Problems with serial interrupts with IPMI 2.0 SoL
Hi,
I'm using a system with an embedded IPMI 2.0 BMC which provides SoL (Supermicro X8SIL-F). This works fine under Linux (fully interrupt driven), but fails for Xen as it appears to not be sending interrupts; it works OK if I set the driver to polling mode.
I'm assuming the Xen is tickling some bug in the emulated 16550. The Linux driver has a couple of pieces of code to explicitly work around bugs in the Intel AMT SoL implementation, but I don't think they're coming into play here (because there are no Intel SoL PCI devices on this system to trigger the NO_TXEN_TEST flag).
I'm wondering if you have any pointers or suggestions about more subtle problems?
Thanks,
J
Em Thu, 10 Dec 2009 13:45:54 -0800
Jeremy Fitzhardinge <[email protected]> escreveu:
Quoted 7 lines
Hi,
I'm using a system with an embedded IPMI 2.0 BMC which provides SoL (Supermicro X8SIL-F). This works fine under Linux (fully interrupt driven), but fails for Xen as it appears to not be sending interrupts; it works OK if I set the driver to polling mode.
Quoted 8 lines
I'm assuming the Xen is tickling some bug in the emulated 16550. The Linux driver has a couple of pieces of code to explicitly work around bugs in the Intel AMT SoL implementation, but I don't think they're coming into play here (because there are no Intel SoL PCI devices on this system to trigger the
NO_TXEN_TESTflag).I'm wondering if you have any pointers or suggestions about more subtle problems?
If you don't hit NO_TXEN_TEST flag, you'll be loosing interrupts, as the emulation of 16550 is not perfect.
As far as I remember, interrupts take too long to happen with the emulated 16550, when comparing with a normal serial.
Signature · 2 lines
Cheers, Mauro