Support for Belkin dongle
I have a Belkin bluetooth dongle:
Bus 002 Device 005: ID 050d:0084 Belkin Components F8T003v2 Bluetooth
I believe this was supported in Linux long ago, but is no longer recognized. The following patch seems sufficient against 2.6.32.7.
The device is found, but I have not tested it in any meaningful way.
Cheers.
hci0: Type: USB
BD Address: 00:0A:3A:5B:19:3C ACL MTU: 192:8 SCO MTU: 64:8
UP RUNNING PSCAN
RX bytes:738 acl:0 sco:0 events:28 errors:0
TX bytes:109 acl:0 sco:0 commands:27 errors:0btusb.c 2010-02-08 13:20:46.000000000 -0800 renamed from btusb.c.orig 2010-02-08 13:20:15.000000000 -0800 +1 -0
@@ -113,6 +113,7 @@ /* Belkin F8T012 and F8T013 devices */ { USB_DEVICE(0x050d, 0x0012), .driver_info = BTUSB_WRONG_SCO_MTU }, { USB_DEVICE(0x050d, 0x0013), .driver_info = BTUSB_WRONG_SCO_MTU }, + { USB_DEVICE(0x050d, 0x0084), .driver_info = BTUSB_WRONG_SCO_MTU }, /* Asus WL-BTD202 device */ { USB_DEVICE(0x0b05, 0x1715), .driver_info = BTUSB_WRONG_SCO_MTU },
Please forgive the obviously broken line wrap here, but it's only single line.
Marcel Holtmann
maintainerHi Peter,
Quoted 9 lines
I have a Belkin bluetooth dongle:
Bus 002 Device 005: ID 050d:0084 Belkin Components F8T003v2 Bluetooth
I believe this was supported in Linux long ago, but is no longer recognized. The following patch seems sufficient against 2.6.32.7.
The device is found, but I have not tested it in any meaningful way.
I doubt it. Can you send content of /proc/bus/usb/devices for this device and the output of hciconfig -a without this patch. I need to verify that it is really needed.
Regards
Marcel