Skip to contentSkip to conversation

bt819: cleanup v4l2_subdev_notify() parameters

PATCH New Németh Márton 1 participant 1 message Jan 16, 2010 Media (V4L/DVB)

lore
Share & tools
lore

Németh Márton

author
#0 lore raw

PATCH 1/1 bt819: cleanup v4l2_subdev_notify() parameters

From: Márton Németh <[email protected]>

The 3rd parameter v4l2_subdev_notify() is passed to the notify() callback which is a pointer, see <media/v4l2-subdev.h> and <media/v4l2-device.h>.

This will remove the following sparse warning (see "make C=1"):
* Using plain integer as NULL pointer

Signed-off-by Márton Németh <[email protected]>

---

linux/drivers/media/video/bt819.c +5 -5
diff -r 5bcdcc072b6d linux/drivers/media/video/bt819.c
@@ -260,7 +260,7 @@
 		v4l2_err(sd, "no notify found!\n");
 
 	if (std & V4L2_STD_NTSC) {
-		v4l2_subdev_notify(sd, BT819_FIFO_RESET_LOW, 0);
+		v4l2_subdev_notify(sd, BT819_FIFO_RESET_LOW, NULL);
 		bt819_setbit(decoder, 0x01, 0, 1);
 		bt819_setbit(decoder, 0x01, 1, 0);
 		bt819_setbit(decoder, 0x01, 5, 0);

@@ -269,7 +269,7 @@
 		/* bt819_setbit(decoder, 0x1a,  5, 1); */
 		timing = &timing_data[1];
 	} else if (std & V4L2_STD_PAL) {
-		v4l2_subdev_notify(sd, BT819_FIFO_RESET_LOW, 0);
+		v4l2_subdev_notify(sd, BT819_FIFO_RESET_LOW, NULL);
 		bt819_setbit(decoder, 0x01, 0, 1);
 		bt819_setbit(decoder, 0x01, 1, 1);
 		bt819_setbit(decoder, 0x01, 5, 1);

@@ -294,7 +294,7 @@
 	bt819_write(decoder, 0x08, (timing->hscale >> 8) & 0xff);
 	bt819_write(decoder, 0x09, timing->hscale & 0xff);
 	decoder->norm = std;
-	v4l2_subdev_notify(sd, BT819_FIFO_RESET_HIGH, 0);
+	v4l2_subdev_notify(sd, BT819_FIFO_RESET_HIGH, NULL);
 	return 0;
 }
 

@@ -312,7 +312,7 @@
 		v4l2_err(sd, "no notify found!\n");
 
 	if (decoder->input != input) {
-		v4l2_subdev_notify(sd, BT819_FIFO_RESET_LOW, 0);
+		v4l2_subdev_notify(sd, BT819_FIFO_RESET_LOW, NULL);
 		decoder->input = input;
 		/* select mode */
 		if (decoder->input == 0) {

@@ -322,7 +322,7 @@
 			bt819_setbit(decoder, 0x0b, 6, 1);
 			bt819_setbit(decoder, 0x1a, 1, 0);
 		}
-		v4l2_subdev_notify(sd, BT819_FIFO_RESET_HIGH, 0);
+		v4l2_subdev_notify(sd, BT819_FIFO_RESET_HIGH, NULL);
 	}
 	return 0;
 }