Skip to contentSkip to conversation

block: make PCI device id constant

PATCH New Németh Márton 1 participant 1 message Jan 10, 2010 Block layer

lore
Share & tools
lore
#0 lore raw

PATCH 1/5 block: make PCI device id constant

From: Márton Németh <[email protected]>

The id_table field of the struct pci_driver is constant in <linux/pci.h> so it is worth to make the initialization data also constant.

The semantic match that finds this kind of pattern is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@r@
disable decl_init,const_decl_init;
identifier I1, I2, x;
@@

	struct I1 {
	  ...
	  const struct I2 *x;
	  ...
	};

@s@
identifier r.I1, y;
identifier r.x, E;
@@

	struct I1 y = {
	  .x = E,
	};

@c@
identifier r.I2;
identifier s.E;
@@

	const struct I2 E[] = ... ;

@depends on !c@
identifier r.I2;
identifier s.E;
@@
+ const

	struct I2 E[] = ...;

// </smpl>

---

drivers/block/DAC960.c 2010-01-08 09:16:28.000000000 +0100 renamed from drivers/block/DAC960.c 2010-01-07 19:08:39.000000000 +0100 +1 -1
diff -u -p a/drivers/block/DAC960.c b/drivers/block/DAC960.c
@@ -7134,7 +7134,7 @@ static struct DAC960_privdata DAC960_P_p
 	.MemoryWindowSize =	DAC960_PD_RegisterWindowSize,
 };
 
-static struct pci_device_id DAC960_id_table[] = {
+static const struct pci_device_id DAC960_id_table[] = {
 	{
 		.vendor 	= PCI_VENDOR_ID_MYLEX,
 		.device		= PCI_DEVICE_ID_MYLEX_DAC960_GEM,
drivers/block/sx8.c 2010-01-08 09:27:47.000000000 +0100 renamed from drivers/block/sx8.c 2009-12-03 04:51:21.000000000 +0100 +1 -1
diff -u -p a/drivers/block/sx8.c b/drivers/block/sx8.c
@@ -409,7 +409,7 @@ static int carm_init_one (struct pci_dev
 static void carm_remove_one (struct pci_dev *pdev);
 static int carm_bdev_getgeo(struct block_device *bdev, struct hd_geometry *geo);
 
-static struct pci_device_id carm_pci_tbl[] = {
+static const struct pci_device_id carm_pci_tbl[] = {
 	{ PCI_VENDOR_ID_PROMISE, 0x8000, PCI_ANY_ID, PCI_ANY_ID, 0, 0, },
 	{ PCI_VENDOR_ID_PROMISE, 0x8002, PCI_ANY_ID, PCI_ANY_ID, 0, 0, },
 	{ }	/* terminate list */