Additional AT91 machine configurations (untested, and requires AT91SAM9G45EK patchset before use)

From: Ulf Samuelsson <[email protected]>

Add machine configurations using the two new include files provided by the AT91SAM9G45 BSP
(AT91.inc and AT91-LCD.inc in machine/include)

These have not been tested on a board yet, but will allow other people to test and perhaps merge.

---

index 87311e9..b0c34fa 100644
@@ -1,28 +1,14 @@
 #@TYPE: Machine
-#@Name: Atmel AT91CAP9ADK Development Platform
-#@DESCRIPTION: Machine configuration for the at91cap9adk development

board with a at91cap9500 processor
+#@Name: Atmel AT91CAP9STK Development Platform +#@DESCRIPTION: Machine configuration for the at91cap9stk development board with a at91cap9500 processor

-TARGET_ARCH = "arm"

-PREFERRED_PROVIDER_virtual/kernel = "linux"
-PREFERRED_VERSION_linux = "2.6.28"
-PREFERRED_PROVIDER_xserver = "xserver-kdrive"
+include conf/machine/include/AT91-LCD.inc

-KERNEL_IMAGETYPE = "uImage"
-UBOOT_MACHINE = "at91cap9adk_config"
+# Has no linux config file in OpenEmbedded
+LINUX26_DEFCONFIG = "at91cap9adk_defconfig"
+UBOOT_MACHINE = "at91cap9stk_config"
+AT91BOOTSTRAP_BOARD = "at91cap9stk"

-PREFERRED_VERSION_at91bootstrap = "2.10"
+MACHINE_FEATURES += "usbhost"

-#don't try to access tty1
-USE_VT = "0"
-
-MACHINE_FEATURES = "kernel26 alsa ext2 usbhost usbgadget screen touchscreen"
-EXTRA_IMAGEDEPENDS += "u-boot"
-#EXTRA_IMAGEDEPENDS += "at91bootstrap"
-
-# used by sysvinit_2
-SERIAL_CONSOLE = "115200 ttyS0"
-IMAGE_FSTYPES ?= "jffs2"
-EXTRA_IMAGECMD_jffs2 = "--pad --little-endian --eraseblock=0x20000 -n" -
-require conf/machine/include/tune-arm926ejs.inc

b/conf/machine/at91sam9260ek.conf
index 9a7ca9a..c112f59 100644

@@ -2,28 +2,12 @@
 #@Name: Atmel AT91SAM9260EK Development Platform
 #@DESCRIPTION: Machine configuration for the at91sam9260ek development

board with a at91sam9260 processor

-TARGET_ARCH = "arm"
-#PACKAGE_EXTRA_ARCHS = "armv4t armv5te"

-PREFERRED_PROVIDER_virtual/kernel = "linux"
-PREFERRED_VERSION_linux = "2.6.28"
-PREFERRED_PROVIDER_xserver = "xserver-kdrive"
+include conf/machine/include/AT91.inc

-KERNEL_IMAGETYPE = "uImage"
+# Has linux config file in OpenEmbedded
+# LINUX26_DEFCONFIG = "at91sam9260ek_defconfig"
UBOOT_MACHINE = "at91sam9260ek_config"
+AT91BOOTSTRAP_BOARD = "at91sam9260ek"

-PREFERRED_VERSION_at91bootstrap = "2.10"
-
-#don't try to access tty1
-USE_VT = "0"
-
-MACHINE_FEATURES = "kernel26 alsa ext2 usbhost usbgadget" -EXTRA_IMAGEDEPENDS += "u-boot"
-EXTRA_IMAGEDEPENDS += "at91bootstrap"
-
-# used by sysvinit_2
-SERIAL_CONSOLE = "115200 ttyS0"
-IMAGE_FSTYPES ?= "jffs2"
-EXTRA_IMAGECMD_jffs2 = "--pad --little-endian --eraseblock=0x20000 -n" -
-require conf/machine/include/tune-arm926ejs.inc +MACHINE_FEATURES += "usbhost"

b/conf/machine/at91sam9261ek.conf
index 79f275f..dee2206 100644

@@ -2,28 +2,13 @@
 #@Name: Atmel AT91SAM9261EK Development Platform
 #@DESCRIPTION: Machine configuration for the at91sam9261ek development

board with a at91sam9261 processor

-TARGET_ARCH = "arm"
-#PACKAGE_EXTRA_ARCHS = "armv4t armv5te"

-PREFERRED_PROVIDER_virtual/kernel = "linux"
-PREFERRED_VERSION_linux = "2.6.28"
-PREFERRED_PROVIDER_xserver = "xserver-kdrive"
+include conf/machine/include/AT91-LCD.inc

-KERNEL_IMAGETYPE = "uImage"
+# Has linux config file in OpenEmbedded
+# LINUX26_DEFCONFIG = "at91sam9261ek_defconfig"
UBOOT_MACHINE = "at91sam9261ek_config"
+AT91BOOTSTRAP_BOARD = "at91sam9261ek"

-PREFERRED_VERSION_at91bootstrap = "2.10"
+MACHINE_FEATURES += "usbhost"

-#don't try to access tty1
-USE_VT = "0"
-
-MACHINE_FEATURES = "kernel26 alsa ext2 usbhost usbgadget screen touchscreen"
-EXTRA_IMAGEDEPENDS += "u-boot"
-EXTRA_IMAGEDEPENDS += "at91bootstrap"
-
-# used by sysvinit_2
-SERIAL_CONSOLE = "115200 ttyS0"
-IMAGE_FSTYPES ?= "jffs2"
-EXTRA_IMAGECMD_jffs2 = "--pad --little-endian --eraseblock=0x20000 -n" -
-require conf/machine/include/tune-arm926ejs.inc

b/conf/machine/at91sam9263ek.conf
index f052170..ef07360 100644

@@ -2,29 +2,12 @@
 #@Name: Atmel AT91SAM9263EK Development Platform
 #@DESCRIPTION: Machine configuration for the at91sam9263ek development

board with a at91sam9263 processor

-TARGET_ARCH = "arm"
-#PACKAGE_EXTRA_ARCHS = "armv4t armv5te"

-PREFERRED_PROVIDER_virtual/kernel = "linux"
-PREFERRED_VERSION_linux = "2.6.28"
-PREFERRED_PROVIDER_xserver = "xserver-kdrive"
+include conf/machine/include/AT91-LCD.inc

-KERNEL_IMAGETYPE = "uImage"
+# Has linux config file in OpenEmbedded
+# LINUX26_DEFCONFIG = "at91sam9263ek_defconfig"
UBOOT_MACHINE = "at91sam9263ek_config"
+AT91BOOTSTRAP_BOARD = "at91sam9263ek"

-PREFERRED_VERSION_at91bootstrap = "2.10"
-
-#don't try to access tty1
-USE_VT = "0"
-
-MACHINE_FEATURES = "kernel26 alsa ext2 usbhost usbgadget screen touchscreen"
-EXTRA_IMAGEDEPENDS += "u-boot"
-EXTRA_IMAGEDEPENDS += "at91bootstrap"
-
-# used by sysvinit_2
-SERIAL_CONSOLE = "115200 ttyS0"
-IMAGE_FSTYPES ?= "jffs2"
-EXTRA_IMAGECMD_jffs2 = "--pad --little-endian --eraseblock=0x20000 -n" -
-require conf/machine/include/tune-arm926ejs.inc
-
+MACHINE_FEATURES += "usbhost"

b/conf/machine/at91sam9g20ek.conf
index 7dc6ba0..2cc7016 100644

@@ -2,26 +2,13 @@
 #@Name: Atmel AT91SAM9G20EK Development Platform
 #@DESCRIPTION: Machine configuration for the at91sam9g20ek development

board with a at91sam9g20 processor

-TARGET_ARCH = "arm"

-PREFERRED_PROVIDER_virtual/kernel = "linux"
-PREFERRED_VERSION_linux = "2.6.28"
-PREFERRED_PROVIDER_xserver = "xserver-kdrive"
+include conf/machine/include/AT91.inc

-KERNEL_IMAGETYPE = "uImage"
+# Has linux config file in OpenEmbedded
+# LINUX26_DEFCONFIG = "at91sam9g20ek_defconfig"
UBOOT_MACHINE = "at91sam9g20ek_config"
+AT91BOOTSTRAP_BOARD = "at91sam9g20ek"

-PREFERRED_VERSION_at91bootstrap = "2.10"
+MACHINE_FEATURES += "usbhost"

-#don't try to access tty1
-USE_VT = "0"
-
-MACHINE_FEATURES = "kernel26 alsa ext2 usbhost usbgadget" -EXTRA_IMAGEDEPENDS += "at91bootstrap u-boot"
-
-# used by sysvinit_2
-SERIAL_CONSOLE = "115200 ttyS0"
-IMAGE_FSTYPES ?= "jffs2"
-EXTRA_IMAGECMD_jffs2 = "--pad --little-endian --eraseblock=0x20000 -n" -
-require conf/machine/include/tune-arm926ejs.inc

index f7a78dc..3c1cb87 100644
@@ -2,29 +2,13 @@
 #@Name: Atmel AT91SAM9RLEK Development Platform
 #@DESCRIPTION: Machine configuration for the at91sam9rlek development

board with a at91sam9rl64 processor

-TARGET_ARCH = "arm"
-#PACKAGE_EXTRA_ARCHS = "armv4t armv5te"

-PREFERRED_PROVIDER_virtual/kernel = "linux"
-PREFERRED_VERSION_linux = "2.6.28"
-PREFERRED_PROVIDER_xserver = "xserver-kdrive"
+include conf/machine/include/AT91-LCD.inc

-KERNEL_IMAGETYPE = "uImage"
+# Has no linux config file in OpenEmbedded
+LINUX26_DEFCONFIG = "at91sam9rlek_defconfig"
UBOOT_MACHINE = "at91sam9rlek_config"
+AT91BOOTSTRAP_BOARD = "at91sam9rlek"

-PREFERRED_VERSION_at91bootstrap = "2.10"
-
-#don't try to access tty1
-USE_VT = "0"
-
-MACHINE_FEATURES = "kernel26 alsa ext2 usbhost usbgadget screen touchscreen"
-EXTRA_IMAGEDEPENDS += "u-boot"
-#EXTRA_IMAGEDEPENDS += "at91bootstrap"
-
-# used by sysvinit_2
-SERIAL_CONSOLE = "115200 ttyS0"
-IMAGE_FSTYPES ?= "jffs2"
-EXTRA_IMAGECMD_jffs2 = "--pad --little-endian --eraseblock=0x20000 -n" -
-require conf/machine/include/tune-arm926ejs.inc
+# MACHINE_FEATURES += "usbhost" - no host on this one!

Best Regards
Ulf Samuelsson