Dell activity led WMI driver
My team has created a simple driver to control the Activity LED on Dell laptops intended for the Education market. The Activity LED is visible externally in the lid so Teachers can observe it from their desks. This driver works on the shipping Latitude 2100 series platforms as well as others to be released in the future. The driver follows the existing LED class driver API (leds-class.txt), so it will easily allow anybody to write an application to control the LED. Attached is dell_led.c
This has been internally reviewed, and we are ready for outside review and feedback. My colleagues have identified the dell-wmi module as a suitable container in lieu of a stand-alone module specifically for this driver, which makes sense, but we welcome advice. We are submitting it as a stand-alone module for now because that is how we developed and tested it. We would like this to be included upstream after it has been reviewed.
We look forward to your feedback. Thanks in advance.
Regards,
Bob Rodgers
Engineering Lead, Dell LED Control Project
Direct Tel: (512) 725-0665
Direct FAX: (512) 283-8994
/*
* dell_led.c - Dell LED Driver
*
* Copyright (C) 2010 Dell Inc.
* Louis Davis <[email protected]>
* Jim Dailey <[email protected]>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as
* published by the Free Software Foundation.
*
*/
#include <linux/platform_device.h>
#include <linux/acpi.h>
#include <linux/leds.h>
MODULE_AUTHOR("Louis Davis/Jim Dailey");MODULE_DESCRIPTION("Dell LED Control Driver");MODULE_LICENSE("GPL");
#define DELL_LED_BIOS_GUID "F6E4FE6E-909D-47cb-8BAB-C9F6F2F8D396" MODULE_ALIAS("wmi:" DELL_LED_BIOS_GUID);
// Error Result Codes:
#define INVALID_DEVICE_ID 250
#define INVALID_PARAMETER 251
#define INVALID_BUFFER 252
#define INTERFACE_ERROR 253
#define UNSUPPORTED_COMMAND 254
#define UNSPECIFIED_ERROR 255
// Devide ID
#define DEVICE_ID_PANEL_BACK 1
// LED Commands
#define CMD_LED_ON 16
#define CMD_LED_OFF 17
#define CMD_LED_BLINK 18
struct bios_args {
unsigned char Length;
unsigned char ResultCode;
unsigned char DeviceId;
unsigned char Command;
unsigned char OnTime;
unsigned char OffTime;
unsigned char Reserved[122];
};static int dell_led_perform_fn(u8 Length, u8 ResultCode, u8 DeviceId, u8 Command, u8 OnTime, u8 OffTime)
{
struct bios_args bios_return;
acpi_status status;
union acpi_object *obj;
struct acpi_buffer output = { ACPI_ALLOCATE_BUFFER, NULL };
struct acpi_buffer input;
struct bios_args args;
args.Length = Length;
args.ResultCode = ResultCode;
args.DeviceId = DeviceId;
args.Command = Command;
args.OnTime = OnTime;
args.OffTime = OffTime;
input.length = sizeof(struct bios_args);
input.pointer = &args;
status = wmi_evaluate_method(DELL_LED_BIOS_GUID, 1, 1, &input, &output);
obj = output.pointer;
if (!obj || obj->type != ACPI_TYPE_BUFFER)
return -EINVAL;
bios_return = *((struct bios_args *)obj->buffer.pointer);
// free the output ACPI object allocated by ACPI driver
kfree(obj);
return bios_return.ResultCode;
}static void led_on(void)
{
dell_led_perform_fn(3, // Length of command
INTERFACE_ERROR, // Init result code to INTERFACE_ERROR
DEVICE_ID_PANEL_BACK, // Device ID
CMD_LED_ON, // Command
0, // not used
0); // not used
}static void led_off(void)
{
dell_led_perform_fn(3, // Length of command
INTERFACE_ERROR, // Init result code to INTERFACE_ERROR
DEVICE_ID_PANEL_BACK, // Device ID
CMD_LED_OFF, // Command
0, // not used
0); // not used
}static void led_blink(unsigned char on_eighths, unsigned char off_eighths) {
dell_led_perform_fn(5, // Length of command
INTERFACE_ERROR, // Init result code to INTERFACE_ERROR
DEVICE_ID_PANEL_BACK, // Device ID
CMD_LED_BLINK, // Command
on_eighths, // blink on in eigths of a second
off_eighths); // blink off in eights of a second
}
static void dell_led_set(struct led_classdev *led_cdev,
enum led_brightness value)
{
if (value == LED_OFF)
{
led_off();
}
else
{
led_on();
}
}static int dell_led_blink(struct led_classdev *led_cdev,
unsigned long *delay_on, unsigned long *delay_off)
{
unsigned long on_eighths;
unsigned long off_eighths;
// The Dell LED delay is based on 125ms intervals.
// Need to round up to next interval.
on_eighths = (*delay_on + 124) / 125;
if (0 == on_eighths) on_eighths = 1;
if (on_eighths > 255) on_eighths = 255;
*delay_on = on_eighths * 125;
off_eighths = (*delay_off + 124) / 125;
if (0 == off_eighths) off_eighths = 1;
if (off_eighths > 255) off_eighths = 255;
*delay_off = off_eighths * 125;
led_blink(on_eighths, off_eighths);
return 0;
}static struct led_classdev dell_led = {
.name = "dell::lid",
.brightness = LED_OFF,
.max_brightness = 1,
.brightness_set = dell_led_set,
.blink_set = dell_led_blink,
.flags = LED_CORE_SUSPENDRESUME,
};static int __init dell_led_probe(struct platform_device *pdev)
{
return led_classdev_register(&pdev->dev, &dell_led);
}static int dell_led_remove(struct platform_device *pdev)
{
led_classdev_unregister(&dell_led);
return 0;
}static struct platform_driver dell_led_driver = {
.probe = dell_led_probe,
.remove = dell_led_remove,
.driver = {
.name = KBUILD_MODNAME,
.owner = THIS_MODULE,
},
};static struct platform_device *pdev;
static int __init dell_led_init(void)
{
int error = 0;
if (!wmi_has_guid(DELL_LED_BIOS_GUID)) {
printk(KERN_DEBUG KBUILD_MODNAME
": could not find: DELL_LED_BIOS_GUID\n");
return -ENODEV;
}
led_off();
error = platform_driver_register(&dell_led_driver);
if ( error < 0 )
return error;
pdev = platform_device_register_simple(KBUILD_MODNAME, -1, NULL, 0);
if (IS_ERR(pdev)) {
error = PTR_ERR(pdev);
platform_driver_unregister(&dell_led_driver);
}
return error;
}static void __exit dell_led_exit(void)
{
platform_driver_unregister(&dell_led_driver);
platform_device_unregister(pdev);
led_off();
}module_init(dell_led_init);module_exit(dell_led_exit);
Quoted 7 lines · Bob Rodgers
This has been internally reviewed, and we are ready for outside review and feedback. My colleagues have identified the dell-wmi module as a suitable container in lieu of a stand-alone module specifically for this driver, which makes sense, but we welcome advice. We are submitting it as a stand-alone module for now because that is how we developed and tested it. We would like this to be included upstream after it has been reviewed.
It uses a different GUID to the event interface used by dell-wmi, so right now there's no inherent reason to integrate it into that rather than keeping it as a separate driver. On the other hand, if the GUID is useful for other kinds of system control rather than just the LED then dell-wmi may want to make use of that functionality in the future. In that case we'd need it to be incorporated into the dell-wmi driver.
So, really, it depends on the interface. If this GUID is specific to LEDs, then keep it separate. Otherwise it should be integrated.
I've got a few comments on the code...
Quoted 1 line
// Error Result Codes:
C99 style comments are usually discouraged in the kernel.
Quoted 1 line
// Devide ID
Typo?
Quoted 4 lines
// LED Commands
#defineCMD_LED_ON16
#defineCMD_LED_OFF17
#defineCMD_LED_BLINK18
Use of whitespace isn't very consistent here.
Quoted 9 lines
struct bios_args {
unsigned char Length;
unsigned char ResultCode;
unsigned char DeviceId;
unsigned char Command;
unsigned char OnTime;
unsigned char OffTime;
unsigned char Reserved[122];
};Mm. We're also not usually big on CamelCasing in variable names - it'd be preferable to use underscores. That's true for the rest of this, too.
Quoted 1 line
// free the output ACPI object allocated by ACPI driver
Probably don't need this comment.
Quoted 9 lines
static void
led_on(void){ dell_led_perform_fn(3, // Length of command INTERFACE_ERROR, // Init result code to INTERFACE_ERROR DEVICE_ID_PANEL_BACK, // Device ID CMD_LED_ON, // Command 0, // not used 0); // not used }
Whitespace is a bit odd here, again.
Other than that, it looks good. You probably want to run it through Scripts/checkpatch.pl in the kernel tree to perform further style checks, but I can't see any functional issues.
Signature · 1 line
Matthew Garrett | [email protected]
Quoted 75 lines · Bob Rodgers
My team has created a simple driver to control the Activity LED on Dell laptops intended for the Education market. The Activity LED is visible externally in the lid so Teachers can observe it from their desks. This driver works on the shipping Latitude 2100 series platforms as well as others to be released in the future. The driver follows the existing LED class driver API (leds-class.txt), so it will easily allow anybody to write an application to control the LED. Attached is
dell_led.cThis has been internally reviewed, and we are ready for outside review and feedback. My colleagues have identified the dell-wmi module as a suitable container in lieu of a stand-alone module specifically for this driver, which makes sense, but we welcome advice. We are submitting it as a stand-alone module for now because that is how we developed and tested it. We would like this to be included upstream after it has been reviewed.
We look forward to your feedback. Thanks in advance.
Regards,
Bob Rodgers
Engineering Lead, Dell LED Control Project
Direct Tel: (512) 725-0665
Direct FAX: (512) 283-8994/*
*dell_led.c- Dell LED Driver
*
* Copyright (C) 2010 Dell Inc.
* Louis Davis <[email protected]>
* Jim Dailey <[email protected]>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as
* published by the Free Software Foundation.
*
*/#include <
linux/platform_device.h>
#include <linux/acpi.h>
#include <linux/leds.h>
MODULE_AUTHOR("Louis Davis/Jim Dailey");MODULE_DESCRIPTION("Dell LED Control Driver");MODULE_LICENSE("GPL");#define
DELL_LED_BIOS_GUID"F6E4FE6E-909D-47cb-8BAB-C9F6F2F8D396"MODULE_ALIAS("wmi:" DELL_LED_BIOS_GUID);// Error Result Codes:
#defineINVALID_DEVICE_ID250
#defineINVALID_PARAMETER251
#defineINVALID_BUFFER252
#defineINTERFACE_ERROR253
#defineUNSUPPORTED_COMMAND254
#defineUNSPECIFIED_ERROR255// Devide ID
#defineDEVICE_ID_PANEL_BACK1// LED Commands
#defineCMD_LED_ON16
#defineCMD_LED_OFF17
#defineCMD_LED_BLINK18struct bios_args { unsigned char Length; unsigned char ResultCode; unsigned char DeviceId; unsigned char Command; unsigned char OnTime; unsigned char OffTime; unsigned char Reserved[122]; };
Quoted 3 lines
static int
dell_led_perform_fn(u8 Length, u8 ResultCode, u8 DeviceId, u8 Command, u8 OnTime, u8 OffTime){ struct bios_args bios_return;
It would be better to not put the bios_return struct on the stack. Make it a pointer and use kmalloc().
It's a pity the Makefile bits weren't included.
regards,
dan carpenter