Autotools

LTP Michal Simek 2 participants 7 messages Dec 28, 2009 – Jan 2, 2010

Share & tools

Michal Simek

author

2009-12-28 16:59 UTC #0 lore raw

Hi Garret,

I am trying to configure LTP properly.
First thing which seems to me weird is that in INSTALL is for "Using autoconf" command make autotools

autoreconf --install

There are some warnings which could be fixed.

then I am running

./configure --prefix=/tmp/

and I see there

./configure: line 4566: LTP_CHECK_CAPABILITY_SUPPORT: command not found ./configure: line 4567: LTP_CHECK_CRYPTO: command not found ./configure: line 4568: LTP_CHECK_LINUX_PTRACE: command not found ./configure: line 4569: LTP_CHECK_SELINUX: command not found ./configure: line 4570: LTP_CHECK_SIGNAL: command not found ./configure: line 4571: LTP_CHECK_SYSCALL_EVENTFD: command not found ./configure: line 4572: LTP_CHECK_SYSCALL_MODIFY_LDT: command not found ./configure: line 4573: LTP_CHECK_SYSCALL_NUMA: command not found ./configure: line 4574: LTP_CHECK_SYSCALL_QUOTACTL: command not found ./configure: line 4575: LTP_CHECK_SYSCALL_SIGNALFD: command not found ./configure: line 4576: LTP_CHECK_SYSCALL_UNSHARE: command not found ./configure: line 4577: LTP_CHECK_TASKSTATS: command not found

./configure: line 4759: REALTIME_CHECK_PRIO_INHERIT: command not found ./configure: line 4760: REALTIME_CHECK_ROBUST_APIS: command not found

+ there are some missing dependency in configure.ac file. This patch should add them. I just grep whole LTP source - maybe some are not important.

configure.ac +15 -0

index 52f3381..7a72b36 100644
@@ -39,11 +39,26 @@ AC_CHECK_HEADERS([ \
      linux/mempolicy.h \
      linux/module.h \
      linux/netlink.h \
+    linux/ptrace.h \
+    linux/cgroupstats.h \
+    linux/taskstats.h \
+    linux/types.h \
      sys/acl.h \
      sys/epoll.h \
      sys/inotify.h \
+    sys/ptrace.h \
+    sys/reg.h \
+    asm/ldt.h \
+    asm/ptrace.h \
      sys/jfsdmapi.h \
      sys/prctl.h \
+    sys/epoll.h \
+    sys/ptrace.h \
+    sys/reg.h \
+    sys/stat.h \
+    sys/time.h \
+    sys/types.h \
+    sys/vfs.h \
  ])

and then run make - there previous fault in configure caused that there are wrong symbols in Makefiles - for example for my case.

microblaze-unknown-linux-gnu-gcc: @SELINUX_LIBS@: No such file or directory

which is caused by problems in configure.

Thanks for fixing,
Michal

Signature · 14 lines

Michal Simek, Ing. (M.Eng)
PetaLogix - Linux Solutions for a Reconfigurable World
w: www.petalogix.com p: +61-7-30090663,+42-0-721842854 f: +61-7-30090663

------------------------------------------------------------------------------
This SF.Net email is sponsored by the Verizon Developer Community
Take advantage of Verizon's best-in-class app development support
A streamlined, 14 day to market process makes app distribution fast and easy
Join now and get one step closer to millions of Verizon customers
http://p.sf.net/sfu/verizon-dev2dev 
_______________________________________________
Ltp-list mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/ltp-list

Garrett Cooper

2009-12-28 17:46 UTC #1 lore raw

Michal,
Just invoke autoreconf -I m4 and you'll get your desired result.
No commit required (except maybe another 'recipe' in INSTALL -- which I'd be more than happy to do after the 5th when I have real Internet access ;]...). The problem with your proposed method is that it was skipping a large number of autoconf portability tests in the .m4 files, thus the configuration was pretty minimal... Cheers!
-Garrett

Sent from my iPhone

Quoted 72 lines · Michal Simek

Hi Garret,
I am trying to configure LTP properly.
First thing which seems to me weird is that in INSTALL is for "Using autoconf" command make autotools
autoreconf --install
There are some warnings which could be fixed.
then I am running
./configure --prefix=/tmp/
and I see there
./configure: line 4566: LTP_CHECK_CAPABILITY_SUPPORT: command not found
./configure: line 4567: LTP_CHECK_CRYPTO: command not found ./configure: line 4568: LTP_CHECK_LINUX_PTRACE: command not found ./configure: line 4569: LTP_CHECK_SELINUX: command not found ./configure: line 4570: LTP_CHECK_SIGNAL: command not found ./configure: line 4571: LTP_CHECK_SYSCALL_EVENTFD: command not found ./configure: line 4572: LTP_CHECK_SYSCALL_MODIFY_LDT: command not found
./configure: line 4573: LTP_CHECK_SYSCALL_NUMA: command not found ./configure: line 4574: LTP_CHECK_SYSCALL_QUOTACTL: command not found ./configure: line 4575: LTP_CHECK_SYSCALL_SIGNALFD: command not found ./configure: line 4576: LTP_CHECK_SYSCALL_UNSHARE: command not found ./configure: line 4577: LTP_CHECK_TASKSTATS: command not found
./configure: line 4759: REALTIME_CHECK_PRIO_INHERIT: command not found ./configure: line 4760: REALTIME_CHECK_ROBUST_APIS: command not found
+ there are some missing dependency in configure.ac file. This patch should add them. I just grep whole LTP source - maybe some are not important.
configure.ac +15 -0
index 52f3381..7a72b36 100644
@@ -39,11 +39,26 @@ AC_CHECK_HEADERS([ \
    linux/mempolicy.h \
    linux/module.h \
    linux/netlink.h \
+    linux/ptrace.h \
+    linux/cgroupstats.h \
+    linux/taskstats.h \
+    linux/types.h \
    sys/acl.h \
    sys/epoll.h \
    sys/inotify.h \
+    sys/ptrace.h \
+    sys/reg.h \
+    asm/ldt.h \
+    asm/ptrace.h \
    sys/jfsdmapi.h \
    sys/prctl.h \
+    sys/epoll.h \
+    sys/ptrace.h \
+    sys/reg.h \
+    sys/stat.h \
+    sys/time.h \
+    sys/types.h \
+    sys/vfs.h \
 ])
 
 
and then run make - there previous fault in configure caused that there are wrong symbols in Makefiles - for example for my case.

Quoted 12 lines

microblaze-unknown-linux-gnu-gcc: @SELINUX_LIBS@: No such file or directory
which is caused by problems in configure.
Thanks for fixing,
Michal
Signature · 3 lines
Michal Simek, Ing. (M.Eng)
PetaLogix - Linux Solutions for a Reconfigurable World
w: www.petalogix.com p: +61-7-30090663,+42-0-721842854 f: +61-7-30090663

------------------------------------------------------------------------------
This SF.Net email is sponsored by the Verizon Developer Community Take advantage of Verizon's best-in-class app development support A streamlined, 14 day to market process makes app distribution fast and easy Join now and get one step closer to millions of Verizon customers
http://p.sf.net/sfu/verizon-dev2dev
_______________________________________________
Ltp-list mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/ltp-list

Michal Simek

author

2009-12-29 09:07 UTC #2 lore raw

Hi,
sorry for head quoting but it is better for your phone.:-) I have interesting fault.
aclocal -I m4 works
but
autoreconf -I m4
aclocal: couldn't open directory `m4': No such file or directory
autoreconf: aclocal failed with exit status: 1

Which versions do you use?
autoconf - 2.65
automake - 1.11
m4 - 1.4.13

Thanks,
Michal

Quoted 97 lines · Garrett Cooper

Michal,
Just invoke autoreconf -I m4 and you'll get your desired result. No
commit required (except maybe another 'recipe' in INSTALL -- which I'd be more than happy to do after the 5th when I have real Internet access ;]...). The problem with your proposed method is that it was skipping a large number of autoconf portability tests in the .m4 files, thus the configuration was pretty minimal...
Cheers!
-Garrett
Sent from my iPhone
Quoted 82 lines · Michal Simek
Hi Garret,
I am trying to configure LTP properly.
First thing which seems to me weird is that in INSTALL is for "Using autoconf" command make autotools
autoreconf --install
There are some warnings which could be fixed.
then I am running
./configure --prefix=/tmp/
and I see there
./configure: line 4566: LTP_CHECK_CAPABILITY_SUPPORT: command not found ./configure: line 4567: LTP_CHECK_CRYPTO: command not found ./configure: line 4568: LTP_CHECK_LINUX_PTRACE: command not found ./configure: line 4569: LTP_CHECK_SELINUX: command not found ./configure: line 4570: LTP_CHECK_SIGNAL: command not found ./configure: line 4571: LTP_CHECK_SYSCALL_EVENTFD: command not found ./configure: line 4572: LTP_CHECK_SYSCALL_MODIFY_LDT: command not found ./configure: line 4573: LTP_CHECK_SYSCALL_NUMA: command not found ./configure: line 4574: LTP_CHECK_SYSCALL_QUOTACTL: command not found ./configure: line 4575: LTP_CHECK_SYSCALL_SIGNALFD: command not found ./configure: line 4576: LTP_CHECK_SYSCALL_UNSHARE: command not found ./configure: line 4577: LTP_CHECK_TASKSTATS: command not found
./configure: line 4759: REALTIME_CHECK_PRIO_INHERIT: command not found ./configure: line 4760: REALTIME_CHECK_ROBUST_APIS: command not found
+ there are some missing dependency in configure.ac file. This patch should add them. I just grep whole LTP source - maybe some are not important.
configure.ac +15 -0
index 52f3381..7a72b36 100644
@@ -39,11 +39,26 @@ AC_CHECK_HEADERS([ \
    linux/mempolicy.h \
    linux/module.h \
    linux/netlink.h \
+    linux/ptrace.h \
+    linux/cgroupstats.h \
+    linux/taskstats.h \
+    linux/types.h \
    sys/acl.h \
    sys/epoll.h \
    sys/inotify.h \
+    sys/ptrace.h \
+    sys/reg.h \
+    asm/ldt.h \
+    asm/ptrace.h \
    sys/jfsdmapi.h \
    sys/prctl.h \
+    sys/epoll.h \
+    sys/ptrace.h \
+    sys/reg.h \
+    sys/stat.h \
+    sys/time.h \
+    sys/types.h \
+    sys/vfs.h \
 ])
 
 
and then run make - there previous fault in configure caused that there are wrong symbols in Makefiles - for example for my case.
microblaze-unknown-linux-gnu-gcc: @SELINUX_LIBS@: No such file or directory
which is caused by problems in configure.
Thanks for fixing,
Michal
Signature · 3 lines
Michal Simek, Ing. (M.Eng)
PetaLogix - Linux Solutions for a Reconfigurable World
w: www.petalogix.com p: +61-7-30090663,+42-0-721842854 f: +61-7-30090663

Signature · 14 lines

Michal Simek, Ing. (M.Eng)
PetaLogix - Linux Solutions for a Reconfigurable World
w: www.petalogix.com p: +61-7-30090663,+42-0-721842854 f: +61-7-30090663

------------------------------------------------------------------------------
This SF.Net email is sponsored by the Verizon Developer Community
Take advantage of Verizon's best-in-class app development support
A streamlined, 14 day to market process makes app distribution fast and easy
Join now and get one step closer to millions of Verizon customers
http://p.sf.net/sfu/verizon-dev2dev 
_______________________________________________
Ltp-list mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/ltp-list

Garrett Cooper

2009-12-29 13:48 UTC #3 lore raw

Yeah, I usually don't top-post, but emailing via smartphones is fun, so... :)

It sounds like your sources are incomplete -- 1) do you have an m4 directory at the top of the source tree and 2) is it populated with m4 files?

Thanks,
-Garrett

PS your tools' versions look ok.

Quoted 111 lines · Michal Simek

Hi,
sorry for head quoting but it is better for your phone.:-) I have interesting fault.
aclocal -I m4 works
but
autoreconf -I m4
aclocal: couldn't open directory `m4': No such file or directory
autoreconf: aclocal failed with exit status: 1
Which versions do you use?
autoconf - 2.65
automake - 1.11
m4 - 1.4.13
Thanks,
Michal
Quoted 93 lines · Garrett Cooper
Michal,
Just invoke autoreconf -I m4 and you'll get your desired result.
No commit required (except maybe another 'recipe' in INSTALL -- which I'd be more than happy to do after the 5th when I have real Internet access ;]...). The problem with your proposed method is that it was skipping a large number of autoconf portability tests in the .m4 files, thus the configuration was pretty minimal... Cheers!
-Garrett
Sent from my iPhone
Quoted 81 lines · Michal Simek
Hi Garret,
I am trying to configure LTP properly.
First thing which seems to me weird is that in INSTALL is for "Using autoconf" command make autotools
autoreconf --install
There are some warnings which could be fixed.
then I am running
./configure --prefix=/tmp/
and I see there
./configure: line 4566: LTP_CHECK_CAPABILITY_SUPPORT: command not found
./configure: line 4567: LTP_CHECK_CRYPTO: command not found ./configure: line 4568: LTP_CHECK_LINUX_PTRACE: command not found ./configure: line 4569: LTP_CHECK_SELINUX: command not found ./configure: line 4570: LTP_CHECK_SIGNAL: command not found ./configure: line 4571: LTP_CHECK_SYSCALL_EVENTFD: command not found ./configure: line 4572: LTP_CHECK_SYSCALL_MODIFY_LDT: command not found
./configure: line 4573: LTP_CHECK_SYSCALL_NUMA: command not found ./configure: line 4574: LTP_CHECK_SYSCALL_QUOTACTL: command not found
./configure: line 4575: LTP_CHECK_SYSCALL_SIGNALFD: command not found
./configure: line 4576: LTP_CHECK_SYSCALL_UNSHARE: command not found ./configure: line 4577: LTP_CHECK_TASKSTATS: command not found
./configure: line 4759: REALTIME_CHECK_PRIO_INHERIT: command not found
./configure: line 4760: REALTIME_CHECK_ROBUST_APIS: command not found
+ there are some missing dependency in configure.ac file. This patch should add them. I just grep whole LTP source - maybe some are not important.
configure.ac +15 -0
index 52f3381..7a72b36 100644
@@ -39,11 +39,26 @@ AC_CHECK_HEADERS([ \
   linux/mempolicy.h \
   linux/module.h \
   linux/netlink.h \
+    linux/ptrace.h \
+    linux/cgroupstats.h \
+    linux/taskstats.h \
+    linux/types.h \
   sys/acl.h \
   sys/epoll.h \
   sys/inotify.h \
+    sys/ptrace.h \
+    sys/reg.h \
+    asm/ldt.h \
+    asm/ptrace.h \
   sys/jfsdmapi.h \
   sys/prctl.h \
+    sys/epoll.h \
+    sys/ptrace.h \
+    sys/reg.h \
+    sys/stat.h \
+    sys/time.h \
+    sys/types.h \
+    sys/vfs.h \
 ])
 
 
and then run make - there previous fault in configure caused that there are wrong symbols in Makefiles - for example for my case.
microblaze-unknown-linux-gnu-gcc: @SELINUX_LIBS@: No such file or directory
which is caused by problems in configure.

Quoted 13 lines

Quoted 7 lines

Thanks for fixing,
Michal

Signature · 3 lines

Michal Simek, Ing. (M.Eng)
PetaLogix - Linux Solutions for a Reconfigurable World
w: www.petalogix.com p: +61-7-30090663,+42-0-721842854 f: +61-7-30090663

Signature · 3 lines

Michal Simek, Ing. (M.Eng)
PetaLogix - Linux Solutions for a Reconfigurable World
w: www.petalogix.com p: +61-7-30090663,+42-0-721842854 f: +61-7-30090663

Michal Simek

author

2009-12-31 14:10 UTC #4 lore raw

My source is up-to-date - I did clean cvs copy again for sure.

[monstr@monstr ltp]$ ls -la m4/
total 72
drwxrwxr-x 3 monstr monstr 4096 Dec 31 13:53 .
drwxrwxr-x 19 monstr monstr 4096 Dec 31 13:55 ..

drwxrwxr-x  2 monstr monstr 4096 Dec 31 13:53 CVS
-rw-rw-r--  1 monstr monstr 1115 Oct  9 19:55 GNUmakefile
-rw-rw-r--  1 monstr monstr 1482 Oct  9 19:55 ltp-cap.m4
-rw-rw-r--  1 monstr monstr  221 Jul  6 17:34 ltp-cgroupstats.m4
-rw-rw-r--  1 monstr monstr  191 Oct  9 19:55 ltp-crypto.m4
-rw-rw-r--  1 monstr monstr 1519 Oct 19 00:36 ltp-eventfd.m4
-rw-rw-r--  1 monstr monstr 1200 Nov 18  2008 ltp-modify_ldt.m4
-rw-rw-r--  1 monstr monstr 1216 Dec 23 01:05 ltp-numa.m4
-rw-rw-r--  1 monstr monstr 1466 Dec 20 00:38 ltp-ptrace.m4
-rw-rw-r--  1 monstr monstr 2024 Dec 20 01:36 ltp-quota.m4
-rw-rw-r--  1 monstr monstr 1225 Mar 16  2009 ltp-selinux.m4
-rw-rw-r--  1 monstr monstr 2794 Dec 20 01:39 ltp-signalfd.m4
-rw-rw-r--  1 monstr monstr 1429 Nov 30 13:26 ltp-signal.m4
-rw-rw-r--  1 monstr monstr 1416 Oct 17 08:53 ltp-taskstats.m4
-rw-rw-r--  1 monstr monstr  975 Oct 17 04:43 ltp-unshare.m4
-rw-rw-r--  1 monstr monstr   37 Jan 18  2009 Makefile.am

[monstr@monstr ltp]$ aclocal -I m4 --verbose
aclocal: found macro AC_PROG_AR in configure.ac: 22
aclocal: found macro AC_PROG_STRIP in configure.ac: 26
aclocal: found macro LTP_CHECK_SYSCALL_UNSHARE in m4/ltp-unshare.m4: 25
aclocal: found macro LTP_CHECK_TASKSTATS in m4/ltp-taskstats.m4: 19
aclocal: found macro _LTP_CHECK_TASKSTATS_FREEPAGES in m4/ltp-taskstats.m4: 30
aclocal: found macro LTP_CHECK_SYSCALL_SIGNALFD in m4/ltp-signalfd.m4: 38
aclocal: found macro _LTP_CHECK_SYSCALL_SIGNALFD_FUNCTION in m4/ltp-signalfd.m4: 52
aclocal: found macro _LTP_CHECK_SYSCALL_SIGNALFD_HEADER in m4/ltp-signalfd.m4: 59
...
and many others - which is ok. But

[monstr@monstr ltp]$ autoreconf -I m4 --install --verbose
autoreconf: Entering directory `.'
autoreconf: configure.ac: not using Gettext
autoreconf: running: aclocal -I m4
autoreconf: configure.ac: tracing
autoreconf: configure.ac: adding subdirectory testcases/kernel/syscalls/libevent to autoreconf
autoreconf: Entering directory `testcases/kernel/syscalls/libevent'
autoreconf: configure.in: not using Gettext
aclocal: couldn't open directory `m4': No such file or directory
autoreconf: aclocal failed with exit status: 1

seems to me that is problem with tools versions. :-(

Michal

Quoted 134 lines · Garrett Cooper

Yeah, I usually don't top-post, but emailing via smartphones is fun, so... :)
It sounds like your sources are incomplete -- 1) do you have an m4 directory at the top of the source tree and 2) is it populated with m4 files?
Thanks,
-Garrett
PS your tools' versions look ok.
Quoted 119 lines · Michal Simek
Hi,
sorry for head quoting but it is better for your phone.:-) I have interesting fault.
aclocal -I m4 works
but
autoreconf -I m4
aclocal: couldn't open directory `m4': No such file or directory
autoreconf: aclocal failed with exit status: 1
Which versions do you use?
autoconf - 2.65
automake - 1.11
m4 - 1.4.13
Thanks,
Michal
Quoted 95 lines · Garrett Cooper
Michal,
Just invoke autoreconf -I m4 and you'll get your desired result.
No commit required (except maybe another 'recipe' in INSTALL -- which I'd be more than happy to do after the 5th when I have real Internet access ;]...). The problem with your proposed method is that it was skipping a large number of autoconf portability tests in the .m4 files, thus the configuration was pretty minimal... Cheers!
-Garrett
Sent from my iPhone
Quoted 83 lines · Michal Simek
Hi Garret,
I am trying to configure LTP properly.
First thing which seems to me weird is that in INSTALL is for "Using autoconf" command make autotools
autoreconf --install
There are some warnings which could be fixed.
then I am running
./configure --prefix=/tmp/
and I see there
./configure: line 4566: LTP_CHECK_CAPABILITY_SUPPORT: command not found ./configure: line 4567: LTP_CHECK_CRYPTO: command not found ./configure: line 4568: LTP_CHECK_LINUX_PTRACE: command not found ./configure: line 4569: LTP_CHECK_SELINUX: command not found ./configure: line 4570: LTP_CHECK_SIGNAL: command not found ./configure: line 4571: LTP_CHECK_SYSCALL_EVENTFD: command not found ./configure: line 4572: LTP_CHECK_SYSCALL_MODIFY_LDT: command not found ./configure: line 4573: LTP_CHECK_SYSCALL_NUMA: command not found ./configure: line 4574: LTP_CHECK_SYSCALL_QUOTACTL: command not found ./configure: line 4575: LTP_CHECK_SYSCALL_SIGNALFD: command not found ./configure: line 4576: LTP_CHECK_SYSCALL_UNSHARE: command not found ./configure: line 4577: LTP_CHECK_TASKSTATS: command not found
./configure: line 4759: REALTIME_CHECK_PRIO_INHERIT: command not found ./configure: line 4760: REALTIME_CHECK_ROBUST_APIS: command not found
+ there are some missing dependency in configure.ac file. This patch should add them. I just grep whole LTP source - maybe some are not important.
configure.ac +15 -0
index 52f3381..7a72b36 100644
@@ -39,11 +39,26 @@ AC_CHECK_HEADERS([ \
   linux/mempolicy.h \
   linux/module.h \
   linux/netlink.h \
+    linux/ptrace.h \
+    linux/cgroupstats.h \
+    linux/taskstats.h \
+    linux/types.h \
   sys/acl.h \
   sys/epoll.h \
   sys/inotify.h \
+    sys/ptrace.h \
+    sys/reg.h \
+    asm/ldt.h \
+    asm/ptrace.h \
   sys/jfsdmapi.h \
   sys/prctl.h \
+    sys/epoll.h \
+    sys/ptrace.h \
+    sys/reg.h \
+    sys/stat.h \
+    sys/time.h \
+    sys/types.h \
+    sys/vfs.h \
 ])
 
 
and then run make - there previous fault in configure caused that there are wrong symbols in Makefiles - for example for my case.
microblaze-unknown-linux-gnu-gcc: @SELINUX_LIBS@: No such file or directory
which is caused by problems in configure.
Thanks for fixing,
Michal
Signature · 4 lines
Michal Simek, Ing. (M.Eng)
PetaLogix - Linux Solutions for a Reconfigurable World
w: www.petalogix.com p: +61-7-30090663,+42-0-721842854 f: 
+61-7-30090663
Signature · 3 lines
Michal Simek, Ing. (M.Eng)
PetaLogix - Linux Solutions for a Reconfigurable World
w: www.petalogix.com p: +61-7-30090663,+42-0-721842854 f: +61-7-30090663

Signature · 14 lines

Michal Simek, Ing. (M.Eng)
PetaLogix - Linux Solutions for a Reconfigurable World
w: www.petalogix.com p: +61-7-30090663,+42-0-721842854 f: +61-7-30090663

------------------------------------------------------------------------------
This SF.Net email is sponsored by the Verizon Developer Community
Take advantage of Verizon's best-in-class app development support
A streamlined, 14 day to market process makes app distribution fast and easy
Join now and get one step closer to millions of Verizon customers
http://p.sf.net/sfu/verizon-dev2dev 
_______________________________________________
Ltp-list mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/ltp-list

Garrett Cooper

2009-12-31 20:33 UTC #5 lore raw

Quoted 53 lines · Michal Simek

My source is up-to-date - I did clean cvs copy again for sure.
[monstr@monstr ltp]$ ls -la m4/
total 72
drwxrwxr-x 3 monstr monstr 4096 Dec 31 13:53 .
drwxrwxr-x 19 monstr monstr 4096 Dec 31 13:55 ..
drwxrwxr-x 2 monstr monstr 4096 Dec 31 13:53 CVS
(quoted diff) +0 ~~-15~~
-rw-rw-r--  1 monstr monstr 1115 Oct  9 19:55 GNUmakefile
-rw-rw-r--  1 monstr monstr 1482 Oct  9 19:55 ltp-cap.m4
-rw-rw-r--  1 monstr monstr  221 Jul  6 17:34 ltp-cgroupstats.m4
-rw-rw-r--  1 monstr monstr  191 Oct  9 19:55 ltp-crypto.m4
-rw-rw-r--  1 monstr monstr 1519 Oct 19 00:36 ltp-eventfd.m4
-rw-rw-r--  1 monstr monstr 1200 Nov 18  2008 ltp-modify_ldt.m4
-rw-rw-r--  1 monstr monstr 1216 Dec 23 01:05 ltp-numa.m4
-rw-rw-r--  1 monstr monstr 1466 Dec 20 00:38 ltp-ptrace.m4
-rw-rw-r--  1 monstr monstr 2024 Dec 20 01:36 ltp-quota.m4
-rw-rw-r--  1 monstr monstr 1225 Mar 16  2009 ltp-selinux.m4
-rw-rw-r--  1 monstr monstr 2794 Dec 20 01:39 ltp-signalfd.m4
-rw-rw-r--  1 monstr monstr 1429 Nov 30 13:26 ltp-signal.m4
-rw-rw-r--  1 monstr monstr 1416 Oct 17 08:53 ltp-taskstats.m4
-rw-rw-r--  1 monstr monstr  975 Oct 17 04:43 ltp-unshare.m4
-rw-rw-r--  1 monstr monstr   37 Jan 18  2009 Makefile.am
[monstr@monstr ltp]$ aclocal -I m4 --verbose
aclocal: found macro AC_PROG_AR in configure.ac: 22
aclocal: found macro AC_PROG_STRIP in configure.ac: 26
aclocal: found macro LTP_CHECK_SYSCALL_UNSHARE in m4/ltp-unshare.m4:
25
aclocal: found macro LTP_CHECK_TASKSTATS in m4/ltp-taskstats.m4: 19
aclocal: found macro _LTP_CHECK_TASKSTATS_FREEPAGES in m4/ltp- taskstats.m4: 30
aclocal: found macro LTP_CHECK_SYSCALL_SIGNALFD in m4/ltp- signalfd.m4: 38
aclocal: found macro _LTP_CHECK_SYSCALL_SIGNALFD_FUNCTION in m4/ltp- signalfd.m4: 52
aclocal: found macro _LTP_CHECK_SYSCALL_SIGNALFD_HEADER in m4/ltp- signalfd.m4: 59
...
and many others - which is ok. But
[monstr@monstr ltp]$ autoreconf -I m4 --install --verbose
autoreconf: Entering directory `.'
autoreconf: configure.ac: not using Gettext
autoreconf: running: aclocal -I m4
autoreconf: configure.ac: tracing
autoreconf: configure.ac: adding subdirectory testcases/kernel/ syscalls/libevent to autoreconf
autoreconf: Entering directory `testcases/kernel/syscalls/libevent'
autoreconf: configure.in: not using Gettext
aclocal: couldn't open directory `m4': No such file or directory
autoreconf: aclocal failed with exit status: 1

Quoted 1 line

seems to me that is problem with tools versions. :-(

This is different though -- it's cd'ing to testcases/kernel/syscalls/ libevent, looking for m4 and failing... Which is weird because it doesn't match the behavior that I have with my version...

If you do -I $PWD/m4, I'll almost guarantee that it'll work.

Hth,
-Garrett

Quoted 129 lines

Quoted 128 lines · Garrett Cooper
Yeah, I usually don't top-post, but emailing via smartphones is fun, so... :)
It sounds like your sources are incomplete -- 1) do you have an m4 directory at the top of the source tree and 2) is it populated with m4 files?
Thanks,
-Garrett
PS your tools' versions look ok.
On Dec 29, 2009, at 12:40 AM, Michal Simek <[email protected]
Quoted 119 lines
wrote:
Hi,
sorry for head quoting but it is better for your phone.:-) I have interesting fault.
aclocal -I m4 works
but
autoreconf -I m4
aclocal: couldn't open directory `m4': No such file or directory
autoreconf: aclocal failed with exit status: 1
Which versions do you use?
autoconf - 2.65
automake - 1.11
m4 - 1.4.13
Thanks,
Michal
Quoted 100 lines · Garrett Cooper
Michal,
Just invoke autoreconf -I m4 and you'll get your desired
result. No commit required (except maybe another 'recipe' in INSTALL -- which I'd be more than happy to do after the 5th when I have real Internet access ;]...). The problem with your proposed method is that it was skipping a large number of autoconf portability tests in the .m4 files, thus the configuration was pretty minimal...
Cheers!
-Garrett
Sent from my iPhone
On Dec 28, 2009, at 8:29 AM, Michal Simek <[email protected]
Quoted 88 lines
wrote:
Hi Garret,
I am trying to configure LTP properly.
First thing which seems to me weird is that in INSTALL is for "Using autoconf" command make autotools
autoreconf --install
There are some warnings which could be fixed.
then I am running
./configure --prefix=/tmp/
and I see there
./configure: line 4566: LTP_CHECK_CAPABILITY_SUPPORT: command not found
./configure: line 4567: LTP_CHECK_CRYPTO: command not found ./configure: line 4568: LTP_CHECK_LINUX_PTRACE: command not found ./configure: line 4569: LTP_CHECK_SELINUX: command not found ./configure: line 4570: LTP_CHECK_SIGNAL: command not found ./configure: line 4571: LTP_CHECK_SYSCALL_EVENTFD: command not found
./configure: line 4572: LTP_CHECK_SYSCALL_MODIFY_LDT: command not found
./configure: line 4573: LTP_CHECK_SYSCALL_NUMA: command not found ./configure: line 4574: LTP_CHECK_SYSCALL_QUOTACTL: command not found
./configure: line 4575: LTP_CHECK_SYSCALL_SIGNALFD: command not found
./configure: line 4576: LTP_CHECK_SYSCALL_UNSHARE: command not found
./configure: line 4577: LTP_CHECK_TASKSTATS: command not found
./configure: line 4759: REALTIME_CHECK_PRIO_INHERIT: command not found
./configure: line 4760: REALTIME_CHECK_ROBUST_APIS: command not found
+ there are some missing dependency in configure.ac file. This patch should add them. I just grep whole LTP source - maybe some are not important.
configure.ac +15 -0
index 52f3381..7a72b36 100644
@@ -39,11 +39,26 @@ AC_CHECK_HEADERS([ \
  linux/mempolicy.h \
  linux/module.h \
  linux/netlink.h \
+    linux/ptrace.h \
+    linux/cgroupstats.h \
+    linux/taskstats.h \
+    linux/types.h \
  sys/acl.h \
  sys/epoll.h \
  sys/inotify.h \
+    sys/ptrace.h \
+    sys/reg.h \
+    asm/ldt.h \
+    asm/ptrace.h \
  sys/jfsdmapi.h \
  sys/prctl.h \
+    sys/epoll.h \
+    sys/ptrace.h \
+    sys/reg.h \
+    sys/stat.h \
+    sys/time.h \
+    sys/types.h \
+    sys/vfs.h \
 ])
 
 
and then run make - there previous fault in configure caused that there are wrong symbols in Makefiles - for example for my case.
microblaze-unknown-linux-gnu-gcc: @SELINUX_LIBS@: No such file or directory
which is caused by problems in configure.
Thanks for fixing,
Michal

Quoted 16 lines

Quoted 10 lines

Quoted 4 lines

Signature · 3 lines

Michal Simek, Ing. (M.Eng)
PetaLogix - Linux Solutions for a Reconfigurable World
w: www.petalogix.com p: +61-7-30090663,+42-0-721842854 f: +61-7-30090663

Signature · 3 lines

Michal Simek, Ing. (M.Eng)
PetaLogix - Linux Solutions for a Reconfigurable World
w: www.petalogix.com p: +61-7-30090663,+42-0-721842854 f: +61-7-30090663

Signature · 3 lines

Michal Simek, Ing. (M.Eng)
PetaLogix - Linux Solutions for a Reconfigurable World
w: www.petalogix.com p: +61-7-30090663,+42-0-721842854 f: +61-7-30090663

Michal Simek

author

2010-01-02 13:11 UTC #6 lore raw

Quoted 12 lines

Quoted 12 lines
[monstr@monstr ltp]$ autoreconf -I m4 --install --verbose
autoreconf: Entering directory `.'
autoreconf: configure.ac: not using Gettext
autoreconf: running: aclocal -I m4
autoreconf: configure.ac: tracing
autoreconf: configure.ac: adding subdirectory testcases/kernel/syscalls/libevent to autoreconf
autoreconf: Entering directory `testcases/kernel/syscalls/libevent'
autoreconf: configure.in: not using Gettext
aclocal: couldn't open directory `m4': No such file or directory
autoreconf: aclocal failed with exit status: 1

Quoted 6 lines

Quoted 1 line
seems to me that is problem with tools versions. :-(
This is different though -- it's cd'ing to testcases/kernel/syscalls/libevent, looking for m4 and failing... Which is weird because it doesn't match the behavior that I have with my version...

If you want to know any other version which I use let me know.

Quoted 2 lines

If you do -I $PWD/m4, I'll almost guarantee that it'll work.

yes it is working. It is good to add realtime/m4 too.

autoreconf -I $PWD/m4 -I $PWD/testcases/realtime/m4/ --install --verbose --force
./configure --prefix=/tmp/ CC=microblaze-unknown-linux-gnu-gcc --host=microblaze

Can you run make distclean and then reconfigure setting?

Thanks,
Michal

Quoted 145 lines

Hth,
-Garrett
Quoted 140 lines
Quoted 133 lines · Garrett Cooper
Yeah, I usually don't top-post, but emailing via smartphones is fun, so... :)
It sounds like your sources are incomplete -- 1) do you have an m4 directory at the top of the source tree and 2) is it populated with m4 files?
Thanks,
-Garrett
PS your tools' versions look ok.
Quoted 123 lines · Michal Simek
Hi,
sorry for head quoting but it is better for your phone.:-) I have interesting fault.
aclocal -I m4 works
but
autoreconf -I m4
aclocal: couldn't open directory `m4': No such file or directory
autoreconf: aclocal failed with exit status: 1
Which versions do you use?
autoconf - 2.65
automake - 1.11
m4 - 1.4.13
Thanks,
Michal
Quoted 98 lines · Garrett Cooper
Michal,
Just invoke autoreconf -I m4 and you'll get your desired result.
No commit required (except maybe another 'recipe' in INSTALL -- which I'd be more than happy to do after the 5th when I have real Internet access ;]...). The problem with your proposed method is that it was skipping a large number of autoconf portability tests in the .m4 files, thus the configuration was pretty minimal... Cheers!
-Garrett
Sent from my iPhone
Quoted 86 lines · Michal Simek
Hi Garret,
I am trying to configure LTP properly.
First thing which seems to me weird is that in INSTALL is for "Using autoconf" command make autotools
autoreconf --install
There are some warnings which could be fixed.
then I am running
./configure --prefix=/tmp/
and I see there
./configure: line 4566: LTP_CHECK_CAPABILITY_SUPPORT: command not found
./configure: line 4567: LTP_CHECK_CRYPTO: command not found ./configure: line 4568: LTP_CHECK_LINUX_PTRACE: command not found ./configure: line 4569: LTP_CHECK_SELINUX: command not found ./configure: line 4570: LTP_CHECK_SIGNAL: command not found ./configure: line 4571: LTP_CHECK_SYSCALL_EVENTFD: command not found ./configure: line 4572: LTP_CHECK_SYSCALL_MODIFY_LDT: command not found
./configure: line 4573: LTP_CHECK_SYSCALL_NUMA: command not found ./configure: line 4574: LTP_CHECK_SYSCALL_QUOTACTL: command not found ./configure: line 4575: LTP_CHECK_SYSCALL_SIGNALFD: command not found ./configure: line 4576: LTP_CHECK_SYSCALL_UNSHARE: command not found ./configure: line 4577: LTP_CHECK_TASKSTATS: command not found
./configure: line 4759: REALTIME_CHECK_PRIO_INHERIT: command not found
./configure: line 4760: REALTIME_CHECK_ROBUST_APIS: command not found
+ there are some missing dependency in configure.ac file. This patch should add them. I just grep whole LTP source - maybe some are not important.
configure.ac +15 -0
index 52f3381..7a72b36 100644
@@ -39,11 +39,26 @@ AC_CHECK_HEADERS([ \
  linux/mempolicy.h \
  linux/module.h \
  linux/netlink.h \
+    linux/ptrace.h \
+    linux/cgroupstats.h \
+    linux/taskstats.h \
+    linux/types.h \
  sys/acl.h \
  sys/epoll.h \
  sys/inotify.h \
+    sys/ptrace.h \
+    sys/reg.h \
+    asm/ldt.h \
+    asm/ptrace.h \
  sys/jfsdmapi.h \
  sys/prctl.h \
+    sys/epoll.h \
+    sys/ptrace.h \
+    sys/reg.h \
+    sys/stat.h \
+    sys/time.h \
+    sys/types.h \
+    sys/vfs.h \
 ])
 
 
and then run make - there previous fault in configure caused that there are wrong symbols in Makefiles - for example for my case.
microblaze-unknown-linux-gnu-gcc: @SELINUX_LIBS@: No such file or directory
which is caused by problems in configure.
Thanks for fixing,
Michal
Signature · 4 lines
Michal Simek, Ing. (M.Eng)
PetaLogix - Linux Solutions for a Reconfigurable World
w: www.petalogix.com p: +61-7-30090663,+42-0-721842854 f: 
+61-7-30090663
Signature · 4 lines
Michal Simek, Ing. (M.Eng)
PetaLogix - Linux Solutions for a Reconfigurable World
w: www.petalogix.com p: +61-7-30090663,+42-0-721842854 f: 
+61-7-30090663
Signature · 3 lines
Michal Simek, Ing. (M.Eng)
PetaLogix - Linux Solutions for a Reconfigurable World
w: www.petalogix.com p: +61-7-30090663,+42-0-721842854 f: +61-7-30090663

Signature · 14 lines

Michal Simek, Ing. (M.Eng)
PetaLogix - Linux Solutions for a Reconfigurable World
w: www.petalogix.com p: +61-7-30090663,+42-0-721842854 f: +61-7-30090663

------------------------------------------------------------------------------
This SF.Net email is sponsored by the Verizon Developer Community
Take advantage of Verizon's best-in-class app development support
A streamlined, 14 day to market process makes app distribution fast and easy
Join now and get one step closer to millions of Verizon customers
http://p.sf.net/sfu/verizon-dev2dev 
_______________________________________________
Ltp-list mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/ltp-list