Stable version 2.6.32.2 broke my KMS Radeon setup
Hello,
After upgrading from 2.6.32.1 to 2.6.32.2 my radeon KMS broke. Broke meaning after kernel boot at the moment radeon module is loaded, I get a blank screen, monitor goes in powersave mode and machine stops booting (ping-able but can't login via ssh and nothing in the logs after Sysrq-S-U-B reboot).
Upgraded userspace (drm/mesa/xf86-video-ati) to git version from 19-december but no change.
Note this happens on 2 different systems, both connected via DVI-D to an LCD monitor:
Chipset: "ATI RV730XT [Radeon HD 4670]" (ChipID = 0x9490)
and
Chipset: "ATI Radeon HD 3200 Graphics" (ChipID = 0x9610)
So I started looking at the diff between 2.6.32.1 & 2.6.32.2, backing out attached change makes everything work again. Anything else I can provide to debug/fix this, let me know.
Ruud
atombios_crtc.c.NEW renamed from atombios_crtc.c +4 -4
@@ -241,6 +241,7 @@ { struct drm_device *dev = crtc->dev; struct radeon_device *rdev = dev->dev_private; + struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc); switch (mode) { case DRM_MODE_DPMS_ON:
@@ -248,20 +249,19 @@ if (ASIC_IS_DCE3(rdev)) atombios_enable_crtc_memreq(crtc, 1); atombios_blank_crtc(crtc, 0); + drm_vblank_post_modeset(dev, radeon_crtc->crtc_id); + radeon_crtc_load_lut(crtc); break; case DRM_MODE_DPMS_STANDBY: case DRM_MODE_DPMS_SUSPEND: case DRM_MODE_DPMS_OFF: + drm_vblank_pre_modeset(dev, radeon_crtc->crtc_id); atombios_blank_crtc(crtc, 1); if (ASIC_IS_DCE3(rdev)) atombios_enable_crtc_memreq(crtc, 0); atombios_enable_crtc(crtc, 0); break; } - - if (mode != DRM_MODE_DPMS_OFF) { - radeon_crtc_load_lut(crtc); - } } static void
2009/12/20 Ruud Linders <[email protected]>:
Quoted 18 lines
Hello,
After upgrading from 2.6.32.1 to 2.6.32.2 my radeon KMS broke. Broke meaning after kernel boot at the moment radeon module is loaded, I get a blank screen, monitor goes in powersave mode and machine stops booting (ping-able but can't login via ssh and nothing in the logs after Sysrq-S-U-B reboot).
Upgraded userspace (drm/mesa/xf86-video-ati) to git version from 19-december but no change.
Note this happens on 2 different systems, both connected via DVI-D to an LCD monitor:
Chipset: "ATI RV730XT [Radeon HD 4670]" (ChipID =0x9490) and
Chipset: "ATI Radeon HD 3200 Graphics" (ChipID =0x9610)
Quoted 4 lines
So I started looking at the diff between 2.6.32.1 & 2.6.32.2, backing out attached change makes everything work again. Anything else I can provide to debug/fix this, let me know.
Add CC's