arm: add support for the suen3_p1b_p1c board from keymile
PATCH v4 4/4 arm: add support for the suen3_p1b_p1c board from keymile
This patch adds support for the Keymile suen3_p1b_p1c board which is based on the Marvell Kirkwood (88F6281) SoC. As this is a variant of the mgcoge2_arm_p1a board, this board also uses common code stored in board/keymile/km_arm/km_arm.c
---
- changes since v1:
added comments from Wolfgang Denk:
get rid of flash_info_t define in board config (to get this working patch 1/2 is introduced/needed)
- changes since v2:
added comments from Wolfgang Denk
- rearranged if/else in do_spi_toggle()
- added I/O accessor functions for bootcounter
- changes since v3:
added comment Scott Wood
- removed nand_init in do_spi_toggle()
added comments from Prafulla Wadagaskar
- km-arm.h renamed to km_arm.h
- reworked eeprom_write_enable() (deleted it) (when reviewing this function, it cropped up, that this pin is connected through a gpio pin, not as in previous version, through the boco (a FPGA))
- moved set_sda(), set_scl(), get_sda(), get_scl() to km_arm.c
- split patch in 4 patches (for each board an extra patch)
- renamed sdramregs.txt in kwbimage.cfg, also license info added.
MAINTAINERS | 2 +- MAKEALL | 1 + Makefile | 3 +- include/configs/suen3_p1b_p1c.h | 102 +++++++++++++++++++++++++++++++++++++++ 4 files changed, 106 insertions(+), 2 deletions(-) create mode 100644 include/configs/suen3_p1b_p1c.h
MAINTAINERS +1 -1
@@ -413,9 +413,9 @@ Heiko Schocher <[email protected]> sc3 PPC405GP suen3 ARM926EJS (Kirkwood SoC) suen3_p1a ARM926EJS (Kirkwood SoC) + suen3_p1b_p1c ARM926EJS (Kirkwood SoC) uc101 MPC5200 - Peter De Schrijver <[email protected]> ML2 PPC4xx
MAKEALL +1 -0
@@ -582,6 +582,7 @@ LIST_ARM9=" \ spear600 \ suen3 \ suen3_p1a \ + suen3_p1b_p1c \ trab \ VCMA9 \ versatile \
Makefile +2 -1
@@ -3051,7 +3051,8 @@ spear600_config : unconfig @$(MKCONFIG) -n $@ -t $(@:_config=) spear6xx arm arm926ejs $(@:_config=) spear spear suen3_config \ -suen3_p1a_config: unconfig +suen3_p1a_config \ +suen3_p1b_p1c_config: unconfig @$(MKCONFIG) $(@:_config=) arm arm926ejs km_arm keymile kirkwood SX1_stdout_serial_config \
include/configs/suen3_p1b_p1c.h new file +102 -0
102 lines not on this page · raw message
Signature · 5 lines
1.6.2.5 -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany