Skip to contentSkip to conversation

Pinnacle Hybrid Pro Stick USB scan problems

DISCUSSION Andreas Lunderhage 3 participants 4 messages Dec 14, 2009 – Dec 19, 2009 Media (V4L/DVB)

lore
Share & tools
lore
#0 lore raw

Hi,

I have problems scanning with my Pinnacle Hybrid Pro Stick (320E). When using the scan command, it finds the channels in the first mux in the mux file but it fails to tune the next ones. If I use Kaffeine to scan, it gives the same result but I can also see that the signal strength shows 99% on those muxes it fails to scan.

I thinks this is a problem with the tuning since if I watch one channel and switch to another (on another mux), it fails to tune. If I stop the viewing of the current channel first, then it will succeed tuning the next.

I'm running Ubuntu 9.04 32-bit (kernel 2.6.28-17-generic) with the code built from the repository today. I'm also running Ubuntu 9.10 64-bit (kernel 2.6.31-16) (on another machine), but it gives the same problem.

BR

/Andreas

Output from scan:

scanning /usr/share/dvb/dvb-t/se-Stockholm_Nacka
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' initial transponder 490000000 0 2 9 3 1 2 0
initial transponder 642000000 0 2 9 3 1 2 0
initial transponder 754000000 0 2 9 3 1 2 0
initial transponder 706000000 0 2 9 3 1 2 0
initial transponder 746000000 0 2 9 3 1 2 0
initial transponder 730000000 0 2 9 3 1 2 0

Quoted 1 line
Quoted 1 line
Quoted 1 line

tune to: 490000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE

Network Name 'Teracom_Mux_1'
0x0000 0x04d8: pmt_pid 0x04d8 Sveriges Television -- SVT24 (running) 0x0000 0x161c: pmt_pid 0x161c Sveriges Television -- SVT2 Sörmland (running) 0x0000 0x168a: pmt_pid 0x168a Sveriges Television -- SVT1 ABC (running) 0x0000 0x16da: pmt_pid 0x16da Sveriges Television -- SVT1 Sörmland (running) 0x0000 0x1586: pmt_pid 0x1586 Sveriges Television -- SVT2 ABC (running) 0x0000 0x0bc2: pmt_pid 0x0bc2 SR -- SR-P1 (running)
0x0000 0x0bcc: pmt_pid 0x0bcc SR -- SR-P2 Musik (running)
0x0000 0x0bd6: pmt_pid 0x0bd6 SR -- SR-P3 (running)
0x0000 0x0366: pmt_pid 0x0366 Sveriges Television -- Barn/Kunskapsk. (running) 0x0000 0x0500: pmt_pid 0x0500 Sveriges Television -- SVT1 Tal txt (running) 0x0000 0x050a: pmt_pid 0x050a Sveriges Television -- SVT2 Tal txt (running) 0x0000 0xfffe: pmt_pid 0x0712 Boxer TV Access AB -- Boxer Navigator (running, scrambled)

Quoted 1 line
Quoted 1 line
Quoted 1 line

tune to: 642000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE

WARNING: filter timeout pid 0x0011
WARNING: filter timeout pid 0x0000
WARNING: filter timeout pid 0x0010

Quoted 1 line
Quoted 1 line
Quoted 1 line

tune to: 754000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE

WARNING: >>> tuning failed!!!

Quoted 1 line
Quoted 1 line
Quoted 1 line

tune to: 754000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE (tuning failed)

WARNING: >>> tuning failed!!!

Quoted 1 line
Quoted 1 line
Quoted 1 line

tune to: 706000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE

WARNING: >>> tuning failed!!!

Quoted 1 line
Quoted 1 line
Quoted 1 line

tune to: 706000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE (tuning failed)

WARNING: >>> tuning failed!!!

Quoted 1 line
Quoted 1 line
Quoted 1 line

tune to: 746000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE

WARNING: >>> tuning failed!!!

Quoted 1 line
Quoted 1 line
Quoted 1 line

tune to: 746000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE (tuning failed)

WARNING: >>> tuning failed!!!

Quoted 1 line
Quoted 1 line
Quoted 1 line

tune to: 730000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE

WARNING: >>> tuning failed!!!

Quoted 1 line
Quoted 1 line
Quoted 1 line

tune to: 730000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE (tuning failed)

WARNING: >>> tuning failed!!!
dumping lists (12 services)
Done. SVT24:490000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_1_2:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE:1249:1248:1240

SVT2 Sörmland:490000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_1_2:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE:1029:1028:5660

SVT1 ABC:490000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_1_2:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE:1019:1018:5770

SVT1 Sörmland:490000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_1_2:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE:1019:1018:5850

SVT2 ABC:490000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_1_2:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE:1029:1028:5510

SR-P1:490000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_1_2:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE:3019:3018:3010

SR-P2 Musik:490000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_1_2:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE:3019:3028:3020

SR-P3:490000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_1_2:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE:3019:3038:3030

Barn/Kunskapsk.:490000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_1_2:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE:879:878:870

SVT2 Tal txt:490000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_1_2:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE:1299:1026:1290

SVT1 Tal txt:490000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_1_2:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE:1289:1016:1280

Boxer Navigator:490000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_1_2:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE:0:0:65534

--
video4linux-list mailing list
Unsubscribe mailto:[email protected]?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list

#1 lore raw
Quoted 8 lines · Andreas Lunderhage

Hi,

I have problems scanning with my Pinnacle Hybrid Pro Stick (320E). When using the scan command, it finds the channels in the first mux in the mux file but it fails to tune the next ones. If I use Kaffeine to scan, it gives the same result but I can also see that the signal strength shows 99% on those muxes it fails to scan.

Quoted 8 lines

I thinks this is a problem with the tuning since if I watch one channel and switch to another (on another mux), it fails to tune. If I stop the viewing of the current channel first, then it will succeed tuning the next.

I'm running Ubuntu 9.04 32-bit (kernel 2.6.28-17-generic) with the code built from the repository today.
I'm also running Ubuntu 9.10 64-bit (kernel 2.6.31-16) (on another machine), but it gives the same problem.

First, make sure you are running the latest v4l-dvb code (instructions at http://linuxtv.org/repo), and then try commenting out line 181 of em28xx-cards.c and see if that fixes the issue.

Devin

Signature · 7 lines
Devin J. Heitmueller - Kernel Labs
http://www.kernellabs.com

--
video4linux-list mailing list
Unsubscribe mailto:[email protected]?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list
#2 lore raw

There is a missing header file in the repo...

/home/lunderhage/v4l-dvb/v4l/radio-miropcm20.c:20:23: error: sound/aci.h: No such file or directory

Can someone push that file into the repo or send it to me, please?

BR
/Andreas

Quoted 20 lines · Devin Heitmueller
Quoted 8 lines · Andreas Lunderhage

Hi,

I have problems scanning with my Pinnacle Hybrid Pro Stick (320E). When using the scan command, it finds the channels in the first mux in the mux file but it fails to tune the next ones. If I use Kaffeine to scan, it gives the same result but I can also see that the signal strength shows 99% on those muxes it fails to scan.

Quoted 9 lines

I thinks this is a problem with the tuning since if I watch one channel and switch to another (on another mux), it fails to tune. If I stop the viewing of the current channel first, then it will succeed tuning the next.

I'm running Ubuntu 9.04 32-bit (kernel 2.6.28-17-generic) with the code built from the repository today.
I'm also running Ubuntu 9.10 64-bit (kernel 2.6.31-16) (on another machine), but it gives the same problem.

Quoted 7 lines

First, make sure you are running the latest v4l-dvb code (instructions at http://linuxtv.org/repo), and then try commenting out line 181 of em28xx-cards.c and see if that fixes the issue.

Devin

--
video4linux-list mailing list
Unsubscribe mailto:[email protected]?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list

#3 lore raw

Hi Andreas,

Quoted 6 lines · Andreas Lunderhage

There is a missing header file in the repo...

/home/lunderhage/v4l-dvb/v4l/radio-miropcm20.c:20:23: error: sound/aci.h: No such file or directory

Can someone push that file into the repo or send it to me, please?

Thanks for your report.

Please add into v4l/versions.txt file:
[2.6.33]
RADIO_MIROPCM20

then

make distclean
make
make rmmod
make install

Cheers
Douglas

Quoted 33 lines

BR
/Andreas

Quoted 24 lines · Devin Heitmueller
Quoted 8 lines · Andreas Lunderhage

Hi,

I have problems scanning with my Pinnacle Hybrid Pro Stick (320E). When using the scan command, it finds the channels in the first mux in the mux file but it fails to tune the next ones. If I use Kaffeine to scan, it gives the same result but I can also see that the signal strength shows 99% on those muxes it fails to scan.

Quoted 8 lines

I thinks this is a problem with the tuning since if I watch one channel and switch to another (on another mux), it fails to tune. If I stop the viewing of the current channel first, then it will succeed tuning the next.

I'm running Ubuntu 9.04 32-bit (kernel 2.6.28-17-generic) with the code built from the repository today.
I'm also running Ubuntu 9.10 64-bit (kernel 2.6.31-16) (on another machine), but it gives the same problem.

First, make sure you are running the latest v4l-dvb code (instructions at http://linuxtv.org/repo), and then try commenting out line 181 of em28xx-cards.c and see if that fixes the issue.

Devin

Signature · 3 lines
video4linux-list mailing list
Unsubscribe mailto:[email protected]?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list