samsung-lte430wq-f0c.oobj-$(CONFIG_PANEL_SHARP_LS037V7DW01) += panel-sharp-ls037v7dw01.o
obj-$(CONFIG_PANEL_TAAL) += panel-taal.o
drivers/video/omap2/displays/Makefile +2
-0+obj-$(CONFIG_PANEL_LG_LB043WQ2) += panel-lg-lb043wq2.o +drivers/video/omap2/displays/panel-lg-lb043wq2.c new file +118
-0@@ -0,0 +1,118 @@ +/* +* LCD panel driver for LG LB043WQ2 panel +* +* Daniel Toussaint <[email protected]> +* +* Modified from Sharp LS037V7DW01 +* This program is free software; you can redistribute it and/or modify it +* under the terms of the GNU General Public License version 2 as published by +* the Free Software Foundation. +* +* This program is distributed in the hope that it will be useful, but WITHOUT +* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or +* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for +* more details. +* +* You should have received a copy of the GNU General Public License along with +* this program. If not, see <http://www.gnu.org/licenses/>. +*/ + + + +#include <linux/module.h> +#include <linux/delay.h> + +#include <plat/display.h> + +static struct omap_video_timings lg_lb043wq2_timings = { + .x_res = 480, + .y_res = 272, + + .hsw = 41, + .hfp = 8, + .hbp = 45-41, + + .vsw = 10, + .vfp = 4, + .vbp = 12-10, + + + .pixel_clock = 8000, + +}; + +static int lg_lb043wq2_panel_probe (struct omap_dss_device *dssdev) +{ + dssdev->panel.config = OMAP_DSS_LCD_TFT | OMAP_DSS_LCD_IVS | + OMAP_DSS_LCD_IHS; + dssdev->panel.timings = lg_lb043wq2_timings; + + return 0; +} + +static void lg_lb043wq2_panel_remove (struct omap_dss_device *dssdev) +{ +} + +static int lg_lb043wq2_panel_enable (struct omap_dss_device *dssdev) +{ + int r = 0; + + /* wait couple of vsyncs until enabling the LCD */ + msleep(50); + + if (dssdev->platform_enable) + r = dssdev->platform_enable(dssdev); + + return r; +} + +static void lg_lb043wq2_panel_disable (struct omap_dss_device *dssdev) +{ + if (dssdev->platform_disable) + dssdev->platform_disable(dssdev); + + /* wait at least 5 vsyncs after disabling the LCD */ + + msleep(100); +} + +static int lg_lb043wq2_panel_suspend (struct omap_dss_device *dssdev) +{ + lg_lb043wq2_panel_disable(dssdev); + return 0; +} + +static int lg_lb043wq2_panel_resume (struct omap_dss_device *dssdev) +{ + return lg_lb043wq2_panel_enable(dssdev); +} + +static struct omap_dss_driver lg_lb043wq2_driver = { + .probe = lg_lb043wq2_panel_probe, + .remove = lg_lb043wq2_panel_remove, + + .enable = lg_lb043wq2_panel_enable, + .disable = lg_lb043wq2_panel_disable, + .suspend = lg_lb043wq2_panel_suspend, + .resume = lg_lb043wq2_panel_resume, + + .driver = { + .name = "panel-lg-lb043wq2", + .owner = THIS_MODULE, + }, +}; + +static int __init lg_lb043wq2_panel_drv_init (void ) +{ + return omap_dss_register_driver(&lg_lb043wq2_driver); +} + +static void __exit lg_lb043wq2_panel_drv_exit(void) +{ + omap_dss_unregister_driver(&lg_lb043wq2_driver); +} + +module_init (lg_lb043wq2_panel_drv_init); +module_exit (lg_lb043wq2_panel_drv_exit); +MODULE_LICENSE ("GPL" );sound/soc/omap/Kconfig +0
-0@@ -116,3 +116,13 @@ config SND_OMAP_SOC_IGEP0020select
SND_SOC_TWL4030
help
Say Y if you want to add support for Soc audio on IGEP v2 board.sound/soc/omap/Kconfig +10
-0+ +config SND_OMAP_SOC_OMAP3_THUNDER + tristate "SoC Audio support for OMAP3 Thunder" + depends on TWL4030_CORE && SND_OMAP_SOC && MACH_OMAP3_THUNDER + select SND_OMAP_SOC_MCBSP + select SND_SOC_TWL4030 + help + Say Y if you want to add support for SoC audio on the Thunder Board. + +sound/soc/omap/Makefile +0
-0@@ -18,6 +18,7 @@ snd-soc-omap3pandora-objs := omap3pandora.osnd-soc-omap3beagle-objs := omap3beagle.o
snd-soc-zoom2-objs := zoom2.o
snd-soc-igep0020-objs := igep0020.o
+snd-soc-omap3thunder-objs := omap3thunder.oobj-$(CONFIG_SND_OMAP_SOC_N810) += snd-soc-n810.o obj-$(CONFIG_SND_OMAP_SOC_AMS_DELTA) += snd-soc-ams-delta.o
sound/soc/omap/Makefile +0
-0@@ -31,3 +32,5 @@ obj-$(CONFIG_SND_OMAP_SOC_OMAP3_PANDORA) += snd-soc-omap3pandora.oobj-$(CONFIG_SND_OMAP_SOC_OMAP3_BEAGLE) += snd-soc-omap3beagle.o obj-$(CONFIG_SND_OMAP_SOC_ZOOM2) += snd-soc-zoom2.o obj-$(CONFIG_SND_OMAP_SOC_IGEP0020) += snd-soc-igep0020.o
sound/soc/omap/Makefile +2
-0+obj-$(CONFIG_SND_OMAP_SOC_OMAP3_THUNDER) += snd-soc-omap3thunder.o +sound/soc/omap/omap3thunder.c new file +152
-0@@ -0,0 +1,160 @@ +/* +* omap3 audio support for Technexion Thunder boards. +* Modified from omap3beagle.c +* Daniel Toussaint <[email protected]> +* +* This program is free software; you can redistribute it and/or +* modify it under the terms of the GNU General Public License +* version 2 as published by the Free Software Foundation. +* +* This program is distributed in the hope that it will be useful, but +* WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +* General Public License for more details. +* +* You should have received a copy of the GNU General Public License +* along with this program; if not, write to the Free Software +* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA +* 02110-1301 USA +* +*/ + + +#include <linux/clk.h> +#include <linux/platform_device.h> +#include <sound/core.h> +#include <sound/pcm.h> +#include <sound/soc.h> +#include <sound/soc-dapm.h> + +#include <asm/mach-types.h> +#include <plat/hardware.h> +#include <plat/gpio.h> +#include <plat/mcbsp.h> + +#include "omap-mcbsp.h" +#include "omap-pcm.h" +#include "../codecs/twl4030.h" + +static int omap3thunder_hw_params (struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_dai *codec_dai = rtd->dai->codec_dai; + struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai; + unsigned int fmt; + int ret; + + switch (params_channels(params)) { + case 2: /* Stereo I2S mode */ + fmt = SND_SOC_DAIFMT_I2S | + SND_SOC_DAIFMT_NB_NF | + SND_SOC_DAIFMT_CBM_CFM; + break; + case 4: /* Four channel TDM mode */ + fmt = SND_SOC_DAIFMT_DSP_A | + SND_SOC_DAIFMT_IB_NF | + SND_SOC_DAIFMT_CBM_CFM; + break; + default: + return -EINVAL; + } + + /* Set codec DAI configuration */ + ret = snd_soc_dai_set_fmt(codec_dai, fmt); + if (ret < 0) { + printk(KERN_ERR "can't set codec DAI configuration\n"); + return ret; + } + + /* Set cpu DAI configuration */ + ret = snd_soc_dai_set_fmt(cpu_dai, fmt); + if (ret < 0) { + printk(KERN_ERR "can't set cpu DAI configuration\n"); + return ret; + } + + /* Set the codec system clock for DAC and ADC */ + ret = snd_soc_dai_set_sysclk(codec_dai, 0, 26000000, + SND_SOC_CLOCK_IN); + if (ret < 0) { + printk(KERN_ERR "can't set codec system clock\n"); + return ret; + } + + return 0; +} + +static struct snd_soc_ops omap3thunder_ops = { + .hw_params = omap3thunder_hw_params, +}; + +/* Digital audio interface glue - connects codec <--> CPU */ +static struct snd_soc_dai_link omap3thunder_dai = { + .name = "TWL4030", + .stream_name = "TWL4030", + .cpu_dai = &omap_mcbsp_dai[0], + .codec_dai = &twl4030_dai[TWL4030_DAI_HIFI], + .ops = &omap3thunder_ops, +}; + +/* Audio machine driver */ +static struct snd_soc_card snd_soc_omap3thunder = { + .name = "omap3thunder", + .platform = &omap_soc_platform, + .dai_link = &omap3thunder_dai, + .num_links = 1, +}; + +/* Audio subsystem */ +static struct snd_soc_device omap3thunder_snd_devdata = { + .card = &snd_soc_omap3thunder, + .codec_dev = &soc_codec_dev_twl4030, +}; + +static struct platform_device *omap3thunder_snd_device; + +static int __init omap3thunder_soc_init (void ) +{ + int ret; + + if (!machine_is_omap3_thunder()) { + pr_debug("Not OMAP3 thunder!\n"); + return -ENODEV; + } + pr_info("OMAP3 thunder SoC init\n"); + + omap3thunder_snd_device = platform_device_alloc("soc-audio", -1); + if (!omap3thunder_snd_device) { + printk(KERN_ERR "Platform device allocation failed\n"); + return -ENOMEM; + } + + platform_set_drvdata(omap3thunder_snd_device, &omap3thunder_snd_devdata); + omap3thunder_snd_devdata.dev = &omap3thunder_snd_device->dev; + *(unsigned int *)omap3thunder_dai.cpu_dai->private_data = 1; /* McBSP2 */ + + ret = platform_device_add(omap3thunder_snd_device); + if (ret) + goto err1; + + return 0; + +err1: + printk(KERN_ERR "Unable to add platform device\n"); + platform_device_put(omap3thunder_snd_device); + + return ret; +} + +static void __exit omap3thunder_soc_exit(void) +{ + platform_device_unregister(omap3thunder_snd_device);
Quoted 10 lines
sound/soc/omap/omap3thunder.c line 160
Quoted 8 lines
sound/soc/omap/omap3thunder.c new file +8
-0+} + +module_init (omap3thunder_soc_init); +module_exit (omap3thunder_soc_exit); + +MODULE_AUTHOR ("Steve Sakoman <[email protected]>" ); +MODULE_DESCRIPTION ("ALSA SoC OMAP3 thunder" ); +MODULE_LICENSE ("GPL" );
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Tony Lindgren
maintainerQuoted 11 lines · Daniel Toussaint
Quoted 8 lines
Cool. Can you please split the the patches into following separate patches:
1. Add minimal board support
2. Add defconfig
3. Add ASoC support
4. Add DSS2 supportOk, so can the DSS2 related stuff be ifdef-ed in the board file ,or does it have to be completely seperated ?
Please leave it out for now as the DSS2 code is not merged yet.
That can be patched in later on, it's best to leave out all the dependencies from patches when possible.
Also, your patches need to be against current Linus' mainline tree, not against linux-omap master branch as we already have DSS2 merged in for testing.
Regards,
Tony
Quoted 13 lines · Tony Lindgren
Quoted 11 lines · Daniel Toussaint
Quoted 8 lines
Cool. Can you please split the the patches into following separate patches:
1. Add minimal board support
2. Add defconfig
3. Add ASoC support
4. Add DSS2 supportOk, so can the DSS2 related stuff be ifdef-ed in the board file ,or does it have to be completely seperated ?
Quoted 8 lines
Please leave it out for now as the DSS2 code is not merged yet.
That can be patched in later on, it's best to leave out all the dependencies from patches when possible.
Also, your patches need to be against current Linus' mainline tree, not against linux-omap master branch as we already have DSS2 merged in for testing.
Mainline ? ok. I noticed mainline is still using <mach/xxxx> instead of <plat/xxxx> and there no support for the ehci reset with GPIO's. Or am I looking at the wrong tree ?
Quoted 4 lines
Regards,
Tony
Quoted 19 lines · Daniel Toussaint
Quoted 18 lines · Tony Lindgren
Quoted 11 lines · Daniel Toussaint
Quoted 8 lines
Cool. Can you please split the the patches into following separate patches:
1. Add minimal board support
2. Add defconfig
3. Add ASoC support
4. Add DSS2 supportOk, so can the DSS2 related stuff be ifdef-ed in the board file ,or does it have to be completely seperated ?
Please leave it out for now as the DSS2 code is not merged yet.
That can be patched in later on, it's best to leave out all the dependencies from patches when possible.
Quoted 7 lines
Quoted 3 lines
Also, your patches need to be against current Linus' mainline tree, not against linux-omap master branch as we already have DSS2 merged in for testing.
Mainline ? ok. I noticed mainline is still using <mach/xxxx> instead of <plat/xxxx> and there no support for the ehci reset with GPIO's. Or am I looking at the wrong tree ?
ehci-omap is still in Greg's tree; it hasn't reached mainline yet. You should see it by next week, with the GPIO reset stuff in.
For now, you can take mainline + Greg's usb queue at [1]
- Anand
[1] <http://www.kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/gregkh-all-2.6.32.patch>